ViewSonic VS12464-1G User Manual

VT2430-G
LCD TV
-
使用手册
使用手冊
-
- User Guide
Model No. : VS12464-1G
Important Safety Instructions........................................................................... 1
Copyright Information ...................................................................................... 2
Product Registration ........................................................................................ 2
Antenna Installation Instructions ..................................................................... 3
Cleaning the LCD TV ...................................................................................... 3
Getting Started
Package Contents ........................................................................................... 4
Mounting ViewSonic LCD TV to the wall ......................................................... 4
Front View of the Product ................................................................................ 6
Rear View of the product ................................................................................. 7
Remote Control ............................................................................................... 8
Installation ....................................................................................................... 9
Basic Operation ............................................................................................... 13
OSD Functions
Picture Menu ................................................................................................... 14
Sound Menu .................................................................................................... 14
Setup Menu ..................................................................................................... 15
TV-Channel
PC Menu ......................................................................................................... 18
Menu ........................................................................................... 15
Other Information
Specications .................................................................................................. 19
Troubleshooting............................................................................................... 20
Customer Support ........................................................................................... 22
Declaration of RoHS Compliance.................................................................... 22
Limited Warranty ............................................................................................. 23
ENGLISH
ViewSonic VT2430
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including ampliers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not t into your outlet, consult an electrician for
replacement of the outlet.
ENGLISH
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the point where if emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualied service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.
15. This product is only to perform the useful function of entertainment and visual display
tasks are excluded.
ViewSonic VT2430
1
Copyright Information
Copyright © ViewSonicTM Corporation, 2009. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with environmental laws of your location.
VT2430
ViewSonic LCD TV
VS12464-1G
VT2430-G_UG_ENG Rev. 1A 02-23-09
_________________________________ _________________________________
ENGLISH
ViewSonic VT2430
2
Antenna Installation Instructions
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and built-up static charges, Article 810
of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off your LCD TV and wait for the weather to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Antenna
ENGLISH
Ground clamp
Antenna discharge unit
Electric service equipment
Ground clamps
Grounding conductors
Power service grounding electrode system
Cleaning the LCD TV
• Make sure the LCD TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonicTM does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or
case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic
will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic VT2430
3
Getting Started
Congratulations on your purchase of a ViewSonicTM LCD TV.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV package includes:
LCD TV
Power Cord
* Note: For Hong Kong area, there is no warranty card.
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the wall, please consider the following guidelines:
• Due to safety concerns, if the VESA mounting kit is purchased separately please make
sure the mounting kit is UL-Listed, and replaceable only by service personnel.
• Read the Important Safety Instructions, at the start of this manual.
Do not install in a moist or wet environment. This equipment is intended for indoor use.
Do not install near heat source, or strong magnetic elds.
Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to rst remove the
stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the LCD TV.
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
Please refer the following steps to remove the stand.
1. Lay the TV at on a table with the LCD screen face down. To prevent the TV from being
scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Press on four corners of the hinge cover and pull as arrow direction to disengage the hinge cover.
3. Remove the 4 screws on the hinge, then pull up the stand slowly.
4. Then, you shall successfully uninstall the stand.
Remote Control with batteries
VGA Cable
• ViewSonic User Guide
Warranty Card *
ENGLISH
ViewSonic VT2430
4
Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply
causing the unit to fail. The wall-mount screw type is M4 x L10.
Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during operation.
Hang the LCD TV wall mount plate to the wall mount bracket, completing installation. Enjoy your ViewSonic LCD TV!
ENGLISH
ViewSonic VT2430
5
Front View of the Product
Item Description
Power ON/OFF button
1
Power LED Indicator
2
Remote Control Receiver
3
VOL -
4
VOL +
5
MENU
6
CH -
7
CH +
8
INPUT
9
Turn the power on from standby mode or turn the power off to return to the standby mode.
Lights up in blue when the TV is turned on. Lights up in orange when the TV is in standby mode.
Receives IR signals from the remote control.
Decrease sound volume or adjust a highlighted control while in
OSD menu.
Increase sound volume or adjust a highlighted control while in
OSD menu.
Turn OSD menu ON/OFF.
Channel down when source is TV, or select a control while in
OSD menu.
Channel up when source is TV, or select a control while in OSD
menu.
Select input source.
ENGLISH
ViewSonic VT2430
6
Loading...
+ 18 hidden pages