ViewZ vz19rtld Instruction Manual

17/19-INCH

TFT-LCD MONITOR

INSTRUCTION MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

SAFETY INSTRUCTION …………………………………………………………………..

2 ~ 3

CAUTIONS ………………………………………………………………..........................

4

FCC RF INTERFERENCE STATEMENT ……………………………...........................

5

CONNECTING WITH EXTERNAL EQUIPMENT ……………………………………….

6

REMOTE FUNCTIONS ……………………………………………………………………

7

CONTROLS AND FUNCTIONS …………………………………………………………..

8 ~ 11

MOUNTING GUIDE ………………………………………………………………………..

12

D-SUB CONNECTOR PIN ASSIGNMENTS …………………………………………….

13

POWER MANAGEMENT ………………………………………………………………….

14

SPECIFICATIONS ………………………………………………………………………….

15

TROUBLE SHOOTING GUIDE …………………………………………………………...

16

INSTRUCTION MANUAL ……………………………………………………………………. 1

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Important Safety Instruction

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as radiators, heat registers,stoves, or other
apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

Apolarized plug has two blades with one wider than the other.
Agrounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the
bsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.

11. Only use attachment/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or
moisture does not operate normally or has been dropped.

2 ……………………………………………………………………. INSTRUCTION MANUAL

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed no the apparatus.

- Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation.

“WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.”

“The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.”

This symbol is intended to alert the user to the presence of uninsulated :
dangerous voltage with in the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating
and maintenance(servicing) instructions in the literature accompanying the
appliance.

INSTRUCTION MANUAL ……………………………………………………………………. 3

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

CAUTION

The power supply cord is used as the main disconnect device, ensure that the socket-outlet is
located/installed near the equipment and is easily accessible.

ATTENTIONN

Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être
située ou installée à proximité du matériel et être facile d`accès

▶ NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

▶ DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent shock or fire hazard, do not expose the unit to rain or moisture.
This unit is designed to be used in the office or home. Do not subject the unit to vibrations,
dust of corrosive gases.

▶ KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising.
Do not cover the unit or place anything on the top of unit.

▶ AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

▶ TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground and where sunlight or other light sources will
shine directly on the monitor.

▶ BE CAREFUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.

4 ……………………………………………………………………. INSTRUCTION MANUAL

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio, TV technician for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by
the grantee or manufacturer could void the users authority to operate such equipment.

▶ DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulation of Canadian Department of
communications.

INSTRUCTION MANUAL ……………………………………………………………………. 5

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

A. BOTTOM PANEL CONTROL

1. DC12V

2. PC AUDIO

3. PC-RGB

PC Analog(VGA) Input

4. DVI

PC Digital Input

6 ……………………………………………………………………. INSTRUCTION MANUAL

1 2 3

4

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

B. REMOTE CONTROLLER (Option)

1. POWER( )

Turns the power ON or OFF. There will be a few seconds delay before the display appears.

2. SOURCE

Select pc or video( AV1 / AV2 / PC ) sources.

3. APC (Auto Picture Control)

Select picture mode.

4. ACC (Auto Colour Control)

Select Colour mode.

5. AV1

Select AV1 mode.

6. AV2

Select AV2 mode.

7. S-VIDEO

Not operating.

8. PC

Select PC mode

9. AUTO

Auto geometry adjustment in PC Source.

10. MUTE

Mute the sound.

11. MENU

Activates and exits the On Screen Display.

12. EXIT
Exit the On Screen Display.

13. VOL( )

Increases or decreases the level of audio volume.

14. UP/DOWN

Move to OSD menu.

15. ENTER

Accepts your selection or displays the current mode.

16. INFO

Not operating.

17. STILL

Not operating.

INSTRUCTION MANUAL ……………………………………………………………………. 7

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

C. FRONT KEY CONTROL

1. SOURCE /
Select input source, and move the previous menu.

2. MENU

Activates and exits the On Screen Display.
This button can also be used to move previous menu or status.

3, 4. AUTO/▲, ▼

These buttons allow user to move the sub-menu of the activated function.
AUTO/▲ : Auto geometry adjustment.
▼ : Audio mute on or off when disappeared OSD.

5/6. ◀ VOL ▶

Adjust the volume and menu settings.

7. IR Sensor

Remote controller sensor. The remote controller is optional.

8. POWER ON/OFF( / I )

Turn the power ON or OFF. There will be a few seconds delay before the display appears.
The power LED lights with green when the power is turned ON.
The power is turned off by pressing the power switch again and the power LED goes to Red

8 ……………………………………………………………………. INSTRUCTION MANUAL

1 2 3 4 5 6 7

8

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

1. SELF-TEST DISPLAY

When there is no connection at PC, the On Screen Display will show for 3 seconds.

2. OSD MENU DESCRIPTION

2-1 AUTO ADJUST

Adjust screen size when input is Analog(VGA).

2-2. SCREEN

1) BRIGHTNESS
Increase or decrease the intensity of the image.

2) CONTRAST

Increase or decrease the intensity (lightness or

dimness) of the image

3) H.POSITION

Move image horizontally on screen right or left.

4) V.POSITION

Move image vertically on screen up or down.

5) PHASE ADJUST

Remove and horizontal noise and clear up or sharpen the character images.

6) CLOCK ADJUST

Minimize any vertical bras or stripes appearing on the screen background.

INSTRUCTION MANUAL ……………………………………………………………………. 9

POWER SAVING MODE

1280 X 1024 63.9kHz 60Hz

BRIGHTNESS
CONTRAST
H.POSITION
V.POSITION
PHASE ADJUST
CLOCK ADJUST

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

2-3. COLOR

1) COLOR TEMP.

Adjust color temperature to 9300, 6500, user.

2) RED

Adjust red color for user.

3) GREEN

Adjust green color for user.

4) BLUE

Adjust blue color for user.

2-4. UTILITY

1) RECALL

Return to the default settings programmed
at the factory; default setting.

2) FULL AUTO

Adjust color temperature and screen size.

3) INPUT SELECT

Select the Analog(VGA) or Digital(DVI).

2-5. LANGUAGE
The menu displays selected languages.
First, select your language.

10 ……………………………………………………………………. INSTRUCTION MANUAL

1280 X 1024 63.9kHz 60Hz

COLOR TEMP
RED
GREEN
BLUE

1280 X 1024 63.9kHz 60Hz

ENGLISH
FRANCAIS
DEUTSCH
ESPANOL

한국어

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

6. OSD

1) OSD TIMEOUT.

Select the OSD display timing.

2) OSD H.POSITION

Move the OSD position to right or left.

3) OSD V.POSITION

Move the OSD position up or down.

4) OSD TRANSPARENCY

Select the OSD background.

7. AUDIO

1) AUDIO VOLUME

Adjust audio volume.

2) AUDIO MUTE

Mute audio volume.

INSTRUCTION MANUAL ……………………………………………………………………. 11

1280 X 1024 63.9kHz 60Hz

OSD TIMEOUT
OSD H.POSITION
OSD V.POSITION
OSD TRANSPARENCY

1280 X 1024 63.9kHz 60Hz

AUDIO VOLUME
AUDIO MUTE

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Using the VESA standard wall mount design and the 100mm hole pattern on the back panel
to install the LCD monitor to the wall.

Wall-mount Installation (Option)

1. The Monitor fixing bracket to the monitor using the fixing screws provided.

2. The monitor fixing bracket assembled with monitor.

※ Attention!

You must use four M4x10 screws to assemble this monitor and the wall mount bracket.

12 ……………………………………………………………………. INSTRUCTION MANUAL

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

▶ PIN ASSIGNMENTS

Pin 1

RED VIDEO

9

2 GREEN VIDEO

10

SIGNAL CABLE DETECT

3

BLUE VIDEO

11

GROUND

4

GROUND

12

SDA(for DDC)

5

GROUND

13

H-SYNC.(or H+V SYNC.)

6

RED GROUND

14

V-SYNC.

7

GREEN GROUND

15

SCL(for DDC)

8

BLUE GROUND

▶ ACCESSORIES

1. Power cord

2. Power adaptor

3. User’s manual

4. PC cable

5. DVI cable (Option)

6. Stereo cable (Option)

7. Remote controller (Option)

8. Batteries (Option)

9. Wall mount (Option)

10. Rack mount (Option)

INSTRUCTION MANUAL ……………………………………………………………………. 13

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

This monitor features a power management system to “power down” upon receipt of the VESA
DPMS(The display power management signaling) from a VESA DPMS video card.
The VESA DPMS-compliant video card performs this signaling system through not sending
horizontal, vertical, or sync signal.
This monitor enters an appropriate mode through identifying each of the three modes of the
signaling system.

POWER CONSUMPTION

MODE

POWER CONSUMPTION

ON

17”

19”

< 36W

< 42W

STANDBY

< 3W

SUSPEND

< 3W

ACTIV OFF

< 3W

LED INDICATOR
The power management feature of the monitor is comprised of four stages:

On(Green), Standby, Suspend, Active off(Red on/off 1 sec) and Unsupported mode(Green).

MODE

LED COLOR

MONITOR OPERATION

ON

GREEN

Normal Operation

STANDBY

RED

Screen blanks after preset idle time
And some electronic circuits or all
Circuitry in the monitor shut down.

SUSPEND

ACTIV OFF

UNSUPPORTES

MODE

GREEN

Normal operation but the on screen
Display will show error massage

POWER OFF

RED

Not Operation

14 ……………………………………………………………………. INSTRUCTION MANUAL

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

17”

19”

LCD- Type

17˝ Diagonal AM-TFT(Active-Matrix)

19˝ Diagonal AM-TFT(Active-Matrix)

Pixel pitch(mm) : 0.264(H) x 0.264(V)

Pixel pitch(mm) : 0.294(H) x 0.294(V)

BRIGHTNESS: 250cd/㎡(Typical)

BRIGHTNESS: 250cd/㎡(Typical)

CONTRAST RATIO: 1000:1(Typical)

CONTRAST RATIO: 800:1(Typical)

RESPONSE TIME: 5msec(Typical)

RESPONSE TIME: 5msec(Typical)

RESOLUTION

(H x V)

1280X1024 @60Hz

1280X1024 @60Hz

FREQUENCY

HORIZONTAL: 31~64KHz
VERTICAL: 56-75Hz

HORIZONTAL: 31~64KHz
VERTICAL: 56-75Hz

INPUT SIGNAL

DVI D(Digital Video Interface)

PC RGB

PC Stereo Sound

ACTIVE DISPLAY

AREA (W x H)

337.9 mm x 270.3 mm (13.3’’ X 10.64’’)

376.32mm X 301mm (14.82’’ X 11.85’’)

PACKING

DIMENSIONS

(W x D x H)

435mm X 235mm X 472mm
(17.13’’ X 9.25’’ X 18.58’’)

495mm X 235mm X 505mm
(19.49’’ X 9.25’’ X 19.88’’)

WEIGHT

Net Weight : 4.8Kg (10.56 lbs)

Net Weight : 5.1Kg (11.22 lbs)

Gross Weight : 6.6Kg (14.52 lbs))

Gross Weight : 7.1Kg (15.62 lbs)

ELECTRICAL

RATINGS

12V 3.0A (100-240V~, 50/60Hz)

12V 3.5A (100-240V~, 50/60Hz)

▶▶ NOTE :

Technical specifications are subject to change without notice.

INSTRUCTION MANUAL ……………………………………………………………………. 15

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

WEEE Symbols

16 ……………………………………………………………………. INSTRUCTION MANUAL

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other
European countries with separate collection
systems)

This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human

health from uncontrolled waste disposal, please

separate this from other types of wastes and
recycle it responsibly to promote the sustainable
reuse of material resources. Household users should
contact either the retailer where they purchased this
product, or their local government office, for details of
where and how they can take this item for
environmentally safe recycling. Business users
should contact their supplier and check the terms
and conditions of the purchase contract. This product
should not be mixed with other commercial wastes
for disposal.

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

P/N : L39ME0184 Rev.6

Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]