VIORE LC4OVXF6OSB User Manual

40" I080p LCD Television

LC4OVXF6OSB

AIR (TV)/CABLE MODE SELECTION

The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory.
If you want to use an antenna for the built-in TV tuner, this menu option must be set to the

"Air" mode. Please refer to page 25 of the owner's manual for the details of this menu.

FOR QUESTIONS OR TECHNICAL SUPPORT

Please call: 1-877-777-1428

Please do not return this TV to the store.

• Caution

• Safety Information ................................................................................ 2

• Names of each part(Front View) / Accessories ...................................................... 3

• Names of each part(Back View) .................................................................... 4

• Mounting on a Desktop / Installation Precautions .................................................... 5

• Installing an Antenna ............................................................................. 6

• Remote control ............................................................................... 7~8

• Precautions / How to use remote control ........................................................... 9

• VCR Connections / Watching Video Tape ........................................................... 10

• Satellite/Cable TV Set-Top Box Connections / Watching Cable TV ..................................... 11

• DVD Connections / Playing the DVD ............................................................... 12

° PC Connections / How to use as PC ............................................................... 13

.......................................................................................... 1

• Audio Amplifier and Monitor Connections / Digital Amplifier Connenction ............................... 14

• Powering the LCD TV / Selecting input source ....................................................... 15

( -

• Operating the Menu ............................................................................ 16

° Customizing the PICTURE Settings ............................................................... 17

• Customizing the SOUND Settings ................................................................. 18

• Customizing the TIMER Settings .................................................................. 19

• Customizing the SETUP Settings ............................................................... 20~21

• Customizing the LOCK Settings ................................................................ 22-24

• Customizing the CHANNEL Settings ........................................................... 25~26

° Support mode .................................................................................. 27

A

The lightening flash with arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of un-insulated "dangerous voltage"

within the products enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Correct disposal of this Product

Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste

collection/recycling centre.

In the European Union there are separate collection systems for used electrical

and electronic products. Please help us to conserve the environment we live in!

To ensure reliable and safe operation of this equipment, please read carefully all the

instructions in this user guide, especially the safety information below.

Electrical safety

• The TV set should only be connected to a mains supply which matches that stated on
the label.

• To prevent overload, don't share the same mains supply socket with too many other

items of equipment.

• Do not place any connecting wires where: they may be stepped on or tripped over.

• Do not place heavy items on them, which may damage the leads.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or while leaving the TV for long periods, set the switch off.

• Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or

moist areas, such as Bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if: the mains plug or cable is

damaged, liquid is spilt onto the set, or if it is accidentally exposed to water or moisture,
anything accidentally penetrates the ventilation slots, the set doesn't work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. You may

invalidate the warranty. This apparatus must only be serviced by qualified personnel.

• To avoid battery leakage, remove exhausted batteries from the remote control, or when

not using far a long period.

• Do not break open or throw exhausted batteries on a fire.

Physical safety

• Do not block ventilation slots in the hack cover. You may place the TV in a cabinet, but

ensure at least 5cm (2") clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good

care of the remote control.

• To clean the TV use a soft dry cloth. Do not use solvents or petrol based fluids.

• Do not install near any heat sources such as radiators, heat registers stoves or other

apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong, the wide blade or the third prong is provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Use only attachments/accessories specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the appara-
tus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, has been exposed to
rain or moisture, does not operate normally or has been dropped.

• Please always connect an apparatus with Class I structure to a main socket with protec-
tive earthing connection.

• Please make sure both main plug and appliance coupler work properly.

2

L._____J

O TV/AV button- Input Source Select Button O POWER button

MENU button- OSD Menu Display Button O LED Indicator

m

4ran

_!!

_11

zl|

_mn

_mn

._ | |

-0

m | |

CH+/- button - Channel/Program _,- Button _ Remote ControlWindow

VOL+/- button - Volume + - Button

® The configuration of the components may look different from the following illustration.

User's Manual

User'sGuide Power Cord Remote Control

3

_) HDMI2 jack O AV OUTVIDEOand AUDIO(R/L) _ RF

HDMII jack _ AV1 iN VIDEO and AUDIO(R/L) _, AC input jack

O PCa.dAUDIOjack O S-VIDEO @ SWITCH

AV2 iN VIDEO and AUDJO(RIL) O COAXIAL (Digital Audio out}
Y,Pb,Pr jack(component}

Power on

e To turn on the LCD TV

Press _ on the buttom of the LCD TV to _ first.

® Be sure to turn off the power and unplug both units from the wall outlet before making any connections.

4

÷ Your LCD TV can be mounted on a Desktop as shown in the figure above.
÷ This is not floor-standing unit.

÷ Please secure enough space for safe use. (Please refer to A and B.)
÷ Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV

due to increased temperature.

A

(Mounting on a wall)

÷ Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation.

÷ Do not install on an unstable location with support area smaller than the LCD TV.
÷ Please refer to the desktop stand user's manual for details of installation.

(Using the Stand)

//////i

5

t

2 inch_s

/

/

,/"

/

,/
,/"
,/

/

/
/

,/,

/
/

f.

÷ For connecting to ATSC or NTSC broadcasts

O ] Wall Jack with

F-Connector

Coaxial (Round) Antenna Cable

external ....

Analog+Digital 75 O

Antenna

Press TV/AV button on the remote control to select TV, then press OK button to confirm.

Then you can receive the ATSC/NTSC signal.

÷Functions of remote control buttons

The remote control is using Infra-Red (In). Point ittowards the front of the LCDTV. The remote control may not
work correctly if it is operated out of range or out of angle.

TV/AV

POWER

Press to turn the TV on/standb

MUTE

Press to mute the sound.

Press again or press VOL+ to

unmute.

CH+/-

Channel/Program +/-

VOL+/-

Volume +/-

Press to display the input source
menu

CC

Press to display the closed caption

MTS
Press to select the audio channels.
FAV

Press to display teh favorite
channels list.

EPG
Press to enter the EPG menu

directly.
DISPLAY

Press to enter the EPG menu
directly.

PICTURE

Press repeatedly to cycle

through the available video

picture modes.

SOUND

Press to cycle through the

different sound settings.

ASPECT

Press to cycle through the

different screen display mode.

FREEZE

Press to catch the current

picture.

NUMBER BUTTONS
To select the program directly.

e.g.:
Select channel 5,
press "5" button.

Select channel 62
press "6" button, and press "2"

button in 2 seconds.
Select channel 152

press "1" button, and press "5"
button, then press "2" button

in 2 seconds.
select channel "5-1",

press "5" then "-/--" and "1".

7

THUMBSTICK (_d T/,4/ _./OK)

Allows you to navigate the

on-screen menus and adjust the

system settings to your

preference.

MENU

Press to display the OSD menu.

Press to exit form the OSD menu.

RETURN

Press to Return to the previous

channel viewed.

TIMER
Press to setup the sleep time

among: 5min, 10min, 15min, 30min,
45min, 60min, 90min, 120min,

180min, 240min and off.

8

1. Check the polarity (+,-) of the batteries in the remote control.

2. Check that the batteries have power.

3. Check that the LCD TV is powered and that it is properly plugged in.

4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV.

1. Open the cover completely.

2. Insert the two supplied batteries (AA, 1.5V). Ensure that the polarities (+ and -) of the batteries are aligned
correctly.

3. Silde back the cover.

Step 1 Step 2 Step 3

CAUTION " Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the national code (Recycling program).

The remote control should be operated within 30feet(7m) and 30 °to the left and the right of the IR receiver
at the front of the LCD TV.

Used batteries should be disposed properly.

9

÷ Connecting to the Composite terminal

_._Connectionterminals of other equipmentsdifferby manufacturerandmodel.

Composite Cable

Connectthe LCDTV's Composite In terminal to theVCR'sComposite Out terminal using the Composite cable.
(Make sure the colorofthe terminals andthe color of the cable arethe same)

÷ Connecting to the SoVideo terminal

< VIDEO >

t

< VIDEO >

TV/AV

1. Turn on the LCD TV and press on the remote control.

2. Use to move to"AV 1 or 2", press OK button to comfirm.

• If S-Video has been connected, select "S-Video".

3. Turn on the VCR, insert the tape and press play button.

t

S-Video Cable

10

÷ Connecting to the Composite terminal

÷ Inorderto watchCableTV, Subscribetoyour localCableTVcompanyand installa separatereceiver(Set-Top-Box)
_.."Connectionterminalsofother equipmentsdifferby manufacturerand model•

Connect the LCD TV's Composite In terminal to the cable broadcasting receiver Composite Out terminal using the
Composite cable• (Make sure the color ofthe terminals and the color of cable are the same)

< Cable broadcasting receiver >

Composite Cable

÷ Connecting to SoVideo terminal

< Cable broadcasting receiver>

t

Use the S-Video cable for higher picture quality• S-VideoCable

÷ Connecting to the HDMm terminal <Cablebroadcastingreceiver>

t

TV/AV

1. Turn on the LCD TV and press on the remote control.

2. Use _ _ to move to"AV 1 or 2", press OK button to comfirm.

• If S-Video has been connected, select "S-Video".

• If HDMI has been connected, select "HDMI".

3. Turn on the cable broadcasting receiver and select the channel you wish to view.

11

÷ Connecting to the component terminaJ

•_Connection terminals of other equipments differ by manufacturer and model.

< DVD >

1. Connect LCD TV's Y, Pb,Pr terminal to DVD's Video Out terminal using the external cable.

2. Connect LCD TV'sAudio terminals(left & right)in AV 1to DVD's Audio Outterminal using the Audio cable.

3. It must match the component connection cable Y, Pb,Pr between the LCD TV and DVD Player.

÷ Connecting to the SoVideo terminal

< DVD >

÷ S-Video cable can be used ifthere isan S-Video terminal.

÷ Connecting to the HDM_ terminal <DVD>

• Connecting from HDMI terminal to HDMI terminal.

TV/AV

1. Turn on the LCD TV and press 4 on the remote control.

2. Use _ _ to move to "Component", press OK button to comfirm.

•If S-Video has been connected, select "S-Video".

•If HDMI has been connected, select "HDMI".

3. Turn on the DVD, insert the DVD disc and press Play button.

12

÷ Connection terminals of other equipments differ by manufacturer and model.

PCAudio Cable

<PC>

• Connect LCD TV's PC Input terminal to PC's RGB terminal using the D-Sub cable.

• Connect LCD TV's PC Audio terminal to PC's Audio terminal using the Audio cable.
Only for PC's with Audio terminal)

TV/AV

1. Turn on the LCD TV and press on the remote control.

2. Use to move to"VGA", press OK button to comfirm.

13

÷ Connecting to the Audio Amplifier and Monitor

÷ Connection terminals of other equipments differ by manufacturer and model.

Video Cable

Connect LCD TV's AUDIO(L/R) output terminal to Audio Amplifier using an audio patch cable.
Note: The speakers of LCD TV still have output audio signal at this time.

You can use the Volume +/- buttons to adjust the output audio signal.

<Monitor>

<Audio Amplifier>

t

o Connecting to the Digital Amplifier

_._Connection terminals of other equipments differ by manufacturer and model.

E

_.[ COAX Cable

14

<Digital Amplifier>

t

÷ Power on/off

m m

Press _ on the buttom of the LCD TV to _ first.

•To turn the LCD TV on •
Press"POWER" buttonon the LCDTV.

•To turn the LCD TV off"

Press"POWER" buttonon the LCDTV.

•To turn on/off by remote control '

POWER

Press the button of remote control.

* You can select between the TV signal and the input signal of other equipments connected to the TV.
° Use this function to switch to the input source you wish to view.

Press i button on the remote control.

Use to move to the desired input source.

Press to select.

15

1.After you turn on the TV and select the input source, you should setup the on-screen menu.

2. Press MENU button to display the on-screen menu.

3. Press 4/I_ button to select the main menu: PICTURE, AUDIO, TIMER, SETUP, LOCK, CHANNEL.

4. Press • button to enter the main menu.

PICTURE MENU: AUDIO MENU:
Allows you to make adjustments to your picture settings. Allows you to customize the sound options and effects.

(select TV source for example) (Select TV source for example)

TIME MENU: SETUP MENU:

Allows you to set up a variety of timer options. Allows you to set up a variety of setup options.

(SemectTV source) (Select TV source)

LOCK MENU: CHANNEL MENU:

Allows you to set up a variety of lock options. Allows you to search channels and set up a variety of channel options.

(Select TV source) (Select TV source)

5. Press •/A button to select the item in the main menu.

6. Press 4/1_ button to adjust or select;
Press i_ button to enter the submenu.

7. Press EXIT button to exit the menu or press MENU button to go back to the previous menu.

Note:

1. Only when you input the suitable signal, the relevant items can be activated.

2. You should acrroding to the hints on the bottom of menu.

16

The PICTURE menu includes the following options "

Picture Mode Cycles among picture display modes: Standard, Dynamic, Mild, Sports, User.

Contrast Controls the difference between the brightest and darkest regions of the picture.

Brightness Controls the overall brightness of the picture

Color Controls the color.

Tint Controls the fresh tones so they appear natural.

Sharpness Control the amount of fine detail in the picture.

Color Temp. Cycles among color modes: Normal, Coot, Warm.

17

The SOUND menu includes the following options '

Sound Mode Allows you to select among: Flat, Music, Movie, Sports and User.

Bass Controls the relative intensity of lower pitched sounds.

Treble Controls the relative intensity of higher pitched sounds

Balance To adjust the balance of the left and right sound track, or turn off the volume of the

left and right sound track.

Surround To turn on or off the Surround function.

SPDIF Type Allows you to select between PCM and RAW.

Audio Language Allows you to select audio languages among.

18

The TIMER menu includes the following options "

Sleep Timer Allows you to set up the sleep timer among: 5min, 10min, 15min, 30min, 45min,

60min, 90min, 120min, 180min, 240min and off.

Time Zone Allows you to set up the sleep timer among: Pacific, Alaska, Hawaii, Eastern, Central

and Mountain.

Daylight Saving Time Allows you to turn on or off the daylight saving time.

19

The SETUP menu includes the following options:

______________________________________________________________________________________i_iiiiiiiiiiHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH,

Menu Language Allows you to select menu language among: English, Frangais, Espadot and Deutsch.

Transparency Allows you to turn on or off the transparency function_

Zoom Mode Allows you to select the zoom mode among: 16:9, 16:9 zoom, 4:3, 4:3 zoom_

Noise Reduction Allows you to select the noise reduction mode among: Strong, Off, Weak, Middle_

PC Setup Input PC signal first, then press TV/AV button to select VGA mode,

press OK button to confirm.

H-Position

V-Position

Clock

Phase

Auto

Allow you to use • and • button to adjust the H Position.

Allow you to use _ and • button to adjust the V Position.

Allow you to prolong the image.

Allow you to adjust the definition.

Select "Auto" and press • button, the unit will automatically adjust

all items to achieve a best effect.

2O

Close Caption Use • button to highlight the Close Caption item, then press • button

to enter into the following menu_

CC Mode

Basic Selection

Advanced Selection

Option

XVS Turn on/off the function to adjust the dynamic brightness automatically_

Allows you to select the CC Mode among: On, Off and
CC on Mute.

Allows you to select the basic selection among: CC1, CC2,

CC3, CC4, Text1, Text2, Text3 and Text4_

Allows you to select the advanced selection among:

Service1, Service2, Service3, Service4, Service 5 and
Service 6_

Use • button to highlight the "Option" item, then press

• button to enter into the following menu_

Use • and • buttons to highlight the desired item,

and use • and • buttons to select.

Restore Default Restores all settings in SETUP menu to factory settings_

21

You should enter the password to enter the Lock menu.
NOTE: the factory password is 0000.

input

4-digit password

The LOCK menu includes the following options "

Change Password Use • button to select the "Change Password" item, then press I_

button to enter into the following menu.

Input the new 4digit password and input it again to confirm.

System Lock Allows you to turn on or off the system lock.

If you turn off the system lock, then the following items(US, Canada, RRT Setting

and Reset RRT) will unable to use.

22

US

Use • button to highlight the "US" item, then press • button to enter
into the following menu.

TV

MPAA

Use • button to highlight the "TV" item, then press •

button to enter into the following menu_

Use • and • buttons to select the desired rating and press

• button to block or unblock rating.

The Movie rating (MPAA) is used for original movies rated by the

Motion Picture Association of America (MPAA) as broadcasted on

cable TV and not edited for television.

Use UP or DOWN button to select N/A, G, PG, PG-13, R, NC-17

orX.

RATING DESCRIPTION

G General Audiences. Movie is appropriate for all ages.

PG Parental Guidance Suggested. May contain material not suited for

younger viewers.

PG-13 Contains content that may not be appropriate for viewers under the

age of 13.

R Restricted. Contains adult content, no one under 17 admitted without

parent.

NC-17 No one 17 and under admitted.

X Adults only.

23

Canada

Reset RRT Allows you to reset the RRT setting.

Use Down button to highlight the "Canada" item, then press RIGHT button to

enter into the following menu.

Canada English Use LEFT and RIGHT buttonsto selectamong: E, C, C8+,

G, PG, 14+ and 18+

Canada French Use LEFT and RIGHT buttonsto selectamong:E, G, 8ans+,

13ans+,16ans+ and 18ans+

24

The Channel menu could only be operated in TV source.

COLOR TV BROADCASTING SYSTEM

AZORES(PORTUGAL)

BALKANS(KOSOVO, BOSNIA)

BELGIUM/GERMANY/ITALY

IRAQ

AFGHANISTAN

NETHERLANDS/NORWAY

SAUDI ARABIA

KUWAIT/TURKEY/JORDAN

UNITED KINGDOM

CZECH/HUNGARY/POLAND

RUSSIA

U.S.A./JAPAN/KOREA/GUAM

The CHANNEL menu includes the following options "

Air/Cable Allows you to select antenna between Air and Cable.

If you selet "Cable", the following items(Favorite, Show/Hide, Channel NO.,
Channel Label and DTV Signal) are unable to use.

Auto Scan Use • button to highlight the "Auto Scan" item, then press I_ button

to enter into the following menu_

PAL B/G
PAL B/G

PAL B/G

SECAM B

PAL B
PAL B/G

SECAM B

PAL B
PAL BIG
PAL I
PAL D/K

SECAM D/K

NTSC M

If you select "Air" as input signal in Antenna item, you can press I_ button
to search the channels automatically.

The receivable channels will be stored
automatically.

When searching channels, press MENU
to stop.

NOTE: It will take a while (about 10

mimutes) to auto scan in NTSC

or ATSC mode, please wait

patiently.

25

If you select "Cable" as input signal in Antenna item, allows you to select

Cable System among: Auto, STD, IRC and HRC.

Use • button to highlight the "Start to Scan", then press • button
to search the channels automatically.
The receivable channels will be stored automatically.

When searching channels, press MENU to stop.

Favorite

Show / Hide

Allows you to add these channels which you desired as the favorite channels.

Use • or • button to highlight the "Favorite" item, then press • button
to enter into the following menu.

Use • and • button to highlight the desired item, then press OK

button to add or remove the highlighted channel as favorite.

Allows you to show or hide the channels.
Use • or • button to highlight the "Show / Hide" item, then press •

button to enter into the following menu.

Use • and • button to highlight the desired item, then press OK

button to show or hide the highlighted channel.

Channel No. Press • button to Show and select the channel.

Channel Label

DTV Signal Show the quality of digital signal: good, Normal, Bad.

Allows you to setup a label for the channel.

Press • button to select the position of the table, and press • and •

button to select the words.

26

480i _20X480

480p 720X480

I

27

• Do not use other functions that are not mentioned in this user's manual.

• In case a problem occurs with your LCD TV, please take the following steps first.

• If you still have the problem, turn the power off and contact your dealer or an authorized service center.

B i

Problem ActiOn

The screen does notappear. Isthe power plug pulledout? Insertthe power plug.

i

Press the power button of the remote control.

The screen appears too This problem occurs for a brief time in the process of
slowly after the power isturned on. image elimination processing in order to hide temporary screen noise

that occurs when the power is turned on. But if the screen does not
come after 1 minute contact your dealer or an authorized service

center.

Screen istoo bright or too dark. Perform brightness adjustment orContrast adjustment.

Screen istoo large or too small. Adjust the screen size.

Stripes appear on the screen

and it shakes.

Screen appears, Voice is not heard

Remote control does not work

Stop using wireless telephones, hair driers and electric drills.

1. Press the "MUTE"button.

2. Increase the sound level by pressing volume adjustment button.

3. Check if sound terminal of external input is connected properly.

4. Check if audio cables are connected properly.

5. Select and check the other input.
If the sound still does not work and the other channels are the
same after you have done as the above, contact your dealer or

an authorized service center.

1. Check if main power is On.

2. Check that the batteries of the remote controller were loaded

properly.

3. Check to see if any obstacle exists between the LCD TV and

the remote control, then remove it, if any.

4. Ifthe batteries have no power, replace them with two new

batteries.

o This LCD TV is for household use and registered as harmless on electromagnetic waves.

• Therefore, you can use it in every location as welt as residential areas.

28

The cabinet design and electronics specifications wilt be modified without prior notice for
improving the performance.

Weight and dimensions are approximate

29

VIORE TMLIMITED WARRANTY

FLAT PANEL TELEVISION

This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is

warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and

labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.

This Limited Warranty does not apply to store display products and product sold as a "marked down" special, in "as is" condition, "open box",
products missing accessories, no fault found or damaged at time of delivery to Viore.

Proof of purchase within one year from date of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is
within the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must be presented as a pre-condition to obtaining the limited
warranty service.

This limited warranty begins on the original date of purchase, and is valid only on Products purchased through VlORE authorized dealers and

used in the United States by the original purchaser. To receive warranty service, the purchaser must contact VlORE for problem determination

and service procedures. Warranty service may only be performed by a duly authorized VlORE service center. The original dated bill of sale,

receipt or receipted invoice must be presented upon request as proof of purchase to VlORE or VlORE's authorized service center.

VlORE will repair or if repairs cannot be made, VlORE will replace this Product at no charge if the Product is defective as specified in this

limited warranty during the limited warranty period. VlORE may use new, or remanufactured parts or products to repair or replace the Product

at its sole discretion. All replaced parts and Products become the property of VlORE and must be returned to VlORE. Replacement parts and

Products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.

Product freight needs to be prepaid by original purchaser and shipped in either its original packaging or packaging affording an equal degree

of protection. VlORE shall not be responsible for or obligated to replace damaged goods. If you reside in California and you cannot transport

the television due to the size, weight, and method of attachment, VlORE will provide transportation for the television to the repair facility. If

you reside in a state other than California, you are responsible for the costs of transporting the television to a repair facility.

If the product is received damaged by VlORE, it is the responsibility of the consumer to file a claim against the carrier. VlORE will only store

the damaged product for 30 days and reserves the right, in its sole discretion, to dispose of the damaged product or ship it back to the

consumer at consumer's expense after 30 days.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise

expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:

damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or

serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,

equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not

supplied or authorized by VlORE which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and

surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are

covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal

transmission and delivery problems; burned-in images. VIORE does not warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO

OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS

PRODUCT SHALL BE BINDING ON VIORE. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE

EXCLUSIVE REMEDY OF THE CONSUMER. VIORE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, OR CONSEQUENTIAL

DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT; EXCEPT TO THE EXTTENT PROHIBITED

BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPUSE ON THIS

PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY SHALL NOT

EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR

EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential

damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state. Any provision contained herein which is found contrary to state or local laws shall be deemed null

and void and the remaining provisions shall continue in full force and effect.

To obtain warranty service, please contact VlORE at:

Phone: [phone]

www.viore.com

Ver. 090330