VIORE LC24VXF60PB User Manual

24" 1080p LCD Television

LC24VXF60PB

Contents

Safety and warnings...................................................................................... 2-4

Introduction................................................................................... ..............5

Installation.................................................................................................. 6-9

Remote Control............................................................................ ..............10

Operation.....................................................................................................11-14

Trouble Shooting.......................................................................................... 15

IMPORTANT SAFETY INSTRUCTION

1.Read these safety instructions.

2.Keep these safety instructions.

3.Heed all warnings.

4.Follow all safety instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in

accordance with the manufacturers instructions.

8.Do not install near any heat sources such as radiators ,

stoves, or other apparatus (including amplifiers)that

produce heat.

9.Protect the power cord from being walked on or

pinched particularly at power outlets, and the point

where they exit from the apparatus.

10.Only use attachments/accessories specified by the

manufacturer.

11.Unplug this apparatus during lightning storms or

when unused for long periods of time.

12.Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord

or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture , does not operate normally,

or has been dropped.

13.Apparatus must not be exposed to dripping or

splashing and no objects filled with liquids, such as

vases, should be placed on the apparatus.

SAFETY AND WARNINGS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING:

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

CAUTION

-2-

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

SAFETY AND WARNINGS

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls.

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.

Do not trap the power supply cord under the television receiver.

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

-3-

Dim:515*320mm(

SAFETY AND WARNINGS

Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference.

INSTALLATION

Locate the TV in the room where light does not strike the screen .

directly Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation. Avoid extremely warm locations to prevent possible damage to the cabinet or premature component failure. This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other power supply. Do not cover the ventilation openings when using the TV.

CAUTION

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel.

Earthing connection--- The apparatus shall be connected to MAINS socket outlet with a protective earthing connection MAINS plug or appliance coupler of the apparatus is used as disconnect device, it should remains readily operable

Warning: Change or modifications to this unit not expressly by the part responsible for compliance could void the user 's authority to operate the Equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .

-Consult the dealer or an experienced radio TV technician for help.

Shield cables must be used with this unit to ensure compliance with the Class B FCC limits.

This symbol indicates that this productincorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or cords.

-4-

Main features

1920 x 1080 native resolution for Full-HD (1080p) performance Integrated ATSC TV tuner for HDTV broadcast reception High brightness provides a vivid and brilliant picture Deeper blacks and brighter whites with high contrast Wide Screen aspect ratio (16:9) for a complete home theater experience HDMI input for true digital connection VGA port for connection to PC Built-in stereo speaker system Full-function Remote Control

Main parameter

INTRODUCTION

Accessories

AC Power Cord.........................

Infrared Remote Control...........

User s M anual ........................

Battery(AAA).......................... 2

1

Viewing Picture Size(diagonal)

Resolution:

Aspect Ratio:

TV System:

Video Signal System:

Receiving Channel:

Power consumption:

Input Power Voltage:

Audio Output Power(THD 7%): 2x3W

Rear High-Definition Multimedia Interface(HDMI) Input x 1

YCb(Pb)Cr(Pr) Input

Rear Composte Video Input x 1

Analog RGB(VGA) Input x 1

Rear Audio Input x 2

Horizontal definition(TV line)

23.6 inch

1920x1080

16:9

ATSC Digital system and NTSC Analog system

NTSC/PAL/SECAM

Cable :1-135/ Air: 2-69(ATV&DTV)

60W

AC 100V-240V 50/60Hz

x 1

Composite Video Input >=350

Video Input >=400

YCb(Pb)Cr(Pr) >=400

-5-

INSTALLATION

Front panel

30 30

1 2 3

4 5 6

7 8 9 0

+

CH

VOL

_+_

1: Remote control sensor.

2: Indicator LED: GREEN POWER ON.

RED STANDBY.

3: Key board

REAR AV Connection

KEYBOARD

SOURCE

MENU

3

1

2

1 SOURCE Display the input source menu. 2 MENU Display main MENU. 3 CH+/CH-

In TV mode press CH+ or CH- to change the channel up and down. In MENU mode, press CH+ or CH- to select items . In standby mode, press CH+ or CH- to turn on the TV.

4 VOL+/VOL-

Adjust sound level. In MENU mode, press VOL+ or VOL- to adjust the item that you selected.

5. STANDBY Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

CH+

CH-

VOL+

VOL-

STANDBY

×ó

ÓÒ

1.AC Power Socket

2.HDMI Input

3.VGA Port (PC Input)

4.Component Video (YPbPr) Input

5.Composite Video Input

6.Audio Input

7.PC Audio Input

8.Antenna Socket

Note: 1.Composite video input and component video input share the audio input.

2.When "DVI to HDMI cable" is used, the audio output for DVI needs to be connected to the PC Audio Input (above 7).

-6-

PC

STEPS:

Be sure both the TV and computer are set to Power off.

1.Connect VGA and audio cable.

2.Connect the power cord.

3.Power on the TV, switch to VGA mode.

4.Power on the VGA. This sequence is very important.

×ó

ÓÒ

PRESET MODE

RESOLUTION

1

2

3

4

5

6

7

8

9

10

720*400

640*480

800*600

1024*768

1280*1024

INSTALLATION

V.Freq.(Hz) H.Freq.(KHz)

70

60

75

60

75

60

70

75

60

75

31.47

37.50

37.88

46.88

48.36

56.48

60.02

63.98

80.00

-7-

ANTENNA

INSTALLATION

Note: Aerial connections:IEC(female). Input impendance:75 unbalanced.

-8-

INSTALLATION

AV EQUIPMENT

This TV provides one group of AV ,one group of YPbPr for convenient connectionto VCR,DVD or other video equipment. Please refer to the owner s manual of the equipment to be connected as well.

You can use the input terminals on TV set rear as follows.

VIDEO EQUIPMENT with YPbPr

G

R

B

Y

Yellow (video)

W

White(audio L)

R

Red(audio R or Pr)

B

Blue(Pb)

G

Green(Y)

HDMI

W

R

G

R

B

W

×ó

ÓÒ

W R

R

VIDEO EQUIPMENT

W R

To audio outputs

TO VIDEO output

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game

or stereo system, etc.....

YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080p,

-9-

ENTER

S.M

P.M

EPG

3

6

9 0

AV

MTS/SAP

MUTE

RECALL

SOURCE

TV DISPLAY

CH

ASPECT

HDMI

11

12

13

14

15

+

_

16

17

18

21

22

23

28

29

30

1

POWER

1

2

3

4

7 8

MENU

2

5

4

5

6

7

EXIT

+

VOL

_

PAGE UP PAGE DOWN

8

9

10

19

20

24

25

26

27

SLEEP P.G

CH LIST FAVEPG

DTV

TV

STRENGTH

CC

YPbPr VGA

Insert Batteries Into the Remote Control

1 2

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.

3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.

Remark:

1) Alkaline Battery Recommended.

2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.

3

REMOTE CONTROL

1: POWER To set the TV standby or on.

2: NUMBER KEY For direct access to program. 3: MENU To display TV menu or to return to the previous menu. 4: CURSOR To move within the menu. 5: EXIT Used to exit menu. 6: VOL+/ To adjust sound level. 7: P.M To switch picture mode. 8: PAGE DOWN/PAGE UP

In EPG mode, use this key to page up/down the EPG information.

9: SLEEP Set time to turn off the TV. 10: P.G Setting the Parental Control level control. 11: MUTE To disable or enable the sound. 12: RECALL To access the previously viewed program. 13: SOURCE To display or exit TV input source menu. 14: ENTER Confirms selection. 15: TV DISPLAY Displays/removes the program Information 16: S.M To switch sound mode. 17: CH+/CH To access the next or previous Program. 18: ASPECT To change picture aspect . 19: CH LIST Used to display the channel list. 20: EPG

Display all the information of DTV programs. 21: FAV Used to access your favourite channels in digital TV mode. 22: HDMI Hot key directly go to HDMI source. 23: AV Hot key directly go to AV source. 24: DTV STRENGTH Used to display the DTV signal strength menu. 25: TV Hot key directly go to TV source. 26: YPbPr Hot key directly go to YPbPr source. 27: CC

Enable or disable the CC function.

28: VGA Hot key directly go to VGA source.

29: MTS/SAP

Switch the sound stereo, SAP and mono.

30: COLOR KEYS Reserved keys

-10--10-

OPERATION

1. PICTURE MENU

The first item of the MENU is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc. Press to select, press to adjust, press MENU to exit.

Timer Setup

Audio

Picture

Picture mode

Contrast

Brightness

Color

Tint

Sharpness

Color Temp.

Select Adjust

Note: If you want to adjust contrast, brightness, color, and sharpness , the picture mode must return to personal status.

Standard

Normal

V-CHIP

Menu Exit

Channel

50

0

50

2.AUDIO menu

The second item of the MENU is AUDIO MENU. You can adjust sound here. Press to select, press to adjust, press MENU to exit.

Picture

Audio

Timer Setup Channel

Sound mode Bass Treble Balance Surround AVC

Audio language

Select Adjust

Note: The item of Audio language is available in ATSC program.

V-CHIP

Standard

Off Off

English

Menu Exit

50 50 50

3.TIMER MENU

The third item of the MENU is TIMER MENU. You can adjust time here. Press to select, press to adjust, press MENU to exit.

Picture

Audio

Sleep timer

Time zone

Daylight Saving Time

Clock

Select Adjust

1).SLEEP TIMER: adjust this item , you can set the sleep timer . Note: The item of Time zone, the item of Daylight Saving Time and the item of clock are available in ATSC program

Timer

Setup

1999/12/31 04:03PM

V-CHIP

Off

Pacific

Off

Menu Exit

Channel

4. SETUP MENU

The forth item of the MENU is SETUP MENU. You can setup system here. Press to select, press to adjust, press MENU to exit.

Picture

Audio

Menu language

Transparency

Aspect

Noise Reduction

Advanced

Closed caption

XVS

Restore Default

Select Adjust

Timer

Setup

V-CHIP

English

On

16:9

Weak

Off

Menu Exit

Channel

Note: Restore Default: Reset all the settings to default value.

-11-

OPERATION

1). Advanced: In PC Mode is available.

Press button to select Advanced ,Press button, the screen will display as follow:

Picture

Audio

H-pos

V-pos

Clock

Phase

Auto

Select Adjust

(1).H-Pos:Adjust the horizontal position of the screen. (2).V-Pos:Adjust the vertical position of the screen. (3).Clock: Fine tune the screen width. (4).Phase: Fine tune the phase of the screen. Usually don`t adjust this item. (5).Auto: Auto adjust to fit the screen.

Timer

Setup

V-CHIP

Menu Exit

Channel

50

2). Closed Caption: switch close caption mode.

Press button to select Closed Caption ,Press button, the screen will display as follow:

Audio

Picture

CC Mode

Basic Selection

Advanced Selection

Option

Select Adjust

Timer

Setup

V-CHIP

Off

CC4

Service 3

Menu Exit

Channel

5. V-CHIP MENU

The fifth item of the MENU is V-CHIP MENU. You can setup here. Press to select, press to adjust, press MENU to exit.

Parent control: input the password, it will go into

Parental Control

is 6666.

5.1 .Input the correct password ,the screen will display as follow:

1). Change Password: Press button, the screen will display as follow:

Parental Control

Audio

Picture

Enter password

Select Adjust

Picture

Audio

Change password

P.G switch

US

Canada

RRT setting

Reset RRT

Select Adjust

menu. Factory default password

Timer

Setup

V-CHIP

Channel

----

Menu Exit

Timer

Setup

V-CHIP

On

Menu Exit

Channel

(1):Advanced selection: only ATSC program is available.

(2):Option:Used to edit CC font.

Press button, the screen will display as follow:

Audio

Picture

Mode

Font style Font size Default Font Edge style Default

Font Edge color Default FG color Default BG color Default FG opacity Default

BG opacity Default

Select Adjust

Timer

Setup

V-CHIP

Custom

Default

Menu Exit

Channel

NOTE: Only ATSC program is available.

Timer

Setup

----

V-CHIP

Menu Exit

Audio

Picture

New password

Confirm password

Select Adjust

1).New password: Input the new password

2).Confirm password: Input the new password again

-12-

Channel

OPERATION

5.2 V-CHIP

When the switch is ON, the below options can be adjusted.

switch:

Parental Control

5.3 US: Press button, the screen will display as

follow:

Picture

Audio

TV

MPAA

Select Adjust

1):TV: Press button, the screen will display as follow:

Picture Audio

ALL FV V S L D

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

Block Press ENTER to lock or unlock

Select Adjust

Rating Content

TV-Y (All children)

TV-Y7(Direct to order children)

Suggested

TV-G(General

age

audience)

TV-PG(Parental Guidance suggested)

TV-14(Parents strongly cautioned)

TV-MA(Mature audience only)

And use ENTER key to switch lock/ unlock

feature.

Control

FV (Fantasy violence)

Timer

X

TV rating

V (Violence)

Setup

V-CHIP

Channel

X

Menu Exit

P.G

Menu Exit

Content

S (Sexual situation)

X

Channel

L (Adult language)

X

Setup

X

Parental

D (Sexually suggestive dialog)

X

2).MPAA:switch the movie-rating control level; N/A, G,PG, PG-13,R,NC-17,X.

Rating

Description

G General audiences, All Ages admitted

Parental Guidance suggested. Some material may not be

PG

Suitable for children.

Parents strongly cautioned. Some material .may be

PG-13

Age

5.4 Canada: Press button, the screen will be displayed as follow:

1): Canada English: switch the english rating control level:E,C,C8+,G,PG,14+,18+.

Rating

E Exempt: Includes news, sports, documents and other information programming: talk shows, music videos, and variety programming.

C Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that securityand well-being.

C8+ Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen .

G General: Considered acceptable for all age groups, Appropriate

Age

viewing for the entire family, contains very little violence, physical, verbal or emotional.

PG Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.

14+ Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline , But it must be integral to the devel opment of plot or character. Language usage could be profane and nudity present within the context of theme.

18+ Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of secretary and nudity.

Inappropriate for children under 13.

Restrict. Under 17 requires accompanying parent or adult

R

guardian(age varies in some jurisdictions)

NC-17

No one 17 and under admitted.

X is an order rating that is unified with NC-17 but may be

X

encoded in the data of order movies.

Picture

Canada English

Canada French

Select Adjust

Audio

Timer

Setup

P.G

14+

E

Menu Exit

Description

could threaten their sense of

Channel

-13-

OPERATION

2).Canada French: switch the French-rating control level: E, G,8ANS+,13 ANS+,16ANS+,18ANS+.

Rating

Description

E Exempt programming

G General :All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner .

8ans+ General but inadvisable for young children :May be viewed by a wide public audience, but could contain scenes disturbing to

Age

children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing with paren.

13ans+ Over 13 years: Could contain scenes of frequent violent scenes and in tense violence.

16ans+ Over 16 years: Could contain frequent violent scenes and violence.

18ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.

5.5 RRT setting: in ATSC digital TV mode, it could be adjusted

5.6 Reset RRT: Press button, the screen will be displayed as follow:

Picture

Audio

Timer

Are you sure?

NO

Select Adjust

Setup

YES

V-CHIP

Menu Exit

Channel

6. Channel MENU

The sixth item of the MENU is Channel MENU. You can adjust digital and analoge TV Channel . Press to move, press to adjust here.

Timer

Setup

V-CHIP

Cable

2-1

Menu Exit

Channel

Audio

Picture

Air/cable

Auto Scan

Favorite

Show/Hide

Channel NO.

Channel Lable.

DTV signal :

Select Adjust

1). Air/Cable: select Air TV signal and cable TV signal.

2). Auto Scan: If it's the first time you use the TV, you

should scan all the TV channels first, press the button to confirm, you will see below menu :

Picture

Audio

Timer

Start to scan

Select Adjust

A: Start to scan: press the button to confirm, you

will see below menu which indicates auto search is in process.

Audio

Picture

3). Favorite: Press button to choose/delete the favorite channel .

4). Show/Hide: Press button to display or hide currently channel.

5). Channel NO . :Display the currently channel number.

6). Channel lable: Press button to edit currently channel name.

7). DTV signal: Display DTV signal intension. It can't be selected and adjusted.

Timer

R F CH: 4

FOUND: 0

Select Adjust

Setup

V-CHIP

Menu Exit

V-CHIP

Menu Exit

Channel

-14-

Trouble shooting

Trouble phenomenon Symptom

Picture Audio

Snow Noise

Ghost

Interference

Normal Picture

No picture Mute

No colour Normal audio Colour control

Normal audio

Noise

Mute

Inspection Check

antenna position, direction or connection

electronic equipment,car/ motorcycle,fluorescent light

Volume(check if mute is activated or if the audio system connections are not correct)

Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote control for inspecting

Picture breaking up

No colour

Normal audio or weak

Noise

retune channel

TVsystem

The LCDTV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white. Please note this does not affect the performance of the product.

-15-

Viore,Inc. 7801 Hayvenhurst Avenue, Van Nuys,CA 91406

Printed in China