Page 1
REMOTE CONTROL
RECO V220 / V281
USER´s Manual
Revision 1.0
With the optional remote control
RECO V220 / V281
for the headphone
amps
HPA V220 / V281
you are able to
- select one of three inputs
- select two output functions
- release a mute / unmute
- control the volume
For that purpose a ALPS RK 27 potentiometer is present which is driven
by a built-in gear motor. Of course the volume can be controlled
manually all the time – even when the motor is in action !
The remote control itself is a universal programmable type, the model
URC-7140 from One-For-All.
This remote control is capable to manage even more items of your
personal stereo set. Learn how to proceed with the attached manual or
follow the instructions on this site:
http://www.oneforall.de/uploads/support/7ae414313a96d19ec40b4010b3c2e73d.pdf
Feel free to transmit the infra-red codes from this remote control to your
preferred model, when it is suited for this purpose.
Page 2
The Operation
Your URC-7140 remote control is pre-installed to operate PRE V630.
When the “AMP mode is selected by pushing one or more times the
“Mode“- switch, the inputs, mute and the volume may be controlled
from the distance.
Page 3
… if you want to try yourself …
Reset of the remote control:
-
press “MAGIC“ for 3 Seconds
-
push 9 - 8 - 1 on the keyboard
-
a Reset is performed
To program a „foreign“ mode
The PRE V630 is controlled by a TV-Code !
Generally a TV code can only be programmed under the “TV” mode.
To enable the programming of a “foreign” mode (like “AMP”) the remote
control can be prepared as follows:
- press “MAGIC“ for 3 Seconds
- push 9 – 9 – 2 on the keyboard, a LED flashes 2 x
- select the mode which shall be copied by pushing the mode button
several times (in this case „TV“)
- press “MAGIC“ shortly, the “TV“-LED flashes once
- select the destination mode by pushing the mode button several
times (in this case “AMP“)
- press “MAGIC“ for a longer time, the “AMP“-LED flashes 2 x
Now you can program a “TV“- Mode code in the “AMP“- Mode !
Program the PRE V630 code:
Please note:
the code used for PRE V630 is a very old TV code and so
chances are high that no other electronic item is controlled accidentally.
Before entering a code the destination has to be prepared when the
code is of “foreign” kind (see above).
- press “MAGIC“ for 3 Seconds
- select the destination mode TV - SAT - DVD - AMP by pushing the
mode button several times
- push 0 – 0 – 3 - 7 on the keyboard, the affiliated LED flashes
several times
Page 4
How to indentify a Code:
Attention: no
flashing with
number “0“ !!
- press “MAGIC“ for 3 Seconds
- select the mode to be checked (TV - SAT - DVD – AMP) by pushing
the mode button several times
- push 9 – 9 – 0 on the keyboard, the affiliated LED flashes once
- press key “1“ on the keyboard, the value of the first digit is
displayed by the flashing LED
- press key “2“ on the keyboard, the value of the second digit is
displayed by the flashing LED
- press key “3“ on the keyboard, the value of the third digit is
displayed by the flashing LED
- press key “4“ on the keyboard, the value of the fourth digit is
displayed by the flashing LED
ExampleCode 0 0 3 7
Flashing - - 3 7
Key / Digit No. 1 No. 2 No. 3 No. 4
LAKE PEOPLE electronic GmbH
Turmstrasse 7a
D-78467 Konstanz
Fon +49 (0) 7531 73678
Fax +49 (0) 7531 74998
Web www.violectric.de
www.lake-people.de
Loading...