This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
•
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
Warning: You are cautioned that changes or modications not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
For Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage
Directive 2006/95/EC.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as
unsorted municipal waste, but use the return and collection systems
according to local law.
If the batteries, accumulators and button cells included with this equipment,
display the chemical symbol Hg, Cd, or Pb, then it means that the battery has
a heavy metal content of more than 0.0005% Mercury or more than, 0.002%
Cadmium, or more than 0.004% Lead.
ViewSonic VOT550
i
FCC Radiation Exposure Statement
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This wireless module device complies with part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Industry Canada Notice
This wireless module device complies with Canadian RSS-210.To prevent
radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment (or its
transmitting antenna) that is installed outdoors is subject to licensing. The installer of
this radio equipment must ensure that the antenna is located or pointed such that it
does not emit RF eld in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada’s web site www.hc-sc.gc.
ca/rpb.
R&TTE Compliance Statement
This wireless module device complies with the Essential Requirements of the R&TTE
Directive of the European Union (1999/5/EC). This equipment meets the following
conformance standards:
ETSI EN 300 328
EN 301 489-01
EN 301 489-17
NotiedCountries:Germany, UK, Netherlands, Belgium, Sweden, Denmark,
Finland, France, Italy, Spain, Austria, Ireland, Portugal, Greece, Luxembourg,
Estonia, Latvia, Lithuania, Czech Republic, Slovakia, Slovenia, Hungary, Poland and
Malta.
ViewSonic VOT550
ii
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of re or
electric shock, do not expose this apparatus to rain or moisture.
6. Do not block any ventilation openings. Install the equipment in accordance with
the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including ampliers) that produce heat.
8. Do not attempt to circumvent the safety provisions of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade
and the third prong are provided for your safety. If the plug does not t into your
outlet, consult an electrician for replacement of the outlet.
9. Protect the power cord from being tread upon or pinched, particularly at the plug,
and the point where if emerges from the equipment. Be sure that the power outlet
is located near the equipment so that it is easily accessible.
10. Only use attachments/accessories specied by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the equipment. When a cart is used, use
caution when moving the cart/equipment combination to avoid injury
from tipping over.
12. Unplug this equipment when it will be unused for long periods of time.
13. Refer all servicing to qualied service personnel. Service is required when the
unit has been damaged in any way, such as: if the power-supply cord or plug is
damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed
to rain or moisture, or if the unit does not operate normally or has been dropped.
ViewSonic VOT550
iii
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive
2002/95/EC of the European Parliament and the Council on restriction of the use
of certain hazardous substances in electrical and electronic equipment (RoHS
Directive) and is deemed to comply with the maximum concentration values issued
by the European Technical Adaptation Committee (TAC) as shown below:
Substance
Lead (Pb)0,1%< 0,1%
Mercury (Hg)0,1%< 0,1%
Cadmium (Cd)
Hexavalent Chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
Proposed Maximum Concentration
0,01%< 0,01%
0,1%< 0,1%
0,1%< 0,1%
0,1%< 0,1%
Actual Concentration
Certain components of products as stated above are exempted under the Annex of
the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other
lamps not specically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes,
and electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight,
aluminium containing up to 0.4% lead by weight and as a cooper alloy containing
up to 4% lead by weight.
Microsoft
trademarks of Microsoft
ViewSonic
registered trademarks of ViewSonic
, Windows®, Windows NT®, and the Windows® logo are registered
®
Corporation in the United States and other countries.
®
, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are
®
Corporation.
Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation.
®
Award
AMI
Disclaimer: ViewSonic
is a registered trademark of Phoenix Technologies Ltd.
®
is a registered trademark of American Megatrends Inc.
®
Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves
the right to change product specications without notice. Information in this
document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means,
for any purpose without prior written permission from ViewSonic
®
Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it
becomes available, please register your product on the Internet at: www.viewsonic.
com. The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print
®
the registration form, which you may mail or fax to ViewSonic
.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green.
Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic
website to learn more.
USA: http://www.viewsonic.com/company/green/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
VOT550
ViewSonic PC Mini
VS12663
VOT550-1_UG_ENG Rev. 1B 08-30-10
ViewSonic VOT550
v
Chapter 1
Getting Started
System Overview
The PC Mini VOT550, with its compact design, is one
of the smallest Intel powered personal computers in the
world. Powered by an Intel Core Two Duo processor
it features a Microsoft Windows 7 operating system.
Connect to an LCD or large format TV to grab your
videos from the Web or from a CD. It is equipped
with Optional BluRay Drive and 2.5” 320GB/500GB
SATA hard disk drive, perfect for down loading movies,
managing your content or creating an entertainment
hub.
Achieve connectivity with optional 802.11/g/n for
wireless ready interface with all your devices such
as smart phones, printers, PDAs, etc. The VOT550
optomizes your total entertainment experience with
precision and ease.
ViewSonic VOT550
1
Packing Content
Getting Started
VOT550 PC MiniWizard CD
DVI to VGA
Power cord
Converter
(Select Model)
Recovery and
Driver Disk
S/PDIF Converter
Quick Start Guide
90W DC 20V
Power Adapter
AntennaRemote Control
ViewSonic VOT550
2
Application Scenarios
Living Room Scenario
You can connect the system in your living room
to an HDTV, speakers, DVD/VCD players, DSL
(cable) modem, or other peripheral devices to
build a digital home center.
HomeOfceScenario
You can place your system together with an LCD
video display, speakers, printer/scanner/fax, DSL
Getting Started
(cable) modem, or other peripheral devices in your
study.
Professional Scenario
You can connect the system in a business
conference room to a projector in order to make
presentations.
Mobile Scenario
Because the system comes in very compact size,
you can carry it from your home to the ofce, or
to a business meeting conveniently in a carrying
case.
ViewSonic VOT550
3
Getting Started
The Front View
The power button is located in the center of the front panel. The optional optical disc
drive is also located near the top of the front panel. You can place a DVD or CD
optical disc into the opening near the top of the front cover. The disc eject button is
located to the left of the front panel when you face the front of the system. 2 USB
ports are also located on the left hand side of the power button, and both of power
indicator and HDD indicator will locate on the right hand side. The front view of the
system is illustrated below:
1
CD/DVD Eject Button
3
USB 2.0 Port
CD/DVD Eject ButtonUse to eject ODD disk.
1
BluRay DriveBluRay Drive.
2
USB 2.0 PortConnects USB devices such as a mouse, keyboard, printer, scanner,
3
Power ButtonPress to power on/off the PC Mini.
4
IR indicatorWhen the IR indicator blinks it means the remote is working.
5
HDD indicatorWhen the HDD indicator blinks it means the HDD is working.
6
Power indicatorThe power LED turns blue when the system is turned on.
7
and other peripherals.
4
Power Button
2
BluRay Drive
IR indicator
5
6
HDD indicator
7
Power indicator
Note: Please push the center power button to boot up the VOT550.
ViewSonic VOT550
4
Getting Started
ViewSonic VOT550
5
The Rear View
You can nd the connectors for the power source, DVI, network, USB 2.0, eSATA,
Line in (S/PDIF out), Line out, and MIC as illustrated below.
S/PDIF cable connector
There is one S/PDIF cable connector in your package box. To connect to the back
panel of your machine correctly, please refer to the diagram as shown below:
+
DVI
e-S
ATA
+
DVI
e-SATA
e-S
AT
A
Rear panel I/O port Indicator
Getting Started
Projector
DVI to VGA &
DVI Adapter
1
Security lock
CRT MonitorLCD Monitor
3
2
DVI
Internet
11
ADSL (Cable) Modem
HDMI TV
4
5
Wireless 802.11 Antenna
+
e-SATA
9
eSATA Port
10
USB 2.0 Port Expander (USB HUB)
DVI to HDMI Adapter
S/PDIF out
6
Line out
7
8
Microphone (MIC)
Fax/Scanner/Printer
12
Wall Outlet
KensingtonUse this to securely lock the PC Mini.
1
DVI PortUse to connect to a display with DVI to VGA & DVI Adapter.
2
LCD MonitorConnect to LCD Monitor.
3
DVI PortUse to connect to a display with DVI port, or HDMI with DVI to
Antenna ConnectorUse for connecting the WiFi wireless antenna.
5
S/PDIF out JackConnect optical 5.1 digitial signal out to decode.
6
Line-out jackOutput the audio signal to an external audio device.
7
Microphone JackUse for chatting and other interactive applications.
8
e-SATA PortUse to connect to a e-SATA device, such external HDD with eSATA cable.
9
USB 2.0 PortConnects USB devices such as a mouse, keyboard, printer, scanner, and other
10
peripherals.
RJ45Connects to a local area network (LAN) using a network cable.
11
12
DC Jack
Use to connect the power adapter.
ViewSonic VOT550
6
Chapter 2
Connecting Your System
This chapter will guide you in installing
necessary and additional components to
maximimize the system performance of your
PC Mini. The following topics are covered:
Connecting to Video Display
•
Connecting the LCD or CRT Monitor
•
Connecting to HDTV Set
•
Connecting to Projector
•
Connecting to Keyboard and Mouse
•
Connecting to USB Hub
•
Connecting to Fax/Printer/Scanner
•
Connecting to Speaker
•
Connecting to the Internet and Network
•
Connecting to Webcam
•
Connecting to Memory Sticks, Card
•
Readers, Memory Cards
Connecting Power Source
•
ViewSonic VOT550
7
Connecting Your System
Connecting Power Source
The system comes with a power cable and adapter. Plug the output of the power
adapter to the power connector on the back panel of the system unit. Then, connect
the power plug to the wall outlet. Once the system is connected to the power source,
the power indicator in the middle of the front panel will light up. You should press the
power button on the front panel to start the system.
+
+
ViewSonic VOT550
8
Connecting Your System
Connecting to Video Display
You can connect the system to many types of video display devices, including
projector, LCD or LCD TVs.
Connecting to a LCD
You can connect the system to an LCD monitor. The video signal connector from
the LCD monitor connects to the DVI connector through a DVI cable. If you want to
connect the system to VGA input monitor, you have to use a DVI to VGA converter.
The VOT550 has 3 options to connect to a LCD monitor.
• DVI cable directly connect to DVI input (LCD monitor)
• DVI jack add DVI-to-HDMI adapter/ cable to HDMI input (LCD monitor)
• DVI jack add DVI-to VGA adapter/ cable to VGA input (LCD monitor)
oror
VGA Cable
HDMI Cable
+
+
LCD
ViewSonic VOT550
Monitor
DVI Cable
9
Connecting Your System
Connecting to a HDTV
You can connect the PC Mini to a HDTV with HDMI connections. You will need to use
the DVI to HDMI adapter along with your HDMI cable.
VOT550 to HDTV:
• Add the DVI-to-HDMI adapter to the DVI jack and then connect the HDMI cable
to the HDTV.
+
+
ViewSonic VOT550
HDMI Cable
HDTV
10
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.