Vigilantplant DS104PCT User Manual

Table of contents

Safety Information----------------------------------------------------2- 3

Care and Cleaning----------------------------------------------------4

Contents-----------------------------------------------------------------4

Installation---------------------------------------------------------------4

Connecting the Monitor---------------------------------------------5

Basic OSD Setup---------------------------------------------------5~ 8

USB Touch Driver User Guide For Windows XP--------9~16

Important Safety Information

Read and understand all safety information before using this product. Follow
all instructions marked on the product and described in this document. Pay
close attention to the following installation warnings and safety precautions.
Intended Use
This monitor was designed for BUS to replace an existing monitor. These
monitors are intended for indoor use only and are not designed for use in
BUS locations.

Explanation of Signal Word Consequences
DANGER: To avoid the risk of fire and/or explosion which will result in
serious injury or death: Do not install or use this product in a hazardous
location.
WARNING:To avoid the risk of fire which could result in serious injury
or death:Do not remove the cover or back of the monitor.
CAUTION:To avoid the risk of electric shock which could result in
serious injury or death:

•This device must be operated with the original power supply,

•Do not use a damaged power supply.

•Do not use a power cord that is frayed or otherwise damaged.

CAUTION:To avoid the risk of electric shock which may result in minor
or moderate injury:

•The socket-outlet should be installed near the equipment and should be
easily accessible.

•Use a power cable that is properly grounded. Always use the appropriate
AC cord certified for the individual country. Some examples are listed below:

•Do not service the monitor Do not remove the cover or back of the
monitor.There are no user serviceable parts inside. Refer all servicing to
qualified service personnel. The backlight inverter output is at high voltage.

•Do not use non-conforming replacement parts.

•Do not expose the monitor to rain or other sources of water,steam,or

moisture.

•Do not place foreign objects on the monitor or its cables.

CAUTION: To avoid the risk of minor or moderate personal injury or
damage to the monitor:

• Never wall-mount the monitor without the locking mechanism in place.

• Use an anchoring system appropriate for the weight of the product.

1

2

• Consult a construction professional before attempting to hang the unit on
the wall.

To avoid the risk of glass breakage which may result in minor or
moderate injury:

• Handle the monitor with care to avoid breaking the touch screen sensor.
The display contains glass parts. Dropping the display may cause the glass
parts to break.

• Do not place foreign objects on the monitor.

Important Notes:

•Plug power cord into appropriate power source & a grounded receptacle.

•When unplugging power supply cord, pull on plug not cord.

•Do not connect or disconnect this product during an electrical storm.

•Install the display in a well-ventilated area. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable
and continued operation.

•Do not expose this display to heat. Passive heat may cause damage to the
case and other parts.

•Do not install this display in areas where extreme vibrations may be
generated.For example, nearby manufacturing equipment may produce
strong vibrations. The vibrations may cause the display to exhibit picture
discoloration or poor video quality.

•Product weight varies from 10 to 24 pounds depending on the packaging,
use caution when lifting.

• Ensure that metal does not contact the touch screen.
To avoid ergonomic concerns:

Do not install the monitor in a manner or location with awkward
accessibility.Extended use may result in muscle, tendon, or fixed posture
strains. It is recommended you take periodic breaks from continuous use.

CAUTION：To avoid the risk of electric shock which may result in
minor or moderate injury:

Liquid is spilled into the product or the product is exposed to rain or water.

The product does not operate properly when operating instructions are
followed.

•The product has been dropped or the case has been damaged.

•The product shows a distinct change in performance, indicating a need for

service.

Care and Cleaning

CAUTION: Turn off your MONITOR before cleaning.

You can clean the MONITOR as required, using a soft lint-free cloth. Be sure
to occasionally dust the ventilation slots in the cabinet to help assure
adequate ventilation.
The MONITOR’s screen may be cleaned with a soft, lint-free cloth as well.
Take care not to scratch or mar the screen. If necessary, you may use a
cloth dampened with warm water. While cleaning do not spray liquid directly
on the screen, or allow liquid to run down the screen and inside the Monitor.
Also, never place drinks or vases with water on top of the monitor. This could
increase the risk of fire or shock hazard or damage to the monitor.

Contents

Please check the following listed accessories before installation:

Monitor X1

User manual X1

Power Supply X1
VGA Cable X1

Installation

Rear interface

(1) DC12V：Mains power input

(2) VGA：Plug the D-type15 pin VGA interface into the VGA video Interface

of the Application, and the other end into the LCD monitor’s VGA

connector. Fasten the screw.
(3) HDMI/DVI :Lets you connect a device, such as a digital cable box, with
an HDMI or a DVI output. HDMI( High Definition Multimedia Interface)

3

4