Vimar 21554, by-me 21554 User Manual
User manual
21554
Video touch screen 4,3in Full Flat.
TABLE OF CONTENTS
1. The touch screen video ……………………………………………………………………………………… 1
2. Description ……………………………………………………………………………………………………… 2
3. Main menu ……………………………………………………………………………………………………… 2
Date and time …………………………………………………………………………………………………… 3
Display ……………………………………………………………………………………………………………… 4
Keys Tone …………………………………………………………………………………………………………… 4
Temperature Unit …………………………………………………………………………………………………… 4
Protection …………………………………………………………………………………………………………… 5
Video settings ……………………………………………………………………………………………………… 5
Temperature probe ………………………………………………………………………………………………… 6
Information …………………………………………………………………………………………………………… 6
4. Area management ……………………………………………………………………………………………… 7
4.1 Management monochrome and RGB lamps ……………………………………………………………… 9
4.2 HVAC Management ………………………………………………………………………………………… 12
5. Events Programs ……………………………………………………………………………………………… 15
6. Burglar alarm …………………………………………………………………………………………………… 19
7. Load control……………………………………………………………………………………………………… 22
8. Energy monitoring ……………………………………………………………………………………………… 24
8.1 Guide to navigating the screens …………………………………………………………………………… 24
8.2 Global consumption ………………………………………………………………………………………… 25
8.3 Energy consumption ……………………………………………………………………………………… 25
8.4 Energy flows ………………………………………………………………………………………………… 32
8.5 Single load consumption …………………………………………………………………………………… 34
8.6 Pulse counter ………………………………………………………………………………………………… 35
8.7 Settings ……………………………………………………………………………………………………… 37
9. Speaker System ………………………………………………………………………………………………… 45
9.1 Control for iPod, iPhone and auxiliary sources …………………………………………………………… 46
9.2 Control for RCA transmitter with IR interface …………………………………………………………… 50
10. Video door entry ……………………………………………………………………………………………… 51
11. Alarm clock …………………………………………………………………………………………………… 53
12. Screen saver …………………………………………………………………………………………………… 54
13. Cleaning of touch screen …………………………………………………………………………………… 54
14. Compliance with regulations ………………………………………………………………………………… 54
Table of Contents
1
Table of Contents
1. THE TOUCH SCREEN VIDEO
The 21554 is a touch screen device comprising a display through which, by the mere touch of the finger on the
icons displayed, you can select the home automation system management functions.
The device can also be used as a videophone and is provided with two front buttons that allow voice communication with the interlocutor and the opening of the gate electric.
: Hands-free answer button; press once to start the communication and press to end it.
: Lock command button; press to activate the electric lock that opens the gate.
IMPORTANT: When you enable it, start the video touch screen takes about 20 seconds.
2
Description - Main menù
2. DESCRIPTION.
The touch screen include control of lights (on/off/adjustment), shutters, thermostats (traditional and for fan-coil)
and scenes; control and monitoring of burglar alarm devices (specially through ‘Partialisation’ menu it is possible
to display the state of partialisations; automatic monitoring and control of power consumption of appliances (overload prevention).
The touch screen can also be used as a videophone and manages all functions of the two wire video entry (plaque
and display images from cameras, voice communication with the external, intercoms and call buttons, electric
opening, intercom call, etc. .).
3. MAIN MENU.
Touching the icon gives access to the Settings menu.
3
• Date and Time
By touching the icon it is possible to adjust the time and date displayed. With the icons
and set the blinking value until the desired day, month, year and time are shown.
The confirmation of transactions by touching .
4
• Display
When the icon is touched the display shows the screen that allows you to adjust the back-
lighting and the contrast of the display.
Main menù
This is set by holding your finger on the icons until and the desired level is reached.
LED Life Time: 20.000 hours (at 25 °C)
The LED life time define as the estimated time to 50% degradation of initial luminous.
• Keys Tone
With the icons and it is possible to enable or disable the acoustic signal(beep) which
accompanies the touching of the icons displayed by the touch screen.
• Temperature Unit
With the icons and it is possible to select the unit of measurement with which the touch
screen will display the temperature in the various areas of the system.
To confirm the settings made, touch the icon .
To return to the previous screen touch the icon .
5
Main menù
• Protection
With this option you set a password (from 4 to 6 digits) that inhibits displaying certain pages and therefore all the
controls associated with them. This application is useful, for example, to distinguish the use of the video touch
screen according to the current user.
Tap the icon and then the icon to display the page for setting the password (as shown on
the following page) and select the page to inhibit.
Tap the icon to edit a previously configured password.
• Video settings
Touching the screen appears that allows you to set the ring type to be combined with various types
of calls and adjust volume.
6
Main menù
• Information
When the icon is touched the display is shown which gives the software release and the main
characteristics of the touch screen.
• Temperature probe
By tapping the icon you can, by using and , compensate for the value of the
temperature measured by the external probe (where applicable).
7
Area management
4. AREA MANAGEMENT.
From the main menu, when the icon , is touched the display is shown which allows you to
select the different areas of the system and to control the devices associated with them (lights, roller shutters,
climate, etc.).
For example, when the icon is touched that corresponds to the area called “Lounge”, the touch screen
displays the following screen:
8
Area management
• Touching the icon switches on/off and adjusts the lighting called “Picture Light”.
• Touching the icon lifts and lowers the roller shutter called “Lounge left roller shutters”.
• Touching the icon gives access to the screen which allows you to adjust the temperature in the area
called “Lounge”.
• Touching the icon activates the scenario called “Entrance”; the same applies to all the other icons
associated with the different scenarios displayed.
• Touching the icons and scrolls through the whole screen for the groups and scenarios of the
selected area.
• Touching the icon gives access to the screens for all the other areas of the system.
• Touching the icon the screen that allows adjustment of the temperature of the environment called
"Living Room".
Touching the icon gives access to the screen for editing the automatic program.
Touching the , and , icons respectively increase and decrease the set
temperature and the speed of the fan-coil.
WARNING - Operation of the icons of activation of the scenarios:
• Short press: Activate the scenario.
• Long press (5 seconds): storage scenario (are stored and overwritten states of the groups involved in
the scenario being created).
Viewing the status of contact and relay interfaces.
If the rooms contain any contact interfaces used to control windows and/or doors and windows, the video touch
screen will enable monitoring their status.
For example, should a window have been left open, the icon for the contact interface associated with that window
will light up.
9
Area management
4.1 MANAGING MONOCHROMATIC AND RGB LAMPS.
This lights management mode, which can only be used if the By-me home automation system is equipped
with dimmers, dedicated lamps and ballasts, by switching on/off and controlling brightness, provides efficient
lighting in the rooms while ensuring optimization of energy savings.
The new RGB functions (patented by Vimar) enable creating colour changes and elegant, sophisticated light
effects. You can also call up scenarios involving different functions in the home automation system such as, for
example, combinations of lights and colours matched to your favourite music to create a personalized, comfortable environment.
Managing monochromatic lamps
The monochromatic lamps are managed in the same way as for traditional lighting.
Tapping the icon switches on/off and adjusts the illumination of the associated monochromatic
lamps.
Managing RGB lamps
The video touch screen enables managing switching on/off, adjusting/changing the hue, saturation, and brightness of the RGB lamps and it will also be possible to activate/change the Fading-Show application
Depending on the operating mode, the adjustment icon will be displayed as follows:
• Lamp ON.
In this case the degree of illumination is constant (no adjustment)
and the colour is fixed.
• Lamp OFF.
As above but with the lamp off.
10
Area management
- With and on Saturation you set the percentage of "vividness" of the colour.
- With and on Brightness you set the percentage of "contrast" of the colour.
- Tapping confirms the settings you have made.
• Tapping the icon opens the screen where you make the Fading-Show settings.
The function of Fading-Show allows to set a cyclical sequence of colors (up to a maximum of 6) for color
changes and the play of light in the environments where the lamps are installed RGB.
- With and on Persistance you set the time during which each of the colors remains fixed.
- With and on Transition you set the time that elapses between the passage of a gradual
color to the next.
- Tapping confirms the settings you have made.
- Tapping the icon associated with each of the colors that make up the sequence is going to change
the color characteristics of that color; in fact will see the following screen:
11
Area management
- With and you set the tone of color that will match the position of the cursor to the position
desired color.
- With and you set Saturation and Brightness.
- Tapping confirms the settings you have made.
- Tapping you remove the color selected by the sequence of Fading-Show and the screen will
become as follows:
- Tapping confirms the settings you have made.
- Tapping the icon to activate the sequence Fading-Show just set.
When the sequence is active and you fall into the menu Fading-Show, the screen becomes the following:
- Tapping the icon will stop the sequence of Faing-Show set.
12
4.2 HVAC MANAGEMENT.
With the touch screen it is possible to view the temperature measured by the various thermostats and to change
the typeof operation, the set temperature and the speed (from 1 to 3) of the fan coil.
Touching the icon displays the screen which allows you to set the operation (Manual, Automatic, etc.)
of the heating/air conditioning system for the area called “Lounge”.
Example for setting the Fading-Show with 4 colors.
- With the icon set the desired 4 colors; with remove the 2 colors that you want to include in the
sequence.
- With and set the Persistance and Transition (for example, 2 min and 15 s respectively).
- Tapping confirms the settings you have made.
- Tapping to activate the sequence Fading-Show just set.
In the case considered the color remains fixed for 2 minutes then if will start to change up to the next color within
15 seconds.
Area management
13
Area management
The icons are associated with the following modes of operation:
• = thermostat off.
• = thermostat off for a selectable number of hours (then it switches back on returning to the previous
operation).
• = the thermostat switches on in HEATING mode only if the ambient drops under the set antifreeze
temperature (e.g. 6°C).
• = manual temperature typically used at night (e.g. 15°C in winter).
• = as above, for a selectable number of hours (then it returns to the previous operation).
• = is the classic operation of traditional thermostats (the desired temperature is set manually with no
time limit).
• = as above, for a selectable number of hours (then it returns to the previous operation).
• = set the selected thermostat in SUMMER or WINTER mode respectively.
• = the weekly automatic program is activated.
As stated on the previous page, the touch screen enables changing the HVAC programs for automatic control of
the heating and air-conditioning previously configured on the control panel.
The personalization consists, for each day of the week, of setting the value of the temperature levels T1, T2 and
T3; in the heating and air-conditioning programs the values T1, T2 and T3 are differentiable.
Touching activates the automatic program; then touching brings up the screen for editing
the program.
14
Area management
• Touching and selects the time slot for changing the temperature level.
• Touching and selects the desired temperature level; the histogram will be updated.
The procedure must be repeated for all the time slots to be changed, then confirm with .
• To copy the setting of the level of a time slot to another one/others, touch the icon.
• Select another day of the week by touching and proceed as above; using it is possible to
assign the day displayed with the program of any other day of the week; select by touching the day to
copy from and confirm with .
• Touching displays the screen used to change the value of the temperature levels T1, T2 and T3.
15
Events Programs
5. EVENTS PROGRAMS.
From the main menu, touching the icon shows the screen that allows you to change the
automated functions previously configured on the control panel.
The Events Programs menu enables:
- stopping and restarting the selected event manually;
- changing the event on and/or off times.
• Touching stops the desired program and the icon is illuminated; to restart it simply touch the icon
again.
• Touching displays the screen that allows you to change the event on and/or off times.
The times can be changed according to the following time modes:
- Weekly clock;
- Period clock;
- Cyclical clock;
- Timing.
16
Weekly clock.
Enables, for every day of the week, setting activation of the event at intervals of 10 minutes (minimum time).
Touching and selects the desired range; the option activates the program for 10
minutes while deactivates it (the histogram will be updated).
The procedure must be repeated for all the ranges to be changed and lastly confirm with .
● To copy the setting of one range to another one/others, touch the icon.
• Select another day of the week by touching and proceed as above; using it is possible to
assign the day displayed with the weekly clock of any other day of the week; select the day to copy from with
and and confirm with .
Events Programs
Loading...