Viking VS-12BL, VS-14BL, VS-20BLX, VS-25BL, VS-25DBL User Manual
...
VIKING
Fingerprint
Lock
Enter
2
5
8
0
1
4
7
*
3
6
9
#
BIOMETRIC FINGERPRINT - LCD - KEYPAD SAFE
Body Material Steel
Can be open by Fingerprint / PIN code / Key
Optical Sensor 500 DPI, opens in fraction of a second
Fingerprint Entry Stores up to 32 ngerprints,
Memory Non-volatile memory - stored information is retained if batteries are removed.
Key Pad Entry Opens with 4-8 digits PIN code
Locking System Motorized door, deadbolt lock
High Security Keys 4 prong cross keys. Two included.
LCD display Battery Level indicator, Data Count indicator, OK and Error indicator, etc.
Sounds Mode On and OFF operational sounds
Warning sound Safe starts beeping if door is left unlocked for more than 1 minute.
Time Out Operation is put on HOLD for 2 minutes if multiple incorrect PIN or ngerprints are
input
LED light Build in LED light operates independently with 2 AA batteries
Warranty One-Year Limited Warranty
Batteries 4 AA
Included Accessories Mounting hardware and batteries
Fireproof No
Door Thickness 5 mm
Body Thickness 2 mm
www.vikingsecuritysafe.com | vikingsecuritysafes@live.com | 650-539-9482
DISCLAIMER: Not recommend for age groups 55 and above. Due to thinning ngerprints
ALL ngerprint readers will lose accuracy with increasing age.
VS-12BL WALL SAFE
VS-14BL TOP OPENING DRAWER SAFE
VS-20BLX MINI
VS-25BL
VS-25DBL SMALL DEPOSITORY SAFE
VS-35BL
VS-38BL EXTRA WIDE LAPTOP SAFE
VS-50BL LARGE
VS-52BL HIDDEN WALL SAFE
VS-52BLX HIDDEN WALL SAFE LASER CUT
Viking Security Saf
e
1. BEFORE FIRST USE
1.1. Unlock the safe with key. Keyhole is located under the Logo Plate. Remove
using Allen Key.
1.2. Install 4 AA batteries in battery compartment
B .
1.3. Install 2 AA batteries in LED light
D (see point 9 for instructions).
VIKING SECURITY SAFE
USER'S MANUAL
IMPORTANT
• Operational sounds can be switched ON and OFF. However, Warning Beep sounds if safe is left UNLOCKED
for longer than 1 minute.
• If the safe is in lock state, locking bars sticking out, Red Button (A) is NOT functional. You cannot erase
ngerprint data, program the safe nor do any operation.
• Remember to program the same ngerprint in multiple positions.
• Remember to register new PIN code, so safe can no longer be open with factory default PIN “1234”
• If safe is reset to factory default mode, any ngerprint and default PIN code can open the safe.
• Test with non-registered ngerprints and PIN code. If safe opens, the safe is still in factory default mode.
• Time Out Period locks the safe for 2 minutes if multiple incorrect PIN codes or ngerprints are input. LCD
displays “HOLD-Err”.
• Test the keys and store them in a secure place, NOT inside of the safe.
• When the screen shows " ", please change the battery. All registered ngerprints and PIN will be
saved.
DISCLAIMER: Not recommend for age groups 55 and above. Due to thinning ngerprints ALL ngerprint
readers will lose accuracy with increasing age.
GENERAL DESCRIPTION
VIKING
Fingerprint
Lock
Enter
2
5
8
0
1
4
7
*
3
6
9
#
D
B
E
A
F
G
I
H
C
M
LK
J
A
Initialization/Reset Red Button
B
Battery Compartment
C
Locking Bars
D
LED light
E
Motorized Door
F
Fingerprint Scanner
G
LCD display
H
Data Count Indicator
I
Battery Indicator
J
Key Pad
K
Star Button (*)
L
Pre-Scan Pound Button (#)
M
Logo Plate and Key Access
VIKING
page 2/4
www.vikingsecuritysafe.com | vikingsecuritysafes@live.com | 650-539-9482
Loading...