Vintage Cellars Le Cache Delivery Inspection Instructions
L E C A C H E P R E M I U M W I N E C A B I N E T S
I. I M P O R T A N T N O T E S
• WHEN TAKING DELIVERY OF YOUR WINE CABINET, FOLLOW THE INSPECTION
PROCEDURES DESCRIBED IN CHAPTER III.
• WAIT 24 HOURS BEFORE PLUGGING IN AND OPERATING YOUR CELLARPRO
COOLING UNIT.
• THE COOLING UNIT SHOULD BE PLUGGED INTO AN OUTLET CONNECTED TO
A 15-AMP CIRCUIT
• IF THE WALL OUTLET IS DIRECTLY BEHIND THE WINE CABINET, USE AN
EXTENSION CORD (GROUNDED; 14 GAUGE OR THICKER) AND COIL THE
EXCESS AT THE TOP OF THE CABINET SO THAT YOU WON’T NEED TO MOVE
THE WINE CABINET IN THE EVENT THAT THE COOLING UNIT NEEDS TO BE
REPLACED.
• WE RECOMMEND PLUGGING THE COOLING UNIT INTO A SURGE PROTECTOR
(MINIMUM OF 15-AMPS) TO PROTECT THE ELECTRICAL COMPONENTS FROM
POWER SURGES OR SPIKES.
P L E A S E N O T E!
UNTIL YOU’VE LOADED BOTTLES INTO YOUR WINE CABINET, DO NOT OPEN
BOTH DOORS AT THE SAME TIME. THE DOORS ARE EXTREMELY HEAVY AND
WHEN BOTH DOORS ARE OPENED, THE CABINET CAN TIP FORWARD IF THE
CABINET IS EMPTY.
-3-
L E C A C H E P R E M I U M W I N E C A B I N E T S
II. D E L I V E R Y O V E R V I E W
DELIVERY
If you purchased direct from Le Cache:
Standard delivery fees include 2 men (3 men for the Model 3800 and 5200), lift gateequipped truck, inside delivery to 1st floor or any floor accessible to an elevator (within 100
feet of truck), unpacking, debris removal, installation of the crown and base moldings
(shipped in a separate box – Euro and Mission Series cabinets) and door alignment with a
total site time not to exceed half an hour. Additional delivery fees may be required if you
are located outside a regular delivery service area, if additional men are required to safely
perform delivery services to your location, or if extra site time is required to provide these
services. Extraordinary delivery conditions – such as stairs, distance to truck greater than
100 feet, or difficult access – may also require additional delivery fees.
The specialized carrier has been instructed to perform the following tasks upon delivery of
your wine cabinet in your presence:
• Unpack the wine cabinet;
• Place the wine cabinet in your home in the desired location;
• Align the doors;
• Install crown and base moldings (European Country and Mission Series); and
• Dispose of the packaging materials if you desire
If you purchased from a dealer:
Shipping costs, freight carrier and class of service are determined by the dealer unless
otherwise specified.
Please note: the carrier is NOT required to install the door handles on your cabinet. The
handles are shipped in an envelope inside the wine cabinet or screwed to the back side of
the doors, and are easily installed with a screwdriver into predrilled holes.
-4-
Loading...