Viking DCW36KA, DCW30AG, DCW48AG, DCW60BF, DCW42CS PRODUCT SPECIFICATIONS

Standard Features & Accessories

All models include

• Heavy-duty construction
o Virtually seamless stainless steel

design with no visible screws

• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels

• Recommended for 24”W., 30”W. &
36”W. non-griddle/grill ranges,
rangetops, and cooktops

• 460 CFM interior-power ventilator
comes standard with product
o Variable speed controls for custom

venting—separate on/off switch
allows you to leave ventilator at
favorite/most-used setting

• Two 50-watt halogen lights with
dimmer control
o Power switch and dimmer control

are separate, allowing you to leave
dimmer at favorite position

• Easy cleanup
o Design of low-profile filter system

means less interior hood space to
be cleaned

o Canopy interior is completely lined

in stainless steel for increased
rigidity, seamless appearance, and
easy cleaning

Professional 10”H. hoods include

• Commercial-type size, design, and styling

• Allow replacement of most older
hoods with minimal cabinet alteration

• Commercial-type baffle filter system
efficiently removes grease and heated
vapors from the air; especially
designed for use with commercial­type products

Designer 12”H. hoods include

• Professional-type size, design, and
styling

• Delay function—can be set to shut off
from 10 – 30 minutes later (10 min.
increments)

• 12-hour timer built into controls

• Two dishwasher-safe stainless steel
mesh filters are easily removed for
quick cleaning (frame and mesh are
stainless steel)

Model numbers

ROFESSIONAL WALL HOODS, 10”H./21”D.

P

• VWH2410—24”W.
o Recommended for use with 24”W.
non-griddle/grill ranges (for larger
equipment, use 18”H. hood)

• VWH3010—30”W.
o Recommended for use with 30”W.

VENTILATION

Built-In 10”H. Wall Hood w/Ventilator/

12”H. Chimney Wall Hood w/Ventilator

ranges, 30”W. non-griddle/grill
rangetops, and 30”W. cooktops

• VWH3610—36”W.
o Recommended for use with 36”W.

non-griddle/grill ranges, 36”W. non­griddle/grill rangetops, and 36”W.
cooktops

ESIGNER CHIMNEY WALL HOODS,

D
12”H./24”D.

• DCH3042—30”W.
o Recommended for use with 30”W.

ranges, 30”W. non-griddle/grill
rangetops, and 30”W. cooktops

• DCH3642—36”W.
o Recommended for use with 36”W.

ranges, 36”W. non-griddle/grill
rangetops, and 36”W. cooktops

Model Options

VWH Professional

FINISH DETAILS FOR PROFESSIONAL MODELS

• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Golden Mist (GM), Lemonade (LE),
Sage (SA), Mint Julep (MJ), Sea Glass
(SE), Iridescent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Red (RR), Apple
Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).

• Finish designates front and sides.

• Accessory Rail Option—Front of hood.
(Must be ordered factory installed)
o Stainless Steel/Chrome (CR)—

Stainless steel rail with chrome

Wall Hood

supports/brackets and hooks
(included).

o Brass Trim Option (BR)—nameplate,

rail, supports/brackets, and hooks
(included). Brass components have a
durable protective coating for
maintenance-free normal use.

FINISH DETAILS DESIGNER MODELS

• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite
Gray (GG), Stone Gray (SG), Taupe
(TP), Biscuit (BT), Cotton White (CW),
Oyster Gray (OG), Golden Mist (GM),
Lemonade (LE), Sage (SA), Mint Julep
(MJ), Sea Glass (SE), Iridescent Blue
(IB), Viking Blue (VB), Pumpkin (PM),

DCH Designer Chimney

Wall Hood

Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate
(CH), and Cobalt Blue (CB).

• Finish designates front and sides.

• Accessory Rail Option—Front of hood.
(Must be ordered factory installed)
o Stainless Steel/Chrome (CR)—

Stainless steel rail with chrome
supports/brackets and hooks
(included).

o Brass Trim Option (BR)—rail,

supports/brackets, and hooks
(included). Brass components have a
durable protective coating for
maintenance-free normal use.

ORDERING INSTRUCTIONS

First specify model number, followed by color code (VWH2410SS). If ordering optional decorative rail, specify code at end
(VWH2410SSCR).

P L A N N I N G A N D D E S I G N G U I D E

V I K I N G R A N G E . C OM • 1 - 8 8 8 - V I K I N G 1

© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE

R E V I S E D 5 / 5 / 1 0

24”

(

6

1.

0 c

m)

16”

(

40

.

6

c

m)

1

2

”

(

3

0

.

5

c

m

)

2

”

(

5

.

1 c

m

)

12”

(

30

.

5

c

m)

A

2

”

(

5

.

1

c

m)

2

1

”

(

5

3

.

3

c

m

)

A

1

2

”

(

3

0

.

5

c

m

)

1

0

”

(

2

5

.

4

c

m

)

4

”

(

1

0

.

2

c

m

)

3

”

(

7

.

6

c

m

)

VENTILATION

24

”

(

6

1

.

0

c

m

)

1

6

”

(

4

0

.

6

c

m

)

1

2

”

(

3

0

.

5

c

m

)

1

8

”

(

4

5

.

7

c

m

)

t

o

3

0

”

(

7

6

.

2

c

m

)

1

2

”

(

3

0

.

5

c

m

)

A

2

”

(

5

.

1

c

m)

21”

(5

3.

3

c

m)

A

1

2”

(

3

0

.

5

c

m

)

10

”

(2

5

.

4 c

m)

12

”

(

3

0

.

5

c

m)

6

”

(

1

5

.

2 c

m

)

Built-In 10”H. Wall Hood w/Ventilator/

12”H. Chimney Wall Hood w/Ventilator

Please see



Installation Notes &

Accessories for

important information,

including conversion

kits, filters, duct

covers, backsplashes,

and warming shelf

panels.

Dimensions & Specifications

PRODUCT DIMENSIONS

VWH Professional

Wall Hood

DCH Designer Chimney

Wall Hood

PROFESSIONAL DESIGNER

PROFESSIONAL
W/RECIRCULATING KIT

Model Hood Duct Cover Lights Filters Heat Approx.

VWH2410 23-7/8” (60.6 cm) 10” (25.4 cm) 23-7/8” 12” (30.5 cm) 12” (30.5 cm) 22N/A 48 lbs.

VWH3010 29-7/8” (75.9 cm) 10” (25.4 cm) 29-7/8” 12” (30.5 cm) 12” (30.5 cm) 22N/A 56 lbs.

VWH3610 35-7/8” (91.1 cm) 10” (25.4 cm) 35-7/8” 12” (30.5 cm) 12” (30.5 cm) 22N/A 60 lbs.

DCH3042 29-7/8” (75.9 cm) 12” (30.5 cm) 16” (40.6 cm) 12” (30.5 cm) 18” (45.7 cm)— 22N/A 56 lbs.

DCH3642 35-7/8” (91.1 cm) 12” (30.5 cm) 16” (40.6 cm) 12” (30.5 cm) 18” (45.7 cm)— 22N/A 60 lbs.

Width (A) Height Width Depth Height Lamps Ship. wt.

P L A N N I N G A N D D E S I G N G U I D E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

(60.6 cm) (21.7 kg)

(75.9 cm) (25.2 kg)

(91.1 cm) (27.0 kg)

30” (76.2 cm) (25.2 kg)

30” (76.2 cm) (27.0 kg)

DESIGNER
W/RECIRCULATING KIT

R E V I S E D 5 / 5 / 1 0

© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE

3

0

”

m

i

n.

(

76.
2

c

m)

to

33

”

m

a

x

.

(

83.
8

c

m)

66

”

m

i

n.

(

1

6

7

.

6

cm)

to

69”m

ax.

(

1

7

5

.

3

cm)

36”

(9

1

.4

cm

)

2

4

”

mi

n.

(

6

1.
0

c

m)

t

o

2

7

”

ma

x

.*

(

6

8.

6

c

m)

60”

m

i

n

.

(

1

5

2

.

4

c

m

)

t

o

63”

m

a

x.

(

1

6

0

.

0

c

m

)

36

”

(9

1

.4

cm

)

Dimensions & Specifications

CLEARANCE DIMENSIONS

VENTILATION

Built-In 10”H. Wall Hood w/Ventilator/

12”H. Chimney Wall Hood w/Ventilator

PROFESSIONAL

*Note: When installing with a 24” high-shelf, the
27” (68.6 cm) max. dimensions must be used.

DESIGNER

P L A N N I N G A N D D E S I G N G U I D E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

R E V I S E D 5 / 5 / 1 0

© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE

Installation Requirements

VENTILATION

Built-In 10”H. Wall Hood w/Ventilator/

12”H. Chimney Wall Hood w/Ventilator

VWH Professional

Wall Hood

DCH Designer Chimney

Wall Hood

UTILITY REQUIR EMENTS

Proper installation/ ducting is
extremely important to ensure
maximum performance. Use a qualified
and trained installer.

DUCTING

• 460 CFM inter ior (blow er
incl uded)

• Check with a qualified and
trai ned insta ller for local
code s and make up air
requirem ents, if any.

• Max. duct run length—50’
(152.4 m)

o Duc t run leng th is for

gene ral reference onl y;
for longer duc t ru ns,
increa se duct si ze and
cont act a qual ified and
trai ned insta ller.

Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be
greatly overstated.

o Str aight run s an d
grad ual turns are be st; for
exam ple, each 90° elbow
is eq uivalent to 5’ – 10’
(1.5 2 – 3.05 cm) of
stra ight run.

• 7” round duct
o Never use flexible duct; it

creates back pressure/air
turbulence and greatly
reduces performance.

GAS

Not applicable

ELECTRICAL

• Hardwire direct with two-wire
with ground

• 120 VAC/60 Hz

• Max. amp usage—5.6

PLUMBING

Not applicable

Model Interior Ventilator Kits Interior Duct Size Interior Max. Amps

VWH2410 460 CFM standard 7” (17.8 cm) 5.6
VWH3010 460 CFM standard 7” (17.8 cm) 5.6
VWH3610 460 CFM standard 7” (17.8 cm) 5.6

DCH3042 460 CFM standard 7” (17.8 cm) 5.6
DCH3642 460 CFM standard 7” (17.8 cm) 5.6

P L A N N I N G A N D D E S I G N G U I D E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE

R E V I S E D 5 / 5 / 1 0

VENTILATION

Built-In 10”H. Wall Hood w/Ventilator/

12”H. Chimney Wall Hood w/Ventilator

Installation Notes & Accessories



Recirculating Hood Conversion Kits

• Stainless Steel (SS)

• Eliminates ducting
Kit includes

•
o Two charcoal filters
o Installation hardware
o Top vent/grille

• Professional—4”H. x 12”D.

• Designer—2”H. x 12”D.

Model Description Approx. ship wt. lbs. (kg)

RK24 Professional 24”W. conversion kit 10 (4.5)

V

RK30 Professional 30”W. conversion kit 13 (5.9)

V

RK36 Professional 36”W. conversion kit 16 (7.3)

V

RK30 Designer 30”W. conversion kit 15.4 (7)

D

RK36 Designer 36”W. conversion kit 15.4 (7)

D

Charcoal Filters

• For use with VRK & DRK conversion kits

• Recommended replacement every 6 – 12 months

Model Description Approx. ship wt. lbs. (kg)

CFV11 Professional hood filter for 24”W. 1 (0.5)
CFV13 Professional hood filter for 30”W. & 36”W. 2 (0.9)
CF-D12 Designer hood filter for 30”W. 2 (0.9)
CF-D14 Designer hood filter for 36”W. 2 (0.9)

Duct Covers

• Specify finish code following accessory model number (for example, DCW24-SS)
o Professional models

• For VWH hoods

• 12”D.

• Extends height of hood by 12”—conceals duct

• Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Stone Gray (SG),

Taupe (TP), Biscuit (BT), Cotton White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint
Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB).

o Designer models

• For DCH hoods

• For 8’ – 9’ ceilings

• Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Stone Gray (SG),

Taupe (TP), Biscuit (BT), Cotton White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint
Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB).

• Not needed if using a DCCE1610

Model Description Approx. ship wt. lbs. (kg)

DCW24 Professional 24”W. duct cover 9 (4.0)
DCW30 Professional 30”W. duct cover 10 (4.5)
DCW36 Professional 36”W. duct cover 11 (5.0)
DCC16 Designer adjustable duct cover – for DCH 30” & 36” models 20 (9.0)

P L A N N I N G A N D D E S I G N G U I D E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

R E V I S E D 5 / 5 / 1 0

© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE

VENTILATION

Built-In 10”H. Wall Hood w/Ventilator/

12”H. Chimney Wall Hood w/Ventilator

Installation Notes & Accessories



Duct Cover Extension

• For DCH hoods

• 16”W. x 12”D. x 28 – 40”H.
Extends height of hood by up to 12” (for 10’ ceilings)

•

• Replaces adjustable duct cover supplied standard with hood

• Specify finish code following accessory model number (for example, DCCE1610-SS)

• Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Stone Gray (SG),
Taupe (TP), Biscuit (BT), Cotton White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint
Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB).

Model Description Approx. ship wt. lbs. (kg)

CCE1610 Designer duct cover extension 7 (15.4)

D

Backsplashes

• Stainless Steel (SS)

• 30”H.

• For both VWH & DCH hoods

• Backsplashes protect the wall space below hood

• Create a continuous finish between cooking surface and hood

• Low maintenance, easy to clean

• Hemmed edges with screw holes

• Kit includes backsplash and fastening screws

Model Description Approx. ship wt. lbs. (kg)

BKS24 24”W. backsplash 5 (2.3)
BKS30 30”W. backsplash 7 (3.2)
BKS36 36”W. backsplash 9 (4.1)

Warming Shelf Panels

• Stainless Steel (SS)

• 12”D. X 12”H.

• For both VWH & DCH hoods

• Shelf panels hold cookware and condiments

• Kit includes shelf (or shelves) and fastening screws

• Fold up/down, heavy-duty warming shelves (non-removable), factory installed on stainless steel backsplash

• 5-7/8”W. X 10-1/8”D.

Model Description Approx. ship wt. lbs. (kg)

WGP24 24”W. warming shelf panel (one shelf) 6 (2.7)
WGP30 30”W. warming shelf panel (one shelf) 9 (4.1)
WGP36 36”W. warming shelf panel (two shelves) 12 (5.4)

Compliance Information

WARRANTY SUMMARY*

• One-year full warranty—complete product

• Five-year limited warranty—all ventilator motors

• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items

* For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.

P L A N N I N G A N D D E S I G N G U I D E

V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1

© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE

R E V I S E D 5 / 5 / 1 0