Vigilant Vision 9.7” User Manual

9.7” LED MONITOR

Contents

1. Safety instruction

2. Contents in the products

3. Safety tips

4. Installation

5. Product Specification

6. Signal connection

7. How to control OSD (On screen display) key

1) Input signal : Video, HDMI

2) Input signal : PC (for DVR or PC usage)

8. FAQ

2

3

4

5

6

7

8

9

12

16

- 1 -

1. Safety Instructions

Thank you for purchasing our security LCD monitor.
For the best performance of our product, please take a few minutes to
read the user’s manual and follow relevant guides and directions.

■ Please read the instructions carefully, and keep it for later use.

■ Please comply with all warnings and instruction signs marked on the product.

■ Always keep the product under normal temperature and humidity, avoiding
heavy moisture and high temperature.

■ Keep the product stable conditions at any time, otherwise the product may fail,
causing serious loss and damage.

■ Do not install this product without any proper ventilation system, and keep the
product away from all heat sources, humid and dusty surroundings.

■ When cleaning, cut off the electrical supply at any times, and keep away from any
liquid sources. Use damp rag to clean product when necessary instead of liquid
or aerosol detergent

■ Do not crash and convulse the product when move it because the product as
glasswork is easily scratched.

■ Do not attempt to repair the product by yourself or remove the casting, if may
expose you to electronic shock hazard. Please contact a dealer near you for the
service.

- 2 -

2. Contents in the product

Inspect all the items inside the box. If any item is damaged or miss­ing, notify your dealer immediately.

- 3 -

LED monitor

3. Safety Tips

■ Place the monitor on a flat and stable surface

■ Ensure that the power to the monitor, the computer, and other connected devices
should be off before making any connections.

■ Plug the DC cord of the AC adapter to the 12V power connector of the monitor.

■ Plug power cord to the AC adapter, and plug the other side to the power socket.

■ Please use the enclosed power cord and connect to the standard power outlet of
your country.

■ For viewing clarify, you can tilt the LCD forward or backward.

■ Ensure the LCD will not fall or be damaged.

■ Do not tilt the LCD beyond the allowed angles forward up to 5 degrees or
backward up to 25 degrees.

- 4 -

4. Installation

■ Connect power cord and power adaptor

■ Connect video cable

- Make sure both the LCD display and computer are turned off.

- Connect the video cable from the LCD display to the computer.

■ Turn on LCD display and computer.

■ Select input source (video, PC, HDMI) pushing ‘SELECT’ button of OSD.

- 5 -

AV OUT AV IN VGA HDMI DC IN

5. Product Specification

※ Technical details may be subject change without further notice.

Features

Model

LCD

Resolution

Viewing angle

Brightness

Contrast

Input signals

Output signal

Power

Size (WxHxD)

Weight (set)

Weight (Packed)

9.7inch

9.7″LED monitor(4:3)

1024 x 768@60Hz

178/178 (degree)

200 cd/㎡

600:1

PC (RGB), Video (BNC),

HDMI

Video(BNC)

DC 12V 2A

235mm x 195mm x

320mm

1.7Kgs

2.5 Kgs

Specification

- 6 -

6. Signal connection

Parameter

PC input

HDMI input 480P/576P/720P

1080I/1080P

Composite video input Vp-p

Vp-p

1

1

Composite video output

Input signal

Input level

Input Resolution

H-Frequency

V-Frequency

Max, input resolution

Analogue R,G,B

Separate

0.7

31 ~ 80

60 ~ 75

1280 x 1024@75Hz

Vp-p

KHz

Hz

75Ω

Pal / NTSC / Secam

With HDCP

Specification Unit Remark

VGA plug Pin PinFunction Function

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Red

Green

Blue

Unconnected

Grounded

Red grounded

Green grounded

Blue grounded

VGA_5V

Synchronization grounded

Unconnected

SDA (DDC Data)

Horizon synchronization

Vertical synchronization

SCL (DDC clock)

VGA Connector

Various input/output signal specifications are supported.
The following table shows the input/output signal specifications.

- 7 -

7. How to control OSD (on screen display) Key

To choose input signal : Video, PC, HDMI

To enter the sub-menu

To view the next function in the OSD main menu

To activate the OSD main menu

To view the previous function in the OSD main menu

To exit from the OSD main menu

Auto adjust (hot key) in the PC mode

OSD item UP

To increase the value of the specific function which has been selected

To adjust contrast / Brightness (Direct menu)

OSD item DOWN

To decrease the value of the specific function which has been selected

To turn on / off the monitor

Key function

Select

Menu

Up

Down

Power

Up Down Select Menu Power

OSD Key function

LED color status

Mode

LED color

ON

Green

Stand by

Orange

OFF

Orange

- 8 -

7-1. Input Signal : Video / HDMI

(Choose‘Select’button from OSD key)

(1) Menu : PICTURE

■ Contrast : To adjust the brightness and darkness of the object and backgrounds

■ Brightness : To adjust the brightness of the entire picture.

■ Hue : To adjust colors naturally. This function is activated at NTSC video signal.

■ Saturation : To adjust colors to deeper or lighter color

■ Sharpness : To adjust the sharpness of video image.

■ Color temp

- Normal : For a general color tone

- Warm : For warm colors with reddish tone

- Cool : For cool colors with bluish tone.

- 9 -

7-1. Input Signal : Video / HDMI

(2) Menu : FUNCTION

■ Scaling

- 4:3 (Normal ) : For general picture size.

- Zoom : Zoom in vertical direction.

■ Picture mode

- Standard : For general contents. If fits most contents.

- Vivid : For a clear display.

- Movie : For movies.

- User : When the user wants to set the values.

■ Sleep timer : Select the sleep timer if you want automatically power off on a certain time.

■ Key lock : To lock the key function. If you need the key function again, please do AC power
off and on.

**

Pixel shift( ) : This function is to reduce the retention of image.

- 10 -

9.7″

7-1. Input Signal : Video / HDMI

(3) Menu : OSD

■ Language : To select the preferred language.

- English, German, French, Italian, Spanish, Czech, Swedish, Finnish, Polish, Russian,
Turkish,Korean, Japanese

■ H-position : To adjust the horizontal position of OSD window.

■ V-position : To adjust the vertical position of OSD window.

■ OSD timer : To adjust the time of OSD window display.

■ Transparent : To adjust the transparency of OSD window.

■ Recall : To recall the initial setting.

- 11 -

7-2. Input Signal : PC (for DVR or PC usage)

(Choose‘Select’button from OSD key)

(1) Menu : FUNCTION

■ Sleep timer : Select the sleep timer if you want automatically power off on a certain time.

■ Key lock : To lock the key function. If you need the key function again, please do AC power
off and on.

**

Pixel shift( ) : This function is to reduce the retention of image.

- 12 -

9.7″

7-2. Input Signal : PC (for DVR or PC usage)

(2) Menu : PC

■ Contrast : To adjust the brightness and darkness of the object and backgrounds

■ Brightness : To adjust the brightness of the entire picture.

■ H-position : To adjust the horizontal position of picture.

■ V-position : To adjust the vertical position of picture.

■ Clock : To adjust to reduce the noise on the picture.

■ Phase : To eliminate the shake of the picture.

■ Color mode : To select color tone of the entire picture.

- Normal : For a general color tone.

- Warm : For warm colors with reddish tone.

- Cool : For cool colors with bluish tone.

- User : For adjusting the color tone with R. G. B control.

■ Auto color : To adjust color (brightness / contrast, etc) automatically.

■ Auto adjust : Horizontal / vertical positions are automatically adjusted.

- 13 -

7-2. Input Signal : PC (for DVR or PC usage)

(3) Menu : OSD

■ Language : To select the preferred language.

- English, German, French, Italian, Spanish, Czech, Swedish, Finnish, Polish, Russian,
Turkish, Korean, Japanese

■ H-position : To adjust the horizontal position of OSD window.

■ V-position : To adjust the vertical position of OSD window.

■ OSD timer : To adjust the time of OSD window display.

■ Transparent : To adjust the transparency of OSD window.

■ Recall : To recall the initial setting.

- 14 -

7-2. Input Signal : PC (for DVR or PC usage)

※Timing Guide in PC mode

640 x 480

640 x 480

720 x 400

800 x 600

1024 x 768

31.469

37.500

37.861

31.469

37.879

48.077

46.875

48.363

56.467

60.023

59.940

75.000

72.809

70.087

60.317

72.188

75.000

60.004

70.069

75.029

PC

Resolution Mode

H-Frequency

(kHz)

V-Frequency

(Hz)

- 15 -

8. FAQ

- Make sure AC power cord is securely connected to the LCD Adapter.

- Make sure that the monitor power is turned on.

- Check the signal source : Video, HDMI, PC

- You can push the‘SELECT’button of the OSD key to choose suitable
signal input.

- Check if the VGA signal cable is properly connected and check if
the plug pin was damaged.

- Check if the computer is changed to power saving mode, press any
key

- Adjust the brightness.

- Adjust the contrast.

- Presss the“ UP”(Auto adjust in PC mode) key

- Do adjust the values in the menu

- Presss the“ UP”(Auto adjust in PC mode) key

- Adjust horizontal / vertical position

- Check whether signal timing is within the specified limits.

- Check whether VGA (Video, HDMI) cable is properly connected.

- Adjust the color in the menu.

No power light

No signal

Monitor in Power saving mode

Too bright or dark

Fuzzy image

Image not in the middle

Abnormal color

Symptioms Solutions

- 16 -