Viewsonic VX2000-1 Service Manual 1a
Service Manual
ViewSonic VX2000-1
Model No.VLCDS23723-1W
20.1” Color TFT LCD Display
ViewSonic
(VX2000-1_SM_558 -Rev.1a-Oct 2002)
381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright¤ 2002 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision Date Description Of Changes Approval
1a 10/29/02
Initial Reversion DCN-2323 Tom.Sears
ViewSonic Corporation
i
Confidential – Do Not Copy
VX2000-1
TABLE OF CONTENT
PRECAUTIOS AND NOTICES
Chapter 1 Introduction
1-1 The Appropriate Operation
1-2 Product Highlight
1-3 Technical Specification
Chapter 2 Mechanical Construction
2-1 Package Overview
2-2 Exploded Overview
Chapter 3 Procedure of Disassembly
3-1 Disassembly of Stand Unit and Main Body
3-2 Disassembly of Control Board, Cosmetic Cap and Front Cover
3-3 Disassembly of LCD Panels and Main Board
3-4 Disassembly of Support Bracket and Speakers
Chapter 4 Function of Boards
4-1 Main Board
4-2 Control Board
Chapter 5 Troubleshooting Procedure
5-1 Equipment Needed
5-2 Main Procedure
Chapter 6 Function Test and Alignment Procedure
6-1 Product and Test Equipment
6-2 Hot Key (Service Function)
6-3 Test Condition
6-4 Test Display Modes & Pattern
6-5 Function Test and Alignment Procedure
6-6 Cleaning
6-7 Inspection Standards
Chapter 7 Firmware Upgrade Procedure
7-1 Equipment Needed
7-2 Setup Procedure
7-3 Firmware Upgrade Procedure
Chapter 8 DDC Key in Procedure
8-1 Equipment Needed
8-2 Setup Procedure
8-3 DDC Key Procedure
ViewSonic Corporation
ii
Confidential – Do Not Copy
VX2000-1
Chapter 9 Panel Specification
9-1 LCD Panel (Model# FLC51UXC8V)
Chapter 10 Schematic Diagram & PCB Layout
10-1 Schematic Diagram
10-2 PCB Layout
Chapter 11 Appendix
11-1 The Serial Number System Definition
11-2 Reader’s Response
ViewSonic Corporation
iii
Confidential – Do Not Copy
VX2000-1
PRECAUTIONS AND NOTICES
Prior to using this manual, please ensure that you have carefully followed all the procedures
outlined in the user manual for this product.
Read all of these instructions.
z
Save these instructions for later use.
z
Follow all warnings and instructions marked on the product.
z
Do not use this product near water.
z
This display should be installed on a solid horizontal base.
z
When cleaning, use only a neutral detergent cleaner with a soft damp cloth. Do not spray
z
with liquid or aerosol cleaners.
Do not expose this display to direct sunlight or heat. Hot air may cause damage to the cabinet
z
and other parts.
Adequate ventilation must be maintained to ensure reliable and continued operation and to
z
protect the display from overheating. Do not block ventilation slots and openings with objects or
install the display in a place where ventilation may be hindered.
Do not install this display near a motor or transformer where strong magnetism is generated.
z
Images on the display will become distorted and the color irregular.
Do not allow metal pieces or objects of any kind fall into the display from ventilation holes.
z
Slots and openings in the cabinet and the back or bottom are provided for ventilation, to ensure reliable
operation of the product and to protect it from overheating, those openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation unless proper ventilation is provided.
ViewSonic Corporation
vi
Confidential – Do Not Copy
VX2000-1
Chapter 1 Introduction
This manual provides integral technical information you need to maintain the
LCD Monitor. And this manual is applied to the model of 1600*1200 pixels color TFT
LCD Monitor with a 20.1 flat panel screen. There are ten topics in this manual, and
you can immediately identify problems through this manual.
This manual is for the technicians and people who have the electronic background.
Send the product back to the distributor for repairing and do not attempt to do anything
which is complex or not mentioned in the troubleshooting.
the
1-1 The Appropriate Operation
VX2000 series
Turn off the Product before cleaning.
Ɣ
Use only a dry soft cloth when cleaning the LCD panel surface.
Ɣ
Ɣ
Use a soft cloth moistured with mild detergent to clean the display housing.
Ɣ
Use only high quality and safety approved AC/DC power Adapter.
Ɣ
Disconnect the Power Plug from AC outlet if the Product is not used for a long
VX2000 Series Service Manual
period of time.
Do not touch the LCD panel surface with sharp or hard objects.
Ɣ
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Ɣ
Do not operate the product under the following conditions:
* Extremely hot, cold or humid environment.
* Areas susceptible to excessive dusts and dirt
* Near any applicance generating a strong magnetic field.
* Place in direct sunlight.
ViewSonic Corporation
1-1
Confidential – Do Not Copy
VX2000-1
1-2 Product Highlight
Analog and digital signal inputs
Ɣ
Active matrix TFT LCD technology
Ɣ
VESA 1600*1200@60Hz
Ɣ
Ɣ
280 (max), 250 (typ), 200 (min)
30-82kHz Horizontal Frequency
Ɣ
45-85Hz
Ɣ
Auto Image Adjustment
Ɣ
Ɣ
Multifunction OSD user controls
Ɣ
VESA DPMS Power saving
Resolution Compatibility: 640*350, 640*480, 720*400, 800*600,
VX2000 Series Service Manual
Ɣ
2
cd/m
Vertical Refresh Rate
cd/m
2
832*624,1024*768, 1280*720, 1280*1024,
1600*1200
1-3 Technical Specification
I.) Fujitsu Panel
Active Matrix Type Liquid Crystal Panel
Ɣ
20.1 diagonal screen size
Ɣ
cd/m
2
VX2000 series
408.0(H)*306.0(V) Active Size
Ɣ
1600*1200 addressable pixels
Ɣ
Ɣ
0.255mm*0.255mm pixel pitch
Ɣ
280 (max), 250 (typ), 200 (min)
650:1(max),500:1(typ),350:1(min)
Ɣ
Ɣ
Lamp number : 6 CCFLs
Ɣ
Life: 50,000 hrs (min)
II.) Power Supply
Input Voltage Range: 90 to 264 VAC
Ɣ
Input Frequency Range: 47.5 to 63 Hz
Ɣ
Ɣ
Output Voltage@0 ~ 6.66A Load: 12V DC +/- 5%
Ɣ
Over Current Protection 8.66A typ at 12.6 VDC
Power Consumption 80 Watts (typ.)
Ɣ
cd/m
2
cd/m
2
cd/m
2
ViewSonic Corporation
1-2
Confidential – Do Not Copy
VX2000-1
III.) Audio
Line Input Connection: 3.5mm Stereo Jack
Ɣ
Ɣ
Line Input Signal: 1.3Vrms
Ɣ
Maximum Power Output (Electric): 3W @ <5% distortion
IV.) Look up Table Timing
(Analog)
640*350@70Hz, 31.5kHz 640*480@60Hz, 31.5kHz
Ɣ
640*480@67Hz, 35.0kHz 640*480@75Hz, 37.5kHz
Ɣ
Ɣ
Ɣ
VX2000 series
Ɣ
640*480@72Hz, 37.9kHz 640*480@85Hz, 43.27kHz
720*400@70Hz, 31.5kHz 800*600@56Hz, 35.1kHz
Ɣ
Ɣ
800*600@60Hz, 37.9kHz 800*600@75Hz, 46.9kHz
Ɣ
800*600@72Hz, 48.1kHz 800*600@85Hz, 53.7kHz
Ɣ
832*624@75Hz, 49.7kHz 1024*768@60Hz, 48.4kHz
Ɣ
1024*768@70Hz, 56.5kHz 1024*768@72Hz, 58.1kHz
Ɣ
1024*768@75Hz, 60.0kHz 1024*768@85Hz, 68.67kHz
1280*1024@60Hz, 63.4kHz
Ɣ
1280* 2 @60Hz, kHz
Ɣ
Ɣ
(Digital)
Ɣ
Ɣ
Ɣ
Ɣ
70
1600*1200@60Hz,
640*350@70Hz, 31.5kHz 640*400@60Hz, 31.5kHz
640*480@60Hz, 31.5kHz 640*480@75Hz, 37.5kHz
640*480@72Hz, 37.9kHz 640*480@85Hz, 43.27kHz
720*400@70Hz, 31.5kHz 800*600@56Hz, 35.1kHz
45
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
1280*1024@75Hz, 79.97kHz
Ɣ
Ɣ
Ɣ
Ɣ
VX2000 Series Service Manual
Ɣ
800*600@60Hz, 37.9kHz 800*600@75Hz, 46.9kHz
Ɣ
800*600@72Hz, 48.1kHz 800*600@85Hz, 53.7kHz
Ɣ
1024*768@60Hz, 48.4kHz 1024*768@70Hz, 56.5kHz
Ɣ
1024*768@72Hz, 58.1kHz 1024*768@75Hz, 60.0kHz
Ɣ
1024*768@85Hz, 68.67kHz
Ɣ
1600*1200@60Hz,
ViewSonic Corporation
1-3
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
1280* 2 @60Hz, kHz
70
Ɣ
1280*1024@60Hz, 63.4kHz
Confidential – Do Not Copy
45
VX2000-1
V.) Mechanical & Environmental Condition
Ɣ
Width*Height*Depth: 483.0mm*502.1mm*69.5mm(exclude Stand)
483.0mm*502.1mm*210.35mm(full set)
Ɣ
Monitor Weight 8.4kgs/18.5lbs
Operating Temperature: 00C to +400C
Ɣ
Ɣ
Storage Temperature: -200C to +600C
Operating Relative Humidity: 20%~85% RH Non-Condensing
Ɣ
Storage Relative Humidity: 5%~85% RH Non-Condensing
Ɣ
VX2000 Series Service Manual
VX2000 series
ViewSonic Corporation
1-4
Confidential – Do Not Copy
VX2000-1
Chapter 2 Mechanical Construction
2-1 Package Overview
VX2000 series
VX2000 Series Service Manual
ViewSonic Corporation
2-1
Confidential – Do Not Copy
VX2000-1
2-1.1 Replacement Parts List
metI N/P noitpircseD
1100.10785.CD)USTIJUF(0002XV.C.D
2100.10785.650002XVEPERNOIHSUC
3100.20785.650002XVEPELNOIHSUC
4100.10785.550002XVmm562*045*08581-BANOTRAC
5300.18000.15ELOH/Wt40.0*098*545EPDLGABEP
VX2000 Series Service Manual
6100.30285.53mm67*67NOTRACLEBAL
7100.PD785.070002XVEGAKCAPNOMMOC
8100.20125.550205-TML35*591*593BXOB
9300.10995.24seireSXVEROC2mm0081P51AGVELBAC
01100.10785.74ESL;A66.6/V21:TUOV042-001:NIRETPADA
11210.80165.2400-1434-788XELOMEROC-2M8.1IVD-IVDELBAC
21100.30995.240002XVML/KB/MLM8.1OIDUAELBAC
31100.40995.240002XVKP/KB/KPM8.1CIMELBAC
41100.70275.24)AN(DLEIHSNUM1.0M8.1DROCREWOPELBAC
51100.10785.63OCE99'OCT+DC+LAUGNILITLUMEDIUGS'RESU
0002XVTNEMUCOD
VX2000 series
ViewSonic Corporation
2-2
Confidential – Do Not Copy
VX2000-1
2-2 Exploded Overview
VX2000 series
VX2000 Series Service Manual
ViewSonic Corporation
2-3
Confidential – Do Not Copy
VX2000-1
2-2.1 Replacement Parts List
metI N/P noitpircseD
1100.50309.53OGOL-LAcinoSweiV
2100.20785.530002XVmm5.71*77CIMLEBAL
3100.10565.84V8CXU15CLFUSTIJUF"1.020061*0021DCLTFT
4100.10585.94057GVELUDOMREKAEPSYSSA
5100.10785.150002XVA70SV-CP+SBAREVOCTNORF
VX2000 Series Service Manual
6100.20785.150002XV60SV-CP+SBAREVOCRAER
7100.30785.150002XV60SV-CP+SBAPACCITEMSOC
8100.50785.150002XVAMMPSNELDEL
9100.70785.150002XV60SVBH-SBAPACEGNIH
01100.80785.150002XV60SVBH-SBAMRATNORF
11100.90785.150002XV60SVBH-SBAMRARAER
21100.01785.150002XV60SVBH-SBAESAB
31100.40000.25DAPREBBUR
41200.30575.250002XVt2*01*53TOOFREBBUR
51100.11785.15cinoSweiVESPILLEETALPEMAN
61100.10785.160002XVt0.1CCESTKRBTROPPUS
71100.40785.160002XVnZBONKHCUOT
81100.20785.160002XVEGNIHTLIT
91100.30785.160002XVt0.2nZ-CHPSETALPESAB
02100.10785.080002XVDBNIAMABCP
12100.20785.080002XVDBLORTNOCABCP
VX2000 series
22100.30785.080002XVDBCIMABCP
32570.GA500.58KOLYNiN5.7L*5H*04-4#O/IXEHWERCS
42001.721B1.58iM01*5.3MS/WHCEMNAPWERCS
52060.321F1.58iN6*3MFS/WHCEMNAPWERCS
62001.423F1.58iN01*4MFS/WHCEMNAPWERCS
72060.425A4.58KOLYN-iN6*4MHCEMTALFWERCS
82001.321AS.58iN01*3ML2P-ETITPATGNIDNIBWERCS
92070.323AU.58kcalB7*3MSDAERHTELBUODPATNAPWERCS
03060.321AY.58iN6*3MPATTALFWERCS
13100.30309.530063XVOGOLDRIB3LEBAL
23100.10785.24LENAP-BM;0002XVmm08103#1751LUP04/03.A.W
33100.20785.24LRTC-BM;0002XVmm06282#1751LUP81.A.W
ViewSonic Corporation
2-4
Confidential – Do Not Copy
VX2000-1
metI N/P noitpircseD
43100.30785.24VNI-BM;USTIJUF;0002XVmm08162#7001LUP21.A.W
53100.10785.530002XVCEPSLEBAL
63100.20385.53cinoSweiVmm04*04EDOCRABLEBAL
73100.97000.15908DOOGNIPNOLYNREHSAWROTSISNART
VX2000 series
83100.21785.150002XVRALYMmm50.0*08*533ETALPEGAKAELTHGIL
VX2000 Series Service Manual
93100.31785.150002XVRALYMmm50.0*09*544ETALPEGAKAELTHGIL
ViewSonic Corporation
2-5
Confidential – Do Not Copy
VX2000-1
Chapter 3 Procedure of Disassembly
3-1 Disassembly of Stand Unit and Main Body
Hinge Cap
1
Rear Arm
VX2000 series
VX2000 Series Service Manual
1. Lay VX2000 Monitor face down to take off Rear Arm and Hinge Cap.
Stand Unit
3
Base Unit
2. Unscrew the four screws to remove the Stand and Main Unit.
2
Hinge Tilt Unit
3. Unscrew the four screws to remove the Hinge Tilt and Base Unit.
ViewSonic Corporation
3-1
Confidential – Do Not Copy
VX2000-1
4
Hinge Tilt Unit
VX2000 Series Service Manual
4. Press the tenon of two sides to remove the Front Arm and Hinge Tilt.
Base Cover
5
6
Mic Board
5. Unscrew the four screws to remove the Base Cover and Plate.
Base Plate
VX2000 series
6. Unscrew the two screws to remove the Mic Board from Base Cover.
ViewSonic Corporation
3-2
Confidential – Do Not Copy
VX2000-1
3-2 Disassembly of Control Board, Cosmetic Cap and Front Cover
1
VX2000 Series Service Manual
2
VX2000 series
1. First turn over the monitor, push Front Cover upward and press
the two sides from up to down to remove the Cosmetic Cap.
2. Unplug the Control wire and unscrew the two screws to remove the
Control Board.
Main Unit
Control Board
Cosmetic Cap
3
Front Cover
3
3. Unscrew the three screws of Front Cover and push from down to up
to remove it from Main Unit.
ViewSonic Corporation
3-3
Confidential – Do Not Copy
VX2000-1
3-3 Disassembly of LCD Panel and Main Board
1
VX2000 Series Service Manual
2
1. Remove the EMI tape and unscrew the four screws on the LCD Panel.
3
LCD Panel
2. Unplug all wires on the LCD Panel.
3. Remove the LCD Panel.
5
VX2000 series
4
6
Main Board
4. Unscrew the four screws on the Main Board.
5. Turn over the Rear Cover Unit and unscrew the four hex screws.
6. Turn over it again and remove the Main Baord.
ViewSonic Corporation
3-4
Confidential – Do Not Copy
VX2000-1
3-4 Disassembly of Support Bracket and Speakers
1
2
Speakers
1. Unscrew the eight screws on Support Bracket to remove it.
2. Unscrew the eight screws on the Speakers to remove it.
VX2000 series
VX2000 Series Service Manual
3
Lock Bracket
Tinplate
3. Remove the Lock Bracket Tinplate from Rear Cover.
ViewSonic Corporation
3-5
Confidential – Do Not Copy
VX2000-1
Chapter 4 Function of Boards
4-1 Main Board
4-1.1 The Location of Connectors
JP3
VX2000 series
4-1.2 JP1: Inverter Connector
JP1
JP8
JR7
JR1
#niP noitpircseD noitcnuF
1R_NOLBlortnoCffo/nothgilkcaB
2NOLB_FDnoitcennoCoN
JR5 JR4
VX2000 Series Service Manual
3ssenthgirBtnemtsujdAssenthgirB
4DNGdnuorG
5DNGdnuorG
6DNGdnuorG
7DNGdnuorG
8DNGdnuorG
92PV21+ylppuSrewoPV21+
012PV21+ylppuSrewoPV21+
112PV21+ylppuSrewoPV21+
212PV21+ylppuSrewoPV21+
ViewSonic Corporation
4-1
Confidential – Do Not Copy
VX2000-1
4-1.3 JP3 Connector: Panel Connector
#niP noitpircseD noitcnuF
1
2
3
4
5
6
ylppuSrewoPV21+
-0NIARtupnIlaitnereffiDevitageN
ylppuSrewoPV21+
+0NIARtupnIlaitnereffiDevitisoP
DNGdnuorG
-1NIARtupnIlaitnereffiDevitageN
VX2000 Series Service Manual
7
8
9
01
11
21
31.C.NnoitcennoCoN
41-NIAKCtupnIlaitnereffiDevitageN
51.C.NnoitcennoCoN
61+NIAKCtupnIlaitnereffiDevitisoP
DNGdnuorG
+1NIARtupnIlaitnereffiDevitisoP
.C.NnoitcennoCoN
-2NIARtupnIlaitnereffiDevitageN
LESredrOataDSDVLtceleS
+2NIARtupnIlaitnereffiDevitisoP
VX2000 series
71.C.NnoitcennoCoN
81-3NIARtupnIlaitnereffiDevitageN
91.C.NnoitcennoCoN
02+3NIARtupnIlaitnereffiDevitisoP
12ylppuSrewoPV21+
22-0NIBRtupnIlaitnereffiDevitageN
32.C.NnoitcennoCoN
42+0NIBRtupnIlaitnereffiDevitisoP
52DNGdnuorG
62-1NIBRtupnIlaitnereffiDevitageN
72DNGdnuorG
82+1NIBRtupnIlaitnereffiDevitisoP
92.C.NnoitcennoCoN
03-2NIBRtupnIlaitnereffiDevitageN
13.C.NnoitcennoCoN
23+2NIBRtupnIlaitnereffiDevitisoP
33.C.NnoitcennoCoN
ViewSonic Corporation
4-2
Confidential – Do Not Copy
VX2000-1
Loading...