ViewSonic NextVision N2010, VS10563-2E User Manual

ViewSonic

®

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Användarhandbok

- Käyttöopas

- Руководство пользователя

ViewSonic

®

N2010

LCD TV Display

E
N
G
L

I
S
H

Contents

ViewSonic N2010 1

Product Registration.................................................................2

For Your Records.....................................................................2

Important Product Safety Instructions......................................3

Antenna Installation Instructions...............................................4

Cleaning the LCD Display.................................................4

Package Contents....................................................................5

Front View of the Product.........................................................6

Rear View of the Product..........................................................7

Remote Control.........................................................................8

Installation.................................................................................12

Ba sic Operation........................................................................18

Getting Started

OSD Functions

In TV/ AV/ S-Video/ YPbPr/ SCART Mode..............................19

In PC Mode...............................................................................25

Other Information

Specifications...........................................................................27

Troubleshooting........................................................................28

Customer Support....................................................................29

Limited Warranty......................................................................30

Appendix

Safety Guidelines.....................................................................31

CE Conformity for Europe......................................................31

E
N
G
L

I
S
H

ViewSonic N2010 2

Copyright © ViewSonic Corporation, 2005. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.

To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com.

Product Registration

For Your Records

Product Name:
Model Number:

Serial Number:
Purchase Date:

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.

ViewSonic N2010
VS10563-2E

E
N
G
L

I
S
H

IMPORTANT PRODUCT SAFETY INSTRUCTIONS

ATTENTION:

Follow and obey all warnings a nd in structions marked on your product a nd its operating instructions. For your safety,
plea se read all the safety a nd operating instructions bef ore you operate this product follow its operating and keep this
user guide for future reference.

INSTALLATION

1. Grounding or Polarization

Y our product may be equi pped with a polarized alternating-current line plug (a plug having one bla de wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature.If you are una ble to in sert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your ele ctrician to repla ce your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.

2. Overloading

Do not overload wall outlets, extension cords, or integral convenience recepta cle s a s this ca n result in a ris k of f ire
or electric shock.

3. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items pla ced upon or
against them, paying particular attention to cords at plugs, convenience recepta cles, a nd the point where they exit
from the product.

4. Ventilation

Slots and openings around the cabinet are provided f or ventilation.
To ensure relia ble operation of the product and to protect it from overheating, these openings must not be
blocked or covered.

Do not block the openings by placing the product on a bed, sofa, rug or other si milar surfa ce.
Do not place the product in a built-in installation such a s a bookcase or rack unless proper ventilation is provided or
the manufa cturer's instructions have been a dhered to.

5. Other Notices

Avoid exposure the N2010 to direct sunlight or high temperature.
Avoid exposure the N2010 to moisture or high humidity.
Do not attempt repair yourself. Your warranty does not cover repair or attempted repair by a nyone not authorized
by ViewSonic.
If your N2010 will not be used for a long period of time, unplug the power cord and re move the batteries from the
remote control.

ViewSonic N2010 3

6. Precautions

Sit at least 20" from your LCD display.

Avoid touching the screen. Skin oils are difficult to re move.
Never remove the rear cover . Your LCD display contains high-voltage parts. Y ou may be seriously injured if you

touch them.
Avoid exposing your LCD display to direct sunlight or a nother he at source. Orient your LCD display away from direct
sunlight to reduce glare.
Always handle your LCD display with care when moving it.
Place your LCD display in a well-ventilated area. Do not pla ce a nything on your LCD display that prevents heat
dissipation.
Ensure the area around the LCD display is clea n and free of moisture.
Do not place heavy objects on the LCD display, video cable, or power cord.
If smoke, abnormal noise, or strange odor is present, i mmedi ately switch the LCD display off a nd call your dealer or
ViewSonic. It is dangerous to continue using the LCD display.

E
N
G
L

I
S
H

ViewSonic N2010 4

ANTENNA INSTALLATION INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product be sure the a ntenna or cable system is
grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides inf ormation with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding
electrodes, and requirements f or the grounding ele ctrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the a ntenna or cable system. This will prevent
damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord
during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off
you LCD and wait for the wether to improve.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be
fatal.

Cleaning the LCD Display

Make sure the LCD Display is turned off.
Never spray or pour any liquid directly onto the screen or case.

To clean the screen:

1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft,

lint-free cloth, and wipe the screen.

To clean the case:

1 Use a soft, dry cloth.
2 If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive

detergent onto a clean, soft, lint-free cloth, then wi pe the surface.

Disclaimer

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD display screen or
case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display.
ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

E
N
G
L

I
S
H

Getting Started

LCD TV Display
Power Cable (s)
V iewSonic User Guide
RF Cable

Congratulations on your purchase of a ViewSonic® LCD TV display. Important!

Save the original box and all packing material for futur e shipping needs.

Package Contents

Your LCD TV display package includes:

*SCART Cable or SCART Adapter
37-Key Remote Control with batteries
Quick Start Guide

ViewSonic N2010 5

Note: * SCART Cable is for Europe, SCART Adapter is for Pacific Asia.

E
N
G
L

I
S
H

Front View of the Product

Volume Down

Decrease sound volume or adjust a highlighted control while in OSD menu.

ViewSonic N2010 6

3

2

1

4
5
6

7
8
9

Volume Up

Increase sound volume or adjust a highlighted control while in OSD menu.

MENU

Turn OSD menu ON/OFF.

CH Down/ Scroll Down

Channel down when source is at TV or select a control while in OSD menu.

CH Up/ Scroll Up

Channel up when source is at TV or select a control while in OSD menu.

ENTER

Confirm Select.

Power button
Remote control receiver
Power LED indicator

8 9

7

1 2 3 4 5 6

E
N
G
L

I
S
H

Power (AC input)

Using cable provided, connect to a power source.

VGA signal input
Earphone output (light blue) and PC Audio input (light green)

Audio output

Connect this port to your external speaker.

YPbPr signal Audio input (left/right)

Connect the external audio into this ja ck.

AV/ S-Video signal Audio input (left/right)

Connect the external audio into this jack.

TV signal input

Connect to the antenna or cable servic

e.

SCART input

Connect the external video devices such as VCR, DVD and video game
into this jack.

I

H

G

F

E

D

C

B

A

AV Video input

Connect the external video devices such as VCR, DVD and video game
into this jack.

J

K

L

F

ViewSonic N2010 7

Rear View of the Product

A B C EJG

H

D

I

K

S-Video input

Connect the external video devices such as VCR, DVD and video game
into this jack.

YPbPr signal input

Connect the external video devices with component output to these jacks.

L

Cable manager

E
N
G
L

I
S
H

ViewSonic N2010 8

Remote Control

E
N
G
L

I
S
H

Remote control button function as follow

A
B
C
D
E
F

G

H
I
J
K
L

M

N
O

P
Q

POWER button

INFO button

SLEEP button

SOUND button

MUTE button

EXIT button

PIP INPUT button

PIP ON/OFF button

TV button

Input button

0~100+ number button

LAST button

UP/ DOWN/ Left/
Right/ ENTER button

Menu button

PIP SOUND button

PIP SIZE button

TELETEXT FUNCTION
CONTROL button

Power ON/OFF
Source and channel display
TV Sleep time setup
Switch sound sap type in TV mode
Mute ON/OFF
OSD exit

Select input source of sub-picture in PIP, PBP, Multi
Window condition

Activate or inactivate PIP function
Switch to TV input mode
Select Input Source
Input channel number
Return to previous channel

UP/DOWN for OSD function Select and Left/Right for
function adjust

VOL- and VOL+ button Adjust the Volume when
there is no OSD menu display
CH- and CH+ button Change the channel on
TV mode when there is no OSD menu display

Select OSD menu
Select the sound from main or sub picture of PIP/

PBP/Multi Window
Adjust the size of PIP sub-picture

Enter to teletext mode (next page)

ViewSonic N2010 9