3
IMPORTANT–Please Read and Follow!
WARNING
The use of cabinets for storage above
the oven may result in potential
fire or burn hazard.
WARNING
ELECTRICAL GROUNDING
INSTRUCTIONS –
This oven must be electrically grounded
in accordance with local codes or, in the
absence of local codes, with the
National Electrical Code,
ANSI/NFPA 70 – latest edition.
WARNING
Frame grounded by a
4-conductor cable assembly.
See pages 18-19.
DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE. SUCH USE MAY
RESULT IN FIRE, ELECTRICAL SHOCK OR
OTHER PERSONAL INJURY.
WARNING
The misuse of the oven door(s) (e.g.
stepping, sitting, or leaning on them)
can result in hazards or injuries and
damage to the product.
WARNING
The oven is heavy – use extreme care
when handling!
WARNING
DO NOT use the handle or oven door
to lift the oven. Remove door before
installation to ensure that it is
not used to lift the unit.
WARNING
This appliance should not be used for
space heating. This information is based
on safety considerations.
• Before beginning, read these instructions
thoroughly and carefully.
• Do not remove permanently affixed labels,
warnings or plates from the
product as this may void the warranty.
• Observe all local and national codes,
requirements and ordinances.
• Installation must conform with local codes or in
the absence of codes, the National Electrical
Code, ANSI/NFPA 70 – latest edition.
• IN MASSACHUSETTS: This appliance must be
installed by a Massachusetts licensed plumber or
electrician.
• IN CANADA: Installation must be in accordance
with the current CSA C22.1 Canadian Electrical
Codes Part 1 and/or local codes.
• Installers should leave these instructions with the
consumer who should retain them for the local
inspector’s use and for future
reference.
Site Preparation
It is recommended that a thorough site inspection be
conducted PRIOR to unpacking and moving this appliance.
Note:
Wiring diagram is located on top of oven or in control panel.