ViewSonic VS12279-1G, VS12277-1G, VS12278-1G User Manual

ViewSonic®
N3290w/N4290p/N4790p
LCD TV
 ΁ၬ手册
ViewSonic®
 8VHU*XLGH
0RGHO1R96 *
96 * 9966**
  
Contents
Important Safety Instructions........................................................................... 1
Copyright Information ...................................................................................... 2
Product Registration........................................................................................ 2
Antenna Installation Instructions ..................................................................... 3
Getting Started
Cleaning the LCD TV ...................................................................................... 4
Package Contents ........................................................................................... 5
Mounting ViewSonic LCD TV to the wall......................................................... 5
Place the TV on a solid surface....................................................................... 6
Install the wall mount plate to the LCD TV....................................................... 6
Connecting the power...................................................................................... 6
Turn the TV on & Off........................................................................................ 7
Watching TV.................................................................................................... 7
Overview the LCD TV & Connection
The Front of the Screen Introduction............................................................... 8
Signal Source Interface from Rear View.......................................................... 9
Signal Source Interface from Side View............. ............................................. 11
To Use Remote Control.................................................................................... 12
Remote Control Battery Installation............................... .................................. 13
OSD Functions
To Use the OSD Menu..................................................................................... 14
To Select Input Source..................................................................................... 14
OSD Menu in AV/TV Mode............................................................. ................. 14
OSD Menu in PC Mode ................................................................................... 20
Other Information
Specifications .................................................................................................. 24
Troubleshooting............................................................................................... 25
Customer Support ........................................................................................... 27
Declaration of RoHS Compliance.................................................................... 27
Limited Warranty ............................................................................................. 28
ENGLISH
ENGLISH
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifier) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, consult an electrician for replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the point where if emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by
th e manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to quali been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.
15. This product is only to perform the useful function of entertainment and visual display tasks are excluded.
fi
ed service personnel. Service is required when the unit has
16. To avoid the risk of electric shock, do not disassemble the equipment. For safety reasons, this equipment can only be disassembled by professionals.
17. The equipment shall not be caught in rain, and any object containing liquid such as vase can not be put on it.
18. The Category I equipments must be connected with plugs or power with protective earthing.
19. If a plug or a coupler is used as the power off device, its ease of operation must be guaranteed.
20. If an all-pole switch is used as the power off device, its location on the equipment and its function must be described, and the ease of switch operation must be guaranteed.
21. Please plug the TV’s power plug into a nearby power outlet that is the most convenient for connection.
22. Warning:To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
23. For the battery:
ķ If batteries are needed for the equipment, please ensure the correct polarities of the
batteries (+/-) while installing.
ĸ The waste batteries shall be properly disposed of, and never burn it in a fire. Ĺ Never expose the batteries (packaged batteries or the batteries installed in the equipment)
to excessive heat, for example, the sunlight or fire and the like.
ViewSonic N3290w/N4290p/N4790p
1
Copyright Information
®
Copyright © ViewSonic
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
Corporation, All rights reserved.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com.
For your Record
Product Name: N3290w/N4290p/N4790p
ViewSonic LCD TV
Model Number: VS12277-1G/VS12278-1G/VS12279-1G Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with environmental laws of your location.
N3290w_N4290p_N4790p-1G_UG ENG Rev.1B 07-22-08
ENGLISH
ViewSonic N3290w/N4290p/N4790p
2
ENGLISH
ENGLISH
Antenna Installation Instructions
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off your LCD TV and wait for the weather to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Electric service equipment
Ground clamp
Ground clamps
Antenna
Antenna discharge unit
Grounding conductors
Power service grounding electrode system
ViewSonic N3290w/N4290p/N4790p 3
Cleaning the LCD TV
• Make sure the LCD TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non­abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
®
ViewSonic the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
does not recommend the use of any ammonia or alcohol-based cleaners on
ENGLISH
ViewSonic N3290w/N4290p/N4790p
4
ENGLISH
Getting Started
Congratulations on your purchase of a ViewSonic® LCD TV.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV package includes:
• LCD TV
• Power Cord
• Warranty Card*
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the wall, please consider the following guidelines:
z Read the Important Safety Instructions, at the start of this manual. z Do not install in a moist or wet environment. This equipment is intended for indoor use. z Do not install near heat source, or strong magnetic fields z Use only ViewSonic z Before attaching the wall mount plate to the back cover, ensure the product is working. z If your LCD TV is already set up for free-standing operation, you need to first remove
the stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
z Disconnect the power and any other cables that might hinder moving the LCD TV. z Set the LCD TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
z
Please refer the following steps to remove the stand.
1. Remove the base. It is attached to the stand with 4 screws.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.
approved wall-mounting brackets to support the LCD TV weight.
• Remote Control with batteries
• RF Cable
• ViewSonic User Guide
.
ViewSonic N3290w/N4290p/N4790p
5
Place the TV on a solid surface
1. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
2. Leave at least 15cm around the TV set. Otherwise, air-circulation may be inadequate and cause overheating, which may cause a fire or damage to the TV set.
3. Never place the TV set in hot, oily humid or excessively dusty places.
4. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity.
5. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.
Install the wall mount plate to the LCD TV
1. Please refer page 24 to understand wall mount dimension.
2. If the TV set is to be installed on a w service personnel. Improper installation may render the TV set unsafe..
3. Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 6 cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during operation.
4. Before mounting your TV on the wall, you need to remove the base and connect all of the
input source from the rear I/O.
all, have the installation carried out by qualified
Connecting the power
1. This TV set is designed to operate on a 220–240V AC supply only. Take care not to connect too many appliances to the same mains socket as this could result in fire or electric shock.
2. Do not use a poor fitting mains socket. Insert the plug fully into the mains socket. A poor fit may cause arcing and result in a fire. Contact your electrician to have the mains socket changed.
3. The TV set is not disconnected from the mains when the TV set is switched off. To disconnect the TV set completely, pull the plug from the mains. However, some TV sets may have features which need the TV set to be left in standby to work correctly. The instructions in this manual will inform you if this applies.
4. If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons.
ENGLISH
ViewSonic N3290w/N4290p/N4790p 6
Turn the TV on & Off
1. Power On :
Press the power button on the remote control or key to pad to turn it on.
2. Power Off :
Press the power button on the remote control or key to pad to turn it on.
3. LED Indicator
Lights up in blue : the TV is turned on. Lights up in red : the TV is in standby mode.
Watching TV
ENGLISH
1. Press the TV button on the remote control or press source button to select TV input.
2. Press the MENU button to display the OSD main menu.
3. Press  or to select the “TV Setting” menu.
Press  or  to select “Auto Search, and then press  to perform Auto Search function. The Auto Scan screen will be shown, and after it is done, the screen will return to the rst found channel. Press the number buttons or Channel up /down to select a TV Channel.
ViewSonic N3290w/N4290p/N4790p
7
Overview the LCD TV & Connection
㢆ᄭ
The Front of the Screen Introduction
ENGLISH
Power(䶣ᄭ):
Source(
Menu(လ㧧):
CH/ (咢ሐ):
Vol+/- (ଃၦ):
Turn the power on from standby mode or turn the power off return to the standby mode.
): Press this button to display selected source, press  button to
select input source. Press this button to display or exit the OSD menu.
When the OSD menu appears, press these two buttons to select the item you want to execute; when no OSD menu appears, use to change channels in TV mode.
When the OSD menu appears, press these two buttons to confirm the selected item; when no OSD menu appears, use to adjust the volume.
ViewSonic N3290w/N4290p/N4790p 8
Loading...
+ 21 hidden pages