Vintage Cellars VintageView 4 Assembly Instructions

Wine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: [phone] • fax: [phone]

Please feel free to contact us regarding the assembly of this product.

Required tools: Electric Screw Driver with #2 Phillips Bit
2 X 14mm (or adjustable) Wrench
IDR-AK - included with IDR and contains an
8mm Nut Driver and Alignment Tool

8 X

†

2 X

IDR-PR

†

4 X

Footer Pad

IDR4-UPRIGHT

†

IDR Extension packages contain only 1 IDRx-UPRIGHT and 2 footer pads.

VintageView Select 4
(IDR4-PRS) Assembly
Instructions

Hardware shown

actual size

24 X

IDR-PR Assembly

Screws

32 X

IDR-PR Assembly

Washer

16 X

IDR-PR Assembly Bolt

1. Assemble presentation racks – Position presentation racks
back to back as shown. Using nut driver (included), a Phillips
head screwdriver (not included) attach presentation racks with
presentation rack assembly screws. Fully tighten.

2. Install footer pads - Thread footer pads into the
bottom of the uprights and tighten with a 14mm wrench.

3. Mount presentation racks to frame – Align a presentation

rack mounting plate to the uppermost mounting hole on an

upright. With the presentation rack assembly bolt, and washer,

insert bolt through presentation rack and upright, complete with

second washer, and nut. Tighten with 14mm open end wrench (not

included). Repeat for the other side. Working downward, install the

remaining presentation racks.

4. Finishing steps – Fully tighten all bolts and snap mounting hole

covers in place. Fill with wine and enjoy!

Lifetime Warranty

Wine Master Cellars, LLLP (WMC) warrants to the original consumer-purchaser that this product shall be free from defects
in workmanship and materials under normal and reasonable use for the lifetime of the product. WMC will, at its option,
renish or replace any product or part found to be defective during the warranty period and excludes installation charges,
shipping costs, and the cost of removal and reinstallation. WMC may require you to return the part(s) claimed to be
defective, for its inspection - freight or postage prepaid.
This warranty does not include the cost of any inconvenience or property damage due to the failure of the product and
does not cover damage due to Devine Act, third party act out of the control of WMC, misuse, abuse, accident, or damage
arising out of transportation of this product. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER OBLIGATIONS,
LIABILITIES OR WARRANTIES AND THERE IS NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
In no event shall WMC be liable or responsible for INCIDENTAL OR CONSEQUENTIAL DAMAGES or for any other direct or
indirect damage, loss, cost, expense, or fee. Neither the WMC distributor nor the retail establishment selling this product
has any authority to make any warranties or to promise remedies in addition to or inconsistent with those stated above.
WMC’s maximum liability, in any event, shall not exceed the purchase price of the product paid by the original consumer­purchaser.
All matters regarding the sale of the product or this warranty shall be governed by the laws of the state of Colorado and the
exclusive jurisdiction of and venue for any warranty claims or claims directly or indirectly related to the sale of the product
shall be Colorado. Any claim, or action relating the purchase of the product or this warranty must be led no more than six
(6) months after the date the claim arose. All statute of limitations to the contrary are waived.
Some states do not allow the exclusion or limitation of incidental or consequential damages. In such case, the above
limitations or exclusions may not be applicable. This warranty gives you specic legal rights and you may also have other
rights which vary from state to state.

Please call us toll free at 866-650-1500 for assembly assistance or to request replacement parts.

www.VintageView.com