Vimar 21553.1 User Instructions

Multimedia video touch screen

User instructions

1

DISCLAIMER

Use of this device by any user, consumer or professional presupposes conscious acknowledgement and full
acceptance of this Disclaimer.
It remains understood that use of the device is to be considered as acceptance of the contents of this Disclaimer,
it nevertheless being understood that VIMAR shall at any time be able to completely or partially change and/or
update this device, or the conditions of its use.

1. Ownership of the device, content rights, limitations and prohibitions on use, Copyright.

The copyright on the device is owned by VIMAR S.p.A. Viale Vicenza 14, Marostica (VI).

The trademarks and distinctive marks published on the device are the property of VIMAR S.p.A. , or of third
parties and, in any case, access to the device does not give the right to use such trademarks and distinctive
marks without the written authorization of their respective owners.

Any registered trademark, service mark, collective mark, design right, image right, privacy right or similar
rights, mentioned or used in the device, are the property of their legitimate owners.

All the material available through this device is protected by the rights of intellectual property, in conformity
with the current regulations on the protection of the applicable copyright.

Access to the device does not provide any right to take possession of it, nor copy, change, distribute or
re-publish any part of the information it contains in any form or with any instrument, without the express
written authorization of VIMAR S.p.A. and / or of the third party owner of the relevant rights for its use and/
or reproduction.

2. Exemption from responsibility.

VIMAR S.p.A.:

• shall not be held responsible for consequences that may be caused to Users or third parties by possible
malfunctioning of the device and for any damage of any nature that Users may meet with, including any
failures, malfunctioning, breaks in the availability or operation of the device and/or its functions;

• by way of example and not peremptorily VIMAR S.p.A. shall moreover not be held responsible for any
loss of earnings caused by using the information contained in the device, loss of data or work stoppages
deriving directly or indirectly from use of the device;

The user acknowledges VIMAR S.p.A. the right to stop the supply at any moment, whether temporarily or
definitively, completely or partially, of some applications equipping the device owned by third parties (Web
Radio), relieving it from all responsibility.

VIMAR shall not be held responsible for the lawfulness, truthfulness or exactness or accuracy of the informa­tion provided by the applications equipping the device and owned by third parties.

The above limitations /exclusions of responsibility do not have the purpose of limiting / excluding the
responsibility of the Company in cases in which it cannot be excluded or limited in accordance with the
applicable national law.

2

3. Privacy.

For whatever is not contemplated, any treatment and/or filing (unless in an "aggregate" form and for "statisti­cal purposes") of the data passing through the software platform, VIMAR S.p.A. with the application of every
precaution as required by Italian Legislative Decree D.lgs no. 196/2003 will receive and receives express
authorization to treat it in any way, within the limits of that which is strictly necessary for the purposes of
performing the described services.

The software platform collects some service information from the device that is necessary for providing the
services concerning the registered devices, the version of the application and of the services it provides, as
well as signals for checking correct access and operation of said services. The above information is all neces­sary and functional in order to enable correctly performing the functions of remote control of the applications
and devices supported by the platform.

It is therefore necessary to grant specific approval and authorization for each above-mentioned treatment,
within the limits of that which is strictly necessary for providing the associated service.

3

Table of Contents

1. Description ………………………………………………………………………………………………………… 5

1.1 Main characteristics …………………………………………………………………………………………… 5

2. Main menu ………………………………………………………………………………………………………… 6

2.1 Notices ………………………………………………………………………………………………………… 7

2.2 Context menu …………………………………………………………………………………………………… 8

3. Settings ……………………………………………………………………………………………………………… 10

3.1 General ………………………………………………………………………………………………………… 10

3.2 Vimar Web Server IP network ………………………………………………………………………………… 15

3.3 Video door entry system ……………………………………………………………………………………… 15

3.4 User management ……………………………………………………………………………………………… 18

3.5 Updating ………………………………………………………………………………………………………… 23

4.

Using files from removable media ……………………………………………………………………………… 24

5. Home automation system ……………………………………………………………………………………… 24

6. Video door entry unit ……………………………………………………………………………………………… 25

6.1 Video door entry unit with no active calls …………………………………………………………………… 25

6.2 Video door entry unit with call in progress …………………………………………………………………… 26

6.3 VOIP …………………………………………………………………………………………………………… 29

7. Video cameras …………………………………………………………………………………………………… 31

7.1 Viewing the video camera list ………………………………………………………………………………… 31

7.2 Cyclical viewing of video cameras …………………………………………………………………………… 32

8. Blackboard ………………………………………………………………………………………………………… 34

9. Photo/Video ………………………………………………………………………………………………………… 38

10. Web Radio ………………………………………………………………………………………………………… 39

11. Music ……………………………………………………………………………………………………………… 41

12. Weather …………………………………………………………………………………………………………… 43

13. Feed Reader ……………………………………………………………………………………………………… 46

14. Calcolatrice ……………………………………………………………………………………………………… 48

15. Calendar …………………………………………………………………………………………………………… 49

16. Cleaning the multimedia video touch screen ……………………………………………………………… 49

17. Compliance with regulations …………………………………………………………………………………… 49

4

5

1. DESCRIPTION

In a By-me automation system in which the web server is installed, the multimedia video touch screen enables
complete control of lights, roller shutters, HVAC, speaker system, scenarios, event programs, load control, power
consumption management (Energy Guard) and intrusion detection alarm system. The multimedia video touch
screen can moreover be used as a video door entry unit and it manages all the functions of the Due Fili (Two Wire)
video door entry system (displays images from panel and from video cameras, voice communication with speech
unit, audio door entry units and call buttons, opening electrical lock, etc.). The device also lets you access certain
information over the Internet via dedicated applications (weather forecasts, news, RSS feed readers, web radio),
view video or photographs, listen to music (mp3 files), write notes and link them to an acoustic alarm signal (date
and time) and create text or graphic notes with real drawings thanks to the "blackboard" function.

1.1 Main characteristics.

Description

Display

CBA

A: SDHC port
B: ON/OFF button
C: USB port

ON/OFF button:

• ON: with the device switched off, press once to turn on the video touch screen.

• With the device switched on, press once to display the context menu.

• OFF: with the device switched on, press and hold for approximately 8 s until the video touch screen displays
the off icon.

Video backlighting lifetime: 10,000 hours (at 25°C)
The lifetime is defined as the estimated time for the brightness to fall to 50% of the initial value.

6

Main Menu

2. MAIN MENU

To display all the other icons, scroll horizontally with your finger over the area covering them.

7

Main Menu

2.1 Notices.

In case of special settings or events (for example video door entry call, alarm silencing, etc.) the multimedia video
touch screen will display the following warnings:

-

: User away or advanced video door entry answering machine function activated

- : Ringtone off

- : "Door open" indicator

- : SD card not inserted

- : SD card inserted 51-75%

- : SD card inserted 76-100%

- : Indicator for "lost call" (video door entry system) and "new note" (blackboard)

At the bottom of the touch screen multimedia video device are three RGB LEDs which light up to provide a further
indication of missed calls and new notes written on the blackboard.

Depending on the notification, the message will be as follows:

- 1 red flash every 5 s for a call recorded on the answering machine;

- 1 yellow flash every 5 s for a new note added to the blackboard.

The LEDs remain off if there are no notifications.

8

2.2 Context menu

When accessing each of the menus contained in the main one, it is possible to view a context menu used to carry
out some quick operations for managing the multimedia video touch screen.

The context menu is displayed by pressing the ON/OFF button once (button B illustrated one page 5).

More specifically:

- Tapping

displays the Main menu sending the current application, when applicable, to the back.

- Touching displays the options relating to the current menu (tool bars, etc.).

- Tapping

takes you back and closes the current application.

- Touching closes the context menu

- Touching the cursor of the scroll bar (moving it to the left or right) increases/decreases the volume of the audio
outputs (the level is highlighted by the illumination of the bar).

Main Menu

9

Main Menu

As illustrated on page 4, from the main menu you access all the management menus of the multimedia video touch
screen relating both to its own functions and to those of the home automation system to monitor.

The following chapters describe all the main screens of these menus; note that on touching the
icon you always go back to view the main menu.

10

3. SETTINGS

From the main menu, touching the icon takes you to the Settings menu.

3.1 General.

Touching the icon displays the following options:

- System info;

- Date and Time;

- Language and Unit of Measurement;

- Energy Saving.

Settings

11

Settings

• System info

Touching the icon displays the software release and the main features of the multimedia video

touch screen.

• Date and Time

By touching the icon it is possible to adjust the time and date displayed.

By touching the relevant icons it will be possible to select Automatic or Manual mode, viewing the time in AM/PM
or 24h mode, the time zone and set the current date.

12

Automatic:

Manual:

Settings

13

Settings

• Language and Unit of Measurement

By touching the icon it is possible to select the language in which all the words will be

displayed and the unit of measurement with which the multimedia video touch screen will display the temperature
of the various system environments.

Touch the drop-down menu on "Language" and select the desired one.

Touch the icon corresponding to the unit of measurement for the temperature in °C or °F; the set unit of measure­ment will then be used in the Weather application.

14

Settings

• Energy Saving

Touching the icon takes you to the screen for setting the notifications, screen saver and

brightness settings for the multimedia video touch screen.

By tapping the dedicated icons you can activate switching off the display and the screen saver, setting its type

and its time out.

- enables selecting a picture folder on the SD card;

- enables selecting a video on the SD card;

- enables viewing the current day, date and time.

The drop-down menu is used to set the time-out at the end of which the screen saver will be started.

The drop-down menu alongside the "monitor switch-off timer" icon is used to set the time-out at the end
of which the display will switch off.

The screen also has two controls for adjusting the brightness of the display during normal use and in screen saver
status.

15

Settings

3.2 Vimar Web Server IP network

This menu is used to carry out all the operations of configuring the IP network and the Vimar Web Server. These
operations are solely for the installer.

3.3 Video door entry system.

This menu is used to carry out all the configuration operations of the multimedia video touch screen for managing
the video door entry system. These operations are solely for the installer.

The user can set different ringtones according to the type of call so as to identify it based on the associated
acoustic signal.

Touching the icon and subsequently the icon brings up the screen that enables setting

the ringtone to associate with the types of call.

Touching the icon on the ringtone to set, opens a menu with a list of available ringtones.

16

Touching:

- takes you to the audio folder that may be on the SD card or on the USB stick to link mp3 files

to each type of call;

- stops the selection;

- confirms the settings made.

To adjust the volume of all the ringtones, touch the cursor of the scroll bar and move it to the left or to the right
according to the desired level (this level is highlighted by the illumination of the bar).

Settings

17

Settings

Video door entry system answering machine.

This option is used to define the timeout after which the unanswered call is considered "missed" and the caller's video,
recorded in the first 10 seconds after pressing the doorbell, is saved. At the same time the notification is displayed in the
Main menu and, if enabled, the LED notification is also activated when there are one or more missed calls.

• In the main window touch the icon and then the icon.

Set the answer time by entering a value in the shown range.

Saving missed calls is managed as follows:

- If the device has an SD card with free space, the calls are saved in sequence with a numerical limit set only by
the available space on the SD Card (consider that every missed call occupies approximately 5 MB of memory);

- If no SD card is inserted in the device, only the last missed call will always be saved in the local memory and will
overwrite the previous one.

• Advanced video door entry system answering machine

The setup screen of the video door entry answering machine also features controls for recording a voice message to be
played when an external call is received. This function is called the "Advanced video door entry answering machine".
The caller can thus listen to this message after ringing the bell and in her turn leave a video message with sound
for a maximum duration of 20 s.

The "Advanced video door entry answering machine" function is active when the audio door entry answering
machine is switched on (ON) and in the main menu of the “Video door entry unit” application the “User away”
status has been set.

N.B. Since the advanced video door entry answering machine entails the caller recording a video mes­sage, it is necessary to fulfil the obligations in compliance with the current privacy and installation regula­tions in the countries where the product is installed.

18

3.4 User Management.

This menu is used to make the settings that enable differentiating the use of the multimedia video touch screen
according to the type of user.

Touching the icon brings up the screen that enables creating different types of user with which

different privileges are associated.

Creating users and assigning privileges can be done only by the Administrator.

Touching the icon brings up the screen that enables creating new users and editing ones already config-

ured.

Before displaying the screen for user management, the multimedia video touch screen requests authentication by
the administrator by entering name and password.

The default passwords, namely the ones to use when first switching on (that will then be subsequently able to be
changed), are the following:

- Administrator password: admin

- Installer password: inst

When creating a new user, the password that by default is assigned to this user is the name of the user.
For example: a user called Mario is created; the password assigned by default will be Mario.

Touching the icon confirms the entered password.

Settings

19

Settings

Touching:

- changes the settings for already configured users;

- deletes the selected user;

- adds a new user.

Touching the icon displays the Settings menu.

Touching the icon displays the screen that enables managing the three types of user:

- Administrator;

- Installer;

- User.

The table shown on the page alongside illustrates the three types of user and the functions associated with
them; in the phase of creating users then, it will suffice to link to each one of these the privileges that you want
to assign.

20

Settings

MENU ADMINISTRATOR INSTALLER

STANDARD

USER

GENERAL

  

System info

  

Date and Time



Language and Unit of Measure­ment



Energy Saving



Line Out



Save-Restore Configuration



Log



VIMAR WEB SERVER IP NETWORK



IP Network Parameters configuration



Vimar Web Server configuration



VIDEO DOOR ENTRY

 

Installation



Ringtones

 

Accessory Functions



video cameras



Intercom



Door Opening



Video door entry system answer­ing machine

 

USER MANAGEMENT



Users



Groups



Permissions



UPDATING



Operating System



Applications



21

Settings

MENU ADMINISTRATOR INSTALLER

STANDARD

USER

PERMISSION MANAGEMENT
(DEFAULT)

(not modifiable)  

Access to Home Automation
System Application

(not modifiable)  

Access to Photo-Video Applica­tion

(not modifiable)  

Access to Music Application

(not modifiable)  

Access to Web Radio Application

(not modifiable)  

Access to Calendar Application

(not modifiable)  

Access to Blackboard Application

(not modifiable)  

Access to Weather Application

(not modifiable)  

Access to News Application

(not modifiable)  

Access to Feed Reader Applica­tion

(not modifiable)  

Added and change Blackboard
messages

(not modifiable) 

Added and change Feed

(not modifiable) 

Added and change News

(not modifiable) 

Added and change Weather
location

(not modifiable) 

Video camera self-start

(not modifiable) 

Display missed calls

(not modifiable) 

22

Settings

Touching:

- changes the settings for already configured groups;

- deletes the selected group;

- adds a new group.

23

Settings

Touching the icon shows the screen that enables assigning users with the menus and applica-

tions they can access.

Touching the icon for the user and the desired application enables this user to utilize the

selected function.

3.5 Updating.

When a new software update is available, the multimedia video touch screen will display the message: "Vimar
application updates are available. Log in as an administrator or contact your installer to perform the instal­lation”.

This message will also be seen by the basic user, but the update can only be performed after identification as
"Administrator" or "Installer".

24

Using files from removable media - Home automation

4. USING FILES FROM REMOVABLE MEDIA.

Some applications let you take files directly from the SD Card or from a USB pen drive.
If you need to explore one of these media, the system will display a file explorer that will perform this function.

The explorer will be used:

- to manage the screen saver and select the folder with the images or video;

- when asked to restore or save;

- to update the Multimedia Video Touch screen when updating via the remote server will not be possible;

- to load MP3 ringtones.

5. HOME AUTOMATION.

From the main menu, tapping the icon takes you to the Home Automation System menu displaying the

screens for managing returns available via Vimar Web Server.

For all the details concerning automation system and intrusion detection alarm system management via the mul­timedia video touch screen please refer to the Vimar web server user manual.

25

Video door entry unit

6. VIDEO DOOR ENTRY UNIT.

From the main menu, touching the icon takes you to the Video Door Entry Unit menu.

With this menu it will be possible to view and communicate with the person that made the call and open the elec­trical lock, switch on the stair lights, make intercom calls with other video door entry units and audio door entry
units, activate self-starts for environmental monitoring, etc.

6.1 Video door entry unit with no active calls

If no calls have arrived the multimedia video touch screen will show a window more or less similar to the one below.

• Touching the icon opens the electrical lock of the door or gate.

• Touching the icon disables the internal ringtone and the title bar shows the "ringtone disabled" icon.

• Touching the icon disables the "User away" function and the title bar shows the "User away" icon.

The advanced video door entry answering machine can be activated in "User Away" mode (if previously enabled

in the settings).

Finally, at bottom right there are the following icons:

- to view the icons associated with the intercom calls configured in the system.

26

- to cyclically view the images transmitted from the video cameras (each touch changes video camera).

- to view a list of configured video cameras.

6.2 Video door entry unit with call in progress.

When a call is made from a speech unit (external panel, call button, etc.), the multimedia video touch screen emits
an audible warning and, if there is also a video signal, the display lights up to display the person calling.

• To answer the call and communicate with the person calling it is sufficient to touch the icon; touching
the icon again cuts off the audio ("mute" mode)

• To break off the communication touch the icon;

• To adjust the volume of the audio communication, touch the cursor of the scroll bar and move it to the left or to
the right according to the desired level (this level is highlighted by the illumination of the bar).

Video door entry unit

27

• Touching the icon opens the electrical lock of the door or gate.

• Touching the icon activates the associated command (for example the stairs light is turned on).

• If there is more than one icon (for example for controlling lights), touching expands the screen and

displays all the other icons associated with the controls.

Video door entry unit

28

Video door entry unit

Touching the icon displays the corresponding message.

Finally, the icon enables deleting the corresponding message.

The recorded messages are saved to the SD card (if there is one and if this function has been set).

Without an SD card, the multimedia video touch screen enables recording a single video door entry message that
is then overwritten by the next one.

• Touching the icon shows the screen with any messages recorded by the video door entry system

answering machine.

29

Video door entry unit

6.3 VOIP Functionality

VOIP functionality lets you use your mobile device to forward the video door entry system functions of your Due
fili system.

By-door APP

This application lets you transfer an audio/video call from the entrance panel to a mobile device, tablet or smart­phone connected via Wi-Fi to the local network in which there are the Multimedia video touchscreen and the
By-me Web Server. The application also enables auto-starting any Due Fili or IP cameras connected to the video
door entry system and controlling any auxiliary functions that are already configured in it.

Using this application requires:

• the system to have a Multimedia video touchscreen (art. 21553.1) and the By-me Web Server (art. 01945, with
serial number higher than 14-0001);

• the firmware and APP upgrades for the same items, whose latest versions are available both in the multimedia
product catalogue and in the Product Software section of the website www.vimar.com.

The APP (in Italian and English) is available for iOS and Android via a free download from iTunes or Google Play,
which can be reached from the Mobile Applications section of the Vimar website.

Main APP information

The following screen shows the menus and functions you can use via the APP.

The menu lets you navigate through the following functions:

• entrance panels ;

• cameras ;

• auxiliary/custom controls ;

• settings .

Each entrance panel can be paired with a representative image that can be taken from the gallery or obtained by
taking a photo with the entrance panel camera.

30

Video door entry unit

The commands available on this screen enable controlling door opening, entrance panel auto-starting, activating
audio communications and switching on the lights (if present and configured in the system).
In the case of an entrance panel call, a notification is displayed in the bar at the top; selecting this notification forces
loading the application in the background and shows the picture of the panel in the call.
Another pop-up allows the user to accept or refuse the call.

Each camera can be paired with a representative image that can be taken from the gallery or obtained by taking a
photo with the camera itself. Also, if there are multiple cameras in the system, you can activate a sequential display
of these cameras, setting the desired duration time.

You can pair any name you want with the custom commands menu. The functions configured in the Multimedia
video touchscreen that belong to the functions of the Due fili system can be added to the group.

31

Video cameras

7. VIDEO CAMERAS.

From the main menu, touch the icon (where present) to access the Video cameras menu.

This menu can be used to view the images transmitted by all cameras integrated into the home automation system
(video door entry system, external video cameras, IP video cameras, etc.).

7.1 Viewing the video camera list.

• Touch the icon to view the list of all video cameras in the home automation system.

• Touch the icon associated with the desired video camera (for example, ) to view the corresponding

images.

32

Video cameras

• Touch the icon to view the previous video camera (in list order), or touch to view the

next video camera.

• To adjust the audio volume of the camera (when the camera makes it available), touch the cursor of the scroll
bar and move it to the left or to the right according to the required level (this level is highlighted by the illumination
of the bar).

• Touch the icon to view the list of video cameras again (see figure opposite).

7.2 Cyclical viewing of video cameras.

• Touch the icon to automatically display (in list order) all video cameras within the home automation

system.

The images from each video camera will be displayed for a set period of time, after which the system automatically
moves on to the next video camera.
Once the last camera in the list has been shown, the display will begin again from the beginning.

33

Video cameras

• To adjust the period of time after which the display moves on to the next video camera, touch the cursor scroll
bar cursor and move it to the desired duration (in seconds).
The viewing time is also shown through the illumination of the bar.

• To adjust the audio volume of the selected video camera, touch the scroll bar cursor and move it to the left or to
the right depending on the desired level (this level is highlighted by the illumination of the bar).

• Touch the icon to view the list of video cameras again (see figure on page 28).

34

Blackboard

8. BLACKBOARD

The "Blackboard" application enables writing notes, recording audio messages, or making graphic notes with
actual drawings.

From the main menu, touching the icon takes you to the Blackboard menu.

The Blackboard window, on the left, will show a list of the existing messages marked by a ball that indicates the
type of note and whether the note has been read or not (yellow/grey in colour).

Touching the icon deletes the corresponding note (the icon only appears in the phase of creating the note).

Touching the icon creates a new note (which must be assigned a name) defining the following options

associated with it:

- Audio (recording of a voice message); touch the icon.

- Text (writing a text message); touch the icon.

- Graphics (doing the graphics of a drawing); touch the icon.

35

Blackboard

• Audio

.

Touch the icons:

- to start recording the message (maximum length 2 minutes);

- to listen to the recorded message;

- to temporarily stop recording/listening to the message;

- to end recording/listening to the message.

- to save the recorded message.

36

Blackboard

• Text

.

With the icons it will be possible to choose the type of font and the

body of the character with which to write the text message.

Touching the icon creates a new note.

Touching the icon saves the note.

Touching the icon manages the notes shown in the list on the left (move, delete and edit).

37

Blackboard

• Graphics

.

With the icons it will be possible to choose the type and the

thickness of the stroke, its colour and if necessary an eraser to delete what has been drawn.

After choosing the stroke and colour you do the drawing on the display using the finger of a hand.

Touching the icon creates a new note.

Touching the icon saves the note.

Touching the icon manages the notes shown in the list on the left (move, delete and edit).

38

Photo/Video

9. PHOTO/VIDEO.

This menu enables loading and viewing images and video on the multimedia video touch screen.

From the main menu, touching the icon takes you to the Photo/Video application.

N.B. The above images are merely explanatory as the display depends on what the user loads on the SD Card
and/or USB pen drive.

39

Web Radio

10. WEB RADIO.

This menu is used to find, select and save the desired radio station (web radios all over the world) on the multi­media video touch screen.

On starting the application will display the various categories of radios on the network; to find a specific station
use the "Find" icon.

After finding the desired radio station simply touch it to start it playing.
To add the radio to your favourites touch the heart-shaped icon (see page 87).

From the main menu, touching the icon takes you to the Web Radio menu.

40

Web Radio

41

Music

11. MUSIC.

This menu is used for loading and listening to audio files on the multimedia video touch screen.

From the main menu, touching the icon takes you to the Music menu.

42

Music

43

Weather

12. WEATHER.

This menu can be used to consult the web page providing weather forecasts for all cities throughout the world,
in particular:

- Current conditions, updated every 3 hours

- 10-day weather forecast

- Forecast updated every 3 hours for each of the 10 days in the above category

From the main menu, touch the icon to access the Weather menu.

• Touch the icon for the desired city to view the corresponding weather forecasts (current day, next 10 days and

a detailed breakdown).

• Touch the icon corresponding to the desired day (for example, ) to view the relative forecasts (weather,

temperature, wind speed, humidity, etc.).

44

Weather

• Touch the icon to view the weather forecast in intervals of 3 hours for the selected day.

45

Weather

• Touch the icon to manage your favourites (move or delete).

• Touch the icon to add a new town to the list of favourites shown on the left.

46

Feed Reader

13. FEED READER.

The Feed Reader enables collecting web updates (such as newsletters) like news headlines, blogs and podcasts
to which you have subscribed, in a single place so as to make reading easier.
The Feed Reader reduces the time and the operations necessary to regularly follow website updates and enable
creating a single place for information (basically "personal news").
After subscribing to a Feed, an aggregator is able to monitor new content at the frequency defined by the user
and retrieve the update.

From the main menu, touching the icon takes you to the Feed Reader.

• Touching the icon updates the Feed.

• Touching the icon displays your list of Feeds.

• Touching the icon manages the Feeds in the list (move, delete and edit the URL of the Feed).

• Touching the icon adds a new Feed to the list shown on the left.

47

Feed Reader

48

Calculator

14. CALCULATOR.

From the main menu, touch the icon to view the calculator, which can be used in traditional or scientific
mode.

49

Calendar

15. CALENDAR.

This menu enables viewing the current calendar setting various view modes (monthly, weekly, etc.)

From the main menu, touching the icon takes you to the Calendar.

16. CLEANING THE MULTIMEDIA VIDEO TOUCH SCREEN.

Periodically clean the multimedia video touch screen with a soft, dry cloth. Do not use any solvents or detergents.

17. REGULATORY COMPLIANCE.

LV directive
EMC directive
Standards EN 60950-1, EN 61000-6-1, EN 61000-6-3.

Touch the desired day to view/edit/add any notes, memos, etc. distributed over a 24 h period.

21553.1 EN utente 04 1601
VIMAR - Marostica - Italy

Viale Vicenza, 14 - 36063 Marostica VI - Italy
Tel. [phone] - Fax (Italia) [phone]
Fax (Export) [phone]
www.vimar.com