ViewZ VZ-AP200-W, VZ-AP200 User Manual

VZ-AP200
VZ-AP200-S1

50x50,75x75
100x100,200x100
200x200

Display 24”~32”

NOTE: Read the entire instruction manual before you start installation and assembly.

WARNING

• Do not begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local distributor.

• This mounting bracket was designed to be installed and utilised ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.

• Tighten screws firmly, but do not over tighten. Over tightening can cause damage
to the items, This greatly reduces their holding power.

• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.

Component Checklist

1. Attaching the Adapter Plate to the Mounted Head

75mm

50mm

100mm

50mm

75mm

100mm

200mm

The adapter plate is only compatible with VESA 50x50/75x75/100x100 mounted head.

200mm

IMPORTANT: Ens ure t ha t you h ave r ec eiv ed al l pa rts a cco rd ing t o the c om pon ent c he ckl ist p ri or to i nst al lat ion .

If an y pa rts a re mi ss ing o r fau lt y, tel eph one y ou r loc al di st rib uto r fo r a rep lac em ent .

adapter plate (x1)

A

M5x16 ( x4 )

B

M5 nut (x 4)

C

Package M

M6x14 ( x4 )

M-A

M8x20 ( x4 )

M-B

D8 wash er ( x4)

M-C

small s pa cer (x8 )

M-D

A

C

B

Attach the adapter plate to the mounted head using appropriate screws and nuts so that the hole pattern can
be expanded to Max VESA 200x200.

21