Vino Safe VSP WINE CELLAR Installation & Recommendation Manual

Installation guide VinoSafe VSP/ 460vspsav1ev8 / Page 1 out of 20

NVS S.A.S. - VinoSafe

2 Rue des Artisans

F-68280 SUNDHOFFEN
Tel. + 33 (0)3 89 71 45 35
Fax. + 33 (0)3 89 71 49 73

Email: [e-mail]

www.vinosafe.com

Reference:

460vspsav1ev8

Last update :

01/07/08

INSTALLATION & RECOMMENDATION GUIDE

VSP WINE CELLAR

PLEASE READ THESE INSTRUCTIONS BEFORE ASSEMBLING AND COMMISSIONING YOUR
WINE CELLAR. THEY INCLUDE NECESSARY INFORMATION FOR YOUR SAFETY, THE APPROPRIATE USE
AND MAINTENANCE OF YOUR CABINET.

WAIT FOR 48 HOURS BEFORE TURNING THE CABINET ON

A. THANKS…

The VinoSafe team thanks you for choosing a VSP wine cellar. We design and manufacture them in the French region
of Alsace in the same spirit as a wine grower who constantly tries to improve her/his wines quality. We hope you will
be fully satisfied. It is therefore mandatory for you to take some time to read this guide simultaneously with the
discovery of your cabinet look and features. Your wines deserve this as you invest time and money into them.

We thank you in advance to share with us all relevant remarks that will help us to improve our products and services.

B. ROLE OF YOUR VINOSAFE RESELLER

You will find hereunder the name and address of the company with whom you concluded this purchase. Your local
contact is the one who knows you best and who will be able to answer your first questions.

With 15 years experience in the wine cellar business, we have found out that 2 problems out of 3 can be solved
without any intervention of VinoSafe to replace some parts. This is why you will find in this guide a lot of explanations
and a list of questions and recommendations if you encounter a problem. If you do not solve the issue, please call you
reseller and call VinoSafe in case you are not getting the appropriate replies.

Don’t forget that a satisfied customer will always be a potential for positive recommendations to neighbours and
friends. It is VinoSafe’s interest to make sure you are not left without the appropriate support!

Your local reseller









Installation guide VinoSafe VSP/ 460vspsav1ev8 / Page 2 out of 20

C. DELIVERY, UNPACKING, STORAGE, REMOVAL CONDITIONS

You have acquired a refrigeration system that contains a gas in a closed circuit, and oil in the compressor. Your
product cannot be transported and stored in any position.

The air-conditioning system must never be put to bed. It has to be delivered inclined, then after out packing, it always
must remain standing (respect the same records at the time of a move)

Please check that the packaging is not damaged before you unpack. Damages to the outside packaging could be
significant of transport damages that could end up creating dysfunctions or outside defaults. Do not hesitate to make
comments on the delivery documents that you receive from the freight forwarder.

If you do not start using your VSE-CL immediately, leave it in its original packaging to protect it.

D. SAFETY RECOMMENDATIONS

 Use this appliance only for the purpose for which it is intended:

- Storing your wine at a temperature between 8° and 15°C.

Any other purpose may be dangerous and is forbidden. The manufacturer may not responsible if the appliance
is not used properly.

 An appliance that has been damaged (impact, flooding, fire, surges caused by lightning, etc…) may be

dangerous for your safety. If the appliance has suffered damage, unplug the appliance immediately or
disconnect the power supply and contact the manufacturer (see rating plate on the appliance).

 This appliance complies with current safety regulations. Maintenance work (such as electric connections) must

only be carried out by qualified engineers. Faulty connections or repairs that have not been carried out correctly
present a considerable danger for the user.

 Make sure that the voltage on your mains supply corresponds to the rating shown on the rating plate.
 This appliance may not be electrically safe if it is not connected to an effective earth lead. It is essential that

this basic safety measure is taken and, if there is any doubt, the domestic wiring installation should be checked
by a qualified electrician. The manufacturer shall not be held responsible for the consequences if the appliance
is not earthed or if the earth is faulty or incorrectly connected.

 For safety reasons do not use an extension lead.
 Disconnect the appliance from the power supply while undertaking maintenance work or cleaning (unplug the

appliance or open the circuit breaker).

 Do not allow young children to play with this appliance or to use it.
 Do not lean on the air-conditioning unit.
 If liquid accidentally runs into the air conditioning unit, (broken wine bottles, etc…), unplug the appliance

immediately or disconnect the mains supply and contact the manufacturer (see rating plate on the appliance).

 Make sure that appliances are rendered unusable when they are no longer in use. Unplug the appliance and cut

the cable. Then take the appliance to an approved refuse tip.

 Keep the manuals with your appliance for future reference.

Installation guide VinoSafe VSP/ 460vspsav1ev8 / Page 3 out of 20

E. CABINET IDENTIFICATION

The identification nameplate is located at the top/left of the rear of the cabinet.

WARNING: WHEN YOU NEED INFORMATION OR TECHNICAL ASSISTANCE, PLEASE ALWAYS SUPPLY THE MODEL,

TYPE AND SERIAL NUMBER LOCATED ON THIS VINOSAFE NAMEPLATE.

Installation guide VinoSafe VSP/ 460vspsav1ev8 / Page 4 out of 20

F. ASSEMBLY

F.1. ASSEMBLING THE WINE CELLAR

Use a metallic driller.

1. Principle

The insulating panels are assembled using hooks mounted on a rod.
These catches are operated using a right angled hex wrench.
In most cases, the hooks are engaged by turning the wrench fully
clockwise.
If the panels are incorrectly assembled or if you wish to dismount
the wine cellar, turn the wrench fully anti-clockwise before clamping
them again by turning clockwise.
Warning: The hooks which clamp the V.PM / V.PF / V.PR top
panels have to be turned in the opposite direction (anti-clockwise).

Warning :
Always start with rear left angle

Place the V.SM / V.SR / V.SF panels on the floor (flat surface).

NB: VSP 146 wine cellars do not have any V.PR panels.

Position the panels so that the tongue on each panel
slots into the groove on the adjacent panel.
Tighten the hooks fully (clockwise).

Installation guide VinoSafe VSP/ 460vspsav1ev8 / Page 5 out of 20

Warning :

Always start with rear left angle

(see draft)

Put the first corner panel (type V.A) in position.

Make sure that it is the right way up (the top is marked

HAUT).
Tighten the two bottom hooks (clockwise).

Fit the first side panel (type V.F).

Before tightening the V.F side panel to the V.A, corner
panel, make sure that the tops of the panels are well
aligned.

Tighten in the following order:

- the two side hooks,

- the two bottom hooks.

Continue assembling the other V.F side
panels as well as the V.A corner panels.
Always check that the tops of the panels are well
aligned.

Installation guide VinoSafe VSP/ 460vspsav1ev8 / Page 6 out of 20

Warning: Allow a space for fitting the V.P.C. door frame.
The doorframe can be fitted in place of any V.F side panel.

Always end with a V.A. corner panel.

To make it easier to fit the last V.A panel, lift it up, engage the
tongues into the grooves and slide it downwards.