Vifa VIFA070, Reykjavik Quick Manual
Bluetooth
14:52
Bluetooth
Paired
3
1 3
1 2
4 2
BUTTONS AND INDICATORS
BATTERY CHARGE CONNECTING WITH BLUETOOTH CONNECTING WITH BLUETOOTH WIRED CONNECTION WIRED CONNECTION SPEAKER PHONE SPEAKER PHONE
Answer/Terminate call
Mute/Pause
MODE button with
status indicator
Volume
Reset
Battery indicator
USB-C Charge Socket
AUX Socket
Stereo
Left channel
Right channel
To turn Reykjavik on, press
and hold the MODE button
until status indicator turns
solid WHITE.
* To turn off, press and hold the MODE
button until the status indicator ashes
WHITE. Then release.
*During music streaming, press the
Mute/Pause button to Mute/Unmute
music.
*During music streaming, press the
Mute/Pause button to play/pause music.
Enable Bluetooth pairing
on your device and select
VIFA_REYxxxxxx as your
Bluetooth device.
Press and hold the MODE
button until status indicator
ashes BLUE.
The status indicator turns
solid BLUE when a
connection is established.
To turn Reykjavik on, press
and hold the MODE button
until status indicator turns
solid WHITE.
Connect the wire,
( USB-C or AUX ) and
start music playback from
your device.
The status indicator turns
solid GREEN when wired
playback is enabled.
To charge, plug USB-C cable
in USB power adapter or
computer and connect to your
speaker. Light indicator shows
the charging progress.
*Please note that power adapter is not
included with the product. When not charging
and battery level is below 5%, the battery
indicator will light up.
Above 95%
Between 80 and 95%
Between 15 and 80%
Below 15%
Receive incoming call
The status indicator ashes
GREEN. Briey press the
Answer/Terminate call
button.
Reject incoming call
Press and hold the
Answer/Terminate call
button.
Terminate a call
Briey press the Answer/
Terminate call button again.
Mute a call
During a call, briey press
the Mute/Pause button
to mute or unmute the
microphone. The status
indicator ashes WHITE
when muted.
Link button with integrated indicator
2017_10_31_Vifa Reykjavik_QuickGuide_UK_V2.4.indd 1 31-10-2017 14:43:07
2
1
LINK TWO REYKJAVIK SPEAKERS LINK TWO REYKJAVIK SPEAKERS REGISTER AND TRADEMARKS SPECIFICATIONS SPECIFICATIONS SUPPORT
Portable wireless loudspeaker
Bluetooth
®
Wireless Technology
AUX 3.5 mm mini jack
USB playback
Lithium Ion battery
DSP crossover, optimized
for low distortionand high
precision
3 channel digital amplier
LINK two speakers
Speaker phone
(Incl noise/echo cancelling)
Bluetooth
®
AUX 3.5 mm mini‐jack
USB-C
2 X 19 mm Vifa drive units
with coated fabric dome
and neodymium magnet
70 mm Vifa drive unit with
aluminum cone and neodymium
magnet
62 Hz – 20 kHz @ +/- 3 dB
USB, 5V.
After 3 minutes without signal
After 30 minutes without signal
Lithium-Ion 19Wh
65 mm / 139 mm
0.6 kg
Custom made Kvadrat textile,
anodized aluminum
Description
Technical features
Inputs
Tweeter
Woofer
Frequency response
Input voltage
Sleep mode
Automatic off
Battery, internal
Height/Diameter
Net weight
Grilles
Support
If you experience issues that are not described
in this quick-guide, please refer to
vifa.dk/support for more information
Register your Reykjavik
We encourage you to register your speaker at
vifa.dk/support
2017 10 Rev. 2.4
IN THE BOX
USB-C cable
Safety instructions
and warranty
Quick guide
1x Reykjavik + Travel bag
Make sure the two Reykjavik
speakers are turned ON.
Briey press the Link button on
one speaker (primary) until Link
indicator ashes YELLOW.
Repeat on the other speaker
(secondary).
When both speakers are linked,
their Link indicators become
solid YELLOW, showing they are
linked as stereo speakers.
*When the secondary speaker is
linked, it plays primary speaker’s
music.
To change to Left/Right channel,
briey press Link button. To break the
Link, press and hold Link button.
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc., and any use of
such marks by
Vifa Denmark A/S is under license.
REYKJAVIK
Quick guide
Model: VIFA070
2017_10_31_Vifa Reykjavik_QuickGuide_UK_V2.4.indd 2 31-10-2017 14:43:07
Loading...