VILLBAU VBIP-G, VBIP-3G, VBIP-4G Installer Manual
VBIP-G
Mobile Communicators
GPRS (2G), WCDMA (3G), LTE (4G)
Installer Manual
Rev. 2018.08.14.
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY
(in accordance with 93/68/EEC)
(in accordance with 93/68/EEC)
We, VILLBAU Security Systems Ltd. (1182 Budapest, Üllői út 611., HUNGARY) declare, that the
following products:
VBIP-G GPRS/GSM communicator
VBIP-3G HSPA/UMTS communicator
VBIP-4G LTE communicator
are in conformity with the following EU directives:
2014/30/EU Electromagnetic Compatibility
2014/53/EU Radio Equipment Directive
2011/65/EU RoHS2 Directive
The products named above comply with the requirements of these EU Directives by meeting the
following standards:
EN 55011:2009+A1:2012 RF Emission Standard
EN 50130-4:2011 Electromagnetic Immunity
EN 50130-5:ed.2 Environmental Class II
EN 50131-1:2006+A1:2008 Intrusion Systems
EN 50131-3:2009 System Security Grade 3
EN 50136-1:2012 Alarm Transmission Systems, SP5, DP4
We hereby declare that the products named above has been designed to comply with the relevant
sections of the above referenced standards and specifications. The units comply with all essential
requirements of the directives when installed and used as per manufacturer's instructions. This
declaration is based on the following reports:
Organization: Abegu a.s., L1184
Report Nr. P/18/01/51 EMC
Organization: TESTALARM Praha Ltd.
Report Nr. 6345 9354, TAP-24/2018
The technical documentation supporting this declaration is available at the above address for inspection
by the relevant authorities. The products are marked with the CE mark.
In case of any change made to the instruments without the written permission of VILLBAU Security
Systems, including any hardware or software changes, or the improper use of the instruments, this
declaration should be considered void.
Budapest, 14th August 2018.
……………………………………….
Vass József
a VILLBAU Kft. képviseletében
TABLE OF CONTENTS
DECLARATION OF CONFORMITY....................................................................................................................3
1. INTRODUCTION................................................................................................................................................5
2. SYSTEM OVERVIEW..........................................................................................................................................5
3. OVERVIEW............................................................................................................................................................6
4. LED INDICATORS...............................................................................................................................................7
5. GENERAL RECOMMENDATIONS................................................................................................................. 9
6. PROGRAMMING THE COMMUNICATOR WITH PC...........................................................................12
7. TROUBLESHOOTING.....................................................................................................................................14
8. TESTING AMS SERVER CONNECTION....................................................................................................15
9. FIRMWARE UPGRADE...................................................................................................................................16
10. SMS PROGRAMMING.................................................................................................................................18
11. TECHNICAL DATA.........................................................................................................................................20
1. INTRODUCTION
The VBIP-G Mobile Communicaotrs are recommended for security installations, where
the reporting to Alarm Monitoring Service providers (AMS) has to be made over
Ethernet and/or mobile networks. The main reporting channel is the Ethernet network,
and the GPRS, WCDMA (HSPA/UMTS), or LTE mobile internet network. On 2G devices
GSM call can be used as a backup. For all ways, a primary and a secondary channel can
be given. The secondary channel can be used as a backup, or for parallel reporting
(double reporting). The VBIP-G communicators provide a reliable and secure solution for
event reporting over the internet, at an unbeatable price/performance ratio.
To be able to use and understand all the features of the VBIP-G series
communicators, please, read this Installer Manual carefully.
SAFETY NOTICE! Please, take care of installing and using this product
according to the instructions and procedures detailed in this manual to
ensure proper product safety.
2. SYSTEM OVERVIEW
The VBIP-G communicator receives the messages from the telco interface of the security
control panel, in Contact ID format, and forwards these through the wired or mobile
internet network or cellular network to the Alarm Monitoring Service central.
AMS receiverGSM
VBIP-G
Router
Mobile
internet
internet
Ethernet
3. OVERVIEW
Terminal block for connections (VBIP-G and VBIP-G-3G)
Antenna socket (SMA)
SIM card holder
USB connector for programming and debugging
Serial connector, for IO-84 and Secolink connection, or programming
Ethernet connector (10-Base T)
Power/Signal LED (LED-1)
Trouble LED (LED-2)
I/O indicator LEDs (LED-3 and LED-4)
Mobile Comm LED (LED-5)
Ethernet Status LED (LED-6)
11
11
Loading...