Violet design GARNET BROCHURE

Page 1
THE GARNET
20 30 50 70 70 200 300 500 700 1K 2K 3K 5K 7K 10K 20K
db O
-4
+4
20 30 50 70 70 200 300 500 700 1K 2K 3K 5K 7K 10K 20K
db O
-4
+4
20 30 50 70 70 200 300 500 700 1K 2K 3K 5K 7K 10K 20K
db O
-4
+4
The Violet Design Garnet is an electrostatic vacuum tube microphone. Its vintage sound is warmed by vacuum tube circuitry and an output transformer. The Garnet uses a specially designed large dual-diaphragm transducer, which can be adjusted to nine different polar patterns.
The Garnet’s multi-layer brass mesh grille keeps frequency response and sound details clear while its massive body construction provides low mechanical noise and solid bass response. An external elastic suspension shockmount is included to protect the Garnet from stand rumble, subsonic vibrations, and external shocks. Its Class 'A' fully discrete internal vacuum tube preamplifier provides high output, low impedance and low distortion. The Garnet has a large humbucker, custom-wound audio transformer that balances the microphone’s output, separating it from external interference and providing additional analog warmth to the sound. A soft starting, smart power supply is included.
APPLICATIONS
The Garnet is perfectly suited for hi-end professional recording. It excels when capturing vocals, speech, and choir, but also performs well for capturing musical instruments, orchestra and most other sound sources. The Garnet is a solid solution for broadcast and television studios, as well as the film and video industries. It can be used effectively for other professional applications including sound reinforcement and installed sound systems. Using the Garnet for project studio and home recording will upgrade your work to a higher quality, professional sound level.
SPECIFICATIONS
FREQUENCY CHART:
Transducer type: electrostatic Operating principle: pressure gradient
OMNI
Frequency range: 20 Hz to 20 kHz Polar pattern: 9 position multi-directional Output impedance: 100 ohms Rated load impedance: 1000 ohms Suggested load impedance: > 250 ohms
CARDIOID
Sensitivity at 1000 Hz into 1000 ohms load: 25 mV/Pa S/N Ratio (CCIR 468-3 weighted): 74 dB S/N Ratio (DIN/IEC 651 A-weighted): 85 dB-A Equivalent noise level DIN/IEC A-weighted: 9 dB-A Maximum SPL for 0.5% THD at 1000 ohm load: 130 dB
FIGURE 8
Diaphragm’s active diameter: 1" (26mm) Dynamic range of the microphone preamplifier: 97 dB Powering: PSU-5 power supply Current consumption: < 2 mA Mic output connector: XLR-7M with gold-plated contacts PSU-5 input connector: XLR-7F with gold-plated contacts PSU-5 output connector: XLR-3M with gold-plated contacts Signal polarity: positive pressure on diaphragm produces positive voltage on pin #2 of output XLR on power supply Dimensions & Weight: 9.06" (h) x 1.97" (w) x 1.18" (d) / 1.8 lbs. (230 x 50 x 30mm / 800g) Included accessories: PSU-5 power supply with cable, mic cable, shockmount
THE GARNET
Exclusively distributed in the Americas by
9770 Silicon Prairie Pkwy • Madison, WI 53593 USA
tel: 608-227-2040 • fax: 608-831-1890
violetusa.com
Loading...