VIITA Watches TC01 User Manual

First Steps VIITA Active Titan

The first start of your VIITA Active Titan HRV is fast and easy.

If the VIITA app is not already installed on your device, please follow these steps:

1. For Apple devices please click here. For Android devices here.

2. Tap Download on the App Store or Play Store.

3. Tap on Load. The installation process begins.

1. Activate the clock by pressing and holding the top button for 4 seconds.

2. Open the VIITA App to start the setup wizard.

3. Tap on REGISTRATION to create your profile.

4. Choose your VIITA Active Titan HRV. If there are several VIITA Watches in your area, make sure

that the name matches your watch.

5. Enter the pairing code displayed on your VIITA in the VIITA App. Then tap PAIR.

6. Follow the instructions in the VIITA App to complete the setup of your account.

Active Titan Controls

Navigation

1. Press one of the two buttons to activate your VIITA Active Titan Smartwatch.

2. Wipe left or right to navigate through the functions.

3. To access the home screen or cancel a function, press the top button. No matter in which position

or in which function you are, with the upper button you can cancel it and get to the home screen.

Quick Start My Challenge

1. Press the button below to activate your VIITA Active Titan Smartwatch.

2. Press the button below once more to access MyChallenge.

3. Select Running or Cycling, the selected mode is highlighted.

4. Select the planned route length

5. Choose the planned duration of your activity. Then tap START. Your activity starts automatically

after a 5 second countdown.

Tip: If you want to repeat your last challenge you can press the lower button 3 times.
Your VIITA Active Titan HRV automatically takes over the values of your last challenge.
So you can save time and get started right away.

Turn Off

1. Wipe to the left until you reach the SETUP menu. Tap on TURN OFF and confirm with YES.

Factory Reset

1. Press one of the two buttons to activate your VIITA Active Titan HRV.

2. Press both buttons simultaneously for 4 seconds to reset your Smartwatch to factory settings.

Then confirm with YES.

Of course, your training data, regeneration and stress values, calories and steps are retained on
the VIITA App when resetting to factory settings.

Functions Active Titan

Homescreen

Press one of the two buttons to activate the homescreen. Depending on the selected home screen, the
display shows different values.

Steps+kcals

Displays the current date, battery status, your current heart rate, your steps taken so far and your
calories burned so far for the current day.

Reg & Stress

Shows your water consumption, regeneration values, stress values and your individual training
recommendation.

Which of these two screens you want to use as a homescreen can be defined in the VIITA App.

Steps

The status bar symbolizes how close you are to your defined step daily goal. You can set this daily
goal in the VIITA App.

Calories

The status bar symbolizes how close you are to your set daily calorie target. You can set this daily
goal in the VIITA App.