VIORE LC32VF62 User Manual

32" 1080p LCD Television

LC32VF62

16

Ver. 110420-1

Contents

Contents

Caution
Safety Information

Unit and Accessories
Product Feature

Introduction

1. Front View

2. Rear View

3. Instruction for Wall Mount 7

4. Remote Control

Basic Operation

OSD Menu

1. Picture menu

2. Audio menu

3. Time menu

4. Setup menu

5. Lock menu

6. Channel menu

2
3

4
4

5-9

5
6

8-9

10

11-17

11
12
13
14
15
16-17

Simple Troubleshooting

VIORE

18

19

02ytnarraWdetimiL

1

Caution

Caution

is intended to alert the user to the presence of un-insulated "dangerous

to constitute a risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end­of-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live
in!

This unit complies with America Safety directives.

This unit complies with FCC directives.

2

Safety Information

Electrical safety

Safety Information

Physical safety

3

Unit and Accessories

Unit and Accessories and Product Feature

TV set

Stand Installation Guide

User's manual

Quick Start Guide

INPUT

123

456

789

0 -/--

PICTURE SOUND SLEEP DISPLAY

EXIT

MTS

CC EPG

CH+

MUTE

CH-

MENU

OK

FAV

VOL+

VOL-

Remote control
Batteries: 2xAAA

Power Cord

Product Feature

32

Three HDMI inputs for true digital connections

HDMI is a trademark of HDMI Licensing LLC in the United States and other countries.

®

4

ce

Introduction

1. Front View

Introduction

Power Indicator

Remote Control window
(Keep clear)

1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.

Indicator on(Red) Standby mode
Indicator on(Green) Power on mode

The effective receiving range for the signal is 5-8 metres from the front of the remote

0

control window, and 30

to the left or right side and 200 above or below the remote control

window.

2). The functions of the buttons:

INPUT: Press to display the input source menu.

MENU: Press to display the OSD menu,

press again to exit the menu.

CH+/-: Press to scan through channels.

VOL+/-: Press to adjust the volume.

TV

AV

Component

HDMI1
HDMI2

HDMI3

VGA

POWER: Turn on/standby the TV set.

Press INPUT button on the TV set or remote control to
display the input source menu, and use CH+/- button on
the TV set or

/ button on remote control to select the

input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.

5

2. Rear View

1 2

Introduction

Service

HDMI1

3 4

1).

POWER SWITCH: Switch on or off the power supply.

2).

AC POWER IN:

3). Service
HDMI1/2/3

4).

: For service use only.

Connect to an earth 100-240V~ 50/60Hz outlet with the supplied power cable.

: Connect it to the HDMI output of video device.

HDMI3

5).

6).

7).

VIDEO : Connect it to video output video device.
L/R in

8).

YPbPr
L/R in

9).

L/R Audio out:
COAX : Digital audio output.

10).

11).

RF

12). Headphone

: Connect them to audio output

: Connect them to the video output

: Connect them to the audio output

Connect them to the

: Connect antenna or cable 75 Ohm coaxial to receive TV signal.

: Connect it to your headphone or audio equipments.

video device.

audio device.

IN

5

6 7

video device.

video device.

Y Pb Pr L IN R IN

VIDEO L IN R IN L R

Audio out

8

9

COAX

10

11

12

6

Introduction

3. Instruction for Wall Mount

A wall mount kit (purchased separately) would allow you to mount your VIORE
TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. VIORE is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.

Dimensions for Mounting Hole Pattern

300mm

200mm

- This VIORE TV is compatible with a 300mm x 200mm mounting hole pattern.

- 4 pcs of type M5 screws are required for installing the wall mount bracket to
your VIORE TV. Do not use screws that are longer than 10 mm. Screws that
are too long may cause damage to the inside of the TV set.

- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. VIORE is not liable for these kinds of
incidents

- Do not mount your VIORE TV at more than a 15 degree tilt.

- Always use two people to mount the TV to a wall.

- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.

7

Introduction

4. Remote Control

The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote
control may not work correctly if it is operated out of range or out of angle.

INPUT

123

456

789

0 -/--

PICTURE SOUND SLEEP DISPLAY

VOL+

VOL-

EXIT

MUTE

MENU

OK

CC EPGMTS

FAV

CH+

CH-

POWER(red button): Turn the TV on/standby.

INPUT: Press to display the input source menu.

Number Buttons: Choose channel directly.

Select channel 5, Press button "5";
Select channel 62, Press button "6", then press button "2" in 2
seconds;
Select channel 151, Press button "1", and press button "5" in 2
seconds, and press button "1" in 2 seconds;
Select channel 5-1, Press button "5", and press button "- / - -"
in 2 seconds, and press button "1" in 2 seconds;

(RETURN): Return to the previous channel viewed.

PICTURE: Press repeatedly to cycle through the available

video picture modes.

SOUND: Press to cycle through the different sound settings.
SLEEP : Shutdown timer.

DISPLAY: Display the information of current mode.

VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
MUTE: Press to mute the sound, press again or press VOL+ to

unmute.

MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.

Thumbstick(

): Allows you to navigate the on-screen

menus and adjust the system settings to your preference.

OK: CONFIRM button.

CC: Press to display the closed caption.
MTS: Press to select the audio channels.
EPG: Press to enter the EPG menu directly.
FAV: Press to add or remove favorite channel.

5&9

8

Introduction

Installing Batteries

1. Open the battery compartment cover on the back of the remote control.

2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix different types or used batteries with new ones.

3. Close the cover.

- The remote control should be operated within 30 feet(7m) and 30

IR receive at the front of the LCD TV.

- Used batteries should be disposed properly.

0

to the left and right of the

9

Basic Operation

Power on/off

1. Connect to the power supply with the power cord and turn on the switch.

2. -To turn on the TV
Press POWER button on the TV or remote control.

-To turn off the TV
Press POWER button on the TV or remote control.

Input Source select

Press INPUT button on the TV set or remote control to display input
source menu, and use CH+/- button on the TV set or Ĥ0ĥ!button
on remote control to select the input source, press OK button on the
remote control to enter.

Note: Before you select the input source, make sure the
connections are prepared.

Basic OSD Menu operation

Press MENU button to display the OSD menu as below:

TV

AV

Component

HDMI1
HDMI2

HDMI3

VGA

Main menu

Picture
Audio
Time
Setup
Lock
Channel

Hint---you should operate the OSD menu according to the hint.

Use /
In the submenu, use /
or press button to enter the submenu.

button to select the main menu, and press button to enter the submenu.

ĥ

Ĥ

Ĥĥ

button to select the function item, press button to adjust/setup,

ĥ

* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)

ĥ

/

Ĥ

Submenu

(Setup menu
for example)

ĥ

Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.

10

OSD Menu

1. Picture menu

Description

OSD Menu

Picture mode: Select between Standard, Dynamic, Mild, SportsˈUser and Power Saving.

You may select the picture mode directly by pressing the PICTURE button on the remote

control.

Note: when select the "Power Saving", the machine is in energy-saving status.

Contrast: Control the difference between the bright and dark regions of the screen picture.

Brightness: Adjust brightness of the picture.

Color: Adjust color of the picture.

Tint: Control the fresh tones to make them appear natural.

Sharpness: Set the amount of fine detail in the picture.

Color Temp.: Select between Normal, Cool and Warm.

11

OSD Menu

2. Audio menu

Picture Audio

OSD Menu

12

6

Time Channel

Setup

Lock

MoveSelect

Flat

Off

PCM

English

MENU

50

50

50

Exit

Sound Mode

Bass

Treble

Balance

Surround

SPDIF Type

Audio Language

Description

Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User

You may select the sound mode directly by pressing the SOUND button on the remote control.

Bass: Low frequency intensity.

Treble: High frequency intensity.

Balance: Left and right stereo audio channels balance.

Surround: Activate or deactivate the Surround function.

SPDIF Type: Allows you to select between PCM and RAW.

Audio Language: Select audio language.

12

OSD Menu

3. Time menu

Description

OSD Menu

Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or

deactivate this function.

Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain.

Daylight Saving Time(Could only be activated in DTV mode): Select between On and Off.

Clock: User can not change time manually during DTV mode, for time is from signal source

directly.

13

OSD Menu

4. Setup menu

Description

OSD Menu

Menu Language: Select OSD menu language.

Transparency: Turn on or off the transparency menu function.

Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom.

Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.

PC SETUP: If the video input signal comes from your

PC, you may adjust the V-Position, H-Position, Clock,

Phase or even perform an Auto adjustment.

Closed Caption:

CC Mode: Allow you to select the CC Mode among: On, Off and CC on Mute.

Basic Selection: Allow you to select the basic selection among: CC1, CC2, CC3, CC4,

Text1, Text2, Text3 and Text4.

Advanced Selection: Allow you to select the advanced selection among: Service1, Service2,

Service3 Service4, Service 5 and Service 6.

Option: Use thumbstick buttons to operating in option menu as your desire.

XVS: Activate/deactivate the automatic dynamic brightness function.

Restore Default: Restore all settings in SETUP menu to factory settings.

14

OSD Menu

OSD Menu

5. Lock menu

You must enter the password to gain access to the Lock menu. The default password is 0000.
You may modify the following options:

Description

Change password: Change the password, you must enter the new password twice to confirm it.

Note: Do not forget the password.

System Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below
don’t work.
This option menu allows you to lock any TV channel or adjust the Movie rating filter.

US:

TV: Use buttons to select the desired rating

and press button to block or unblock rating.

Ĥ0ĥ

ĥ

MPAA: The Movie rating (MPAA) is used for original
movies rated by the Motion Picture Association of
America (MPAA) as broadcasted on cable TV and not
edited for television.
Use button to select N/A, G, PG, PG-13, R,

Ĥ0ĥ

NC-17 or X.

G: General Audiences. Movie is appropriate for all ages.
PG: Parental Guideance Suggested. May contain material not

suited for younger viewers.

PG-13: Contains content that may not be appropriate for viewers

Canada:

under the age of 13.
R: Restricted. Contains adult content, no one under 17 admitted
without parent.

NC-17: No one 17 and under admintted.
X: Adults only.

Canada English: Select among: E, C, C8+, G, PG,

14+ and 18+.

Canada French: Select among: E, G, 8ans+, 13ans+,

16ans+ and 18ans+.

Reset RRT: Allow you to reset the RRT setting.

15

OSD Menu

6. Channel menu

OSD Menu

Description

Air/Cable: Allow you to select antenna between Air and Cable.
If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and
DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.

µ

If you select “Cable” as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.

ĥ

Use button to highlight the “Start to Scan”, then press
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.

µ

If you select “Air” as input signal in Antenna item, you
can press button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC or ATSC
mode, please wait patiently.

ĥ

ĥ

Favorite: Allow you to add these channels which you desired
as the favorite channels.

Use / button to highlight the desired item, then press
OK button to add or remove the highlighted channel as
favorite.

ĥ

ĥ

16

OSD Menu

OSD Menu

Show/Hide: Allow you to show or hide the channels.

Use / button to highlight the desired item, then press

OK button to show or hide the highlighted channel.

Channel No.: Show and select the channel.

ĥ

ĥ

Channel Label: Allow you to setup a label for the channel.
Press / button to select the position of the table, and press / button to select the
words.

DTV Signal: Show the quality of digital signal: good, Normal, Bad.

ĥ

ĥ

ĥ

ĥ

17

Simple Troubleshooting

Simple Troubleshooting

If the display fails or performance dramatically deteriorates check the Display in accordance
with the following instructions.Remember to check the peripherals topinpiont the source of the
failure.
If the display still fails to perform as expected,connect your helpline for assistance.

No power

- Check all connections to the TV.

- Press either the power button or the Standby button on the Remote control.

No picture or sound

- Ensure that the TV is plugged in and the power is on.

- Ensure that the aerial is connected.

- Try a different programme.

Poor picture quality

- Check the aerial connections.

- Check that the channel is tuned in properly.

- Adjust the picture settings:brightness,colour,sharpness,contrast,hue.

- Make sure that the TV is not located close to electrical appliances that may emit radio
frequency interference.

No colour

- Adjust the colour setting.

- Check that the programme is broadcast in colour.

- Check that the cannel is tuned properly.

TV does not respond to remote control

- Check that there are no obstructions between the remote control and the unit.

- Check that the remote control is within range of the unit.

- Check that the batteries in the remote control and not weak or exhausted.

This LCD TV is for household use and registered as harmless on electromagnetic waves.
Therefor,you can use it in every location as well as residential areas.

18

LCD Panel

Panel Size

32 inch (diagonal)

Input Connector

Output Connector

Brightness

Contrast

Resolution

Video

Audio(L/R)

VGA

PC Audio

HDMI

YPbPr

RF

Audio out

Headphone

300 cd/m

2

3000:1

1920x1080

1

2

1

1

3

1

1

1

1

COAX

Power Source

Maximum Power Consumption

1

100-240V~ 50/60Hz

180W

* Product specifications and appearance are subject to change without notice.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

19

VIORETM LIMITED WARRANTY

FLAT PANEL TELEVISION

This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is
warranted by VIORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and
labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.

This Limited Warranty does not apply to store display products and product sold as a “marked down” special, in “as is” conditi on, “close outs”,
“liquidation and clearance sales”, "open box", products missing accessories, no fault found or damaged at time of delivery to Viore.

Proof of purchase within one year from date of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is
within the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must be presented as a pre-condition to obtaining the limited
warranty service.

This limited warranty begins on the original date of purchase, and is valid only on Products purchased through VIORE authorized dealers and
used in the United States, Canada, and Puerto Rico by the original purchaser. To receive warranty service, the purchaser must c ontact VIORE
for problem determination and service procedures. Warranty service may only be performed by a duly authorized VIORE service center. The
original dated bill of sale, receipt or receipted invoice must be presented upon request as proof of purchase to VIORE or VIORE's authorized
service center.

VIORE will repair or if repairs cannot be made, VIORE will replace this Product at no charge with the same, like or similar Product if the
Product is defective as specified in this limited warranty during the limited warranty period. VIORE may use new or remanufactured parts or
products to repair or replace the Product at its sole discretion. All replaced parts and Products become the property of VIORE and must be
returned to VIORE. Replacement parts and Products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.

Product freight needs to be prepaid by original purchaser and shipped in either its original packaging or packaging affording a n equal degree
of protection. VIORE shall not be responsible for or obligated to replace damaged goods.

If the product is received damaged by VIORE, it is the responsibility of the consumer to file a claim against the carrier. VIORE will only store
the damaged product for 30 days and reserves the right, in its sole discretion, to dispose of the damaged product or ship it ba ck to the
consumer at consumer’s expense after 30 days.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
Damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; alte red product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not
supplied or authorized by VIORE which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and
surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are
covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal
transmission and delivery problems; burned-in images. VIORE does not warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS
STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS PRODUCT SHALL BE BINDING ON VIORE. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VIORE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT; EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED FOR THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES
YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or con sequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you ma
other rights which vary from state to state. Any provision contained herein which is found contrary to state or local laws shall be deemed null
and void and the remaining provisions shall continue in full force and effect.

To obtain warranty service, please contact VIORE at:

y also have

Phone: [phone] (USA / Puerto Rico)

1-877-777-1429 (Canada)

www.viore.com

Ver. 101122-1 Printed in China

20

VIORE, Inc. 7801 Hayvenhurst Avenue, Van Nuys, California 91406 Printed in China