Viking E-10, E-10-EWP, E-20A, E-20A-EWP Technical Practice

E-10, E-10-EWP

E-10, E-10-EWP,,

E-20A, E-20A-EWP

E-20A, E-20A-EWP

Speaker Phones

May 9, 2006

PPhhoonnee......771155..338866..8888661

1

i

i

n

n

f

f

o

o

@

@

v

v

i

i

k

k

i

i

n

n

g

g

e

e

l

l

e

e

c

c

t

t

r

r

o

o

n

n

i

i

c

c

s

s

.

.

c

c

o

o

m

m

hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom

m

Power: Telephone line powered (18 VDC/20mA minimum)
E-10 Dimensions: Overall: 127mm x 127mm x 57.2mm (5” x 5”

x 2.25”), Rough-in box: 102mm x 102mm x 57mm (4” x 4” x 2.25”)

E-20A Dimensions: 140mm x 115mm x 38mm (5.5” x 4.5” x 1.5”)
Shipping Weights: E-10: 0.91 kg (2 lbs), E-20A: .75 kg (1.5 lbs)
Standard E-10/E-20A Environment: -26° C to 54° C (-15° F to

130° F) with 5% to 95% non-condensing humidity
E-10/E-20A-EWP Environment: -26° C to 54° C (-15° F to 130°
F) with up to 100% condensing humidity

Speaker Volume: Approximately 70db maximum @ 1m
Ring Voltage: 30V AC RMS minimum
CPC Disconnect Time: 300ms minimum
REN: 0.7A
Standard Connections: (1) 2-position terminal block
EWP Connections: (2) gel-filled butt connectors

Provide Convenient Handsfree Communication

The E-10 and E-20A are telephone line powered speaker phones designed
to provide two-way handsfree communication.

The E-10 and E-20A can be connected
directly to a C.O. line or analog
PABX/KSU station when used in con­junction with a Hot-Line Dialer or pro­grammed ring down circuit. The E-10
and E-20A can also be used with
Viking’s DLE-200B ring down circuit.

When the “Call” button is pressed, the
E-10 or E-20A will come off-hook and

PPrraaccttiicce

e

T

T

EELLEECCOOM

M

S

S

OOLLUUTTIIOONNSSFFOORRTTHHE

E

221

1

SST

T

C

C

EENNTTUURRY

Y

TECHNICAL

TECHNICAL

SSppeecciiffiiccaattiioonns

s

FFeeaattuurrees

s

• Telephone line powered

• Weather resistant

• Optional Enhanced
Weather Protection (EWP)

• Adjustable microphone and speaker volume

• Adjustable call time out, to limit prank calls and false

alarms (approximately 6 seconds - 5 minutes)

• Call timer ON/OFF switch

• Selectable auto-answer feature allows remote
monitoring

• Two way handsfree communication

• VOX (mic/speaker) switching speed selection

E-10/E-10-EWP Features

- Vandal resistant, black powder painted, aluminum
face plate with heavy duty metal call button and
mounting gasket

- Flush mountable using included plastic rough-in box
part # 259576

- Surface mountable with
an optional VE-5x5

E-20A/E-20A-EWP Features

- Light gray colored, impact resistant, U.V. stable,
plastic chassis

- Surface mountable only

will remain off-hook until a CPC is detected or the pre-selected timeout
has elapsed, the unit will then automatically disconnect.

For outdoor or harsh environments, the E-10 and E-20A are available with Enhanced Weather Protection
(EWP). The E-10-EWP and E-20A-EWP feature rubber gaskets and boots, closed cell foam gasketing,
hand soldered silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as well as ure­thane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

E-10/E-10-EWP

E-20A/E-20A-EWP

?

Need More Information on VE-5x5?

Call [phone] and select 424.

?

Need More Information on EWP?

Call [phone] and select 859.

• Commercial, industrial and residential door security

• Door or gate communication

• Business delivery entrances

• Use in conjunction with a Viking Hot-Line Dialer on
C.O. lines or analog PABX/KSU stations

• Use on any programmed ringdown circuit of an analog
PABX/KSU station

AApppplliiccaattiioonns

s

The E-10 and E-10-EWP are designed to be flush mounted to the included 4” x 4” x 2” deep plastic rough in box or surface mount­ed using optional Viking model VE-5x5. Note: The E-10 and E-10-EWP will NOT mount to a standard double gang box. The plas-

tic rough in box (part # 259576) may be purchased separately. Go to www.vikingelectronics.com and click on “Spare Parts”.

A. Mounting the E-10 and E-10-EWP

Front View of Optional

VE-5x5 (not included)

2.25”

Condensation

Drain Hole

* 1/8" thick foam gasket (included)

5.14”

5.22”

3.25”

Call

4.0"

Rear View of VE-5x5 (not included)

Push to Call Button
(4) 6-32 X 3/4” stainless steel, flat head,

hexdrive, screws (included)
Condensation Drain Hole

5.0” Typical

E-10A shown with

Viking Model

VE-GNP

Gooseneck

Pedestal

(4) 0.38” diameter (for gooseneck mounting)
(4) 0.2 x 0.43 slots for double gang box
(2) 0.2 x 0.43 slots for single gang box

(1) .74" dia

3.0” 3.3”

3.0”

2.1”

Wall Stud

Front View of Plastic

Rough-In Box (included)

Wire knock out
(2) Standard flat head dry wall

(sheet rock) screws (not included)

IF YOU HAVE A PROBLEM WITH AVIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT [phone]

Our Technical Support Department is available for assistance Monday 8am-4pm and Tuesday-Friday 8am - 5pm central time. So that we can give you better service, before you call please:

1. Know the model number, the serial number and what software version you have (see serial label).

2. Have your Technical Practice in front of you.

3. It is best if you are on site.

WARRANTY

Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manu­factured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.

This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.

Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANYLOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSE­QUENTIAL DAMAGES RESULTING DIRECTLYOR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limi­tation of incidental or consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED
BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

RETURNING PRODUCT FOR EXCHANGE

The following procedure is for equipment that has failed out-of-box (within 10 days of purchase

):

1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The

customer MUST be able to step through recommended tests for diagnosis.

2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
calendar days from the date of issue.

3. After obtaining the R.A. number, return the approved equipment to your distributor

, referencing the R.A. number. Your
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
Viking using the same R.A. number.

4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't
followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.

RETURNING PRODUCT FOR REPAIR

The following procedure is for equipment that needs repair:

1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)

number. The customer MUSThave a complete description of the problem, with all pertinent information regarding the
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.

2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individual­ly boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:

Viking Electronics, 1531 Industrial Street, Hudson, WI 54016

3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.

4. RAnumber on carton: In large printing, write the R.A. number on the outside of each carton being returned.

If the trouble is causing harm to the telephone network, the telephone company may request you to remove

the equipment from the network until the problem is resolved.

The E-10/E-10-EWP/E-20A/E-20A-EWP phones use the USOC jack RJ11C.
It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is con-

nected. This is to avoid damaging the equipment caused by local lightning strikes and other electrical surges.

This equipment is Hearing-Aid Compatible (HAC).

The telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any message unless such message clearly contains in a mar­gin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or other individual sending the message and the tele­phone number of the sending machine or such business, other entity, or individual. (The telephone number pro­vided may not be a 900 number or any other number for which charges exceed local or long-distance transmis­sion charges.)

PART 15 LIMITATIONS

This equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radi­ate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.

FCC REQUIREMENTS

This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains,
among other information, the FCC registration number and ringer equivalence number (REN). If requested, this
information must be provided to the telephone company.

The REN is used to determine the quantity of devices which may be connected to the telephone line.
Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the REN's should not exceed five (5.0) T o be certain of the number of devices
that may be connected to the line, as determined by the total REN's, contact the telephone company to deter­mine the maximum REN for the calling area.

This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line

Service is subject to State Tariffs.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. If advance notice isn't practical, the telephone com­pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modifications in order to maintain uninterrupted service.

If trouble is experienced with this equipment, please contact: Viking Electronics, Inc., 1531 Industrial

Street, Hudson, WI 54016 [phone]

The optional VE-5x5 Surface Mount Box is designed
to be surface mounted to a single gang box, double
gang box or VE-GNP gooseneck pedestal (right).

?

Need More Information on VE-5x5 or VE-GNP?

Call [phone] and select 424.

* Note: Peel off paper liner and
adhere gasket to the back of the
faceplate, centering it over the four
corner mounting holes.

IInnssttaallllaattiioon

n