How it Works
ViewZ
Loading...
VZ-CM308B
Installation Instructions
10 pgs1.32 Mb0
Specsheet
3 pgs739.97 Kb0

ViewZ VZ-CM308B, VZ-CM308W Installation Instructions

Download
Page 1
VZ-CM308
Telescopic Ceiling Mount with length, rotation and tilt adjust
VZ-CM308 series INSTALLATION INSTRUCTIONS
VZ-CM308-B (for Black Color)
VZ-CM308-W (for White Color)
VZ-CM-EB (Optional Extension Pole set for Black Color)
VZ-CM-EW (Optional Extension Pole set for White Color)
Page 2
Contents
CM 308 series
Weight Limit 2 Warning Statements 2 Ceiling Mount info 3 Assembly Component List 3 Features 5
Warranty 10
.........................................................................................................................................................................................................
............................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................
.................................................................................................................................................................................................................
............................................................................................................................................................................................
...............................................................................................................................................................................................
......................................................................................................................................................................
.............................................................................................................................................................................
...............................................................................................................................................................................................................
Weight Limit
Maximum Monitor Weight:
66.1 lbs
6Installing the Mount 7Leveling the Pole 7Mounng Monitor-Bracket to Pole 9Installing Monitor to the Pole
Warning Statements
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS PERSONAL INJURY, OR EVEN DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
ViewZ USA DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY ViewZ USA PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.
At least two qualied people should perform the assembly procedure. Personal injury and/or property damage can result from dropping or mishandling the at-panel.
If mounng to wall studs or ceiling studs, make sure that the mounng screws are anchored into the center of the wall studs or ceiling studs. Use of an edge-to-edge stud nder is recommended.
Using replacement parts or accessories other than from the manufacturer may void the warranty.
Be aware of the mounng environment. If drilling and/or cung into the mounng surface, always make sure that there are no electrical wires in wall. Cung or drilling into an electrical line may cause serious personal injury.
Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cung or drilling into a water or gas line may cause severe property damage or personal injury.
This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious personal injury.
Do not install near sources of high heat. Do not install on a structure that is prone to vibraon, movement or chance of impact.
Contact ViewZ with any quesons: (888) 998-4399
techsupport@viewzusa.com
Page 3
CM 308 series
Telescopic Ceiling Mount Info
This bracket is designed to mount a monitor from the ceiling structure. It can be used with the exisng truss structure of the building or in conjuncon with a channel strut. There are four lengths of brackets available.
• Part #
• Part #
• Part #
• Part #
VZ-CM308-B
VZ-CM308-W
VZ-CM-EW
VZ-CM-EB
Length of 3' to 8'
Length of 3' to 8'
Length of 3' to 5.2' Oponal Extension Pole Set
Length of 3' to 5.2' Oponal Extension Pole Set
Installation Tools
The following tools may be required depending on your installaon.
Electronic Stud Finder
Protecve Eye-wearPencil Phillips Screwdriver Level Portable Drill / Bit Socket Wrench
Assembly Components
Your ViewZ mount product is shipped with all proper installaon hardware and components. If there are parts missing and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.
Monitor Hold Bracket (1 pc.)
A
Wall/Ceiling Mount Bracket (1 pc.)
D
B
Monitor Hold Bracket (2 pc.)
E
C
F
Top Pole (1 pc.)
Middle Pole (1 pc.)
Boom Pole (1 pc.)
3Installation Instructions Visit the ViewZ USA website at http://www.viewzusa.com
Page 4
Assembly Components (cont’d)
M4 x L15 mm Screw (Qty 4)
CM 308 series
M8 x L55 x φ 10
G N
(Qty 2) - 8.8 grade φ 16 x φ 8.2 x 1.5 Washers (Qty 4)
M5 x L15 mm Screw (Qty 4)
M6 x L15 mm Screw (Qty 4)
φ 16 x φ 6.2 x 1.5 Washers (Qty 4)
M6 x L12 mm Screw (Qty 4)
φ 44 x φ 38.5 x 2.0 Washers (Qty 1)
M6 x L10 mm Lock Screw (Qty 2)
H O
M8 x L50 x φ 10 (Qty 4) - 8.8 grade
I P
M8 Lock Nut (Qty 6)
J Q
Open Wrench (Qty 1)
K R
6 mm Allen Wrench
(Qty 1)
M8 x L70 x φ 10 (Qty 4) - 8.8 grade
L S
φ 16 x φ 8.2 x 1.5 Washers (Qty 4)
M
Anchor (Qty 4)
T
M12 x L100 x φ 17 (Qty 1) φ 20 x φ 12.5 x 2.0 Washers (Qty 2)
U
M12 Lock Nut (Qty 1)
V
Page 5
8.03 ft / 96.45” / 2450 mm (Max) ~ 3.08 ft / 37.0” / 940 mm (Min)
18 ft (Max) ~ 3.08 ft / 37.0” / 940 mm (Min)
CM 308 series
Features
Extension Pole Configuration / Tilt, Swivel
D DD
E EE
Tilng 0-90°
D DF
13 ft (Max) ~ 3.08 ft / 37.0” / 940 mm (Min)
E E
8 ft
(Basic)
F D
13 ft
(Optional)
E
PAN Rotaon 360°
F
18 ft
(Optional)
Tilng -5° ~ +45°
Tilng ± 5°
5Installation Instructions Visit the ViewZ USA website at http://www.viewzusa.com
Page 6
Installation
CM 308 series
Securing Mount to Building
1) Mount Wall/Ceiling mount bracket (B) with screw & washers (U)
2) Tighten the M12 (V) lock nut using a open-wrench
3) Insert screw to Wall/Ceiling mount bracket with wahsers when you
setup the position of top pole.
4) You can adjust pole angle between 0⁰ and 90⁰.
5) Tighten the M8 lock nut using a open-wrench.
V Lock Nut
B Wall/Ceiling Mount Bracket
N Screws & Washers
B Wall/Ceiling Mount Bracket
D Top Pole
Q Open Wrench
U Screws
U Washers
N Washers
P Lock Nut
Secure Mounting to Brick/Concrete or Wood
Brick or Concrete Wall/Ceiling Mounting
1) Insert anchors to truss or channel strut (brick, concrete or wood)
2) Insert screw to Wall/Ceiling mount bracket with wahsers rod between
truss gap or hole in channel strut.
3) Place washer over the threaded rod and then tighten using wrench.
Wood Mounting
1) Insert screw to Wall/Ceiling mount bracket between truss gap or
hole in channel strut.
Caution: Please be extra cautious when finding a mountable
position in the ceiling. Dry-wall or weak-wood material
cannot bear the weight of pole & monitor.
Wood
Brick or Concrete
V Lock Nut
S Screws & Washers
T Anchors
U Screws & Washers
Truss / Channel Struct
V Lock Nut
U Screws & Washers
S Screws & Washers
Page 7
CM 308 series
Installation
Leveling the Pole (Top & Middle)
1) You can ensure the pole is properly aligned by tightening the lock screws/nuts between top & middle, middle & bottom poles.
2) Place a level on poles(top & bottom) and tighten the screws/nuts (see illustration on the right).
3) Check and adjust 2 adjacent sides of the pole until it is plumb in each
direction.
Mounting Monitor-Hold-Bracket(Vesa Plate) to Pole
O Screws
E Middle Pole
D Top Pole
P Lock Nut
Q Open Wrench
1) Hold the bottom pole and put 1-3/4" washer between vesa brack and bottom pole (see illustration on the right).
2) Gently push the vesa bracket to bottom pole. Vesa bracket is bigger than bottom pole circumference
3) You can rotate vesa plate before locking. If you have a desired
direction for the plate, please rotate vesa bracket.
4) After setting the position, use M6xL10 lock screws and lock the vesa
plate.
*NOTE: Avoid over-tightening which can cause the pole to cave.
E Monitor Hold
Bracket
L φ 44 x φ 38.5 x 2.0
mm Washer
F Boom Pole
M M6xL10 lock
screws
7Installation Instructions Visit the ViewZ USA website at http://www.viewzusa.com
Page 8
Installation
CM 308 series
Leveling Pole (Bottom & Middle)
1) You can ensure the pole is properly aligned by tightening the lock screws/nuts between middle & bottom poles.
2) Place a level on poles (middle & bottom) and tighten the screws/nuts (see illustration on the right).
3) Check and adjust 2 adjacent sides of the pole until it is plumb in each
direction.
E Middle Pole
O M8 x L50 Screws
Q Open Wrench
P M8 Lock Nut
F Boom Pole
Rotation
1) Hold the lower pole (where it connects to the monitor) and turn two lock screws counter-clockwise to loosen the VESA plate (see
illustration on left below). Then, rotate vesa plate to set the position.
2) Once set in a desired position, lock the two lock-screws by turing
clockwise.
Le Loosen
Hold lower pole secon, turn two lock-screws as counter­clockwise to rotate vesa plate
Right Tighten
Hold vesa plate posion and turn two lock-screws as clockwise to set the posion
Page 9
CM 308 series
Installation
Direct Installation
1) Applicable VESA pattern - 50 x 50, 75 x 75, 100 x 100, 200 x 100 If your monitor supports a VESA plate already mounted on the back, simply ensure the four M4/M5/M6 screws are in place and tightened. If the mount is not already attached, connect it using the supplied M4/M5/M6 VESA screws (4-places).
Caution: Some installations may require running power and video cables prior to attaching the monitor bracket to the pole. If
this is the case, do so before continuing to step 2.
Caution: Some monitors require specific length of screws. Please check the affordable screw length before installing.
2) Install the M4 x L15 mm screw, washers, and monitor-hold bracket (if necessary) into the upper slotted hole according to the illustration on the right. You will need to use Phillips screwdriver or mobile screwdriver to fully tighten in the next step.
3) Tighten the fasteners to secure the monitor at the desired angle.
*NOTE: Avoid over-tightening which can cause monitor damage
G, H, I Screws
Monitor Hold Bracket Installation
1) Applicable VESA pattern - 200 x 100, 200 x 200 (Optional 400 x 400 available)
Max Load:
66.1 lbs / 30.0 kg
This stand is intended for use only with products that are lighter than maximum weight indicated. Usage with products heavier than the maximum weight indicated may result in instability causing possible injury. This product is intended to mount to a steel support truss, or channel strut (Brick, Concrete or Wood)
G, H, I Screws J Washer
C - Monitor Hold Bracket
9Installation Instructions Visit the ViewZ USA website at http://www.viewzusa.com
Page 10
CM 308 series
Warranty
ViewZ USA
LIMITED LIFETIME WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
ViewZ USA warrants this product to be free from defects in material and workmanship for the lifeme of the original owner of this product. The limited warranty is valid only for the original purchaser of the product.
What ViewZ USA Will Do
At the sole opon of ViewZ USA, ViewZ USA will repair or replace any product or product part that is defecve. If ViewZ USA chooses to replace a defecve product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor
costs.
What is Not Covered; Limitaons
ViewZ USA DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS
PRODUCTS.
ViewZ USA DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ViewZ USA IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in wring to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a descripon of the problem, the purchaser’s name, address, and telephone number. General inquiries can be addressed to ViewZ USA Customer Service at 1-888-998-4399. Warranty claims will not be accepted over the phone or by fax.
ViewZ USA
An: Warranty Claim
177 W. Orangethorpe Ave.
Placena, CA 92870
How State Law Applies
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Disclaimer
ViewZ USA intends to make this manual accurate and complete. However, ViewZ USA makes no claim that the informaon contained herein covers all details, condions or variaons, nor does it provide for every possible conngency in connecon with the installaon or use of this product. The informaon contained in this document is subject to change without noce or obligaon of any kind. ViewZ USA makes no representaon of warranty, expressed or implied, regarding the informaon contained herein. ViewZ USA assumes no responsibility for accuracy, completeness or suciency of the informaon contained in this document.
Contact Us
NORTH AMERICA
177 W. Orangethorpe Ave.
Placena, CA 92870 USA and Canada Phone: 1-888-998-4399 Fax: 1-714-996-1138 Other Locaons Phone: (001) 888-998-4399
© ViewZ USA
Fax: (001) 714-996-1138
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use