ViewSonic VS10563-1M User Manual
N2010 LCDTV Display
User’s Guide
Guide de I’utilisateur
Guía de usuario
使用手冊
E
N
G
L
I
S
H
Contents
ViewSonic N2010 1
Product Registration.................................................................2
For Your Records.....................................................................2
Important Product Safety Instructions......................................3
Antenna Installation Instructions...............................................4
Cleaning the LCD Display.................................................4
Package Contents....................................................................5
Front View of the Product.........................................................6
Rear View of the Product..........................................................7
Remote Control.........................................................................8
Installation.................................................................................9
Getting Started
OSD Functions
Source Input-TV Mode.............................................................13
Source Input-YPbPr, AV, S-Video Mode..................................18
Other Information
Specifications...........................................................................20
Troubleshooting........................................................................21
Customer Support....................................................................22
Limited Warranty......................................................................23
Appendix
Safety Guidelines.....................................................................24
Compliance Information for U.S.A...........................................25
E
N
G
L
I
S
H
ViewSonic N2010 2
Copyright © ViewSonic Corporation, 2005. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you
may mail or fax to ViewSonic.
Product Registration
For Your Records
Product Name:
Model Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.
ViewSonic N2010
VS10563-1M
E
N
G
L
I
S
H
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
ATTENTION:
Follow and obey all warnings a nd in structions marked on your product a nd its operating instructions. For your safety,
plea se read all the safety a nd operating instructions bef ore you operate this product follow its operating and keep this
user guide for future reference.
INSTALLATION
1. Grounding or Polarization
Y our product may be equi pped with a polarized alternating-current line plug (a plug having one bla de wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature.If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your ele ctrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
2. Overloading
Do not overload wall outlets, extension cords, or integral convenience recepta cle s a s this ca n result in a ris k of f ire
or electric shock.
3. Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items pla ced upon or
against them, paying particular attention to cords at plugs, convenience recepta cles, a nd the point where they exit
from the product.
4. Ventilation
Slots and openings around the cabinet are provided f or ventilation.
T o ensure reli able operation of the product a nd to protect it from overhe ating, these openings must not be blocked or
covered.
Do not block the openings by placing the product on a bed, sofa, rug or other si milar surfa ce.
Do not place the product in a built-in installation such a s a bookcase or rack unless proper ventilation is provided or
the manufa cturer's instructions have been a dhered to.
5. Other Notices
Avoid exposure the N2010 to direct sunlight or high temperature.
Avoid exposure the N2010 to moisture or high humidity.
Do not attempt repair yourself. Your warra nty does not cover repair or atte mpted repair by a nyone not authorized
by ViewSonic.
If your N2010 will not be used for a long period of time, unplug the power cord and remove the batteries from the
remote control.
ViewSonic N2010 3
6. Precautions
Sit at least 20" from your LCD display.
Avoid touching the screen. Skin oils are difficult to re move.
Never remove the rear cover . Your LCD display contain s high-voltage parts. You may be seriously injured if you
touch them.
Avoid exposing your LCD display to direct sunlight or a nother he at source. Orient your LCD display away from direct
sunlight to reduce glare.
Always handle your LCD display with care when moving it.
Place your LCD display in a well-ventilated area. Do not pla ce a nything on your LCD display that prevents heat
dissipation.
Ensure the area around the LCD display is clea n and free of moisture.
Do not place heavy objects on the LCD display, video cable, or power cord.
If smoke, abnormal noise, or strange odor is present, i mmedi ately switch the LCD display off a nd call your dealer or
ViewSonic. It is dangerous to continue using the LCD display .
E
N
G
L
I
S
H
ANTENNA INSTALLATION INSTRUCTIONS
1. Outdoor Antenna Grounding
If an outside a ntenna or ca ble system is connected to the product be sure the a ntenn a or cable system is grounded
so as to provide some prote ction against voltage surges a nd built-up static charges, Article 810 of the National
Electrical Code, ANSI/NFP A 70, provides inf ormation with regard to proper grounding of the ma st and supporting
structure, grounding of the lead-in wire to a n antenna discharge unit, conne ction to grounding electrodes, a nd
requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended a nd unused f or long
periods of time, unplug it from the wall outlet a nd disconnect the a ntenna or ca ble system. This will prevent damage
to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a
heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off you LCD a nd
wait for the wether to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be
fatal.
ViewSonic N2010 4
Cleaning the LCD Display
Make sure the LCD Display is turned off.
Never spray or pour any liquid dire ctly onto the screen or case.
To clean the screen:
1 Wi pe the screen with a cle a n, soft, lint-free cloth. This remove s dust and other particles.
2 If still not clean, apply a small amount of non-ammonia, non-alcohol ba sed gla ss cle aner onto a clea n, soft,
lint-free cloth, and wipe the screen.
To clean the case:
1 Use a soft dry cloth.
2 If still not clean, apply a small a mount of a non-ammoni a, non-alcohol ba sed, mild non-abra sive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of a ny a mmonia or alcohol-based cleaners on the LCD display screen or
ca se. Some chemical clea ners have been reported to da mage the screen a nd/or ca se of the LCD display. ViewSonic
will not be liable f or da mage resulting from use of a ny a mmoni a or alcohol-ba sed clea ners.
E
N
G
L
I
S
H
Getting Started
LCD TV Display
Power Cord
ViewSonic User Guide
Congratulations on your purchase of a ViewSonic® LCD TV display. Important!
Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV display package includes:
29-Key Remote Control with batteries
Quick Start Guide
RCA A/V Cable
ViewSonic N2010 5
E
N
G
L
I
S
H
Front View of the Product
Volume down
Decrease sound volume or adjust a highlighted control while in OSD menu.
ViewSonic N2010 6
3
2
1
4
5
6
7
8
9
Volume up
Increase sound volume or adjust a highlighted control while in OSD menu.
MENU
Turn OSD menu ON/OFF.
CH down
Channel down when source is at TV or select a control while in OSD menu.
CH up
Channel up when source is at TV or select a control while in OSD menu.
ENTER
To highlight a control in OSD menu.
Power button
Remote control receiver
Power LED indicator
3 4 5
6
7
8 9
1 2
E
N
G
L
I
S
H
ViewSonic N2010 7
Rear View of the Product
Power (AC input)
Using cable provided, connect to a power source.
Cable manager
Audio output
Connect this port to your external speaker.
AV/ S-Video signal audio input (left/right)
Connect the external audio into this ja ck.
YPbPr signal audio input (left/right)
Connect the external audio into this ja ck.
TV signal input
Connect to the antenna or cable servic
e.
S-Video input
Connect the external video device such as VCR, DVD and video game into
this jack.
AV video input
Connect the external video devices such as VCR, DVD and video game
into this jack.
I
H
G
F
E
D
C
B
A
YPbPr signal input
Connect the external video devices with component output to these jacks.
J
Earphone output
A B ED FC
J
G
H
I
Loading...