Vimtag CM1 User Manual

Download

CM1 USER MANUAL

Cloud Camera

(HD Cloud Camera)

User Manual

MODEL: CM1

Note: To protect your privacy, please change the initial password after login.

Please keep your user name and password safely.

CM1 USER MANUAL

Contents

1. Introduction ..................................................................................................................... 1

2. Installation....................................................................................................................... 1

2.1. Camera installation and Login ............................................................................. 1

2.2. Wireless Installation Co nsiderations .............................. ..................... ................. 4

3. Homepage ......................... ..... ..... ... ..... ...... .. ...... ..... ... ..... ..... ... ..... ...... .. ...... ..... ... ..... ........ . 5

3.2 Camera status .......................................................... .. ............................................ 9

3.3 Account settings .............................................................. .. .................................. 10

3.4 Image settings and PTZ control .......................................................................... 11

3.5 Mode selections .................................................................................................. 12

3.6 Button page ......................................................................................................... 12

4. Information ............ ... .................................................................................................... 15

4.1 Alarm Information Checking .............................................................................. 15

5. Management ...................................................... ............................................................ 16

5.1 About................................................................................................................... 16

5.2 Nickname ..................................... ... .................................................................... 17

5.3 Admin Password ................................................................................................. 17

5.4 Guest Password ............................................ ... .................................................... 18

5.5 Network........................... .. .................................................................................. 19

5.6 OSD......................... ............................................................................................ 22

5.7 SD card: .............................................................................................................. 23

5.8 Camera alarm arming settings: ............................................................ ... ............ 25

5.9 Scheduled recording: .......................................................................................... 26

5.10 Date / Time: .. .................................................................................................... 27

5.11 System: .............................................................................................................. 28

5.12 Other: ................................................................................................................ 30

6. Troubleshooting .................................. ... ....................................................................... 31

7. Wireless Infrastructure .................................................................................................. 38

8. Wireless Security ................................................... ... .................................................... 39

9. Specifications ......................................... ....................................................................... 42

CM1 USER MANUAL

1. Introduction

Thanks for buying our products. Cloud IP camera has a variety of functions,

which dedicates to the office and home solutions. Unlike traditional IP Camera,

cloud camera uses P2P technology, plug and play (no need to do port forwarding,

DNS, or IP address setting). By using WIFI remote monitoring, Cloud Camera

realizes real-time control at any where and any time. 720P HD makes image

clear and smooth. Cloud IP camera also has motion detection function, making it

cost-effective for home and public places security.

This manual is only for reference, any update please open www.vimtag.com

to download newest manual version.

2. Installation

2.1.

Camera installation and Login

Step 1: Connect power and network

Please refer to "Quick Installation Guide” for installation

Step two: Login

1: Open www.vimtag.com

on browser, and put in camera ID and password (each

IPCAM have a unique ID number and password).

Note: To protect your privacy, please change the initial password after first time

CM1 USER MANUAL

Note: The user can click on the login screen of the "Register" button to register a

user account, login to add / manage multiple cameras.

2: On the video viewing screen.

Language

Registeratio

Enter the ID number or registered account

Password

ID login page

Download

CM1 USER MANUAL

3: Install the plug-in:

Note: If the image blurs when you watch, probably run the focal during

transportations or human factors of the camera lens, the focal length of the lens

caused by out of focus, the user can put the camera on the 3 meters for

Registered account login page

Play

Install video plug

Account settings

Real-time viedo

Live view shoot

Image playback shortcuts

CM1 USER MANUAL

reference, swing the camera lens back and forth a few times till the image in best

performance.

2.2. Wireless Installation Considerations

Wireless Camera promises you in the wireless network coverage area to use

wireless connection to access the network. However, the wireless signals need

to pass through walls, ceilings and other objects, thickness and location of limits

Wi-Fi range. The network ranges depending on your room or office types of

materials and radio frequency noise. Please follow these basic guidelines to

maximize wireless range:

1. Make sure the walls, ceilings between routers and your IP Cameras have

as fewer as you can, - each wall or ceiling can weaken adapter 3-90 feet (1-

30 meters) of the wireless transmission range.

2. Please pay attention to the straight-line distance between the devices. 1.5

feet thick (0.5 meters) of the wall at a 45degree appears to be almost 3 feet

(1 meter) thick. When turning to the 2degree, the thickness of the wall will

reach 42 feet (14 meters). Put the machine straight through a wall or ceiling

(instead of at an angle) for better reception.

3. Building Materials make a difference. Metal door or aluminum studs may

weaken the wireless signal. The access points, wireless routers and other

networking devices where the signal passes through drywall or not open

CM1 USER MANUAL

doorways. Materials and objects such as glass, steel, metal, band insulator,

water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade

your wireless signal.

4. Keep your product away from the electronic devices that generate RF noise

and appliances at least 3-6 feet or 1-2 meters from the outside position.

5. If you are using 2.4GHz cordless phones or other radio transmitting source

devices (such as microwave ovens), your wireless connection may degrade

dramatically or drop completely. Make sure your 2.4GHz phone base is as far

away from wireless devices. Even if the phone is not in use, the base will still

transmit signals.

3. Homepage

3.1 Add Camera Wizard

After registered users login, the user can add, delete and manage multiple cloud

cameras.

CM1 USER MANUAL

1. Add online cameras

2. Add Camera ID

CM1 USER MANUAL

3. Enter Cloud IP Cam password and click add device.

4. Enter Cloud IP Cam password and click revise button.

CM1 USER MANUAL

Attention: 1. the 4th step is based on the Cam’s initial password, if the initial

password is not “admin”, this step can be cancelled.

5. After choosing Wi-Fi, enter the password and click apply.

6. Add IP Cam Successfully.

CM1 USER MANUAL

2. The 5th step, after choosing Wi-Fi and enter password, when

applying, please check the STATE1 (

) light flashing status. Before pulling the

cable please make sure the STATE1 (

) flash 3 times for every 3 seconds.

3.2 Camera status

1. You can see the online status of every camera you added, which can be

divided into 3 statuses.

• Green color indicates that your camera is online.

• Yellow color means the camera online; however,

password has been changed. You need to

enter the new password to access the camera.

• Red indicates the camera is offline and not able to

access remotely.

If the camera is offline, please try the following methods:

• Make sure the camera's network connection is normal.

• Try to restart your network router.

• Please check the camera's cable connections to ensure they are connected.

• Make sure the camera STATE2 (

) the green light flashes every 3 times

every 3 seconds.

If you still can not access your camera, please restart the camera or press the

RESET shortly backing to the factory settings.

CM1 USER MANUAL

2. : Add or delete online cameras.

: Show or hide the status bar.

3.3 Account settings

1. Set video size: User can choose the resolution of the images.

2. Password: User can modify the admin account (The visitors login the account

by administrator password can modify the information of the account).

3. Guest Password: The visitors who login the account by guest password can

only watch and rotating screen, which can't modify the information of the

account.

4. Exit: Exit Video Interface.

CM1 USER MANUAL

3.4 Image settings and PTZ control

1. Brightness / Contrast / Saturation / Sharpness: video images can adjust the

parameters of the corresponding

(Such as the right to adjust these parameters will result in poor image quality

display we may not recommend users adjust of these parameters).

: Click "Reset", you can restore brightness / contrast / saturation / sharpness

back to the factory settings.

: IP CAM can control PTZ up / down / left / right rotation.

: Display and hide the status bar icons.

5. Machine Turnover: When the machine is hosting, the picture is turnover, when

choosing Machine Turnover, the picture will turn back.

6. Supply frequency: Please choose the right Supply frequency based on the

local area. (China rated frequency is 50Hz).

CM1 USER MANUAL

3.5 Mode selections

1. Automatically: Infrared lamp’s on and off is based on the environment around

the photosensitive sensor.

2. Daytime: IP camera is switch into daytime mode, infrared lamp is off.

3. Night: IP camera is switch into night mode, infrared lamp is on.

3.6 Button page

Video Play / Stop: Click buttons to play or stop the video.

Temporary manual recording button (the file recorded to micro SD card):

Click the buttons on the audio / video recording, recording icon indicates

.NOTE: This video button function applies only to temporary manually

recording.

CM1 USER MANUAL

3. Snapshot button: Click the button for playing video capture pictures.

Voice intercom: Click buttons, camera and computer microphone /

speakers are turned on; the two sides’ voices can be heard.

3.7. Playback

Micro SD card stores the video files.

1. Select the camera in the camera list.

2. In the image on the right can find more information. Video files and file details.

2. Video files and catalog

1. Camera

Play/Stop

CM1 USER MANUAL

4. Information

4.1 Alarm Information Checking

1. Information checking

2. Open the ima

3. Save as

CM1 USER MANUAL

5. Management

This section shows the configuration of the IP Cam.

5.1 About

Basic information about the camera is displayed.

Model: The camera version number.

Software Version: Camera current software version number.

Plug-in version: watch current video cameras plug-in version number.

Device ID: camera ID.

CM1 USER MANUAL

5.2 Nickname

Modify the current camera name.

Nickname: User can modify the name of the camera.

5.3 Admin Password

CM1 USER MANUAL

Admin Password: Enter the current login password (default password is admin).

New Password: Enter the new admin password.

(To protect your privacy, please change the initial password after logging. Please

keep the user name and password.)

New Password confirmation: Re-enter the current camera modified login

password.

Click "Apply" to save your changes.

5.4 Guest Password

Admin Password: Enter the administrator password of the current camera.

Guest Password: Enter guest password (Default password is admin).

New Password Confirmation: Re-enter the new guest password again.

Click "Apply" to save your changes.

CM1 USER MANUAL

5.5 Network

NIC: Ethernet (wired) or wireless networks.

1. Ethernet:

Effective when connected to a wired network.

Start Status: The current Ethernet situation is

enable or disable.

Mac Address: The current Ethernet Mac address.

Automatically obtain an IP address (cameras

default): When selected, the camera

Automatically get to the router connected to it is

automatically assigned to

Its associated IP address / gateway / subnet mask information.

CM1 USER MANUAL

Obtain DNS Service Address automatically: After clicking, IP Cam will

automatically obtain DNS by router.

By using DNS server address underneath: After clicking, the camera

will manually access with DNS connected to the Cam (user may not need to set

it).

2. Wireless Network: (wireless network configuration)

Select the wireless network card

after.

Wireless Mode: Hot / Terminal

A.Hot spots: As a searching

device, the default mode is

wireless hot spot. By using PC

or iPhone can search the hot

spot, IP cam hot spot is realize

as ID number. For example:

ipc1jfiegaaaah2a.

By connected with hot spot can realize the WIFI P2P connections.

A. Terminal: As an searched devices, can realize network

Camera connected with WIFI router.

Choose WI-FI

CM1 USER MANUAL

Note:

After setting up WIFI

click Applications,, WIFI

Surface does not

immediately refresh the

page information, the

user wants to quit

"Network", and then enter, you can see no

Line connection

status display: After a

successful connection,

Address and gateway

information will get to.

Meanwhile

STATE1

flashes

green 3 times every 3

seconds.

Choose Client

Choose router

CM1 USER MANUAL

5.6 OSD

Menu settings

CM1 USER MANUAL

Display text: After tickled, the upper left corner of the screen will display the

name of the camera. The user can modify the display name of the camera (Can

not have Chinese or symbols, only English and numbers).

Display date: After tickled, upper left corner of the screen will display the date.

Date format: The user can select Year / Month / Day or Month / Day / Year two

date formats.

Display time: After tickled, the screen will display the time.

Time format: User selectable for 24-hour or 12-hour format clock.

Display week: After tickled, the screen will display weeks.

Click “Apply” to save your changes.

5.7 SD card:

Display Camera SD card status.

CM1 USER MANUAL

Format: The Micro SD (T-FLASH) card is formatted; the existing micro SD card

contents will be cleared.

Repair: If "Playback" cannot see video file or view the alarm information, can

repair the micro SD card. (Note: The repair function may cause part of the micro

SD card contents lost)

Uninstall: put micro SD card from the camera release

Click Apply to save your changes.

CM1 USER MANUAL

5.8 Camera alarm arming settings:

I / O Alarm input: When normally open, alarm input port connect with an external

alarm sensor (such as door sensor, infrared, smoke alarm detector, etc.) must be

a normally open alarm probes. When alarm occurs, the probe switch is closed;

network cameras generate alarm triggers, alarm calls according to user settings.

I / O Alarm output: When normally open, alarm output port corresponding

external alarm devices (such as alarm loudspeakers, sound and light alarm

equipment, etc.) must be a normally open type, when an event has occurred, the

user sets the Alarm I / O port output , camera alarm output switch is closed,

trigger external alarm devices.

Sensitivity: To set the sensitivity of motion detection, the greater the value the

higher the sensitivity, relatively the probability of false alarms generated will be

Adjust the sensitivity

Apply

CM1 USER MANUAL

higher, generally we recommend user to choose the default values, the user also

can set up sensitivity based on their will.

5.9 Scheduled recording:

I/O on/off

Take photo

Pre - recorded time

Alarm on

Apply

Choose motion

CM1 USER MANUAL

In this option you can choose the 7* 24 hour video or scheduled recording.

Note: video files will be stored in SD card, when content is full, it will overridden.

5.10 Date / Time:

Time Server address: Users can manually enter in the online search to fill the

local country time zone server address (default time server address is China

time).

Sync data & time automatically: When Opening, the cam will automatically

synchronize the time displayed on the address bar time server address with

corresponding time.

Time zone: Users can choose the time zone of the camera.

CM1 USER MANUAL

Date: When “time server automatically" turned off, users can manually modify the

cam’s date.

Time: When "time server automatically" turned off, users can manually modify

the camera’s time.

Click “Apply” to save your changes.

5.11 System:

Online Upgrade: If you have the latest software, there will be tips <Update> click

update, the camera will be online software upgrade, after the upgrade is

successful will re-start the Camera.

CM1 USER MANUAL

Restore the factory settings: The user

can click the "Restore" button, will pop up

on the right

Diagram tips. When the "Save network

device" checked, the point is determined,

in addition to

Network setup parameters retained, the other parameters are restored to the

factory settings back;

When the "Save Network Device" is not checked, the point is determined, all

camera parameters

Few are restored to factory settings back, equivalent to click the RESET button.

Reboot: Click the reset button after the restart of the camera.

CM1 USER MANUAL

5.12 Other:

Audio:

Speaker: Set the size of the camera's speaker sound, use the mouse to drag the

slider to set, the greater the value, the greater the sound from the speaker.

Mac: Sets the camera microphone sensitivity, drag the slider with the mouse

settings, the greater the value, the more sensitive the microphone receiving

sound external environment more, the computer listens to the voice of the larger

end, the corresponding listening to ambient noise is greater.

Flip: To turn upside down.

Power Frequency: 50Hz and 60Hz with two frequencies selected the user

machine installation area under power frequency to choose.

Click Apply to save your changes.

CM1 USER MANUAL

6. Troubleshooting

This chapter provides solutions for questions or problems in camera installation

and operation.

If you encounter problems, please follow solutions below. (Below we take

Windows ® Vista ™ and XP as example. Different operation systems have the

similar operation.)

1). what is Remote Access? How to do that?

Remote access means that you can access a camera from a web on any PC

trough internet. So even if you are not at home, you can access a camera, view

live video and manage its settings.

How to do that? Please follow the Quick Installation Manual in the packing box.

If your camera does not work, please check whether the following things are

right.

....STATE2 (

) on the camera flashes green 3 times every 3 seconds

....Internet connection is working properly

... The router's LAN & WAN connection are working properly.

... Router UPNP and DHCP are on

... Routers can get a public IP.

... Router has been upgraded to the latest firmware version

CM1 USER MANUAL

... Restore your camera to factory settings by press “RESET” key one time on

camera bottom

... Disconnect router power supply and connect it again to restart

Try again to make your camera work after the above checking.

2). Why is network connection unstable?

Network cable may get a problem. You can PING the address of a existing

device in the same network. If network cable connects right and network connect

right, you should get a reply like bytes = 32 time = 2 ms.

Another possibility is that the network equipments like hubs and switches may

have problems. Ensure all network equipments connect and work well.

3). Why does the APP show camera not online?

This may be caused by firewall protection (such as MAC addresses filtering,

MAC address binding with the IP address). In this situation, please contact your

system administrator to check firewall. Firewall may need some configuration

changes. For more information, please refer to camera installation.

Ensure STATE1 (

) or STATE2 ( ) flashes 3 times every 3 seconds.

Router default settings may have a problem. Ensure router DHCP server is on.

If there are multi-level routers, each should connect the other trough WAN (for

example, the 1rs router LAN connects the 2

router LAN by a network cable). If

CM1 USER MANUAL

problem still exists, connect your camera with power, and then press “RESET”

key on the bottom to restore to factory settings.

4). Why are there vertical white lines in image?

CMOS sensor being exposed to strong light (such as direct exposure to sunlight

or halogen light) may cause this problem. CMOS sensor is behind the lens. It is

to measure the optical signal and converts it to a digital format, then the

computer will convert digital format to images to users. If the CMOS sensor has

been in high night for a long time remember not to move it to dark places for it

may damage the sensor.

5). Blur image. What to do?

When camera works in dark places, its image may get blur.

Or, your camera does not focus properly. Rotate the lens till you see a clear

image.

Web viewing on a computer may get a blur image. Because a computer has

much larger screen than a phone, and same resolution image will be amplified.

6). Image quality is poor, how to improve it?

Open www.vimtag.com

and login. Find image quality configuration to adjust the

parameters to improve image quality (e.g.: brightness, contrast, color saturation).

7). When I view on a web, there is no image. Why?

CM1 USER MANUAL

If you are using Internet Explorer, please make sure ActiveX is on. You may

need to modify the browser's security settings to allow ActiveX plug-in installed.

If you are using Internet Explorer versions earlier than 7.0, you need to upgrade

your Web browser.

8). Troubleshooting, LED status indication:

Indicator LED

status

Status Description Troubleshooting

POWER

(power

indicator)

Red light

Normally on

Power supply is

normal

If light is not lit, check the power

supply is damaged or the camera

hardware failure, requiring repair.

STATE1/STA1

(

)

(OFF

Wifi was disabled by

the user or wifi

hardware failure

1. Press RESET for 5 seconds to

restore the factory settings.

2.Make camera with wired Ethernet

connection, after landing, in the

"Manage" -> "Network" ,make WIFI

enabled;

3. Camera hardware failure, requiring

repair.

Red light

Normally on

WIFI router is trying

to connect

1. Verify WIFI router is good;

2. Try the camera placed from

somewhere near WIFI router and

then reconnect the power.

Restart WIFI routers and cameras;

Camera hardware failure, requiring

repair.

Red

Flashing 2

times

Is connected to the

router, is trying to

obtain an IP address

through DHCP

1. Please make sure your router's

DHCP server is enabled.

2. Try to restart the router.

Manually assign a WIFI router to

CM1 USER MANUAL

the same gateway IP address.

Red light

flashing 3

times

Ip address has been

obtained or the user

to configure a static ip

address, is trying to

communicate with the

gateway

1. Confirm the router is good.

2. Camera hardware failure, requiring

repair.

Green

light

Normally on

And gateway

communication is

normal, is trying to

communicate with the

internet

1. User can check whether the

network can access the Internet.

2. Check whether there are two

routers connected (first level router

network cable will need to receive a

second-class router's WAN port on

the job).

Try the camera placed from

somewhere near WIFI router and

then reconnect the power.

4. Check the router is turned on the

firewall to do MAC address filtering.

Green

flashing 2

times

Internet traffic is

normal, is trying to

communicate with the

cloud server

1. Restart the machine or the

machine on again to restart.

2. Try running the camera, based

on the press camera base

RESET button hole 6 seconds,

set the camera to restore the

factory tune.

Green

light

flashing 3

times

Normal

communication with

the cloud server, you

can access the

camera via cloud

Normal

CM1 USER MANUAL

services

Red \

green

lights

flashing

alternately

Wi-Fi for adhoc mode

(Wi-Fi did not

configure the router /

router connection

failed / DHCP fails to

enter this mode), you

can Wi-Fi terminal

(mobile phone / pad /

notebook computers)

connected to the

wireless network, and

then access the

camera through

192.168.188.254.

References Cloud Camera Quick

Installation Guide

STATE2/STA2

(

)

(OFF

Ethernet is disabled

by the user or the

network cable is not

connected or

Ethernet card

hardware failure

1. Users press RESET 5 seconds to

restore the factory settings.

2. Check \ replace the camera and

connect the network cable between

the routers.

Camera hardware failure, requiring

repair.

Red light

Network cable is

connected, the IP

address is obtained

1. Please make sure your routers

DHCP server is enabled.

2. Try to restart the router.

3. Manually assign a letter to the

Ethernet IP address of the router the

same gateway.

Flashing

red

IP address has been

obtained or the user

to configure a static

IP address, is trying

to communicate with

the gateway

1. Confirm whether the router is good.

Camera hardware failure, requiring

repair.

CM1 USER MANUAL

Green

light

And gateway

communication is

normal, is trying to

communicate with the

internet

1. The user to check whether the

network can access the Internet.

2. Check whether there are two

routers connected (first level router

network cable will need to receive a

second-class router's WAN port on

the job).

3. Check the router is turned on the

firewall to do MAC address filtering.

Green

flashing 2

times

Internet traffic is

normal, is trying to

communicate with the

cloud server

1. Restart the machine or the

machine on again to restart.

2. Try running the machine,

based on the press machine

base RESET button hole 6

seconds, set the machine to

restore the factory tune.

Green

light

flashing 3

times

Normal

communication with

the cloud server, you

can access the

camera via cloud

services

Normal

Red \

green

lights

flashing

alternately

DHCP fails, use a

temporary IP address

192.168.187.254,

Users can access the

same computer and

webcam LAN, set

different segments IP

(192.168.187.xxx),

and then access the

camera through

192.168.187.254

References << >> Cloud Camera

Quick Installation Guide.

CM1 USER MANUAL

7. Wireless Infrastructure

IP CAMERA wireless products are based on industry standards for your home,

business or public access wireless networks to provide easy and compatible

high-speed wireless connection. IP CAMERA strictly follows the IEEE standard.

Wireless LAN (WLAN) is network that transmits and receives data trough

wireless signal not electrical wiring. WLAN is increasingly used in home, office,

airport, coffee shop, and other public places. WLAN needs no electrical wiring or

other base equipments. It helps people to work and communicate easier and

more efficient with its mobility.

Tips:

When you use a wireless network, please note the following:

Put your router or access point at center area

Put the router / access point at the highest point of the room, so the signal

can be distributed to whole room space. If you have a two-story house, you

need to install a repeater to extend signal coverage.

Eliminate interference

CM1 USER MANUAL

Make sure home appliances such as cordless telephones, microwaves, and

televisions are far from the router / access point, which helps reduce

interface.

Safety

Prevent your next door neighbors or others connecting to your wireless network.

Open WPA or WEP in the router to protect your wireless network. Please refer to

the product manual for more information on this feature.

8. Wireless Security

This section introduces different levels of security to protect your data from

invasion.

IPCAM provides the following security types:

•

WPA-PSK (pre-shared key)

•

WEP (Wired Equivalent Privacy)

What is WEP?

CM1 USER MANUAL

WEP is Wired Equivalent Privacy. It is based on the IEEE 802.11 standard

and uses the RC4 encryption algorithm. WEP provides security by data

encryption on your wireless network, so that to ensure secure transitions from

one wireless device to the other.

To access a WEP network, you must know the key. Key is a code string. When

using WEP, you must specify the level of encryption. Type of encryption

determines the key length.128-bit encryption requires a longer key than 64-bit

encryption. Key id defined by HEX (16 hex -0-9, AF) or ASCII (American

Standard Code for Information Interchange - alphanumeric characters) format.

ASCII format allows you to enter a string that is easy to remember. ASCII is

converted into HEX when used on the internet. Four keys can be defined for

easy changing if needed.

What is WPA?

WPA or Wi-Fi Protected Access is a Wi-Fi standard, designed to improve WEP

(Wired Equivalent Privacy) security features.

There are two major improvements over WEP:

It improved data encryption through the Temporal Key Integrity

Protocol (TKIP). TKIP messes the keys using a hash algorithm, and

ensures that the keys are not changed by adding integrity-checking

CM1 USER MANUAL

feature. Based on 802.11i, WPA2 replaces TKIP with Advanced

Encryption Standard (AES) instead of TKIP.

User authentication through EAP gets missed in WEP.WEP is easily to be

sniffed or stolen for it accesses wireless network trough computer MAC

address. EAP is built on a more secure public key encryption system to

ensure that only authorized network users can access the network.

WPA-PSK/WPA2-PSK uses a pass phrase or key to authenticate your wireless

connection. Key is an alpha-numeric password between 8 and 63 characters

long. Password can include symbols and spaces. This key must be the same

with your wireless router key or access point key.

After camera installation as the Quick Installation guides, you can use the

assigned IP address of the camera. Because you share the same network with

one or more computers trough a router, the assigned IP address is a local

address. Then you can view your camera in local network.

CM1 USER MANUAL

9.Specifications

FCCStatement：

1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:

(1)Thisdevicemaynotcauseharmfulinterference.

and(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation.

2.Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment.

NOTE:

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB digitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidential installation.

Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmful interferencetoradiocommunications.However,thereisnoguaranteethat interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescause harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedby turningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe interferencebyoneormoreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna.

Increasetheseparationbetweentheequipmentandreceiver.

Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected.

Consultthedealeroranexperiencedradio/TVtechnicianforhelp.



FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that

may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Warning: The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter.

Vimtag CM1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual