Page 1
32" 1080p LCD Television
V32LC76F
AiR (TV)/CABLE MODE SELECTION
The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory.
If you want to use an antenna for the built-in TV tuner, this menu option must be set to the
"Air" mode. Please refer to "6. Channel MENU" in page 14 of this manual for the details.
Page 2
Contents
Safety and warnings ...................................................................................... 2-4
Introduction ................................................................................................. 5
Installation .................................................................................................. 6-9
Remote Control .......................................................................................... 10
Operation .......................................................................................................... 14
Trouble Shooting .......................................................................................... 15
Page 3
IMPORTANT SAFETY INSTRUCTION
1.Read these safety instructions.
2.Keep these safety instructions.
3.tIeed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8.Do not install near any heat sources such as radiators,
stoves, or other apparatus {including amplifiers)that
produce heat.
9.Protect the power cord from being walked on or
pinched particularly at power outlets, and the point
where they exit from the apparatus.
10.Only use attachments/accessories specified by the
manufacturer.
11.Unplug this apparatus during lightning storms or
when unused for long periods of time.
12.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
13.Apparatus must not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, should be placed on the apparatus.
SA FE TYA ND WARNINGS
CAUTION
TO REDUCE TIlE RISK OF ELECTRIC SttOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
j_lk The symbol indicates that dangerous voltages
constitming a risk of electric shock are present
within this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
WARNING:
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
-2-
Page 4
SAFETYAND WARNINGS
High voltages are used in tbe operation of this television
receiver. Do not remove tbe cabinet back fl-om your set.
Refer se_wicing to qualified service personnel.
To prevent fire or electrical sbock hazard, do not expose
tbe television receiver to rain or moisture.
Do not drop or push objects into tbe television cabinet
slots or openings. Never spill any kind of liquid on tile
television receive*-.
Do not block the ventilation boles in the back cover.
Adequate ventilation is essential to prevent t_dlure of
electrical components.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it t_llls.
Do not place your television oil an unstable cart, stand,
shelf or table. Serious injury to an individual, and damage
to tile television, may result if it falls.
Wben the television receiver is not used for an
extended period of time, it is advisable to disconnect
tile AC power cord from tile AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give offbeat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, sucb as lighted candles on
tile televi sion.
Do not trap tile power supply cord under tile television
rcceiveE
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-
Page 5
SAFETYAND WARNINGS
Thank you very much for purchasing this TV. To enjoy
your product from the very beginning, read this manual
carcfldly and keep it handy for easy reference.
INSTALLATION
• Locate the TV in the worn where light does not strike
the screen directly.
• Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comt\_rtable viewing.
• Allow enough space between the TV and the wall to
permit ventilation.
• A'_oid extremely warm locations to prevent possible
damage to the cabinet or premature component failure.
a, This TV can be connected to AC 100-240 Volts. 50/60 ltz.
Never connect to a DC supply or any other power supply.
• Do not cover the ventilation openings when using the TV.
CAUT1ON
Never tamper with any components inside the TV. or any
other adjustment controls not mentioned in this manual.
All LCD-TVs are high voltage instruments. When you
clean up dust or water drops on the LCD PANEL or
CABINET. the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord and antenna
cord to prevent damage to your TV. All repairs to this TV
should only be pe*i\)ri_led by qualified TV service personnel.
Earthing connection--- The apparatus shall be connected
to MAINS socket outlet with a protective earthing connection o
MAINS plug or appliance coupler of the apparatus is used
as disconnect device, it should remains readily opembleo
Warning: Change or modifications to this unit not expressly
by the part responsible ti)r compliance could void the user's
authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmthl interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmfill
interference will not occur in a particular installation. If this
equipment does cause harmflll intel_'erence to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio TV technician
for help.
Shield cables must be used with this unit to ensure
compliance with the Class B FCC limits.
double insulation between hazardous mains voltage
[_ This symbol indicates that this productincorporates
and user accessible parts. When servicing use only
identical replacement parts.
WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or cords.
_4_
Page 6
INTROD UCTION
[] 1920 x 1080 native resolution %r FullqiD (1080p)
performance
[] IntegratedATSC TV tuner %r |tDTV broadcast reception
[] High brighmess provides a vivid and brilliant picture
[] Deeper blacks and brighter whites with high contrast
[] Wide Screen aspect ratio (16:9) %r a complete llome
theater experience
. HDMI input %r true digital connection
[] VGAport for connection to PC
[] Built-in stereo speaker system
[] Full-function Remote Control
Main parameter
Viewing Picture Size(diagonal)
Resolution:
Aspect Ratio:
TV System:
Video Signal System:
Receiving Channel:
Power consumption:
Input Power Voltage:
Audio Output Power(THD < 7%):
Rear High-Definition Multimedia Interl}lce(HDMl) Input
Rear S-Video Input
Side HDMI Input
YCb(Pb)Cr(Pr) Input
Rear Analog Audio Output
Rear Coaxial SPDIF Output
Analog RGB(VGA) Input
Rear Composite Video Input
Rear Audio Input
Side Composite Video Input
Side HEAD PHONE Output
Rear Composite Video Output
Horizontal definltlon(TV llne)
AC Power Cord .........................
Infrared Remote Control ...........
User's Manual ........................
Battery(AAA) ..........................
32inch
1920x1080
16:9
ATSC Digital system and NTSC Analog system
NTSCiPALiSECAM
Cable :1-135/Air: 2-69(ATV&DTV)
170W
AC 100V-240V 50/60tlz
2xSW
x2
xl
xl
xl
xl
xl
xl
xl
x3
x
x
x
Composite Video Input > 350
Video Input > 400
YCb(Pb)Cr(Pr) > 400
-5-
Page 7
INSTALLATION
l
1 : Remote control sensor.
2: Indicator LED: GREEN @ POWERON.
RED O STANDBY.
3: Keyboard
iiiiiiiiiiiiii ii! Avco.,ect ,,.
_:: cll-
_:: VOL
_ VOL-
_ S rANI)BY
/
/
!. SOURCE: Display the input source menu.
2. MENU: Display main MENU.
3. CH+/CH-:In TV mode, press "Cltl " or "CtI-" to
change the channel up and down.In MENU mode, press
"CtI4 " or "CII-" to select items .I11standby mode,
press "CtI_" or"Ctl_" to turn on theTV.
4. VOL+/VOL-:Adjust sound level.ha MENU mode,
press "VOL! " or "VOL-" to actiust the item that you
selected.
5. STANDBY : Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBYI
6.HEADPHONE OUTPUT
7.VIDEO INPUT
8.AUDIO IN PUT-L
9.AUDIO IN PUT-R
!0.HDMI3 INPUT
I IEAI)PI K)NR
VIDEO
L
R
IIDMI3
1. ttDMI1 INPUT 6. YPbPr INPUT 11. SPDIF OUTPUT
2. ttDMI2 INPUT 7. PCAUDIO INPUT 12.AUDIO OUTPUT
3. VGAINPUT 8. YPbPr AUDIO INPUT 13.ANT
4. AV1 INPUT 9. AV1iS-VIDEOAUDIO INPUT 14.AC POWER INPUT
5. S-VIDEO INPUT 10. VIDEO OUTPUT
Note:
1.AV1 and S-VIDEO share one audio channel.
2. WhenttDMll port get DVI signal, the "PC Audio" channel will change to receive the audio fromilDMll port
3. When tlDMl2 port get DVI signal, the "YPbPr Audio" channel will change to receive the audio from ilDMl2 port.
4.AV OUTPUT :
When the source are AV 1,AV2(side) S-VI DEO,ATV, the AV OUTPUT Channel reproduce the input
signals accordingly
-6-
Page 8
STEPS:
Be sure both the TV and computer are set to Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to VGA mode.
4.Power on the VGA.
This sequence is very important.
'N _" _ VGA cable
2 Power cord
PRESET MODE
INSTALLATION
.................................................................
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
1 720*400 70 31.47
2 640*480 60 31.47
3 640*480 72 37.86
4 640*480 75 37.50
5 800*600 56 35.156
6 800*600 60 37.88
7 800*600 72 48.08
8 800*600 75 46.88
9 1024"768 60 48.36
10 1024"768 70 56.48
11 1024"768 75 60.02
12 1280"1024 60 63.98
13 1280"1024 75 80.00
-7-
Page 9
+++++++_NNA
.........................................
Plug
@ @
T H iiiil °
, I1
IIIIII,_ !.....
An outdoor antenna
INS TA L LA TION
I++II
I++II
I_IH 7
ANT 75_! \__LEAD FEED ER(300tl) I
Adaptor (NOT SUPPLIED) '_
.......................................................................L..............................................................................................................................................................................................................................................................................................................................................
Loosen the screws Insert the feeder in Wires Tighten the screws
Note:
Aerial connections:lE( (female).
Input impendance:75 t_ unba hmced.
An indoor antenna
CATV net
<I
Page 10
INSTALLATION
This TV provides two groups of AV ,one S-Video,one group of YPbPr for convenient connection
to VCR,DVD or other video equipment,three group of IIDM1 for liD signal input Please refer to
the owner's manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
With VIDEO _, Output With VIDEO Input Terminal
terminal _ / ° L "
VIDEO EQUIPMENT ,_ll:-' T_ video ,__ n_c-i ,_ ¢_t
(_) Toaudio
(;" o_t t 9V...... U_R)_Y)L_TOVIDEO
/
.......? _ _ From Coaxial SPDIF with SPDIF Input
ii
@pr VIDEO EQUIPMENT with YPbPr
To audio , r11_=_ Terminal
To s-video
output ,_ VIDEO EQUIPMENT
!!
T!audo nput
outpllt term na
_m? with S-video
(_ Black (swideo}
_W_White(audol L}
_R_ Red(audlo R)
VIDEO RECORDER
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo
system, etc .....
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.
NOTE:
When HDMI3 port get DVI signal, the "AV2 Audio" channel will change to receive the audio from IIDMI3 port.
-9-
Page 11
POWER MUTE
O -- 4>
RECALL
@@@
@
@@@
MENU SOURCE
__
@
__
__
__
®
®--
@
Insert Batteries lnto the Remote Control
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure tile
polarity ( _ or -) of the batteries matches tile polarity
marks inside the unit
3. Mount tile battery cover.
Replace with new batteries when the TV set begins
to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV
set does not thnction with Remote Control Unit.
Remark:
1)Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if tile
remote control is not to be used tbr long time.
SLEEP P_ ASPECT
--@9
--@S
@}
-- @io;
REMOTE CONTROL
1: POWER
To set tile TV standby or on.
2: NUMBER KEY
For direct access to program.
3: MENU
To displayTV menu or to return to the previous menu.
4: CURSOR
To move within the menu.
5: EXIT
Used to exit menu.
6: VOL+/-
To adjust sound level.
7: P.M
To switch picture mode.
8: PAGE DOWN/PAGE UP
In EPG mode, use this key to page up/down the EPG
information.
9: SLEEP
Set time to turn oft'the TV.
10: P.G
Setting tile Parental Control level control.
11:MUTE
To disable or enable the sound.
12:RECALL
To access tile previously viewed program.
13:SOURCE
To display or exit TV input source menu.
14: ENTER
Confirms selection.
15: TV DISPLAY
Displays/removes the program hlformation
16:S.M
To switch sound mode.
17:CIt+/C It-
To access tile next or previous Program.
18: ASPECT
To change picture aspect.
19: CIt LIST
Used to display the channel list.
20: EPG
Display all the information of DTV programs.
21 : FAV
Used to access your favourite channels in digital TV mode.
22: ItDMI
ttot key directly go to }tDMI source.
23 : AV
ttot key directly go to AV source.
24: DTV STRENGTIt
Used to display the DTV signal strength menu.
25: TV
ttot key directly go to TV source.
26: YPbPr
ttot key directly go to YPbPr source.
27: CC
Enable or disable the CC function.
28: VGA
ttot key directly go to VGA source.
29: MTS/SAP
Switch the sound stereo, SAP and mono.
30: COLOR KEYS
Reserved keys
-I0-
Page 12
OPERATION
1. PIC3"URE MENU
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
Press VA. to select, press _l _ to adjust, press MENU
to exit.
Note:
If you want to adjust contrast, brightness, color,
and sharpness , the picture mode must return to
"personal" status.
2.AUDIO menu
The second item of the MENU is AUDIO MENU.
You can adjust sound here.
PressVA to select, press _1 !_ to adjust, press MENU
to exit.
3.TIMER MENU
The third item of the MENU is TIMER MENU.
You can adjust time here.
Press 'V"A to select, press 4 _ to adjust, press MEN U
to exit.
1).Sleep Timer: adjust this item, you can set the
sleep timer.
Note:
The item of Time zone, the item of Daylight Saving
Time and the item of Clock are available in ATSC
program
4. SETUP MENU
The forth item of the MENU is SETUP MENU.
You can setup system here.
Press v,6. to select, press "_1_ to adjust, press MENU
to exit.
Note:
The item of Audio language is available in ATSC
program.
Note:
Restore Default: Reset allthe settings to default
value.
Page 13
OPERATION
1).Advanced: In PCModeis available.
Press TA button to select Advanced item, Press
button, the screen will display as follow:
(1).tl-Pos:Adjust the horizontal position of the screen.
(2).V-Pos:Adjust the vertical position of the screen.
(3).Clock: Fine tune the screen width.
(4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
(5).Auto: Auto adjust to fit the screen.
2). Closed Caption: switch close caption mode.
Press'V'A button to select Closed Caption item,
Press _- button, the screen will display as follow:
5. P.G MENU
The fifth item of the MENU is P.G MENU.
You can setup Parental Control here.
Press V A to select, press '_ _- to adjust, press MENU
to exit.
Parent Control: input the password, itwill go into
Parental Control menu. Factory default password
is 6666.
5.! .Input the correct password ,the screen will display
as follow:
(1):Advanced Selection: only ATSC program is available.
(2):Option:Used to edit CC font.
Press _ button, the screen will display as follow:
NOTE: Only ATSC program is available.
1). Change Password: Press I_"button, the screen will
display as follow:
1).New Password: Input the new password
2).Confirm Password: Input the new password again
-12-
Page 14
OPERATION
5.2 P.G switch:
When the Parental Control switch is ON, the below
options can be adjusted.
5.3 US: Press _ button, the screen will displayas
follow:
I):TV: Press _. button, the screen will display as
follow:
L
(Ad*l]t
langilage)
I'V-Y {All
cllJldlell)
I'VY ?(Dil ect _o
_*_gges_ed order children)
r V-CJ_CJeneral
lge audJence/
rv.pG_p_ emal
CJuida,,ce
suggested)
¸1"%14IPalel,_s
s_,o,lgly
camJo,,ed)
rWMA/Matu, e
audience only)
And use ENTER key to switch lock," unlock Parental
Control feature.
x
x
x
x
x
x
x
x
x
dialog)
2).M PAA:switch the movie-rating control level: N/A,
G, PG, PG- 13,R,NC- 17,X.
Descriplion
G Gener d mdiences, All Ages kdmi_*ed
P_r_nt d Guid race st_ggesled Some m kleria] mk 5 no* be
PG Suitable l_)r children
Age PG-13 Inkpproprialell)rchildrenunderl3
P_ren/s strong] 5 c miioned goi_le m kleria] ink} be
Restric{ U nder 17 reqtdres kccomp msmg p krenI or aduh
R guardian( kge \aries in some iurisdicIions)
NC 17 No onel7andunderadnli_ed
X X is morderrtting{ll_tisunifiedx_i_llNC 17bu_mk} be
enc od ed in file d kl k of ord er 11]o_ ies
5.4 Canada: Press 1_ button, the screen will be
displayed as follow:
1): Canada English: switch the english rating control
IevcI:E,C,C8 ! ,G,PG,14 ! ,18 !.
@
Exempt: lncltldes news, sports, documents and othm ]nt%rmation
E
programming: talk shows, mtlsic videos, and variety programming
C
Children: Intended tor younger children under the age of 8 years.
Pays carettd attention to themes thai cotlld threaten their sense of
sectlrityand well being
C8
Children over 8 years old: Contains no portrayal of violence as the
preterred, acceptable, or onl 5 x_a5 to resolve conf]ict; nor encotlr Eg_
children to hnhne dangerotls acts ah ich the? ma 3 wee on the screen
G
Ag General: Considered acceptable Wr all age grotlps, Appropr{ Ere
x
x
viewing for me entire tamily, contains very lit{le violence, physical,
verbal or emotional
PG
Parental Guidance: Intended tor a general mdience, but may not be
st_itable tot younger children {under the age ot8) because h cotdd
contain controversial themes or isst_es
O_er 14 Years: Cotdd contain themes *_here _ iolence is one of the
14
dominant e]elnents of tile storsline BUt it must be integral to the
devel opment of plot or char rater gangtmge usage cotdd be profane
and nt_dhy, present within the context of theme
I 8 Adults: Intended tor viewers 18 years arid older and might contain
depictions of violence, which while related to the development of
plot, char rater or themes, are intended tot adult viewing Could
contain graph ic langt_age and portrayals of secretary and nt_dhy
-13-
Page 15
OPERATION
2).Canada French: switch the French_rating control
level: E, G,SANS !,13 ANS!,16ANS !,1SANS !.
Exempt programming
G General :All ages End children, contains minimal direct violence,
btlt may be integraled into the plol in a htmlorotls or unrealistic
manner
8arts General but inadvisable tk>r young children :May be viewed by a
wide ptlblic audience, but could contain scenes disttu bing to
children under 8 who cannot distinguish between imaginary and
real sittlalions Recommended {or yielding with parent
13arts Over 13 years: Could conlain scenes oI {reqtlenl violent scenes
and in lense violence
]6arts Over 16 years: Cotl]d contain {reqtlenl violem scenes and violence
18arts Over 18 years: Only tor adult viewing Cotdd contain {reqtlenl
violent scenes and extreme violence
5.5 RRT Setting: inATSC digital TV mode, it could be
adjusted
5.6 Reset RRT: Press _ button, the screen will be
displayed as follow:
1). Air,'Cable: select air TV signal or cable TV signal.
2). Auto Scan: If it's the first time using the TV. it
should scan all the TV channels first,
press the _ button to confirm, you will see below
n]enu :
A: Start to Scan: press the _ button to confirm, you
will see below menu which indicates auto search is
in process.
6. Channel MENU
The sixth item of the MENU is CtlANNEL MENU.
You can adjust digital and analoge TV channel here .
Press VA to move, press _ to adjust.
3). Favorite: Press _ _ button to choose/delete the
favorite channel .
4). Showittide: Press _1_ button to display or hide
currently channel.
5). Channel NO. :Display the currently channel number.
6). Channel LaNe: PressA'_ button to edit currently
channel nanle.
7). DTV Signal: Display DTV signal intension. It can't be
selected and adjusted.
_14_
Page 16
Trouble shooting
Trouble phenomenon Symptom
Picture
Snow Noise or connection
Ghost Normal audio or connection
ii_ __ electronic equip ..... t,cari
_, activated or if the audio system
Interference Noise motorcycle,fluorescent light
Normal Picture Mute connections are not correct)
No picture Mute setup
_r _ antenna position, direction
Audio
" antenna position, direction
/_.,_ Volume(check if mute is
Inspection Check
Power cord is not inserted
Contrast and brightness,'volume
Press standby key on the remote
control for inspecting
,OlOon -ol.....
Picture _ _ Normal audio retune channel
breaking up or weak
o o,ou . ....
The LCDTV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.
-15-
Page 17
VIORE TM LiMiTED WARRANTY
FLAT PANEL TELEViSiON
This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is
warranted by VmORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and
labor. However, there wifl be only a 90 day parts and labor limited warranty for commercial use.
This Limited Warranty does not apply to store display products and product somd as a "marked down" special, in "as is" condition, "close outs",
"liquidation and clearance sales", "open box", products missing accessories, no fault found or damaged at time of delivery to Viora.
Proof of purchase within one year from date of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is
within the limited warranty period. The Bill of Sale, Receipt or Receipted invoice must be presented as a pra-condition to obtaining the limited
warranty service.
This limited warranty begins on the original date of purchase, and is valid only on Products purchased through VIORE authorized dealers and
used in the United States, Canada, and Puerto Rico by the original purchaser. To receive warranty service, the purchaser must contact VIORE
for problem determination and service procedures. Warranty service may only be performed by a duly authorized VIORE service center. The
original dated bill of sale, receipt or receipted invoice must be presented upon request as proof of purchase to VlORE or VmORE'a authorized
service center.
VIORE will repair or if repairs cannot be made, VIORE will replace this Product at no charge with the same, like or similar Product if the
Product is defective as specified in this limited warranty during the limited warranty pedod. VmORE may use new or remanufactured parts or
products to repair or replace the Product at its sole discretion. All replaced parts and Products become the property of VIORE and must be
returned to VlORE. Replacement parts and Products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.
Product freight needs to be prepaid by original purchaser and shipped in either its original packaging or packaging affording an equal degree
of protection. VmORE shall not be responsible for or obligated to replace damaged goods, mf you reside in California and you cannot transport
the television due to the size, weight, and method of attachment, VIORE will provide transportation for the television to the repair facility. If
you reside in a state other than California, you are responsible for the costs of transporting the television to a repair facility.
if the product is received damaged by VIORE, it is the responsibility of the consumer to file a claim against the carrier. VIORE will only store
the damaged product for 30 days and reserves the right, in its sole discretion, to dispose of the damaged product or ship it back to the
consumer at consumer's expense after 30 days.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
Damage which occurs in shipment; demivery and instaJlafion; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, instanations, repairs, external wiring or connectors not
supplied or authorized by VIORE which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and
surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are
covered and prescribed in the instruction book; reception problems and distortion reJated to noise, echo, interference or other signal
transmission and delivery problems; burned-in images. VIORE does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS OR iMPLiED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR iMPLiED, iNCLUDiNG, BUT NOT LiMiTED TO, ANY iMPLiED WARRANTIES OF
MERCHANTABiLiTY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS
STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FiRM OR CORPORATION WiTH
RESPECT TO THiS PRODUCT SHALL BE BiNDiNG ON VIORE. REPAIR OR REPLACEMENT AS PROVIDED UNDER THiS LiMiTED
WARRANTY iS THE EXCLUSIVE REMEDY OF THE CONSUMER. VIORE SHALL NOT BE LIABLE FOR ANY iNCiDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR iMPLiED WARRANTY ON THiS PRODUCT; EXCEPT TO THE
EXTENT PROHiBiTED BY APPLICABLE LAW, ANY iMPLiED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THiS PRODUCT iS LiMiTED FOR THE DURATION OF THiS LiMiTED WARRANTY. THIS LiMiTED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORiGiNAL PURCHASER OF THiS PRODUCT, iS NONTRANSFERABLE AND STATES
YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty Jasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Any provision contained herein which is found contrary to state or local laws shaft be deemed null
and void and the remaining provisions shall continue in fuji force and effect.
To obtain warranty service, please contact VIORE at:
Ver. 091101 Printed in China
Phone: 1=877=777=1428(USA / Puerto Rico)
1=877=777=1429(Canada)
www.viore.com
Page 18
Viore,lnc.
7801 Hayvenhurst Avenue, Van Nuys,CA91406 Printed in China
Loading...