VIORE 10.2"" PORTABLE LCD TELEVISION WITH BUILT-IN DVD PLAYER PLCD10V59, PLCD10V59 Operating Instructions Manual

Download

Page 1

Page 2

Page 3

Safety Precautions

User Guidance Information

Connection

Basic Use

Application

Maintenance and Service

Cleaning and Maintenance

- Power Supply

- Installation

- Use and Maintenance

- Important Safety Instructions

1 2 3 4-5

- Operating the menu

- Customizing the PICTURE Settings

- Customizing the FUNCTION Settings

- Customizing the TUNING Settings

- EPG menu

- Closed Caption

13 14

15 16 17 17

- Accessories

- Names of each part

- Remote Control

6 6-8 9

- Input connections

- Headphone connection

11 11

- Power connection

- Antenna connection

10 10

- Powering the LCD TV

- Selecting input source

12 12

- Troubleshooting 27

DVD Operation

- Getting Started 18

- Card Reader and USB Playback 23

- DVD Functions operating instructions 19-22

- DVD system operation 24-25

- Maintenance for disc 26

CONTENTS

Page 4

Warnings

Cautions

Power Supply

Do not touch the power plug with wet hands.

. Doing so may result in electric shock.

Do not use a damaged power cord or plug or a loose outlet.

. Doing so may result in fire or electric shock.

Do not plug several devices into the same outlet.

. Doing so may cause the outlet to overheat and start a fire.

Insert the power plug fully into the outlet.

. A loose or improperly inserted power plug may result in fire.

Do not bend the power cord excessively or place heavy objects on it.

. Doing so may result in fire or electric shock.

Be sure to ground the unit.

. Failing to do so may lead to electric shock when a short circuit or overload occurs. If necessary, install a ground fault circuit breaker. Never ground to a telephone line, lighting rod, or metal gas pipe.(Doing so may result in fire, electric shock, or other hazards.)

When disconnecting the power cord from an AC outlet, always grasp it by the plug.

. Pulling on the cord can damage the internal wire and may result in fire.

Always unplug the unit before cleaning.

. Not doing so may result in fire or electric shock.

The purpose of these precautions is to ensure user safety and prevent property damage. Be sure to read and observe all safety precautions.

Safety Precautions

Page 5

Warnings

Cautions

Installation

Do not place the unit where it is exposed to rain, excessive moisture or grease.

. Doing so may result in fire electric shock, malfunction, or deformation.

Do not use or store flamm able or combustible materials near the unit.

. Doing so may result in fire or explosion.

Do not place a burning candle, burning anti-mosquito incense,

or lighted cigarette on top of the unit. Do not place the unit near any heat source sunch as a fireplace or space heater.

. Doing so poses a serious risk of fire.

Do not run power cords near heat-producing appliances such as radiators, stoves, or irons.

. The excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.

. If rainwater finds its way inside the unit, it may result in fire or electric shock.

Do not cover the unit with a tablecloth, curtain, or other material.

. If the temperature inside the unit rises, it may result in fire.

Form a drip loop where the coaxial antenna cable enters your building to prevent rainwater from traveling along the cable and coming in contact with the antenna input terminal.

Install the antenna away from high-voltage power lines and communication cables and make sure it is installed securely.

. If the antenna touches a power line, contact with the antenna could result in fire, electric shock, serious injury, or death.

Warning

The following precautions are divided into “Warning” and “Caution”. Warning: lgnoring this precaution may result in death or serious injury. Caution: lgnoring this precaution may result in injury or property damage.

Safety Precautions

Page 6

Warnings

Cautions

Use and Maintenance

Disconnect the power cord from the wall outlet during an electric storm.

. Not doing so may result in fire or electric shock.

When not using the unit for long periods of time, disconnect the power cord from the wall outlet.

. Dust could accumlate over time on the unit and cause it to generate heat and ignite, or deteriorate insulation, which in turn may result in an electrical fire.

Do not insert any metal objects, such as a screwdriver, paper clip, or A/V terminals..

. Doing so poses a serious risk of fire or electric shock.

Never disassemble or modify the unit in any way. Do not attempt to service the unit yourself.

. Doing so may result in fire or electric shock. If the unit requires repair, contact the service center.

When moving the unit, be sure to turn off unit and unplug the power cord from the wall outlet.

. Moving the unit with the power cord connected to the outlet may cause damage to the cord, resulting in fire or electric shock.

If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center.

. Failure to do so may result in fire or electric shock.

. If a child has swallow a battery, seek medical atten tion immediately.

When removing the batteries from the remote control, make sure children do not swallow them. Keep the batteries out of the reach of infants and children.

Warning

Wipe off any moisture, dirt, or dust on the power plug pins with a clean dry cloth.

. Failure to do so may result in fire or electric shock.

Always turn off the unit and unplug the power cord when cleaning the unit. Use a soft dry cloth to clean the unit.

. Never clean with industrial strength polish, wax, benzene paint thinner, air freshener, lubricant, detergent, or other such chemincals. Also, do not clean with a damp cloth.

As a disconnect device from the MAINS, the MAINS plug of the attached adapter shall remain readily operable.

Safety Precautions

Page 7

Important Safety Instructions

Safety Precautions

Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, the apparatus does not operate normally, or the apparatus has been dropped.

Page 8

Important Safety Instructions

Apparatus with Class I construction shall be connected to a Main socket outlet with a protective earthing connection.

Servicing is required when the apparatus has been damaged in any way. Your TV could require servicing if any of the following occur:

• Supply cord or plug is damaged

• Objects have fallen into the apparatus

• Apparatus has been exposed to rain or moisture

• Apparatus has been dropped

• Apparatus does not operate normally

Safety Precautions

This unit complies with America Safety directives.

This unit complies with FCC directives.

Page 9

Front view

Accessories

Names of each part

The following accessories are included in the package

12345

STANDBY —Switch the power on/standby.

MENU —Press to display the OSD menu.

CH+/- —Channel Program up/down.

VOL+/- —Volume up/down.

TV/AV —Input source select.

LED indicator and remote control window. LED Blue – Power ON, LED Red – Standby

ANT.IN —Connect to antenna. SD/MS/MMC card reader USB jack AV IN —Video & Audio input. AV OUT —Video & Audio output. EAR PHONE— Headphone out. ON/OFF —Power switch: up--power on, down--power off. Power led indicator: Light red—Battery is not full. DC IN —Connect to DC power supply.

Profile view

User Guidance Information

retpada raCretpada rewoP senohpdaeHAV connection cableTV antennaediuGs

Remote Control

’resU

STANDBY DISPLAY

MUTEINPUT

10+

AB/EPG

LANG

SUBTITLE

GOTO

EXIT

TITLE

VOL-

VOL+

LCDMENU

DVDSETUP

FAV TEXT ZOOM

SLOW

STEP

REPEATINTROPROG

ANGLE

DVB MENU

CH+

CH-

STANDBY DISPLAY

MUTE

-/--

A-B

LANG

GOTO

VOL-

VOL+

ZOOM

SLOW

REPEATINTROPROG

CH+CH-

EPG

DVD SETUP

SUB

SLEEP

ANG

TV/AV

TITLE

LCD MENU

DVD Tray

Page 10

Disassembly of TV Base

Wall-Hanging

Standing the TV with Bracket

Names of each part

User Guidance Information

slots

Page 11

Inserting Discs

User Guidance Information

The disc tray will open slightly.

Pull the tray gently to open completely.

There are two ways to open the disc tray:

Page 12

-/--

VOL-LVO -

VOL+VOL+

SLOW

CH+CH-

EPG

DVD-SETUP

10+

SLEEP

LANG

STANDBY DISPLAY

MUTE

TV/AV

LCD MENU

GOTO

REPEATINTROPROG

Remote Control

Function of remote control buttons

The remote control uses infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle.

STANDBY : Press to turn the TV on/standby.

DISPLAY: Press to display the current program information.

TV/AV: Press to display the input source menu. MUTE: Press to mute the TV, press again or press VOL+/-

button to unmute.

VOL+/-: Volume up/down.

ANG : Select DVD picture angle.

CH+/-: Channel/program up/down.

Buttons for DVD/Media operation

SLEEP : Timer.

SUB: Press to turn on/off the subtitle display.

SLOW: Slow the playing speed. DVD SETUP: Press to display the SETUP menu.

PROG: Edit the program and play. INTRO: Intro/scan/9 picture display. REPEAT: Repeat playing the title or chapter. GOTO: Play your favorite title/chapter/track.

EPG: To show the Electronic Program Guide during no-menu

state only(see page 17).

LANG: Press to display the language select menu. CC: Closed caption(see page 17).

ZOOM: Press to change the screen display mode.

NUMBER buttons and -/-- button:

Choose channel directly. Press -/-- buttons to select “-”, and press a number button to select the channel; Press -/-- buttons to select “- -”, and press two number buttons to select the channel; Press -/-- buttons to select “- - -”, and press three number buttons to select the channel;

:Return to the previous channel viewed.

LCD-MENU: Press to display OSD menu.

on-screen menus and adjust the system settings to your preference.

ENTER : Confirm for source menu.

THUMBSTICK

: Allows you to navigate the

How to use the remote control

- Check the polarity(+,-) of the batteries in the remote control.

- Check that the batteries have power.

- Check that the LCD TV is powered and that it is properly plugged in.

- Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV.

- The remote control should be operated within 30 feet (7m) and 30° to the left and the right of the IR receiver at the front of the LCD TV.

- Used batteries should be disposed properly.

User Guidance Information

: Play/pause. : Stop

: Fast reverse/forword.

: Previous chapter/next chapter.

Step3

Insert a batteries. Ensure that the polarities(+ and -) of the batteries are aligned correctly.

Step1 Step2

A-B

ZOOM

SUB

ANG

TITLE

A-B: Select and play the preferable paragraph of program by pressing this key twice at the beginning and end of it.

Page 13

Power connection

Power Connecting

1. Connect the small round plug on the power adapter cable to the power input socket at the rear of the set.

2. Connect the power adapter to the main supply.

Analog+Digital 75

Coaxial(Round)Antenna Cable

External Antenna

Wall jack with F-Connector

Connection

Antenna connection

Note:

This model has a built-in rechargeable Li-ion battery. You can enjoy watching TV for approximately 2 hours using battery power after a full charge. You can charge the battery by connecting the supplied AC adapter. It will take about 3 hours to charge fully.

Power adapter (Included)

Power Outlet

Page 14

Input Connections

Headphone Connection

Connection for headphones

Connection

Watching Video Signal

* Connect the LCD TV’s AV IN/OUT terminal to the output/input terminals with a Composite Cable and an AV Connection Cable(supplied) as the picture shows.

1. Connecting the DC power supply, pushing the power switch “OFF/ON” up, and press “STANDBY” button to turn on the LCD TV.

2. Pressing “TV/AV” button on the LCD TV or “TV/AV” button on the remote control to display the input source menu, using buttons to move to “AV”,

press button to confirm.

3. Turning on the VCR etc.

Note: After you connect to the TV by the AV OUT jack, you will see the video playing on the TV.

ENTER

AV OUT

External video source such as VCR

AV Connection Cable (Included)

Composite Cable (Not included)

Page 15

Press button on the remote control.

Use to move to the desired input source.

Press to select.

Powering the LCD TV

To turn on the LCD TV.

ENTER

TV/AV

Connect the DC power supply. Push the switch up, and then press STANDBY on the LCD TV.

To turn off the LCD TV.

To turn on/off the LCD TV by remote control

Pressing button.

Selecting Input Source

* You can select between the TV signal and the input signal of other equipments connected to the TV. * Use this function to switch to the input source you wish to view.

Press the STANDBY button on the LCD TV, and push the switch down.

STANDBY

Basic Use

SOURCE

DTV

DVD

Page 16

4. Use the and buttons to select an option of the sub-menu, and press the button. While in adjustment mode, use the and buttons to change the value of the item.

5. Press the LCD-MENU button to exit the menu.

Note: Only when you input the suitable signal, the relevant items can be activated.

1. Press STANDBY button to turn the LCD TV on.

2. Press LCD-MENU button on the remote control; the on-screen menu will appear on the screen.

3. Use and buttons to select your main menu option.

Operating the menu

1. TV / DTV menu

Allows you to make adjustments to your picture settings. (Select TV/DTV source for example)

3. TV menu

Allows you to setup a variety of setup options.

(Select TV source for example)

3. DTV menu

Allows you to search channels and setup a variety of channel options.

(Select DTV source for example)

2. TV / DTV menu

(Select TV/DTV source for example)

4. If you do not have a remote, use the following buttons to select an option from the sub-menu: LCD-Menu = menu or exit CH+/- = Scroll up and down Vol. + = Select

Application

TIMEZONE

DAYLIGHT SAVE

ANTENNA

AUTOSEARCH

SAMOA

OFF

AIR

Page 17

Press LCD-MENU button on the TV set to display the OSD MENU.

Customizing the PICTURE Settings

The OSD menu includes the following options:

Brightness Controls the overall brightness of the picture

Contrast Controls the difference between the brightest and darkest regions of the picture.

Saturation Controls the saturation of the picture.

Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges.

Hue Controls the hue(only used in NTSC mode).

Application

Page 18

Press LCD-MENU button twice on the TV set to display the OSD MENU.

Customizing the FUNCTION Settings

The FUNCTION menu includes the following options:

Language Select the OSD menu language.

Blue Screen Turn on/off the blue screen display when there’s no signal.

Wide Screen Control the OSD menu display mode on the screen: 16:9, 4:3.

Reset Press button to reset all the set above.

Application

Page 19

Customizing the TUNING Settings

Application

Autosearch Press button, the screen will display a cue, and use and button to

select “YES” or “NO”, if you select “YES”, and press ENTER button to confirm, it will start to autosearch.

The TUNING menu includes the following options:

Press LCD-MENU button thrice on the TV set to display the OSD MENU.

Skip Skip the channel when you scan the channels with

Time Zone Select the Time Zone for your TV set according to you area.

Daylight Save Turn on/off the Daylight Save function.

CH+/- button if you turn on

the function.

AFC Automatic frequency control, the LCD TV will autosearch the best signal on the

appointed frequency if you turn on the function.

Fine Tune Fine tune the frequency of the channel.

Note: the AFC will be turned off automatically when you start to fine tune.

Antenna Select the TV source input: AIR, CATV.

(in TV mode)

Tuning menu in TV mode

Tuning menu in DTV mode

TIMEZONE

DAYLIGHT SAVE

ANTENNA

AUTOSEARCH

SAMOA

OFF

AIR

Page 20

Press button on the remote control in DTV mode, the screen will display the Guide menu as below. Press button to cancel.

Note: The content shown in the picture above is just an example.

EPG menu

EPG

Press button on the remote control in DTV mode, the screen will display the Closed Caption as below. Press button to cancel.

CC Display Turn on/off the Closed Caption display.

CC Type Select the Closed Caption service.

CC Mode Select the Closed Caption mode from Broadcast/Customer.

CC Customer Press button to go to the CC customer menu to custom the CC style.

(Available only when the CC mode is selected to Customer)

Closed Caption

Application

Page 21

DVD Operation

Getting Started

1. Select DVD source

- Turn on the LCD TV and press TV/AV button to display the input source menu, select DVD by / button, and press OK button to enter the DVD source.

2. Insert Disc

- Insert the disc according to the instructions on page 8. The screen will display “READ” and the disc contents will be read. NOTE: When inserting the disc, make sure that the printed side of the disc is facing forward. Inserting discs incorrectly may damage the player.

Note 1: Playback of DVD-R/RW, DVD+/RW, CD-R, and CD-RW discs is also supported. Playback of all writeable/re-writeable discs cannot be guaranteed due to variations in media quality, burner hardware and software quality and speed beyond the manufacturer’s control. Failure to play certain discs is not an indication of a problem with your player.

Note 2: The TV support the mp3 files with the Bit Rate between 32K and 320Kbps. Note 3: The TV support the JPG files up to 14592 x 12888pixel or 179 Mega-pixel. And it will take a lot of time

to read the files when it is larger than 5M.

Region Code 1

As it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code into your player you will see the region code notice on the screen. The disc will not playback and should be unloaded. The region code for this player is 1(refer to the symbols below).

Supported Disc Formats

3. Play the DVD

- After the disc has been read, the title menu will be displayed. Select “PLAY” to commence playback. The

button may be used to toggle between PLAY and PAUSE modes.

Page 22

DVD Operation

DVD Functions operating instructions

- Press TITLE button. The screen will show “TITLE”.

- Playback will commence from the first chapter of the selected title.

Page 23

DVD Operation

DVD Functions operating instructions

STEP

Page 24

DVD Operation

DVD Functions operating instructions

Page 25

DVD Operation

DVD Functions operating instructions

Page 26

DVD Operation

Card Reader and USB Playback

4 5

- The following files formats are supported by this TV: JPG, MP3, WMA, MP4 (DivX3.11-5.11, Xvid), MPEG1 (DAT, MPG, MPEG), MPEG2 (mpeg, mpg).

- File formats including the following are not supported by this TV: BMP, PNG, AAC, DivX 6, DivX HD, Vob, ts.

- The following cards are supported by this TV: SD, MMC, Memory Stick (MS).

- Only full-size card formats are supported. If you wish to use compact formats such as miniSD, microSD, Memory Stick Duo etc., please be sure to use an adapter to convert to the full-size format.

1) Insert your USB device or card.

2) Press the TV/AV button until DVD mode is selected. The contents of your memory device are automatically displayed.

3) If the contents of your memory device are not automatically displayed, press the DVD-SETUP button on the remote control to display the DVD setup menu as below.

SD/MMC/MS card reader

USB jack

Ź6HOHFWSYSTEM SETUPXVLQJŸźDQGSUHVVOK to

select

Ź6HOHFWSOURCE and press OK to select Ź6HOHFWUSB/CARD and press OK to enter the folder

and file navigation screen as below.

4) Play the Music, Video or view the Photos

Ź8VHŻŹWRVHOHFW(3) - Music, (4) - Photo or (5) - Movie. The list of folders is displayed in area (1).

Ź6HOHFWDUHD(1) XVLQJWKHŻŹNH\VDQG VHOHFWWKHIROGHUXVLQJŸź7KHOLVWRIILOHV

is displayed in area (2).

Ź6HOHFWDUHD(2)XVLQJWKHŻŹNH\VDQG VHOHFWWKHILOH\RXZLVKWRSOD\XVLQJŸź Ź3UHVVENTER button to begin playback.

NOTE:

1. Pressing the (STOP) button on the remote control during playback will halt playback and return to the file and folder navigation screen.

2. The following keys have specific functions during photo playback:

ŻŹ5RWDWHLPDJH Ÿź)OLSLPDJH

: Display the next photo : Display the previous photo

AUTO

DISC

USB CARD

Page 27

DVD Operation

DVD system operation

System operation will define the setting of the set; these definitions will be stored until you change them again.

Accessing the Setup Menu

1. Pause or Stop the player. Press DVD-SETUP on the remote control. The main menu will be shown as

Menu specification

1. SYSTEM SETUP

The system setup options are illustrated below:

below.

2. Press the

/ buttons to select the Icon of the desired section, e.g. “TV System" and press button

to open that section.

3. Press

/ to select the desired feature and again press button to open that section.

4. Press

/ to select the desired feature and then press "ENTER " to select the new setting.

5 To exit the menu, press "DVD-SETUP" or

to select EXIT SETUP and then press " ENTER "

When launching the setup routine, the pressing of the following buttons will turn off the setup menu, while the choices that have been changed will be saved.

TV SYSTEM

According to the Color system of your TV, select proper TV TYPE.

SOURCE

Select the source of the information you want to play: AUTO, DISC, CARD, USB

TV TYPE

Format 4:3 PS, 4:3 LB, 16:9

PASSWORD

The password option is initialized as locked. You cannot set the ratings limit or change the password. To enable these features you must unlock the Password. The default password is "0000". Using the

button, move the highlight to "PASSWORD", press the button and enter "0000". You will see the padlock symbol open. You may now change the RATING or put in a new password number. If the Lock symbol is BLUE you must press the button to enter the lock field, the lock symbol will change to YELLOW, you may now enter a new 4 digit number. Please remember or write down the new Password and keep safe.

Page 28

DVD Operation

DVD system operation

2. LANGUAGE SETUP

The language setup options are illustrated below:

- OSD LANGUAGE: The OSD will display in the language you choose.

- AUDIO LANG: If the disc you are playing has the language you choose, it will output audio in that language.

- SUBTITLE LANG: If the disc you are playing has the language you require you may select this either in the Menu or using the "SUBTITLE" button on the Remote control. You may also switch this OFF.

- MENU LANG: If the disc you are playing has the language you require you may select this.

3. AUDIO SETUP

4. DIGITAL SETUP

The video setup options are illustrated below:

- DYNAMIC RANGE: Use the

/ button to move the scroll and adjust the dynamic range.

- DUAL MONO: Choose the mode of the audio output.

- There are four modes: STEREO, MONO L, MONO R, MIX MONO.

-TONE: Use the

/ button to move the scroll and adjust the tone.

RATING The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection.

Page 29

Cleaning and Maintenance

Maintenance for disc

Page 30

Trouble shooting

noitcAmelborP

The screen does not appear.

Is the power plug pulled out? Insert the power plug.

Press the power button.

The screen appears too

This problem occurs for a brief time in the progression of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on. If the screen does not appear after one minute, contact your dealer or an authorized service center.

slowly after the power is turned on.

Screen is too bright or too dark. Perform brightness adjustment or contrast adjustment.

Screen is too large or too small. Adjust the screen size.

Stripes appear on the screen

This problem can occur if wireless telephones, hair dryers, or electric drills are used near the TV.

and it shakes.

Screen appears, Voice is not heard

1. Press the "MUTE"button.

2. Increase the sound level by pressing volume adjustment button.

3. Check if sound terminal of external input is connected properly.

4. Check if audio cables are connected properly.

5. Select and check the other input.

If the sound still does not work and you have checked every channel to ensure that the problem is not channel specific, contact your dealer or an authorized service center.

Remote control does not work

1. Check if main power is On.

2. Check that the batteries of the remote controller were loaded properly.

3. Check to see if any obstacle exists between the LCD TV and the remote control.

4. If the batteries have no power, replace them with two new batteries.

- In case a problem occurs with your LCD TV, please take the following steps first.

- If the problem still occurs, turn the power off and contact your dealer or an authorized service center.

Maintenance and service

Page 31

Ver. 090905 Printed in China

VIORETM LIMITED WARRANTY

Model: PLCD10V59

This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VIORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.

Proof of purchase within one year from date of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is within the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must be presented as a pre-condition to obtaining the limited warranty service.

This limited warranty begins on the original date of purchase, and is valid only on Products purchased through VIORE authorized dealers and used in the United States by the original purchaser. To receive warranty service, the purchaser must contact VIORE for problem determination and service procedures. Warranty service may only be performed by a duly authorized VIORE service center. The original dated bill of sale, receipt or receipted invoice must be presented upon request as proof of purchase to VIORE or VIORE's authorized service center.

VIORE will repair or if repairs cannot be made, VIORE will replace this Product at no charge if the Product is defective as specified in this limited warranty during the limited warranty period. VIORE may use new, or remanufactured parts or products to repair or replace the Product at its sole discretion. All replaced parts and Products become the property of VIORE and must be returned to VIORE. Replacement parts and Products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.

Product freight needs to be prepaid by original purchaser and shipped in either its original packaging or packaging affording an equal degree of protection. VIORE shall not be responsible for or obligated to replace damaged goods. If you reside in California and you cannot transport the television due to the size, weight, and method of attachment, VIORE will provide transportation for the television to the repair facility. If you reside in a state other than California, you are responsible for the costs of transporting the television to a repair facility.

If the product is received damaged by VIORE, it is the responsibility of the consumer to file a claim against the carrier. VIORE will only store the damaged product for 30 days and reserves the right, in its sole discretion, to dispose of the damaged product or ship it back to the consumer at consumer’s expense after 30 days.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: to consumable parts, such as batteries, unless damage has occurred due to a defect in materials and workmanship; store display products; product sold as a “marked down” special; product sold in “as is” or, "open box" condition; products missing accessories; products received with no fault found; products damaged at time of delivery to VIORE; damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by VIORE which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; burned-in images. VIORE does not warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON VIORE. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VIORE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT; EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Any provision contained herein which is found contrary to state or local laws shall be deemed null and void and the remaining provisions shall continue in full force and effect.

To obtain warranty service, please contact VIORE at:

Phone: 1-877-777-1428

www.viore.com

Page 32

VIORE, Inc. 7801 Hayvenhurst Avenue, Van Nuys, California 91406 Printed in China