Viking VS 2625 Operation Manual

VS 2625

2-WAY LCD PAGER ALARM

Operation Manual

MEGATRONIX

CHATSWORTH, CA USA

VS 2625 OPERATE

TABLE OF CONTENTS:

A. REMOTE TRANSMITTER OPERATION ………………………………………….………………….………..3 B. 2-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION ONLY……………………….………... 3 C. LED DISPLAY .……………..……………………………………………………………………….……………. 3 D. CHIRP INDICATOR ..………..……………………………………………………………………………..……. 3 E. PARKING LIGHT …….……..…………………………………………………………………………..….…….. 3 F. ALARM OPERATION CONDITION .……………………………………………………………………………. 3 G. ACTIVE ARMING – ARM & LOCK .……………………………………………………………………………. 4

Ajar Warnng Silent Arming / Disarming Noiseless Mode Shock Sensor By-Pass Hidden Alarm Function

H. PASSIVE ARMING .……………………………………………..……………………………………………….. 4

Passive Arming with Passive Door Locking Passive Arming By-Pass

I. ACTIVE DISARMING – UNLOCK & DISARM .……………………………………………………..…………. 4

Tamper Disarming Pathway Illumination Two Steps Door Unlock Automatic Re-Arm

J. DISARMING WITHOUT A TRANSMITTER .……………..…………………………………………………… 5

Overrides the Alarm without Password Pin Code Overrides the Alarm With Password Pin Code

K. VALET MODE .……………..……………………………………………………………………….……….…… 6

Enter Valet Mode Exit Valet Mode Remote Valet Mode

L. CAR LOCATOR .……………………………………………………………………….………………………… 6 M. PANIC FUNCTION .………………………………………………………………………………...…………… 6 N. TRIGGER THE SYSTEM .………………………………………..…………………………..……….………… 6

Clear The Trigger Icons and Melody Sound

O. ANTI CAR- JACKING .………………………………………………………………………………………….. 7

Active Car Jacking Passive Anti Car Jacking Trigger The Anti Car Jacking Mode Override The System To Turn Off Anti Car Jacking

P. SYSTEM’S TRIGGER CHECK ………………………………………………………………….….…...…….. 8 Q. SYSTEM’S STATUS CHECK ………………………………………………………………..……….……….. 8 R. DRIVER PAGING (OPTIONAL) ………..…………………………….…………..……………………..…….. 8 S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION ……………………..……………….……..….. 8 T. IGNITION CONTROL THE DOOR LOCK/UNLOCK. ………..………………….……………………….…. 8 U. TRUNK RELEASE (CHANNEL 3) OUTPUT ………..………………………………………………….……. 9

V. CHANNEL 4 TIMER CONTROL OUTPUT ………..………………………………………………....…..….. 9

W. POWER ON MEMONRY: ………..…………………………………………………………………..….….…. 9

LCD REMOTE TRANSCEIVER:

A. BATTERY REPLACEMENT ……………………………….……………………………………………….…... 9 B. THE REMOTE LCD ICONS WITH FUNCTION ……….…………………………………………………..….. 9 C. PROGRAMMING OF THE LCD REMOTE TRANSCEIVER ………………………………………………. 10

1. Screen Lamp ON

2. Power Save Mode

3. Clear The Flash Icon and Melody Sound

4. Stop The Melody Sound.

5. Button Lock

6. Vibration / Melody Mode

7. Enable / Disable Bi Sound While Pressing Button:

8. Low Battery Indication

9. Set Up Fixed Count Down Timer

10. Out Of The Range Check

D. TIMER SETTING ……………………………….………………………..…………………….…………..……. 12

1. Timer Setting

2. Alert Alarm Timer Setting

3. Count Down Timer Setting

VS 2625 OPERATE

OPERATION:

A. TRANSMITTER OPERATION:

Transmitter Button System Function Remark

Lock Doors and Arm System

Arm and Delete the 2 Stage Shock Sensor Press twice within 3 seconds

- -

Arm and Noiseless Mode Press within 3 seconds

Arm System and Hidden Alarm Function Press within 3 seconds

Silent Arming / Disarming Ignition in "off" position.

+ (2-second)

Active Anti Car-Jacking Mode Ignition in "on" position press and

hold for 2 seconds

Unlock Doors and Disarm System

2-Step Door Unlock and Disarm System Press twice within 3 seconds

(2-second)

Trunk Release (Channel 3) Press and Hold for 2 seconds

Passive Arming By-pass While the system is disarmed

- -

Remote Control Entry/Exit Valet Mode While the system is disarmed

Press within 3 seconds

Channel # 4 Timer Output

Car Locator (3-second) Panic function Press and Hold for 3 seconds

B. 2-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION ONLY:

Transceiver Button System Function Remark

F - (C)

System’s Trigger Check Press within 3 seconds

F - F - (C)

System’s Status Check Press within 3 seconds

F - ( )

Optional Driving Pager Press within 3 seconds

F (1 second) LCD screen lamp turns on for 5 seconds. Press and hold for 1 second F - F - F

Clear the Flash Icon and Melody Sound on the LCD Screen Transmitter

Press within 3 seconds

C.LED INDICATORS:

LED Status LED Status Off Disarmed 2 flashes... pause Zone 2 / Trigger on Trunk/Hood Slow flash Armed 3 flashes... pause Zone 3 / Trigger on Door Switch Fast flash Passive arming 4 flashes... pause Zone 4 / Trigger on Shock Sensor On (solid) Valet mode 5 flashes... pause Zone 5 / Trigger on Ignition Switch

D. CHIRP INDICATORS: E. PARKING LIGHT:

Chirp Function Parking light Function 1 chirp Arm 1 flash Arm 2 chirps Disarm 2 flashes Disarm 3 chirps Ajar Warning 3 flashes Triggered 6 chirps Car locator

12 flashes Car locator

F. SYSTEM OPERATING CONDITION:

Siren, Horn Parking Light LED Doors Starter Dome Light

1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable

2. Disarming 2 or 4 Chirps 2 or 3 Flashes Fast Flash or Off

Unlocking Turns on for

30 -second

3. Trigger Alarming Flashes Slow Flash Disable Flashes

4. Panic Alarming Flashes Flashes

5. Car-Jacking Alarming Flashes Disable Flashes

6. Car Locator 6 Chirps 12 Flashes

VS 2625 OPERATE

G. ACTIVE ARMING – LOCK & ARM:

1. Press button on the transmitter.

2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle doors will lock upon arming when interfaced with the security system.

System Arm

Door Ajar

Trunk / Hood Ajar

Clear The Flash Icon: Press the

F button 3

times within 3 seconds will clear the flash icon on the LCD screen transceiver.

AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See Alarm Feature “I

- 3 Programming)

SILENT ARMING / DISARMING:

Press the and buttons at the same time on the transmitter will

arm or disarm your security system, No chirp sounds will be heard, arm / disarm confirmation will be through the vehicles parking lights only.

SHOCK SENSOR BY-PASS: Press the

button on the transmitter twice within 3 seconds will arm the security system and bypass the shock sensor. The system will chirp one additional time to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.

NOISELESS MODE: Press

button once. The siren chirps once, The system is now armed.

Press the

button twice more within 3 seconds: The siren chirps once again, the system is now in Noiseless mode. On this mode, for the zone 4 shock sensor, the trigger timer will reduced from 30 seconds to 15 seconds. The noiseless feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.

HIDDEN ALARM FUNCTION: Press the

button first; within 3 seconds press the button to activate the hidden alarm function. The security system will arm and with “Hidden Alarm Function”. The siren / horn will be silenced even if the sensor is triggered in the armed status.

H. PASSIVE ARMING (See Feature “II - 2” Programming)

Active arming / disarming will allow you to control your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows.

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the vehicle all entrances are closed.

3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1] time and the parking lights will flash [1] time and remain on for 10-seconds.

PASSIVE DOOR LOCKING: (See Feature “II - 2” Programming) The vehicle doors will automatically lock after passive arming cycle has been completed. PASSIVE ARMING BY-PASS: While the system disarmed, Press the button twice, the security will respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporally state

for as long as you wish. To exit passive by-pass, press the transmitter

button and the system

will return to normal status.

I. ACTIVE DISARMING – UNLOCK & DISARM:

1. Press button on the transmitter.

2. The siren will chirp twice and parking light will flash twice and then remain on for 30 seconds indicating that the security system is now disarmed. The vehicle doors will unlock and dome light wills turns on for 30 seconds upon disarming when interfaced with the security system.

VS 2625 OPERATE

+ 8 hidden pages

Viking VS 2625 Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual