Viking DCCE2010 User Manual

Standard Features & Accessories

All models include

• Must also purchase interior or exterior
ventilator kit, sold separately (see
Installation Notes & Accessories for
recommended Viking ventilator
products

• 24”D.(tests show 24”D. hoods
perform properly over 27”D. ranges)

• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels

• Variable speed controls for custom
venting—separate on/off switch allows
you to leave ventilator at
favorite/most-used setting

• 12-hour timer built into ventilator
controls

• Delay feature allows you to set the
ventilator to shut off on its own from
10 – 30 minutes later

• Heavy-duty construction; elegant
design, and styling
o Virtually seamless stainless steel

design with no visible screws

• Easy cleanup
o Dishwasher-safe, stainless steel

mesh filters efficiently remove
grease and heated vapors from the

air, and are easily removed for quick
cleaning (frame and mesh are
stainless steel for durability and long
life)

• See Dimensions & Specifications

table for number of filters (and
spacers) per model

o Design of low-profile filter system

means less interior hood space to
be cleaned

o Canopy interior is completely lined

in stainless steel for increased
rigidity, seamless appearance, and
easy cleaning

• 50-watt halogen lights with dimmer
control
o Power switch and dimmer control

are separate, allowing you to leave
dimmer at favorite position

o See Dimensions & Specifications

table for number of lights per model

DTWS models include

• 9"H.

• Adjustable duct cover (for 8 – 9’
ceilings) shipped standard (see
Dimensions & Specifications table)
o Finish matches canopy exterior

VENTILATION

Designer Built-In Wall Hoods

DTWN models include

• 18"H.

• Duct covers must be ordered
separately (see Installation Notes &
Accessories)

Model numbers

LIM TRADITIONAL WALL HOODS

S

• DTWS3049—30"W.

• DTWS3649—36"W.

• DTWS4249—42"W.

• DTWS4849—48"W.

ALL TRADITIONAL LEGDELESS WALL

T
HOODS

• DTWN3048—30"W.

• DTWN3648—36"W.

• DTWN4248—42"W.

• DTWN4848—48"W.

Slim Traditional Wall Hoods should not
be installed over Professional cooking
products with the gas Char-Grill feature.
A 1,200 or 1,500 CFM (if applicable)
ventilator kit should be used when
installed over ranges/rangetops with gas
grill.

Model Options

DTWS Slim Traditional

Wall Hood*

FINISH DETAILS

• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Golden Mist (GM), Lemonade (LE),
Sage (SA), Mint Julep (MJ), Sea Glass (SE),
Iridescent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Red (RR), Apple
Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).

• Finish designates exterior of canopy

• Stainless Steel (SS) canopy interior

*Shown throughout with adjustable duct cover, included.
**Shown throughout with duct cover, sold separately.
See Installation Notes & Accessories for duct cover model numbers and ship weights.

EXTRA FINISH DETAILS FOR DTWS
MODELS ONLY

• Accessory Rail—along front of canopy
(must be ordered and factory installed)

• Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
and hooks (included)

• Brass Trim Option (BR)—nameplate, rail,
supports/brackets, and hooks (included).
Brass components have a durable
protective coating for maintenance-free
normal use.

DTWN Tall Traditional

Ledgeless Wall Hood**

ORDERING INSTRUCTIONS

First specify model number, followed by color code (DTWS3049SS). Specify decorative rail code at end (DTWS3049SSCR).

P LA N N I N G A ND DE SI GN G U ID E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

R E V I SE D 5/ 2 / 1 1

2

4

”

(

6

1

.

0

c

m

)

A

9

”

(

2

2

.

9

c

m

)

C

B

1

2

”

(

3

0

.

5

c

m

)

2

”

(

5

.

1

c

m

)

1

3

”

(

3

3

.

0

c

m

)

VENTILATION

2

4”

(

61.

0

c

m

)

A

B

1

8

”

(45

.7

cm

)

1

2

”

(30

.

5

c

m

)

12

”

(3

0

.

5

c

m

)

Designer Built-In Wall Hoods

Please see

✪

Installation Notes &

Accessories for

important information,

including ventilator

kits, duct covers,

backsplashes, and

warming shelf

panels.

Dimensions & Specifications

PRODUCT DIMENSIONS

DTWS Slim Traditional

Wall Hood

DTWN Tall

Traditional Ledgeless

Wall Hood

SLIM TRADITIONAL
WALL HOOD

TALL TRADITIONAL
LEDGELESS WALL HOOD

Model Hood Duct Cover Lights Filters Heat Approx.

Width (A) Height Width (B) Depth Height (C) Lamps Ship. wt.

DTWS3049 29-7/8” (75.9 cm) 9” (22.9 cm) 12” (30.5 cm) 12” (30.5 cm) 21” (53.3cm)— 22N/A 50 lbs.

33” (83.8 cm) (22.5 kg)

DTWS3649 35-7/8” (91.1 cm) 9” (22.9 cm) 12” (30.5 cm) 12” (30.5 cm) 21” (53.3cm)— 22N/A 60 lbs.

33” (83.8 cm) (27.0 kg)

DTWS4249 41-7/8” (106.4 cm) 9” (22.9 cm) 12” (30.5 cm) 12” (30.5 cm) 21” (53.3cm)— 23N/A 70 lbs.

DTWS4849 47-7/8” (121.6 cm) 9” (22.9 cm) 20” (50.8 cm) 12” (30.5 cm) 21” (53.3cm)— 33N/A 81 lbs.

DTWN3048 29-7/8” (75.9 cm) 18” (45.7 cm) 29-7/8 12” (30.5 cm) 12” (30.5 cm) 22N/A 59 lbs.

DTWN3648 35-7/8” (91.1 cm) 18” (45.7 cm) 35-7/8” 12” (30.5 cm) 12” (30.5 cm) 22N/A 69 lbs.

DTWN4248 41-7/8” (106.4 cm) 18” (45.7 cm) 41-7/8” 12” (30.5 cm) 12” (30.5 cm) 23N/A 79 lbs.

DTWN4848 47-7/8” (121.6 cm) 18” (45.7 cm) 47-7/8” 12” (30.5 cm) 12” (30.5 cm) 33N/A 90 lbs.

33” (83.8 cm) (31.5 kg)

33” (83.8 cm) (36.5 kg)

(75.9 cm) (26.6 kg)

(91.1 cm) (31.1 kg

P LA N N I N G A ND DE SI GN G U ID E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

(106.4 cm) (35.6 kg)

(121.6cm) (40.5 kg)

R E V I SE D 5/ 2 / 1 1

© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

6

6

”

m

i

n

.

(

1

6

7

.

6

c

m

)

t

o

7

2

”

m

a

x

.

(

1

8

2

.

9

c

m

)

3

0

”

m

i

n

.

(

7

6

.

2

c

m

)

t

o

3

6

”

m

a

x

.

(

9

1

.

4

c

m

)

3

6

”

(

9

1

.

4

c

m

)

Dimensions & Specifications

3

0”

mi

n.

(76

.

2 c

m

)

t

o

36

”

max

.

(91

.

4 c

m

)

6

6

”m

in.

(16

7.6
cm)

t

o

7

2”m

a

x

.

(18

2.9
cm)

3

6”

(

91

.4

cm)

CLEARANCE DIMENSIONS

SLIM TRADITIONAL
WALL HOOD

VENTILATION

Designer Built-In Wall Hoods

TALL TRADITIONAL
LEDGELESS WALL HOOD

P LA N N I N G A ND DE SI GN G U ID E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

R E V I SE D 5/ 2 / 1 1

© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

Installation Requirements

VENTILATION

Designer Built-In Wall Hoods

DTWS Slim Traditional

Wall Hood

DTWN Tall

Traditional Ledgeless

Wall Hood

UTILITY REQUIREME NTS

Proper installation/ducting is extremely
important to ensure maximum
performance. Use a qualified and
trained installer.

DUCTING

• Check with a qualified and
trained installer or local codes
for makeup air requirements, if
any.

• Max. duct run length
o For 300 – 1,200 CFM—50’

(152.4 m)

o For 1,500 CFM—75’ (22.9 m)

o For general reference only;

for longer duct runs, increase
duct size and contact a
qualified and trained installer.

Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly
overstated.

o Straight runs and gradual

turns are best; for example,
each 90° elbow is equivalent
to 5’ – 10’ (1.52 – 3.05 cm) of
straight run.

• 7” (17.8 cm) round duct for
300 – 600 CFM; 10” for 900 –
1500 CFM
o Never use flexible duct; it

creates back pressure/air
turbulence and greatly
reduces performance.

GAS

Not applicable

ELECTRICAL

• Hardwire direct with two-wire
ground

• 120 VAC/60 Hz

• Max. amp usage (rating
includes recommended
ventilator kit rating)—see
Dimensions & Specifications
table

PLUMBING

Not applicable

Model Ventilator Kits Duct Size Max. Amps

Interior Exterior Interior Exterior Interior Exterior

DTWS3049 DIV300/440 DEV900/DIL900 7” (17.8 cm) 10” (25.4 cm) 1.7/3.2 6.6
DTWS3649 DIV300/440 DEV900/1200/DIL900/1200 7” (17.8 cm) 10” (25.4 cm) 1.7/3.2 6.6
DTWS4249 DIV440 DEV900/1200/DIL900/1200 7” (17.8 cm) 10” (25.4 cm) 3.2 6.6

DTWS4849 DIV880 DEV1200/1500**/DIL1200 10” (25.4 cm) 10” (25.4 cm) 5.6 4.3/5.1
DTWN3048 VIV300/600/1200* VEV900/1200*/DIL900/1200 7” (17.8 cm) 10” (25.4 cm) 2.4/4.6/6.6 6.6/3.9
DTWN3648 VIV300/600/1200* VEV900/1200*/DIL900/1200 7” (17.8 cm) 10” (25.4 cm) 2.4/4.6/6.6 6.6/3.9
DTWN4248 VIV600/1200* VEV900/1200*/DIL900/1200 7” (17.8 cm) 10” (25.4 cm) 4.6/6.6 6.6/3.9
DTWN4848 VIV1200* VEV1200/1500**/DIL1200 10” (25.4 cm) 10” (25.4 cm) 7.0 4.3/5.1

* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs.

Note: Maximum amp rating for hoods includes recommended ventilator kit rating. All products must be hard wired with two-wire ground. An interior- or
exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.

P LA N N I N G A ND DE SI GN G U ID E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

R E V I SE D 5/ 2 / 1 1

VENTILATION

Designer Built-In Wall Hoods

Installation Notes & Accessories

✪

Ventilator Kits

• See Installation Requirements table for recommendations for each hood model

• A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill
Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty

•

Kit model Description Hood models Approx. ship wt. lbs. (kg)

DIV300 300 CFM interior power DTWS3049/3649 15 (6.8)
DIV440 440 CFM interior power DTWS3049/3649/4249 25 (11.3)
DIV880 880 CFM interior power DTWS4849 36 (16.2)
DEV900 900 CFM exterior power DTWS3049/3649/4249 39 (17.6)
DEV1200 1,200 CFM exterior power DTWS3649/4249/4849 53 (23.9)
DEV1500 1,500 CFM exterior power DTWS4849 47 (21.3)
VIV300 300 CFM interior power DTWN3048/3648 27 (12.2)
VIV600 600 CFM interior power DTWN3048/3648/4248 27 (12.2)
VIV1200 1,200 CFM interior power DTWN3048/3648/4248/4848 43 (19.4)
VEV900 900 CFM exterior power DTWN3048/3648/4248 39 (17.6)
VEV1200 1,200 CFM exterior power DTWN3048/3648/4248/4848 53 (23.9)
VEV1500 1,500 CFM exterior power DTWN4848 47 (21.3)
DIL900 900 CFM in-line power DTWS3049/3649/4249 20 (9.1)
DIL1200 1,200 CFM in-line power DTWS3649/4249/4849 25 (11.3)
VIL900 900 CFM in-line power DTWN3048/3648/4248 20 (9.1)
VIL1200 1,200 in-line power DTWN3048/3648/4248/4848 25 (11.3)

Duct Covers

• DCW for DTWN models
o 12”H./12”D.
o Extend height of hood by 12”; conceal duct

• Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass
(SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).
o When ordering, specify finish code following accessory model number (for example, DCSB3008-SS)

Model Description Approx. ship wt. lbs. (kg)

DCW30 Duct cover for 30”W. DTWN 10 (4.5)
DCW36 Duct cover for 36”W. DTWN 11 (5.0)
DCW42 Duct cover for 42”W. DTWN 13 (5.9)
DCW48 Duct cover for 48”W. DTWN 14 (6.3)

Duct Cover Extensions

• For use with DTWS Slim Traditional Wall Hoods

• Extends height of hood by up to 12” (for 10’ ceilings)

• Replaces adjustable duct cover supplied with hood

• Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass
(SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).
o When ordering, specify finish code following accessory model number (for example, DCCE1010-SS)

Model Description Approx. ship wt. lbs. (kg)

DCCE1010 Duct cover extension (for 30”W. DTWS hood) 4 (1.8)
DCCE1210 Duct cover extension (for 36” & 42”W. DTWS hoods) 6 (2.7)
DCCE2010 Duct cover extension (for 48”W. DTWS hood) 9 (4.1)

P LA N N I N G A ND DE SI GN G U ID E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

R E V I SE D 5/ 2 / 1 1

© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

VENTILATION

Designer Built-In Wall Hoods

Installation Notes & Accessories

✪

Backsplashes

• Stainless Steel (SS)

• 30”H.
Backsplashes protect the wall space below hood

•

• Create a continuous finish between cooking surface and hood

• Low maintenance, easy to clean

• Hemmed edges with screw holes

• Kit includes backsplash and fastening screws

Model Description Approx. ship wt. lbs. (kg)

BKS30 30”W. backsplash 7 (3.2)
BKS36 36”W. backsplash 9 (4.1)
BKS42 42”W. backsplash 12 (5.4)
BKS48 48”W. backsplash 14 (6.3)

Warming Shelf Panels

• Stainless Steel (SS)

• 12”D./12”H.

• Shelf panels hold cookware and condiments

• Fold up/down, heavy-duty warming shelves (non-removable), factory installed on stainless steel backsplash

• 15-7/8”W. X 10-1/8”D.

• Kit includes shelf (or shelves) and fastening screws

Model Description Approx. ship wt. lbs. (kg)

WGP30 30”W. warming shelf panels (one shelf) 9 (4.1)
WGP36 36”W. warming shelf panels (two shelves) 12 (5.4)
WGP42 42”W. warming shelf panels (two shelves) 14 (6.3)
WGP48 48”W. warming shelf panels (two shelves) 16 (7.2)

Compliance Information

WARRANTY SUMMARY*

• Three-year full warranty—complete product (Professional and Designer)

• Five-year limited warranty—all ventilator motors (Professional and Designer)

• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items (Professional and Designer)

*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.

Warranty valid on Viking products shipped within the United States and Canada.

P LA N N I N G A ND DE SI GN G U ID E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

R E V I SE D 5/ 2 / 1 1