Vintage Cellars Remote220V User Manual

C E L L A R P R O C O O L I N G S Y S T E M S

Remote Display Basic Operation

Overview
The Remote Display temperature controller option is similar to the standard

temperature controller with the following exceptions:

Basic Operation
Digital Display The temperature displayed on the control is red instead of

blue.

Quick Chill Button

Button

Icon

Auto Defrost
Mode

To activate the “Quick Chill” mode, press the “Up” button
for three seconds

To deactivate “Quick Chill”, press the “Up” button for
three seconds again

The “Quick Chill” indicator (Row 3) light will turn on when
the cooling unit is in “Quick Chill” mode,

In the “Quick Chill” mode, the cooling unit will run
continuously for 6 hours (or until the unit reaches set
point.). This mode is useful after loading “warm” bottles in
the cabinet.

The cooling unit has a factory default defrost cycle that
initiates every 16 hours for 20 minutes. When the cooling
unit is in auto-defrost mode, the “Defrost” Indicator light
(Top row) will turn on, and the evaporator fan will run.

C E L L A R P R O C O O L I N G S Y S T E M S

Manual Defrost

Light

Energy Saver

Hold the defrost button in for 3 seconds to initiate a
manual defrost. The “Defrost” Indicator light (Top row)
will turn on for a 20 minute defrost cycle.

The light button function is disabled, however pressing it
will turn on/off the light indicator on the display (2nd row).

The remote display is not configured with an Energy Saver
mode. The set point can be raised manually for periods
where energy savings is desired.