How it Works
VIOTEK
Loading...
GFT27DB
User manual
20 pgs3.52 Mb0

VIOTEK GFT27DB User manual

GFT27DB
USER MANUAL
OR ED GAMING MONIT
In order to c ontinue serving our customers and providing the best products, our product information
including our user manuals may receive updates from time to time. Please check our website for the
latest user manuals and product materials. Ver 1.0 10/29/18
Table of Contents
3.1 – Monitor Buttons ......................................................................... 5
3.2 – Monitor Ports ............................................................................. 5
6.1 – Connecting the Power Cable ..................................................... 8
6.2 – HDMI Connectivity .................................................................... 8
6.3 – DP Connectivity ........................................................................9
6.4 – Connecting Your Earphones ..................................................... 9
Section 7: Basic Operation ....................................................................10
Section 8: Indicator Light ....................................................................... 10
Section 9: OSD ........................................................................................11
9.1 – OSD Menu Functions ................................................................12
Section 10: LED Effects and Gameplus ................................................ 13
Section 11: Troubleshooting ..................................................................14
11.1 – General Problems .................................................................... 14
11.2 – PIP (Picture in Picture) Input Information ................................15
11.3 – PBP (Picture by Picture) Resolution Information ..................... 15
Section 12: Information .........................................................................16
12.1 – Specications ..........................................................................16
12.2 – Resolution Compatibility for DP ..............................................16
Section 13: 1 Year Limited Hardware Warranty ...................................17
2
Section 1: Safety Precautions
Read and observe the following warnings and information below.
1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid blocking these openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources e.g: portable heaters or heating vents, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen or any part of the monitor.
6. Do not inser t anything into any part of the monitor especially the ventilation openings.
7. Always make sure your monitor is placed on a secure, level surface to prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not attempt to disassemble or remove parts from the monitor. Any disassembly or
modication etc. not performed by an authorized technician can result in damage to the
monitor and/or possible exposure to high voltage electricity which may lead to serious injury or death.
VIOTEK® shall not be held responsible for injury or damage of products or persons due to failure to adhere to the aforementioned precautions or any others noted hereafter.
3
Section 2: Box Contents
Monitor x 1 Stand Stem x 1
(with Attached Bracket)
Decorative Cover x 2
Power Cable x 1
(AC 100-240V, 50/60Hz)
Stand Base x 1 Cable Clip x 1
8mm
14mm
NO. 1 Screws x 6 NO. 2 Screws x 4
(for Wall Mounting)
Screwdriver x 1
DP Cable x 1
17mm
User Manual x 1
• The NO.1 screws come in two types, 8mm and 14mm. Extra screws of each type may be
included.
4
Section 3: Product Overview
3.1 – Monitor Buttons
2 3 4 5 6 1
1
M Menu Button
2
Down Button
3
Up Button
4
E Exit Button
Power Button
5
6
LED Indicator: Changes colors to indicate status. Refer to Section 8.
The E button can also be used to switch between “Limit ” and “Full” color gamuts when
a compatible graphics card and either HDMI or DP connections are in use.
: Press to display the OSD menu or enter sub-menus. : Press to move down in the menus.
: Press to move up in the menus.
: Press to exit.
: Press to turn the monitor on/off.
3.2 – Monitor Ports
7 8 9 10
7
Audio Output DP Connector
8
nect the other end to the monitor’s DP por t.
HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI output
9
and connect the other end to the monitor’s HDMI por t.
Power Connector: Insert the power cable to supply power to the monitor.
10
:
Insert the audio cable for output of audio signals. : Insert one end of the DP cable into the computer’s DP output and con-
5
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table.
Stand Stem
Stand Base
Monitor
2. Take out the two main parts of the stand, the pad and the cable clip from the package. Next, use the included screwdriver and two NO.1 screws (14mm) to fasten the cable clip and base to the stem. Install the pad at the bottom of the base.
Cable Clip
Stand Stem
Foam
Stand Base
Pad
3. Remove the foam covering on back of mornitor, and use NO.1 screws (8mm) x 2 to fasten the stem onto monitor, then cover the decorative covers on it to complete installation.
To avoid damage, do not touch the screen when moving the monitor.
NO.1 Screws (14mm) x 2
Decorative Cover x 2
NO.1 Screws (8mm) x 2
6
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use