46” 1080p LCD Television
LC46VF60
11
Contents
Contents
Caution
Safety Information
Unit and Accessories
Product Feature
Product Introduction
Connections
Remote Control
Basic Operation
OSD Menu
1. Video menu
2. Audio menu
3. TV menu
4. Setup menu
5. Parental menu
1
2
3
3
4
5
6-7
8
9-15
9-10
10
11
12
13-15
Simple Troubleshooting
Technical Specifications 17
INSTRUCTION FOR WALL MOUNT 18
VIORE Limited Warranty 20
16
Caution
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live in!
This unit complies with America Safety directives.
This unit complies with FCC directives.
1
Safety Information
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below
Electrical safety
• The TV set should only be connected to a mains supply which matches that stated on
the label on the mains adaptor.
• To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial
(if outdoor) and mains adaptor from the supply.
- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
.
Physical safety
• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
2
Unit and Accessories & Product Feature
Unit and Accessories
TV set
User’s Manual
Product Feature
INPUT
123
456
89
7
0 -/--
PICTURE SOUND SLEEP DISPLAY
CH+
VOL+
MUTE
CH-
VOL-
MENU
EXIT
OK
FAV
CC EPGMTS
Remote control
AC Power Cable
• Integrated ATSC TV tuner for HDTV broadcast reception
• Three HDMI input for true digital connections
• VGA port for connection to PC
3
Product Introduction
Front View
Product Introduction
Power Indicator
Remote Control window
(Keep clear)
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press Power Button to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
POWER: Turn on/standby the TV set.
0
to the left or right side and 200 above or below the remote control
4
Connections
Connections
SWITCH AC POWER IN
Service
HDMI1 HDMI2 HDMI3 VGA S-Video Y Pb Pr L IN R IN Video L IN R IN 1 PC IN RF
3 4 5 6 7 8 9 10 11 121 2
Coax Y Pb Pr L IN R IN Video L IN R IN 2
Headphone out
POWER SWITCH: Switch on or off the power supply.1).
AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable.2).
Service: USB port for service.3).
HDMI1/2/3: Connect them to the video output terminal of the external device.4).
5).
VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.
S-VIDEO: Connect it to S-video output terminal of the external device.6).
COAX: Digital coaxial output.7).
YPbPr1/2 : Connect them to the video output terminal of the external device.8).
Audio L/R in 1/2 : Connect them to audio output terminal of the external device.
VIDEO1/2: Connect it to video output terminal of the external device.9).
Audio L/R in 1/2 : Connect them to audio output terminal of the external device.
Audio L/R in 1 (Shared with S-VIDEO)
10).
PC AUDIO IN: Connect it to the audio output terminal of PC.
11).
Headphone out : Connect it to the headphone.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.12).
5
Remote Control
Remote Control
The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote
control may not work correctly if it is operated out of range or out of angle.
INPUT
123
456
789
0 -/--
PICTURE SOUND SLEEP DISPLAY
VOL+
VOL-
EXIT
MUTE
MENU
OK
CC EPGMTS
FAV
CH+
CH-
POWER(red button): Turn the TV on/standby.
INPUT: Press to display the input source menu.
Number Buttons: Choose channel directly.
Select channel 5, Press button "5";
Select channel 62, Press button "6", then press button "2" in 2
seconds;
Select channel 151, Press button "1", and press button "5" in 2
seconds, and press button "1" in 2 seconds;
Select channel 5-1, Press button "5", and press button "- / - -"
in 2 seconds, and press button "1" in 2 seconds;
(RETURN): Return to the previous channel viewed.
PICTURE: Press repeatedly to cycle through the available
video picture modes.
SOUND: Press to cycle through the different sound settings.
SLEEP : Shutdown timer.
DISPLAY: Display the information of current mode.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
MUTE: Press to mute the sound, press again or press VOL+ to
unmute.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
Thumbstick(
): Allows you to navigate the on-screen
menus and adjust the system settings to your preference.
OK: CONFIRM button.
CC: Press to display the closed caption.
MTS: Press to select the audio channels.
EPG: Press to enter the EPG menu directly.
FAV: Press to display favorite channel list.
6
Remote Control
Remote Control
Installing Batteries
1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix different types or used batteries with new ones.
3. Close the cover.
- The remote control should be operated within 30 feet(7m) and 30
IR receive at the front of the LCD TV.
- Used batteries should be disposed properly.
0
to the left and right of the
7
Basic Operation
Power on/off
1. Connect to the power supply with the power code.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display input
source menu, and use CH+/- button on the TV set or Ĥ0ĥ!button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Basic Operation
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Main menu
Video
Audio
TV
Setup
Parental
Submenu
(Video menu
for example)
Hint---you should operate the OSD menu according to the hint.
Use /
In the submenu, use Ĥ/
or press OK button to enter the submenu.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
button to select the main menu, and press button to enter the submenu.
ĥ
Ĥĥ
button to select the function item, press button to adjust/setup,
8
ĥ
/
Ĥ
ĥ
OSD Menu
OSD Menu
1. Video menu
Description
Note: The item Color, Sharpness and DNR will not display in VGA mode; The item Tint will
display only in NTSC mode; The item VGA will display only in VGA mode.
Picture Mode: Select your desired picture mode.
You may select the picture mode directly by pressing the PICTURE button on the remote
control.
Brightness: Adjust image black level.
Contrast: Adjust image contrast.
Color: Adjust image color.(Invalid in VGA mode)
Sharpness: Adjust the sharpness.(Invalid in VGA mode)
Note: You could operate the Brightness, Contrast, Color and Sharpness items only
when you select User as picture mode.
Tint: Adjust the tint of the picture (in NTSC mode).
Color Temperature
Color Temperature: Select an optimum color temperature mode to suit your eyes for
viewing among User, Cool, Middle, Warm.
When you select User mode, you could set the R(red), G(Green), B(Blue) Gain.
VGA (in VGA mode)
9
OSD Menu
OSD Menu
Auto adjust: Setup the parameter of the screen automatically.
H/V Position: Adjust the transverse/vertical position of the screen.
Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a
stable image is obtained.
Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.
DNR: If the broadcast signal received is weak, you can select the DNR option to reduce
the video noise level between Off, Low, Mid and High.(Invalid in VGA mode)
Power Saving: Turn on/off the Power Saving mode, when the function is on, the machine is in
energy-saving status.
2. Audio menu
Description
Balance: Adjust the audio output between left and right speakers.
Bass: Adjust the level of the lower-pitched sounds.
Treble: Adjust the level of the higherpitched sounds.
Sound Mode: Select your desired picture mode.
You may select the sound mode directly by pressing the SOUND button on the remote
control.
Sound Surround:Turn on/off on the surround function.
SPDIF: Select the mode of the digital audio output such as PCM and Dolby digital or off.
Auto Volume Control:Turn on the Auto Volume Control function, and the TV will auto control
the volume when you change the programs.
10
OSD Menu
OSD Menu
3. TV menu (in TV mode)
Description
Tuner Mode: Select Cable or Air as the tune mode.
Channel Scan: Press to start channel auto scan, This process will find all available Analog
and Digital channels and store them.
Note: When the TV is auto tunning, you could press MENU button to stop auto tunning
and return to preview menu.
Channel Skip
ĥ
Use / button to select the channel you want to skip, and press OK button to sign
Ĥĥ
on th right, and the channel will be skipped when you view the channels by CH+/- button.
Press OK button again to cancel.
11
OSD Menu
4. Setup menu
OSD Menu
Description
OSD Language:
OSD Transparency: Change the OSD transparency.
Time Setup
Time zone: Select the time zone.
Time: Setup time for the TV in the Time menu.
Sleep Timer: Setup the sleep timer(Auto shut down the TV).
Time Display Mode:
Caption
Select OSD language.
Change the time display mode.
Analog Closed Caption: Setup the Closed Caption for analog channels.
Digital Closed Caption: Setup the Closed Caption for digital channels.
Digital Caption Style: Setup the digital caption style.
Reset Default: Press OK button to restore factory default.
12
OSD Menu
OSD Menu
5. Parental menu
Description
Note: you shoud enter the passward (default passward:0000) to enter the the Parental
menu
Program Block
Rating Enable: Turn on/off the Progam Block function.
U.S. TV Ratings:
Ĥĥ
Use
to sign (blocked).
/ /
button to select, and press OK button
/
ĥ
Ĥ
U.S. Movie Ratings:
Ĥĥ
Use
to sign (blocked).
button to select, and press OK button
/
13
OSD Menu
Canadian English Ratings:
Ĥĥ
Use
to sign (blocked).
Canadian French Ratings:
Ĥĥ
Use
to sign (blocked).
button to select, and press OK button
/
button to select, and press OK button
/
OSD Menu
Open V-Chip:
Ĥĥ
Use
Change Password: Change the password in the submenu for parental control.
Clear All: Press OK button to clear all settings.
button to select, and press OK button to set the open V-Chip setinggs
/
14
OSD Menu
OSD Menu
15
Simple Troubleshooting
Simple Troubleshooting
If the display fails or performance dramatically deteriorates check the Display in accordance
with the following instructions.Remember to check the peripherals topinpiont the source of the
failure.
If the display still fails to perform as expected,connect your helpline for assistance.
No power
- Check all connections to the TV.
- Press either the power button or the Standby button on the Remote control.
No picture or sound
- Ensure that the TV is plugged in and the power is on.
- Ensure that the aerial is connected.
- Try a different programme.
Poor picture quality
- Check the aerial connections.
- Check that the channel is tuned in properly.
- Adjust the picture settings:brightness,colour,sharpness,contrast,hue.
- Make sure that the TV is not located close to electrical appliances that may emit radio
frequency interference.
No colour
- Adjust the colour setting.
- Check that the programme is broadcast in colour.
- Check that the cannel is tuned properly.
TV does not respond to remote control
- Check that there are no obstructions between the remote control and the unit.
- Check that the remote control is within range of the unit.
- Check that the batteries in the remote control and not weak or exhausted.
This LCD TV is for household use and registered as harmless on electromagnetic waves.
Therefor,you can use it in every location as well as residential areas.
16
Technical Specifications
Technical Specifications
46
Dynamic Contrast Ratio
S-VIDEO
500cd/m
10000:1
ȍ
8W x 2
1920x1080
2
1
2
4
2
3
1HEADPHONE
280W
* Product specifications and appearance are subject to change without notice.
17
INSTRUCTION FOR WALL MOUNT
INSTRUCTION FOR WALL MOUNT
The wall mount kit (not included) with your purchase allows you to mount your
VIORE TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. VIORE is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
VESA Dimensions for Wall Mount
600mm
400mm
- This VIORE TV is compliant with the VESA Standard mounting hole pattern
600mm x 400mm.
- 4 pcs of type M5 screws are required for installing the wall mount bracket to
your VIORE TV. Do not use screws that are longer than 10 mm. Screws that
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. VIORE is not liable for these kinds of
incidents
- Do not mount your VIORE TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
18
20
VIORE, Inc. 7801 Hayvenhurst Avenue, Van Nuys, California 91406 Printed in China
Loading...