CURVED GAMING MONITOR
USER’S MANUAL
VIOTEK
USER MANUAL
Read and observe the following warnings and informationas below. Viotek shall
not be held responsible for injury or damage of products or persons due to failure
to adhere to these precautions.
Safety Precautions and Maintenance
1. Before cleaning, always unplug your monitor. It is recommended to use dry
cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the
safest. If using damp cloth, wait for your monitor to completely dry before
plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your
monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid
blocking these openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources ex: portable heater or
heating vent, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor's
screen.
6. Do not insert anything into any part of the monitor including the ventilation
openings.
7. Always make sure your monitor is placed on a secure, level surface to
prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of time where it will not
be used.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not attempt to dissemble the monitor or remove parts from this monitor.
Any disassembly or modification etc. not performed by an authorized
technician can result in damage to the monitor and/or possible exposure to
high voltage electricity which may lead to serious injury or death.
Viotek shall not be held responsible for injury or damage of products or persons
due to failure to adhere to the aforementioned precautions or any others noted
hereafter.
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-1-
Menu /Enter Exit Power ON/OFFUpDown
Control Panel
The Control Panel is located at the corner of the monitor. Its labels are on the front
of the monitor while its buttons are located directly under the labels on the bottom
edge. The Control Panel is used in combination with the OSD Menu to adjust the
monitor settings. Review the images below for information about this panel.
Menu/Enter: Opens the main menu of the OSD
Down: Moves down/lower while navigating
Up: Moves up/higher while navigating
Exit: Exits the current menu screen and returns to the main menu,
or closes the menu if currently on the main menu screen
Power: Turns the monitor on or off.
Note: Both the Down and Up buttons may be mapped to keyboard hotkeys if
desired.
OSD Menu
The On-Screen Display (OSD) Menu may be used to adjust your monitor's settings
and appears on screen after turning on the monitor and pressing the Control
Panel's Menu/Enter Key.
Note: When using the monitor for the first time, settings will automatically adjust
to optimal settings according to your computer's configuration and parts etc.
Box Contents
1x Monitor
1x Power Cable (AC 100-240V 50/60Hz)
1x HDMI Cable
1x Warranty Card
1x User manual
Basic Setup
1. Insert one end of the VGA video cable into your PC's graphics card. DVI or
HDMI may also be used, cables not included.
2. Connect the other end of the video cable to the corresponding connector on
your monitor. See the image below.
3. Connect the power cable to your monitor then connect the other end to your
power source such as a wall outlet or surge protector. It is recommended to
use a surge protector.
4. Turn on your monitor.
Indicator Light
This light is located on the front of the monitor.
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source has been detected. Please ensure your
PC is on and all video cables are fully inserted and/or connected.
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-2-
DP connectorDVI connector HDMI connector AC.IN connector
Menu /Enter Exit Power ON/OFFUpDown
Control Panel
The Control Panel is located at the corner of the monitor. Its labels are on the front
of the monitor while its buttons are located directly under the labels on the bottom
edge. The Control Panel is used in combination with the OSD Menu to adjust the
monitor settings. Review the images below for information about this panel.
Menu/Enter: Opens the main menu of the OSD
Down: Moves down/lower while navigating
Up: Moves up/higher while navigating
Exit: Exits the current menu screen and returns to the main menu,
or closes the menu if currently on the main menu screen
Power: Turns the monitor on or off.
Note: Both the Down and Up buttons may be mapped to keyboard hotkeys if
desired.
OSD Menu
The On-Screen Display (OSD) Menu may be used to adjust your monitor's settings
and appears on screen after turning on the monitor and pressing the Control
Panel's Menu/Enter Key.
Note: When using the monitor for the first time, settings will automatically adjust
to optimal settings according to your computer's configuration and parts etc.
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-3-
Adjust
Other
Exit NONE NONE NONE NONE Exit the menu
Main Menu
Item
Adjustment Settings
Main Menu
Item
Main
Menu
Icon
Submenu
Item
Main
Menu
Icon
Submenu
Options
Main
Menu
Icon
Description
BRIGHTNESS NONE NONE NONE NONE Adjusts brightness
Contrast NONE NONE NONE NONE Adjusts contrast
DCR
On NONE NONE Start dynamic contrast
Off NONE NONE Close dynamic contrast
Return NONE NONE Return to previous menu
Exit NONE NONE Exit the menu
Mode
Standard NONE NONE Normal usage patterns
Movie NONE NONE
Watching movie application
patterns
FPS NONE NONE FPS game patterns
RTS NONE NONE RTS game patterns
EyeSaver NONE NONE
Eyes care blue light
application patterns
Return NONE NONE Return to previous menu
Exit NONE NONE Exit the menu
Color Temp.
Cool NONE NONE Setas color temperature
Warm NONE NONE Setas Warm temperature
User
Red
Adjustment red color
temperature
Green
Adjustment green color
temperature
Blue
Adjustment green color
temperature
Return NONE NONE Return to previous menu
Exit NONE NONE Exit the menu
Aspect
Auto NONE NONE
Automatically adjust the
image ratio
16:9 NONE NONE
Adjust image for widescreen
patterns
4:3 NONE NONE Adjust image for 4:3 patterns
Return NONE NONE Return to previous menu
Exit NONE NONE Exit the menu
Input
DVI NONE NONE DVI (digital ) signal input
HDMI NONE NONE HDMI (digital ) signal input
DP NONE NONE
Dispayport (digital ) signal
input
Return NONE NONE Return to previous menu
Exit NONE NONE Exit the menu
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-4-
自定 义
护眼
滤蓝光
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-5-
Adjust
Auto
adjust
NONE NONE
Automatically adjust image
horizontal/vertical position,
Focus and Clock
Auto
color
NONE NONE
Color white balance
adjustment
Gamma
Gamma1
Adjust tone brightness , Gray
level 1
Gamma2
Adjust tone brightness , Gray
level 2
Return Return to previous menu
Exit Exit the menu
Other
Language
Chinese Chinese
English English
Return Return to previous menu
Exit Exit the menu
Power
Off
On
Power saving after minute
and auto power-off
Off
Close timing shutdown
function
Return Return to previous menu
Exit Exit the menu
Reset
YES Restore Factory Defaults
NO Exit the function
Return Return to previous menu
Exit Exit the menu
Over
driver
On
Start OD function (need
monitor support)
Off
Close OD function (need
monitor support)
Return Return to previous menu
Exit Exit the menu
SOUND NONE NONE
Adjust Volume(with Audio
type)
Return NONE NONE Return to previous menu
Exit NONE NONE Exit the menu
Exit NONE NONE NONE NONE Exit the menu
Main Menu
Item
Main
Menu
Icon
Submenu
Item
Main
Menu
Icon
Submenu
Options
Main
Menu
Icon
Description
ON
ON
Specifications
Link Mode--DVI/DP
Link Mode—HDMI
Note:
“O” support the corresponding resolution and refresh rate
“X” Said does not support the corresponding resolution and refresh rate
Troubleshooting
1. The screen is blank.
Be sure the power button has been pressed to turn the monitor on.
Confirm the brightness and contrast settings are set normally
Check if the Indicator Light is flashing, if so, this indicates there is no
signal from your video source
If your source is a notebook or laptop, be sure that its settings are in
mirror mode and the device itself is powered on.
2. The image is out of focus.
Ensure the video signal cable is inserted properly on both ends.
3. The screen is flashing.
Try an alternative power source as the current one causing the issue
may be insufficient or too week.
Ensure devices such as non-shielded speakers, fluorescent lighting, AC
transformers, table fans etc. are away from your screen to avoid
magnetic disturbances.
Press the Exit Key on the monitor to auto adjust the image and apply
optimum settings.
4. The color bleeds or visual effects appear unusual.
If your screen is all red, blue, or any colors disappear, check to see
that the signal cable is properly inserted. A loose connection can
cause a bad signal.
Ty connecting to another video source for comparison.
5. The screen appears to be scrolling or rolling or moving unusually.
Check that your source frequency is within 55-76Hz.
Reconnect and ensure your video source cable is secure.
6. The monitor needs cleaning.
Make sure the monitor has been powered off.
Always use a soft, non-abrasive cloth when cleaning.
Use dry, non-abrasive to gently remove debris or dust.
If necessary, lightly dampen a non-abrasive cloth with water and
gently clean the surface.
Never use alcohol or ammonia-base cleaning solutions.
Never spray liquid directly onto any part of the monitor.
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-6-
Panel diagonal
size
68.6cm(27") 16:09 597.9*336.3 0.3114 1920*1080
80.0cm(31.5") 16:09 698.4*392.85 0.3637 1920*1080
environment
temperature
humidity Relative Humidity 10% to 85%
display
scale
16:9
27"
31.5"
LED
SIZE
display
scale
16:9
27"
31.5"
LED
SIZE
Specifications
Link Mode--DVI/DP
Link Mode—HDMI
Note:
“O” support the corresponding resolution and refresh rate
“X” Said does not support the corresponding resolution and refresh rate
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-7-
Panel diagonal
size
dimension scale
picture size
（mm)
dot pitch
（mm)
optimum
resolution
68.6cm(27") 16:09 597.9*336.3 0.3114 1920*1080
80.0cm(31.5") 16:09 698.4*392.85 0.3637 1920*1080
environment
temperature
storage
temperature
-20°C - 60°C
end-use
temperature
0° - 45°C
humidity Relative Humidity 10% to 85%
display
scale
16:9
27"
31.5"
(
60/ 120/
144 Hz
)
(
60/ 120/
144 Hz
)
(
60/ 75/12 0/
144 Hz
)
(
60/ 120/
144 Hz
)
(
60/ 70/75 /
120 /144H z
)
(
60/ 75/72 .8Hz
)(
70H z
)
(
60/ 70/75 /
120 /144H z
)
(
60/ 120/
144 Hz
)
(
60/ 120/
144 Hz
)
(
60/ 120/
144 Hz
)
(
60/ 120/
144 Hz
)
LED
SIZE
the default resolution / refresh rate
display
scale
16:9
27"
31.5"
(
60/ 120Hz
)(
60/ 120Hz
)(
60/75/ 120Hz
)
(
60/ 120Hz
)
(
60/ 70/75 /
120 Hz
)
(
60/ 75/72 .8Hz
)(
70H z
)
(
60/ 70/75 /
120 Hz
)
(
60/ 120Hz
) (
60/ 120Hz
) (
60/ 120Hz
) (
60/ 120Hz
)
LED
SIZE
the default resolution / refresh rate
1 Year Limited Hardware Warranty
Viotek Inc. (Viotek) offers a ONE YEAR limited warranty covering the hardware of Viotek LED Monitor
(“Product”), limited to those residing in the 50 US States and Canada. This warranty gives you specific legal
rights and you may also have other rights which vary from state to state.
Viotek warrants the Product to be free from defects in materials and workmanship under normal use for one
(1) year, as sold to the original purchaser, from the date of retail purchase by the original end-user purchaser.
If a hardware defect arises and a valid claim is received within the warranty period, at its option and to the
extent permitted by law, Viotek will: (1) repair the hardware defect by using new or refurbished parts that are
equivalent to new in performance and reliability; or (2) exchange the product with a product that is new or
refurbished, that is substantially equivalent to the original product. This warranty is for replacement for likeitems only and does not cover items out of production if the company no longer stocks them. This warranty is
not assignable or transferable. The original purchaser may call the Viotek toll-free number at 1-855-229-9472
for service request.
Upon Viotek's replacement or repair of a Product under warranty, the original end-user purchaser will have
the remaining warranty under the original warranty period (without any postponement during repair or
replacement). When a product or part is exchanged, any replacement item becomes your property and the
replaced item becomes Viotek's property. Important: Do not disassemble the Product. Disassembling the
Product will void this warranty. Only Viotek or a party expressly authorized by Viotek should perform service
on this Product.
This warranty only covers technical hardware defectiveness during the warranty period and under normal use
conditions. Viotek does not warrant uninterrupted or error-free operation of this Product. This Warranty does
not apply to damages or circumstances, such as, but not limited to:
(a) Damage that is caused by conditions, malfunctions, or damage not resulting in from defects in material or
workmanship. These conditions include, but are not limited to, accidents, and improper operation or
maintenance;
(b) Product has been tampered with, repaired and/or modified by non-authorized personnel;
(c) Obsolescence;
(d) Damage (accidental or other) to the Product that is cosmetic, meaning damage that does not impact the
operation and functioning of the Product, such as without limitation to rust, change in color, texture or finish,
wear and tear, scrapes, scratches, dents, cracks, or gradual deterioration;
(e) Damage to the Product caused by war, terrorism, fire, accident, natural disaster, intentional or accidental
misuse, abuse, neglect or improper maintenance, use under abnormal conditions, accidental drops, abuse or
fire;
(f) Damage to the Product caused by an external electrical fault, surge, or any electrical anomaly;
(g) Any contamination, condition or other circumstance, which Viotek, in its sole discretion, considers a
danger to health and safety, including, but not limited to any contact between the Product and a biohazard,
bodily fluids, infectious materials/substance, chemicals, hazardous substances, diseases, radiation, or other;
(h) Fraud, theft, misplacement, unexplained disappearance, or willful acts.
DISCLAIMER OF WARRANTY
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY,
EXPRESS OR IMPLIED. AS PERMITTED BY APPLICABLE LAW, VIOTEK SPECIFICALLY DISCLAIMS ANY AND ALL
STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A
PARTICULAR PURPOSE, AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF VIOTEK CANNOT LAWFULLY
DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH
WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE
REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY VIOTEK IN ITS SOLE DISCRETION. NO RESELLER, AGENT,
OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. IF
ANY TERM(S) IS HELD ILLEGAL OR UNENFORCEABLE, THE LEGALITY AND ENFORCEABILITY OF THE REMAINING
TERMS SHALL NOT BE AFFECTED OR IMPAIRED.
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, VIOTEK IS NOT
RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
ANY BREACH OF WARRANTY OR CONDITION OR PERFORMANCE OF THE PRODUCT, OR UNDER ANY OTHER LEGAL
THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED
PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED
SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF,
DAMAGE TO, COMPROMISE, OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE
HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF
RECOVERING, PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE
PRODUCT AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. THE
FOREGOING LIMITATION SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS, OR ANY STATUTORY
LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR OMISSIONS. VIOTEK DISCLAIMS ANY
REPRESENTATION THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A
PRODUCT EXCHANGE, AND IS UNABLE TO RECOVER ANY USER SOFTWARE OR DATA ON THE DEVICE.
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Federal Communications Commission Notice
“Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help.
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-8-
All s pecif icati ons a nd inform ation s are subje ct to cha nge wit hou t not ice .
-9-
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, VIOTEK IS NOT
RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
ANY BREACH OF WARRANTY OR CONDITION OR PERFORMANCE OF THE PRODUCT, OR UNDER ANY OTHER LEGAL
THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED
PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED
SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF,
DAMAGE TO, COMPROMISE, OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE
HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF
RECOVERING, PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE
PRODUCT AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. THE
FOREGOING LIMITATION SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS, OR ANY STATUTORY
LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR OMISSIONS. VIOTEK DISCLAIMS ANY
REPRESENTATION THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A
PRODUCT EXCHANGE, AND IS UNABLE TO RECOVER ANY USER SOFTWARE OR DATA ON THE DEVICE.
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Federal Communications Commission Notice
“Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help.
Loading...