VIGORHOOD PHOTOELECTRIC LK01 Users Manual

LK01, 360 Leather case with Bluetooth keyboard

User’s Guide

CAUTION: To use this product properly, please read the user's guide before installation

System Requirement

z Only for iPad
z Bluetooth versi on 2.0

Installation Guide

Step 1. Keyboard pairing
z Turn on the power switch, the blue LED will be lighted for 2 seconds, then the light

will go off.

z Press the “connect” button for 1-3 seconds, the blue LED on the keyboard should now be
periodically flashing.

z Turn on and unlock iPad, click on the iPad <settings>icon
z On the settings menu, select item <general>to access<Bluetooth>settings.

Click on<Bluetooth>to turn on the connection. iPad will automatically search for a Bluetooth
device.

z Bluetooth keyboard found, click on the device to connect.
z Entre the password code as displayed on screen.
z Bluetooth keyboard connected successfully.

Step 2. Charging the battery

When to charge

1 First-Time Use: Please charge at least 6 hours for the first time usage and charge at least
2 hours when battery runs low
2 Blue LED Blinking: When the blue LED starts blinking, it means the battery is nearly
empty

How to charge

Plug the USB cable into your keyboard and computer by USB port respectively and it starts
charging. Keyboard can work uninterruptedly during charging.

Product Specifications

z Bluetooth Specification: Version 2.0 Class 2
z Range of Frequency: 2.402GHz to 2.480GHz
z Operating Voltage: 3.7Vdc ( powered by Li-ion )
z Operation Current: < 5mA
z Standby Current: 1.2mA
z Sleep Current: < 0.2 mA
z Transmit Range: up to 10 meters

Troubleshooting

If you are unable to connect your Bluetooth Keyboard to the device, or the keyboard work
unconventionally, please try the following:

z Before you install your Bluetooth Keyboard, please make sure Bluetooth is turned on
z Ensure the Bluetooth Keyboard is within a 10 meters range of your device
z Ensure the passkey, is same (the keyboard should repeat the passkey and press return)