is intended to alert the user to the presence of un-insulated "dangerous
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live
in!
This unit complies with America Safety directives.
HDMI is a trademark of HDMI Licensing LLC in the United States and other countries.
4
Introduction
1. Front View
Introduction
INPUT MENU CH+CH-VOL+ VOL-POWER
Remote Control window
(Keep clear)
Led Indicator
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
The effective receiving range for the signal is 5-8 metres from the front of the remote
0
control window, and 30
to the left or right side and 200 above or below the remote control
window.
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
POWER: Turn on/standby the TV set.
Press INPUT button on the TV set or the SOURCE button
on the remote control to
and use
CH+/- button on
remote control to select the
on the remote control to
display the input source menu,
the TV set or
/ button on
input source, press OK button
enter.
Note: Before you select the input source, make sure the
connections are prepared.
5
2. Rear View
Introduction
Pr Pb R-IN L-IN
Master Power Switch:
AC POWER IN:
Connect to an earth 100-240V~ 50/60Hz outlet by using the supplied
Switch on or off the power supply.
power cable..
RJ45
: Connect to the network.
USB
: For service, Multimedia and Wireless network.
HDMI1/2/3
: Connect it to the HDMI output of the external device.
COAX : Digital Audio Output.
YPbPr: Connect them to the video output terminal of the external device.
L/R in
: Connect them to audio output terminal of the external device. (YPbPr)
VIDEO: Connect it to video output terminal of the external device.
L/R in
: Connect them to audio output terminal of the external device. (Video)
HDMI3 VGA PC audio CoaxY VIDEO R-IN L-IN RF Headphone
RF
: Connect antenna or cable 75 Ohm coaxial to receiv
Headphone
: Connect it to your headphone or other audio equipments.
e TV signal.
Note: If TV network system has problem, you can use Master Power Switch to reset.
6
Introduction
3. Instruction for Wall Mount
The wall mount kit (not included) with your purchase allows you to mount your
VIORE TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. VIORE is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
Dimensions for Mounting Hole Pattern
300mm
430mm
-
This VIORE TV is compatible with a 300mm x 430mm mounting hole pattern.
- 4 pcs of type M5 screws are required for installing the wall mount bracket to
your VIORE TV. Do not use screws that are longer than 12 mm. Screws that
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. VIORE is not liable for these kinds of
incidents
- Do not mount your VIORE TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
7
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.