Vintage Cellars RR-U-5H-8C User Manual

Assembly Reference Table

#1 Left Ladder # 2 Center Ladder #3 Right Ladder #4 Spacer Bar #5 Reveal Bar #6 Join Strip Bar #7 Hardware Kit

1 1 1 7 1 1 1

1 3 1 7 1 1 1

1 3 1 9 1 1 1

RR-U-4H-8C 1 7 1 9 1 1 1

1 1 1 11 1 1 1

1 3 1 11 1 1 1

RR-U-5H-8C 1 7 1 11 1 1 1

Additional items you will need to supply for assembly include Wood Glue, a soft rubber mallet and a power drill.

For more information or to view our assembly video visit us at

www.sustainablewinecellars.com

Reveal Display Rack

Reference Models

RR-U-3H

Spacer Bar Hole.

RR-U-4H

Connectors are pre-installed.

RR-U-3H-2C

RR-U-3H-4C

RR-U-3H-8C 1 7 1 7 1 1 1

RR-U-4H-2C 1 1 1 9 1 1 1

RR-U-4H-4C

RR-U-5H-2C

RR-U-5H-4C

RR-U-5H

Attach all but 1 Spacer Bar Final Assembly for stand alone unit. Final Assembly for joining Upper and

Lower Wine Racks.

For more information or to view our assembly video visit us at

www.sustainablewinecellars.com

strip to the lower rack, then
slide the top rack forward to

Reveal Display Rack

Drops of glue in each
Connector hole

Step 1

Attach Right End Ladder to Support Bars Attach Center Ladders Attach Left End Ladder

Drops of glue in each
Connector hole.

Step 2

Step 3

Second, secure the rear spacer
bars of both racks using small
finish nails. Pre-drill nail holes
to prevent splitting.

OR

DO NOT attach a bottom spacer bar to
this position at this time.

Step 4

For stand-alone rack, attach
pre-glued spacer bar here.

Step 5

Step 6

First apply pre-glued Join

engage pins.