Vigilant Vision PD195WHV Operation Manual

LED Monitor

Operation Manual

TABLE OF CONTENTS

1, General information ........................................................................................................... 1

1.1 Product description and type of use ............................................................................................ 1

1.1.1 General features ............................................................................................................... 1

1.2 Opening the box......................................................................................................................... 1

1.2.1 Contents of the box ............................................................................................................ 1

1.3 Warnings.................................................................................................................................... 2

1.3.1 Power ................................................................................................................................. 2

1.3.2 Safety precautions................................................................................................................ 2

1.3.3 Installation precautions.......................................................................................................... 2

1.3.4 Cleaning the device................................................................................................................ 2

1.3.5 Privacy and copyright............................................................................................................. 2

2, Controls and settings ............................................................................................................. 3

2.1 Controls ................................................................................... ... ......................................... 3

2.2 OSD menu controls............................................................................... .......................................... 4

2.2.1 Picture.................................................................................................................................... 4

2.2.2 Position...................................................................................................................................... 5

2.2.3 Color ........................................................................................................................................ 7

2.2.4 OSD ........................................................................................................................................ 8

2.2.5 Set up .................................................................................................................................. 9

3, LED monitor quality and pixel ........................................................................................................ 9

4, Product specifications..................................................................................................................... 10

1. GENERAL INFORMATION

Dear Customer,

Thank you for having purchased this product. This document describes how to install and use the LED colour
monitor. Read this manual which contains information for correct, safe use carefully. Keep this manual at hand so
that you can refer to it when needed.

1.1 PRODUCT DESCRIPTION AND TYPE OF USE

The LED color monitor presents a very rugged structure. It is designed for continuous operation and can be used in
surveillance systems or Multi-media display without risks of excessive fatigue. The Flat Panel Display has an active
matrix, thin-film transistor (TFT), liquid crystal display (LCD).

1.1.1 GENERAL FEATURES

! Display area
! Wall mounting (bracket not included)
! audio input/output
! HDMI video input
! Two computer input channels of DVI & VGA

Wide inclination to allow viewing either from a seated position or standing up and when moving from one position
to the other. Multilingual OSD menu for easy setting and optimization of the display

1.2 OPENING THE BOX

Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are
either missing or damaged. Do not attempt to use the device in this case. Send the product back in its original
packing if it is damaged.

1.2.1 CONTENTS OF THE BOX

! LED monitor
! Remote Control
! Power supply unit 12VDC 3A
! Power cable
! HDMI cable
! Operation manual
! Audio Cable

Important Note: Accessories may be changed without prior notice.

1.3 WARNINGS

1.3.1 POWER

! Only use the power unit provided to power the device. Check mains rating before plugging the power unit in.
! Do not pull the cable to unplug the device.

1.3.2 SAFETY PRECAUTIONS

! Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce

material (solid or liquid) inside. If this should accidentally occur, disconnect the device from the mains and have
it inspected by qualified personnel.

! Never open the device. In all cases, contact the qualified personnel or authorized service center for repairs.
! Keep the device away from children, to prevent accidental damage.
! Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
! Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the device is

used in such conditions. Contact the retailer or authorized installer.

! It is advisable to disconnect the power if the monitor is not used for a long period of time.

1.3.3 INSTALLATION PRECAUTIONS
! To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in the

casing. Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not install
near sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas
subject to excessive dust, mechanical vibrations or shocks.

! Do not arrange this device on an unstable surface, such as a tottering or slanted table. The device could fall

causing injury or mechanical failures.

! Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of water

onto the device: risk of fire, electrocution or mechanical failure.

! Stop using the device if water or other material should penetrate inside: risk of fire and electrocution. Contact

the retailer or authorized installer.

! Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.
! Do not place heavy or heat generating objects on top of the device: this could damage the casing and/or

increase internal temperature causing faults.

! Do not cover the device with a cloth while it is running to prevent deforming the external casing and

overheating the internal parts: risk of fire, electrocution and mechanical failure.

! Keep magnets and magnetized objects away from the device to prevent faults.
! Do not use the device in presence of smoke, vapor, humidity, dust or intense vibrations.
! Wait for a while before operating a device immediately after transporting it from a cold place to a warm place

and vice versa. Wait on average for three hours: this will allow the device to adapt to the new ambient
environment (temperature, humidity, etc.)

! The monitor is provided with a plastic base and rubber feet. It can be positioned on a horizontal surface, such

as a desk or a table. Make sure that the device is fastened firmly and that it is not resting on unstable supports
or surfaces. Falling objects could cause severe injury and damage the device.

! Remember to adjust the brightness and contrast to obtain the desired image.
! The monitor can also be installed on the wall by means of a bracket (not provided).

1.3.4 CLEANING THE DEVICE

! Rub delicately with a dry cloth to remove dust and dirt.
! Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
! Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically treated clothes to clean the

device to prevent deformation, deterioration or scratches to the paint finish.

1.3.5 PRIVACY AND COPYRIGHT
! The LCD monitor is a device for surveillance and media systems. Recording of images is subject to the laws in

force in your country. Recording of images protected by copyright is forbidden.

! Product users shall be responsible for checking and respecting all local rules and regulations concerning

monitoring and recording video signals. The manufacturer SHALL NOT BE LIABLE for use of this product not in
compliance with the laws in force.

2. CONTROLS & SETTINGS

2. 1: Controls:

2. 1. 1 Control key board:
INPUT MENU U+ U- CH+ CH- POWER

1. “INPUT” Use this to select an input source or an item.

2. “MENU” Use this to select an menu or an item.

3. “U+” Use to increase the chosen item.

4. “U-” Use to decrease the chosen item.

5. “CH+” Use this to move up on the on-screen menu.

6. “CH-” Use this to move down on the on-screen menu.

7. “Power” Use this switch to turn on the monitor. Press this button again to turn off the monitor.

The indicators display the status of the power.

Indicator Status

Lit (Red) Power off

Lit (Green) Power on
Blinking (Red) Power saving mode

POWER CONNECTOR (DC)
Plug the power connector of the adapter into the respective DC socket.

Power BUTTON
This is used to switch the monitor on and off. The blue LED lights up when the monitor is on. When it is red it
shows standby condition.

VOLUME BUTTONS [3-4] AND CONFIRM [1]
They allow to change the volume (3 button increases the volume – 4 button decreases the

volume).

MENU BUTTON [2] AND CONFIRM

This is used to access and quit the OSD (On-Screen Display) Menu and to confirm the selected settings

VIDEO INPUT SELECTION BUTTON [1] To select the desired signal (“”HDMI”, “DVI”, “” or “VGA”) press the
button (2) to select the desired item. Press the button (3-4) “U+” and “U-” to confirm.

HDMI INPUT
It allows the connection of an HDMI signal and an audio signal, coming from an external source provided with an

HDMI output

DVI SIGNAL INPUT
PC input.

PC SIGNAL INPUT (VGA)
PC input.

AUDIO INPUT/OUTPUT(VGA)
Jack plugs audio input/output.

NO SIGNAL It means that no video signal is detected.

2.2 OSD MENU CONTROLS

Select the menu using the MENU [2] button in order to access the Menus and Submenus and their functions

Use of the buttons

Selection of the video input

! In order to show the possible video inputs, press the [1] button
! In order to scroll the options, use [5 or 6] buttons
! In order to confirm the selection press the [3 or 4] button.

Selection of the Menus

! In order to show the main Menu, press the [2] button.
! In order to select the Menus of the horizontal bar, press the [3] buttons.
! In order to select each single Menu, press the [5 or 6] button.
! In order to change a value (once the option is selected), press the [3-4] buttons.
! In order to confirm the selection, press the [2] button.
! In order to exit from Menus and Submenus, press the [1] button.

Volume adjustment
In order to vary the volume without entering the OSD Menu, use [3-4] buttons. 

2.2.1 PICTURE

1. Press -/+ button to select Position in the main menu, then press MENU [2] button to enter

2. You can also enter Position menu from the Main [2] menu.

BRIGHTNESS
It allows changing of image brightness, according to ambient light. Press “3” and “4” buttons to change the values

of this parameter.

Contrast: It allows changing of contrast between white and black areas of the image. A clear resolution of good
white, black and grey gradation is achieved by a proper setting of contrast. Press “3” and “4” buttons to change the
values of this parameter.

Gamma:

It allows to change image Gamma, Press“5” and “6”button to select Gamma, then press MENU button to confirm
the choice and enter the sub-menu. Press “3” and “4” button to choose on/off.

2.2.2 Position Menu

1, Press -/+ button to select Position in the main menu, then press MENU button to enter.

2. You can also enter Position menu from the Main menu.

Phase:

Press“5” and “6” button to select Phase, then press MENU button to confirm the choice and press “3” and “4”
button to adjust.

Clock:
Press -/+ button to select Clock, then press MENU button to confirm the choice and press -/+ button to adjust

H. Position:

Press-/+button to select H. Position, then press MENU button to confirm the choice and press - button image
toward the left migration. press + button image toward the right migration.

V. Position:
Press -/+ button to select V. Position, then press MENU button to confirm the choice and press - button image
toward the down migration. press + button image toward the up migration.

2.2.3 Colour Menu

1. Press“5” and “6” button to select Colour in the main menu, then press MENU button to enter.

2. You can also enter Colour menu from the Main menu.

COLOR

It allows to change colors of the image. Press “3” and “4” buttons to change the values of this parameter.

COLOUR TEMP.
It allows to change the color settings among the following: ”Warm – Cool – Normal”. Press “3” and “4” buttons to

change the values of this parameter.

Red: Press “5” and “6” button to select Red, then press MENU button to confirm the choice and press “3” and “4”
button to adjust the value of the primary colour of red.
Green: Press “5” and “6” button to select Green, then press MENU button to confirm the choice and press “3” and
“4” button to adjust the value of the primary colour of green
Blue: Press “5” and “6” button to select Blue, then press MENU button to confirm the choice and press “3” and
“4” button to adjust the value of the primary colour of blue.

2.2.4 OSD

1. Press -/+ button to select OSD in the main menu, then press MENU button to enter.

2. You can also enter OSD menu from the Main menu.

HORIZONTAL POSITION

It allows the changing of horizontal position of the display image. Press “3” and “4” buttons to horizontally move the
image.

VERTICAL POSITION
It allows the changing of vertical position of the display image. Press “3” and “4” buttons to vertically move the

image.

TRANSPARENCY

It allows the setting of the OSD transparency time on the screen. Press “3” and “4” buttons to change the values of
this parameter.

OSD TIMEOUT

It allows the setting of the OSD duration time on the screen. Press “3” and “4” buttons to change the values of this
parameter.

2.2.4 Setup Menu

1. Press -/+ button to select Setup in the main menu, then press MENU button to enter.

2. You can also enter Setup menu from the Main menu.

Language

Press 5” and “6” button to select Language, then press MENU button to confirm the choice .
Press 5” and “6” button to select required language, then press Auto button to return to the previous menu.
Language: English, Italiano, 한국의 , 简体中文, Español, Deutsch, Français ,

Mute:

Press 5” and “6” button to select Mute, then press MENU button to confirm the choice and enter the sub-menu.
Press 5” and “6” button to choose on/off.

Input:

Press 5” and “6” button to select Input, then press MENU button to confirm the choice and press “3” and
“4”button to choose VGA, DVI or HDMI.

DCR:

Press 5” and “6” button to select DCR, then press MENU button to confirm the choice and press “3” and “4” button
to choose ON or OFF.
This item can judge the picture’s overall brightness automatically; it will make different homochromy step level
return to original state, and allow the details and level of picture be clearer and sharper by weakening the dark
region brightness.

4. LED MONITOR QUALITY AND PIXEL

The TFT monitor uses high-precision technology, manufactured according to industry standards, to guarantee
trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or
dark spots. This a common matter related to the specific nature of TFT technology which determines the possible
presence of discontinuity on the screen and is not specific to products.

5. PRODUCT SPECIFICATIONS

Display Specification

Panel Type

19.5'' (16:9) LED
Backlit Monitor

21.5'' (16:9) LED Backlit
Monitor

24'' (16:9) LED Backlit
Monitor

Case Type

Plastic

Best Resolution

1600 (H) x 900 (V)

1920 (H) x 1080 (V)

1920 (H) x 1080 (V)

Active Display Area

432 (H)x 243 (V) mm

476.64 (H) x 268.11 (V)
mm

531.36(H) x 298.89 (V)
mm

Pixel Pitch

0.27 (H) x 0.27 (V) mm

0.248 (H) x 0.248 (V) mm

0.277 (H) x 0.277 (V)
mm

Contrast Ratio

1000:1

Brightness

250 cd/m²

Response Time

5ms

Viewing Angle

U/D: 80° / 80°, L /R: 75° / 75°

Display Colours

16.7 Million

PC Compatible
Frequency

30-80KHz(H) / 50-75Hz(V)

Adjustable Colour
Temperature

9300K / 6500K / 5800K / User

Video Compatibility

Multi-Standard for NTSC / PAL

Aspect Ratio

16: 9

Speaker Multimedia
Speakers

Right x 1 Left x 1, 2.5W

Sound Demodulation

Stereo. Audio

Mute

Yes

Operating Humidity

20 % - 70 %

Operating Temp.

- 10 to 50 °C

IN/OUT INTERFACE

Video Interface

HDMI x1, DVIx1 , VGA x 1

Audio Interface

Audio in x 1,Audio Out x 1,

Power Interface

DC In x 1

Termination

75 Ohms (Automatic termination)

Safety & EMC
Certification

Energy Star / CE / FCC / ROHS /WEEE

Stand Type

Desktop

Colour

Black

Button Position

Right Hand Side

NET/Gross Weight

2.8/3.3 KG

3.5/4.1 KG

4.0/5.2 KG

POWER

Power Supply

12VDC, 3 Amp

Voltage

AC100 - 240V 50 / 60Hz

Power Consumption

<19W

<23W

<28W

Important note: Product specifications may be subject to change without prior notice.