ViewSonic VS10108 User Manual

Page 1
English
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
VS10108
VSCEPRSPEC6799
______________ ______________
ViewSonic SP5106v 103/17/04 B
Copyright©ViewSonic Corporation, 2004. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the
right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes abailable, please register your product on the Internet at: www.viewsonic.com.
Page 2
English
CAUTION:
This device has an external power adapter, the device must be operated
with that adapter. Be sure the power outlet is located near the unit, so that it is easily
Getting Started
Congratulations on your purchase of a ViewSonic® speaker system. Important! Save the original box and all packing material for future shipping needs.
Control Functions
accessible.
Wired Remote Control Box
1 - Power & Volume
Press the button to switch the power on and the LED will highlight in green.
If you turn right the knob until to the max that you will get the loudest volume.
2 - Treble
Turn right the button and you will get the high-pitched voice.
3 - Bass
Turn right from (-) mark to (+) mark that you will get louder and louder bass.
4 – Earphone
ViewSonic SP5106v 2
To plug in earphone when you want to use earphone.
Page 3
English
Rear Panel
5 - Input Signal Switch
Shrink the button and switch to 2.0 CH, extend the button and switch to 5.1 CH.
6 - Power
Press the on or off side to switch the power.
Rear Panel
ViewSonic SP5106v 3
Page 4
English
Specifications
ViewSonic SP5106v 4
Woofer Driver 5.25” (13.4cm) Satellites Driver Tweeter: 1” (2.54cm)
Micro Driver Full Range: 2.75” (7cm)
180Watt. RMS65Watt Frequency Range50 Hz ~ 20 KHz Amplifier Internal Function on the woofer Input Signal Switch Wired Remote Control Indicator Power Supplier External. Adaptor AC input Power: 100 ~ 240V
DC output Power: 19V/3.16A Connector Stereo jack / RCA DimensionWoofer: 300mm (H) x 150mm (W) x 250mm (D)
11.81” (H) x 5.9” (D) x 9.84” (D)
Satellites: 113mm (H) x 82mm (W) x 94.9mm (D)
4.44” (H) x 3.22” (W) x 3.73” (D)
Contents
THD <0.4%@-7dB RegulationsCCC, FCC-B, CB, CE, ICES003,
VCCI,BSMI,PSB,C-tick
Subwoofer × 1 Satellite × 5 (200cm cable attached for front R/L and
center, 600cm cable attached for rear R/L)
Adapter × 1
Power Cord (180cm) × 1
Wired Remote Control Box × 1
5.1 DIN stereo connector cable ( 200cm) x 1
Stereo Signal Cable (200cm) × 1
RCA Y Type Transfer Connector (21cm) × 1
User Guide x 1
Hook x 5
Power /
Power with Encoder / Volume / Bass / Treble / Earphone
Power On (Green) / Volume at max (Red)
SYSTEM POWER
Page 5
English
Troubleshooting
No sound from any speakers
• Power is not turned on
- Verify the AC line cord from the back of the Subwoofer and power adopter are plugged
• Volume setting is too low
- Verify the Power On switch has been pressed.
- Press the function key to raise the system Master Volume.
- Check volume level on computer sound card or alternate audio source device and set at mid level.
• Audio cable is not connected to audio source
-
• Audio cable connected to wrong output on audio source
- Make sure that the lime green 3.5 mm stereo jack is connected to the line-out of the audio source; make sure it is fully inserted.
Sound is distorted
• Volume level set too high
- Decrease the speaker system's master volume level.
• Windows volume control is set too high
- Adjust the Windows volume and balance controls to the center as a starting point, then use the speaker controller to adjust the volume.
• Sound source us distorted
- WAV files are often of poor quality. So distortion and noise are easily noticed with high-powered speakers. Try a different sound source like a music CD.
into the wall outlet.
No sound from Subwoofer
Problem with audio source device
- Test the speaker on another audio device. Remove the audio cable from the audio
device and connect it to the line-out on another audio device on the headphone another audio source device.
Subwoofer volume is too low
- Try adjusting sub volume to increase the Subwoofer volume.
Sound sourc e has very little low frequency content
- If listening to .WAV files over a computer sound card connection, t ry listening to a CD your computer CD or DVD player. .WAV files often have little low frequency content. music signal with more bass.
Connect audio cable from audio source, c heck plug connections on both s ubwoofer and source. Make sure thee signal cables are inserted firmly into the correct jacks.
ViewSonic SP5106v 5
Page 6
English
Limited Warranty
VIEWSONIC SPEAKER SYSTEM
ViewSonic SP5106v 6
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or
How long the warranty is effective:
ViewSonic Speaker, including the Driver, are warranted for one (1) year for all parts and one
(1) year for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer
You will need to provide your product's serial number.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e)
the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center,
ontact ViewSonic.
Support.
components.
Page 7
English
Exclusion of damages:
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. VIEWSONICSHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR
OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on implied warranties and/or do not allow theexclusion of incidental or consequential damages, so the above limitations and
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer.
ViewSonic Speaker System (V1.0) ReleaseDate: 07-08-2003
exclusions may not apply to you.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
ViewSonic SP5106v 7
Page 8
English
Telephone / Fax
Customer Support
www / E-mail address
Country or Region
United States
Canada
United Kingdom
Ireland
Europe, Middle East, Baltic countries and North Africa
Australia and New Zealand
Singapore/Malaysia/Thailand
South Africa/Other countries
Hong Kong
www.viewsonic.com/support
service.us@viewsonic.com
www.viewsonic.com/support
service.ca@viewsonic.com
www.viewsoniceurope.com
service.eu@viewsoniceurope.com
www.viewsoniceurope.com
service.eu@viewsoniceurope.com
www.viewsoniceurope.com
service.eu@viewsoniceurope.com
www.viewsonic.com.au
service@au.viewsonic.com
www.viewsonic.com.sg
service@sg.viewsonic.com
www.viewsonic.com.tw
service@sd.viewsonic.com
www.hk.viewsonic.com
service@hk.viewsonic.com
(800) 688-6688 (909) 468-1202
(800) 688-6688 (909) 468-1202
0800 833 648 (01293) 643910
Contact your reseller
Contact your reseller
+ 61 2 9906 6277 + 61 2 9906 6377
+ 65 6273 4018 + 65 6273 1566
+ 886 (2) 2246-3456 + 886 (2) 8242-3668
+ 886 (2) 2246-3456 + 886 (2) 8242-3668
ViewSonic SP5106v
8
Appendix
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to redio communications. However, there is no guarantee that interference will not occur in a perticular installation. If this equipment does cause harmful interference radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord
and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
Compliance Information for U.S.A.
Loading...