ViewSonic VS10090 Service Manual

Page 1
Model No. VS10090
15” Color TFT LCD Display
Service Manual
ViewSonic VX510-1
ViewSonic
381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Page 2
Copyright
Copyright
¤
2004 by ViewSonic Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes.
Trademarks
ViewSonic is a registered trademark of ViewSonic Corporation. All other trademarks used within this document are the property of their respective owners.
Optiquest is a registered trademark of ViewSonic Corporation.
Revision History
Revision Date Description Of Changes Approval
i
ViewSonic Corporation Confidential
-
Do Not Copy VX510
1a 05/27/04 Initial Release DCN-4473 Angela Lu
Page 3
TABLE OF CONTENTS
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
6. Trouble Shooting Flow Chart
9. Block Diagram
10. Schematic Diagrams
7. Recommended Spare Parts List
1. Precautions and Safety Notices
5. Adjusting Procedure
8. Exploded Diagram And Spare Parts List
11. PCB Layout Diagrams
1
4
10 16
17
28 32
35 38 39
46
ii
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 4
1. Appropriate Operation
(1) Turn off the product before cleaning. (2) Use only a dry soft cloth when cleaning the LCD panel surface. (3) Use a soft cloth soaked with mild detergent to clean the display housing. (4) Use only high quality and safety approved AC/DC power cord. (5) Disconnect the power plug from AC outlet if the product is not used for a long period of time. (6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off. (7) Do not touch the LCD panel surface with sharp or hard objects. (8) Do not place heavy objects on the LCD display, video cable, or power cord. (9) Do not use abrasive cleaners, waxes or solvents for your cleaning. (10) Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
exposed in such areas as the associated transformer circuits.
4. LCD Module Handling Precautions
4.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it. (2) Be sure to turn off power supply when inserting or disconnecting from input connector. (3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. (4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. (6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. (7) Do not open nor modify the Module Assembly. (8) Do not press the reflector sheet at the back of the module to any directions. (9) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL
Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
1. Precautions and Safety Notices
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist nor
bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that
no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
1
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 5
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or
regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
4-2 Handling and Placing Methods
Correct Methods Incorrect Methods
Only touch the metal frame of the LCD panel or the front cover of the monitor. Do not touch the surface of the polarizer.
Surface of the LCD panel is pressed by fingers. That may cause “mura”.
Take out the monitor with cushions. Take out the monitor by grasping the LCD panel. That may
cause “mura”.
2
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 6
Place the monitor on a clean and soft foam pad. Placing the monitor on foreign objects. That may scratch
the surface of the panel, or cause “mura”.
The panel is placed face-down on the lap. That may cause
“mura”.
3
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 7
GENERAL REQUIREMENTS
2-1. GENERAL SPECIFICATION
Test Resolution & Frequency 1024x768 @ 60Hz Test Image Size Full Size
Contrast and Brightness Controls
Factory Default: Contrast = 70%, Brightness = 100%
2-2. VIDEO INTERFACE
Analog Input Connector DB-15 (Analog), Digital Input Connector DVI-D (Digital) :N/A Default Input Connector Defaults to the first detected input Video Cable Connector DB-15 Pin out Compliant DDC 1/2B
Video Signals
1.Video RGB (Analog) Separate, Composite, and
Sync on Green Video Impedance 75 Ohms (Analog) Exclusions Not compatible with interlaced video
2-3. POWER SUPPLY
Internal Power Supply Part Number: DIAPAR002D22 Input Voltage Range 90 to 264 VAC Input Frequency Range 47.5 to 63 Hertz Short Circuit Protection Output can be shorted without damage Over Current Protection 8 A typical at 5 VDC Leakage Current 0.7mA (Max) at 254VAC / 60Hz Efficiency 75% typical at 115VAC Full Load Fuse Internal and not user replaceable Power Dissipation 18.5Watts (typ),30Watts(Max.)
2-4. ELECTRICAL REQUIREMENT
Horizontal / Vertical Frequency
Horizontal Frequency 30 – 60 KHz Vertical Refresh Rate 50 – 75Hz. Maximum Pixel Clock 80 MHz Primary Preset 1024x768 @ 60Hz
Timing Table
Timing -- Analog --
Item Resolution
1 640 x 350 @ 70Hz, 31.5kHz 2 640 x 400 @ 70Hz, 31.5kHz 3 640 x 480 @ 60Hz, 31.5kHz
2. Specification
4
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 8
5 640 x 480 @ 72Hz, 37.9kHz 6 640 x 480 @ 75Hz, 37.5kHz 7 640 x 480 @ 85Hz, 43.27kHz 8 720 x 400 @ 70Hz, 31.5kHz 9 800 x 600 @ 56Hz, 35.1kHz
10 800 x 600 @ 60Hz, 37.9kHz
11 800 x 600 @ 75Hz, 46.9kHz 12 800 x 600 @ 72Hz, 48.1kHz 13 800 x 600 @ 85Hz, 53.7kHz 14 832 x 624 @ 75Hz, 49.7kHz 15 1024 x 768 @ 60Hz, 48.4kHz 16 1024 x 768 @ 70Hz, 56.5kHz 17 1024 x 768 @ 72Hz, 58.1kHz 18 1024 x 768 @ 75Hz, 60.0kHz 19 1024 x 768 @ 85Hz, 68.67kHz
Remark: Fv: 76Hz ~ 85Hz can be supported, not guarantee.
Changing Modes
Maximum Mode Change Blank Time for image stability Note:
1.
2.
3.
Excluding Auto Adjust” time Under DOS mode (640 x 350, 720 x 400 & 640 x
400), there is no “Auto Adjust” feature. The monitor needs to do “Auto Adjust” the first time a new mode is detected
Under 5 seconds (Max), 1 seconds (Typ.),for recognized timings 1-2 seconds(Typ.),for under-recognized timings
2-5. LCD Panel Panel Characteristics
Panel T ype HANNSTAR HSD150SX84-G Type Color TFT Active Matrix XGA LCD Active Size 304.1 (H) x 228.1 (V) Pixel Arrangement RGB V ertical Stripe Pixel Pitch 0.297 mm(H) x 0.297mm (V) Glass Treatment Anti Glare (Hard coating 3H) # of Backlights 2 CCFL edge-light (1 top / 1 bottom) Backlight Life 40,000Hours (Typ) / 30,000 Hours (Min)
Luminance Condition: CT = 6500K, Contrast = Max, Brightness = Max
250 cd/m2 (Typ after 30 minute warm up) 200 cd/m2 (Min after 30 minute warm up)
Brightness Uniformity
L5=Max 1.3 L5 = Maximum Luminance / Minimum Luminance
5
ViewSonic Corporation Confidential
-
Do Not Copy VX510
4 640 x 480 @ 67Hz, 35.0kHz
Page 9
Contrast Ratio 450:1 (Typ), 300:1 (Min) Color Depth 262, 144 colors (6 bit panel) Viewing Angle (Horizontal) 120 deg @ CR>10, 150 deg @ CR>5 Viewing Angle (Vertical) 100 deg @ CR>10, 115 deg @ CR>5 Response Time 10%-90% @ Ta=25°C
25 ms (Tr +Tf ) (Typ) 35 ms (Tr +Tf ) (Max)
2-6. MECHANICAL Dimension (Desktop)
Width 353.69 mm Height 387.69 mm Depth 169.51 mm Depth (Head only) 59.5mm Monitor Weight 3.4 kg / 7.5 lbs
Ergonomics
20 DEGREES MINIMUM Tilt Up 5 degrees Tilt Down
Package Specifications
Width 417 mm Height 480 mm Depth 223 mm Cross Weight 5.1 kg / 11.2 lbs
2-7. ENVIRONMENTAL
Environmental
Operating Temperature 0°C to +40°C Storage Temperature -20°C to +60°C Operating Relative Humidity 10% to 80% RH Non-Condensing
Storage Relative Humidity 10% to 90% RH Non-Condensing Operating Altitude 0 to +3,000 meters Storage Altitude 0 to +12,000 meters
6
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 10
2-8 Analog EDID
Time: 08:46:29 Date: Fri Nov 14, 2003 ______________________________________________________________________ ______________________________________________________________________ VIEWSONIC CORPORATION
EDID Version # 1, Revision # 3
DDCTest For: ViewSonic VX510 ______________________________________________________________________ ______________________________________________________________________ 128 BYTES OF EDID CODE:
0 1 2 3 4 5 6 7 8 9
________________________________________
0 | 00 FF FF FF FF FF FF 00 5A 63 10 | 19 64 01 01 01 01 01 0D 01 03 20 | 0E 1E 17 78 2A 71 D6 A2 56 49 30 | 96 24 13 4F 54 BF EE 00 01 01 40 | 01 01 01 01 01 01 01 01 01 01 50 | 01 01 01 01 64 19 00 40 41 00 60 | 26 30 18 88 36 00 30 E4 10 00 70 | 00 18 00 00 00 FF 00 50 33 30 80 | 30 33 30 31 30 30 30 30 31 0A 90 | 00 00 00 FD 00 32 50 1E 3C 08
100 | 00 0A 20 20 20 20 20 20 00 00 110 | 00 FC 00 56 58 35 31 30 0A 20 120 | 20 20 20 20 20 20 00 70
______________________________________________________________________ (08-09) ID Manufacturer Name = VSC (11-10) Product ID Code = 6419 (12-15) Last 5 Digits of Serial Number = Not Used (16) Week of Manufacture = 01 (17) Year of Manufacture = 2003 (10-17) Complete Serial Number = See Descriptor Block (18) EDID Version Number = 1 (19) EDID Revision Number = 3 (20) VIDEO INPUT DEFINITION: Analog Signal
0.700, 0.300 (1.000 Vp-p) Separate Syncs, Composite Sync, Sync on Green
7
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 11
(21) Maximum Horizontal Image Size = 300 mm
(22) Maximum Vertical Image Size = 230 mm
(23) Display Gamma = 2.20
(24) Power Management and Supported Feature(s):
Active Off/Very Low Power, Preferred Timing Mode
Display Type = R/G/B Color
(25-34) CHROMA INFO:
Red X - 0.634 Green X - 0.285 Blue X - 0.144 White X - 0.310
Red Y - 0.339 Green Y - 0.587 Blue Y - 0.075 White Y - 0.330
(35) ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36) ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
(37) Manufacturer's Reserved Timing:
None Specified
(38-53) Standard Timing Identification:
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
8
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 12
______________________________________________________________________ (54-71) Detailed Timing / Descriptor Block 1: 1024x768 Pixel Clock: 65.00 MHz ______________________________________________________________________ Horizontal Image Size: 304 mm Vertical Image Size: 228 mm Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal: Active Time: 1024 pixels Blanking Time: 320 pixels Sync Offset: 24 pixels Sync Pulse Width: 136 pixels Border: 0 pixels Frequency: 48.36 KHz Vertical: Active Time: 768 lines Blanking Time: 38 lines Sync Offset: 3 lines Sync Pulse Width: 6 lines Border: 0 lines Frequency: 60.00 Hz Digital Separate, Horizontal Polarity (-) Vertical Polarity (-) ______________________________________________________________________ (72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number: P30030100001 ______________________________________________________________________ (90-107) Detailed Timing / Descriptor Block 3: Monitor Range Limits: Min Vertical Freq - 50 Hz Max Vertical Freq - 80 Hz Min Horiz. Freq - 30 KHz Max Horiz. Freq - 60 KHz Pixel Clock - 80 MHz Secondary GTF - Not Supported ______________________________________________________________________ (108-125) Detailed Timing / Descriptor Block 4: Monitor Name: VX510 (126) No Extension EDID Block(s) (127) CheckSum OK
9
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 13
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OnView® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9.
Front Control Panel shown below in detail
Main Menu With OnView controls
Scrolls through menu options and adjusts the displayed control.
Also a shortcut to display the Contrast adjustment control screen.
Power On/Off
Displays the control screen for the highlighted control.
Also toggles between two controls on some screens.
Power light Green = ON Orange = Power
Saving
Displays the Main Menu or exits the control screen and saves adjustments
1
2
3. Front Panel Function Control Description
10
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 14
Do the following to adjust the screen image:
1
To display the Main Menu, press button [1].
NOTE:
All OnView menus and adjustment screens disappear automatically
after about 30 seconds.
2
To select a control you want to adjust, press ▲ or ▼ to scroll up or down the Main Menu.
3
After the control is selected, press button [2]. A control screen like the one shown below appears.
4
To adjust the control, press the up ▲ or down ▼ buttons.
5
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
•Adjust your computer's graphic card so that it outputs a video signal 1024 x 768 @ 60 Hz to the LCD display. (Look for instructions on “changing the
refresh rate” in your graphic card's user guide.)
If necessary, make small adjustments using H POSITION and V POSITION until the screen image is completely visible
. (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.)
The line at the bottom of the screen tells you what you can do next: Exit or select the Brightness control.
1: Exit 2 : Brightness
Contrast
11
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 15
Main Menu Controls
Adjust the menu items shown below by using the up ▲ and down ▼ buttons.
Control Explanation
Auto Image Adjust
automatically sizes, centers, and fine tunes
the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image.
If this function does not work on your LCD display, then
lower the video refresh rate to 60 Hz and set the resolution
to its
Contrast
adjusts the difference between the image background
(black level) and the foreground (white level).
Brightness
adjusts background black level of the screen image.
pre-set value.
functions are not available for DVI input.
NOTE:
1. Auto Image Adjust works with most common video cards.
2. The Auto Image Adjust and most Manual Image Adjust
12
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 16
Color Adjust
provides several color adjustment modes: preset
color temperatures and
RGB
which allows you to adjust red (R), green (G), and blue (B) separately. The factory setting for this product is 6500K (6500 Kelvin).
9300K
— Adds blue to the screen image for cooler white (used
in most office settings with fluorescent lighting).
6500K
— Adds red to the screen image for warmer white and
richer red.
5400K
— Adds green to the screen image for a darker color.
User Color
— Individual adjustments for red (R), green (G),
and blue (B)
.
1
To select color (R, G or B) press button [2].
2
To adjust selected color, press ▲ or ▼.
Important
: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset.
Control Explanation
SRGB
9300K 6500K 5400K User Color
Color Adjust
sRGB
sRGB is quickly becoming the industry standard for color management, with support being included in many of the latest applications. Enabling this setting allows the LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled.
13
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 17
Information
displays the timing mode (video signal input) coming from the graphics card in your computer. See your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency).
NOTE:
VESA 1024 x 768 @ 60 Hz (recommended) means
that the resolution is 1024 x 768 and the refresh rate is 60 Hertz.
Manual Image Adjust
displays the Manual Image Adjust menu.
The
Manual Image Adjust
controls are explained below:
Horizontal Size
adjusts the width of the screen image.
Horizontal Position
moves the screen image left or right.
Vertical Position
moves the screen image up or down.
Fine Tune
sharpens focus by aligning the illuminated text and/
or graphic characters.
Sharpness
adjusts the clarity and focus of the screen image.
Control Explanation
H . / V . Position
Manual Image Adjust
1: Exit 2 : Select
H . Size Fine Tune
Sharpness
H. Frequency: 31.47 KHz
Information
V. Frequency: 31.47 Hz Pixel Clock: 24.80 MHz Resolution: 640 x 480 Model No. : Serial No. :
www.viewsonic.com
1: Exit
14
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 18
Setup Menu
displays the menu shown below.
The
Setup Menu
controls are explained below:
Language
allows you to choose the language used in the menus
and control screens.
Resolution Notice
displays the Resolution Notice menu shown
below.
Resolution Notice
advises the optimal resolution to use.
OSD Position
allows you to move the on-screen display menus
and control screens.
OSD Timeout
sets the length of time an on-screen display screen is displayed. For example, with a “15 second” setting, if a control is not pushed within 15 seconds, the display screen disappears.
OSD Background
allows you to turn the On-Screen-Display
background on or off.
Control Explanation
Memory Recall
returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed in this user guide.
Exception:
This control does not affect changes made with the
User Color control, Language and Power Lock setting.
Language Select
Setup Menu
Resolution Notice OSD Position OSD Time Out OSD Background
1: Exit
For best picture quality, change the resolution to 1024 x 768
RESOLUTION NOTICE
1 : Exit
Press "1" to clear message Press "2" to disable message
15
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 19
MCU
The Winbond W78E65 is an 8-bit microcontroller which has in-system programmable FLASH EPROM for firmware updating. The instruction set of the W78E65 is fully compatible with the standard 8052. The W78E65 contains a 64K bytes of main FLASH EPROM to be updated by the loader program located at the 4KB auxiliary FLASH EPROM; four 8-bit ib-directional and bit-addressable I/O ports; three 16-bit timer/counters; a serial port. The W78E65 allows user to modify firmware by using ISP function. Once the code is confirmed, the user can protect the code for security.
RTD2011B
The RTD2011B is a graphic processing IC for Liquid Crystal Display (LCD) monitors, It support up to 110MHz (XGA@85Hz). On-chip functions include a 8-bit triple-channel 110MHz ADC, PLL, 8-bit, a high quality zoom scaling engine, Sharpness/Smooth filter enhancement, digital color processor, embedded on-screen display (OSD) controller support multi-language. In output interface, it can support TTL, Reduced Swing Differential Signaling (RSDS) data bus type 1~3.and programmable TCON function.
5C
48D
IIC
24.576MHz
RTD2011B
Flat Panel Display
5C
48D
TCON
48D
5C
LCD Panel
Row/Column
Driver
TTL Signal LCD Panel
RSDS Signal
LCD Panel
VS
R/G/B
HS
1C
Video
Decoder
8
D
DDC
MCU
4. Circuit Description
16
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 20
1. Function Test
1.1 Product
- 15” LCD monitor
1.2 Test Equipment
-Color Video Signal & Pattern (or PC with XGA resolution)
1.3 Test Condition
Before function test and alignment, each LCD monitor should be warmed up for at least 30 minutes with the following conditions: (a) In room temperature, (b) With full-white screen, RGB, and Black (c) With cycled display modes, 640*480 (H=43.27kHz, V=85Hz) 800*600 (H=53.7kHz, V=85Hz) 1024*768 (H=68.67, V=85Hz)
1.4 Test Display Modes & Pattern
1.4.1 Compatible Modes
1. 640 x 350@ 70Hz, 31.5kHz 12. 800 x 600@ 72Hz, 48.1kHz
3
. 640 x 480@ 60Hz, 31.5kHz
13. 800 x 600@ 85Hz, 53.7 kHz
4
. 640 x 480@ 67Hz, 35.0kHz
14. 832 x 624@ 75Hz, 49.7kHz
6. 640 x 480@ 75Hz, 37.5kHz
15. 1024 x 768@ 60Hz, 48.4kHz
5. 640 x 480@ 72Hz, 37.9kHz 16. 1024 x 768@ 70Hz, 56.5kHz
7
. 640 x 480@ 85Hz, 43.27kHz
17. 1024 x 768@ 72Hz, 58.1kHz
8
. 720 x 400@ 70Hz, 31.5kHz
18. 1024 x 768@ 75Hz, 60.0kHz
9
. 800 x 600@ 56Hz, 35.1kHz
19. 1024 x 768@ 85Hz, 68.67kHz
10. 800 x 600@ 60Hz, 37.9kHz
11. 800 x 600@ 75Hz, 46.9kHz
5. Adjusting Procedure
17
ViewSonic Corporation Confidential
-
Do Not Copy VX510
2. 640 x 400@ 70Hz, 31.5kHz
Page 21
1.4.2 Function Test Display Pattern
Item Test Content Pattern Specification Remark
1 Frequency & Tracking Fine Line Moire Eliminate visual wavy noise. Figure1 2 Contrast/Brightness 16Gray Scale 16 gray levels should be
distinguishable.
Figure2
3 Boundary Horizontal & Vertical
Thickness
Horizontal and Vertical position Of video should be adjustable to Be within the screen frame.
Figure3
4 RGB Color Performance RGB Color Intensities Contrast of each R,G,B,color
Should be normal.
Figure4,5,6
5 Screen Uniformity & Flicker Full White Should be compliant with the spec. Figure7
6 Dead Pixel/Line White Screen & Dark Screen The numbers of dead pixels should
Be compliant with the spec.
Figure7,8
7 White Balance White & Black Pattern The screen must have the pure white
And black pattern, no other color.
Figure9
18
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 22
19
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 23
1.5 Function Test and Alignment Procedure
1.5.1 All Modes Reset
You should do “Memory Recall’’on Main Menu first.This action will allow you to erase all end-user’s settings and restore the factory defaults.
1.5.2 Auto lmage Adjust Please select and enterAuto Image Adjust’’function on Main menu to see if it workable.
TheAuto Image Adjust’’function is aimed to offer a better screen quality by built- In ASIC . For optimum screen quality, the user has to adj
ust each function manually.
1.5.3 Firmware Test Pattern:Burn In Mode
-Mark sure the F/W is the latest version.
1.5.4 DDC Test Pattern:EDID program
-Make sure it can pass test program.
1.5.5 Fine Tune and Sharpness Test Signal:1024*768@60Hz
Test Pattern:Line Moire Pattern
-Check and see if the i
mage has noise and focus performs well.Eliminate visual line bar.
-If not,readjust by the following steps: (a) Select and enter“Fine Tune’’function on“Manual Image Adjuet’’to adjust the
image to adjust the image to eliminate visual wavy noise.
(b) Then, selsct and enter“Sharpness’’fnuction to adjust the clarity and focus.
1.5.6 Boundary Test Signal:1024*768@60Hz
Test Pattren:Horizontal & Vertical Line Thickness Pattern
-Check and see if the image boundary is within screen frame.
-If not, readjust by the following steps: (a) Select and enter “Manual Image Adjuet’’ function on OSD Main Meun. (b) Then, select and enter“Horizontal Size’’or“Horizontal/Vertical Position’’
function to adjust the video boundty to be full scanned and within screen frame.
20
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 24
1.5.7 White Balance Test Signal:640*480@60Hz
Test Pattern:White and Black Pattern
1.5.8 RG BColors Contrast Test Signal:1024*768@60Hz Test Pattern:R,G,B,Color Intensities Pattern and 16 Gray Scale Pattern
-Check and see if each color is normal and distinguishable.
-If not,please return the unit to repair area.
1.5.9 Screen Uniformity and Flicker Test Signal:1024*768@60Hz
Test pattern:Full White Pattern
-Check and see if it is in normal condition.
1.5.10 Dead Pixel and Linegnal Test Signal:1024*768@60Hz
Test Pattern: Dark and White Screen Pattern
-Check and see if there are dead pixels on LCD panel with shadow gauge and filter film.
-The total numbers and distance of dead pixels should be compliant with the spec.
1.5.11 Mura Test Pattern:White,GRB,Black,&Gary
T est Tool:5%ND Filter.
1.5.12 Check for Secondary Display Modes Test Signal: Analog:640*350@70Hz;640*480@60/67/72/75/85Hz 720*400@70Hz;800*600@56/60/72/75/85Hz 832*624@75Hz,1024*768@60/70/72/75/85Hz
-Normally when the primary mode1024*768@60Hz is well adjusted and compliant with the specification,the secondary modes will also be compliant with the spec.But we still have to check with the general test pattern to make sure every secondary is compliant with the specification.
1.5.13 All Modes Reset After final QC step,we have to erase all saved changes again and restore the factory defaults.You should do“All mode Reset’’again.
1.5.14 Power Off Monitor Turn off the monitor by pressing“Power’’ button.
21
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 25
2 Adjusting Procedure - Firmware Upgrade Procedure
When you receive the returned monitor, please check whether the firmware version is the latest. If not, please do the following procedures to upgrade it to the latest version.
2-1 Equipment Needed
-VX510 Monitor
-Fixture for Firmware upgrade
-Power adapter *1 for Fixture
-VGA Cable *2
-PC (Personal Computer)
-Com port Cable *1
-Firmware Upgrade program
-One additional monitor for checking the program execution
VX510 Fixture
VGA Cable PC
22
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 26
Com port Cable Power Adapter for Fixture
2-2 Setup Procedure
2.2.1 Connect P3 of fixture with Com port of PC by Com port Cable.
2.2.2 Connect P1 of fixture with VX510 Monitor by VAG Cable.
2.2.3 Connect P2 of fixture with PC VGA output by VAG Cable.
2.2.4 Plug Power Adapter to fixture.
2.2.5 Connect Power Card to VX510 Monitor.
2.2.6 Connect PC to the additional monitor.
23
ViewSonic Corporation Confidential
-
Do Not Copy VX510
JP1:to
Power
Adapter
Page 27
2.2.7 Run “RTDTOOL”file
2.2.8 Choose ”Winboad 62/65B” and then push “SET” button
24
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 28
2.2.9 Push “File Bin” button and then choose the latest firmware that we want to upgrade
25
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 29
Step 1. Let VX510 enter ISP mode
1.1 Press Menu key (keep on) than plug power to VX510 monitor after 2-3 second, and release away Menu key.
1.2 Press “Connect ” then enter the ISP mode.(software will show “Link success¨ if we enter the ISP mode successful)
26
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 30
Step 2 Push “Program” button and start to enter upgrade process
Step 3. Upgrade successful
27
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 31
This chapter provides technicians and people who have an electronic background a primary description about
maintaining the product. Moreover, you can get the appropriate operation to solve some complicated problems of component repairing and professional problems.
1. Equipment Needed
- VX510 Monitor
- Philips Screw Driver # 101 and # 107
- Electronic Hex Nut M5 mm
- PC with XGA resolution
2. Main Procedure
Power-on
S
tart
Power LED OK ?
Is Display
Performance OK?
Is Function
adjustment OK?
End
A. Power Circuit Troubleshooting
B. Performance Troubleshooting
C. Function Troubleshooting
No
Yes
Yes
Yes
No
No
6. Trouble Shooting Flow Chart
28
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 32
2.1 A. Power Circuit Troubleshooting
2.2 B. Performance Troubleshooting
Change
Power Board
Start
Change Video Board
End
No
Yes
Change
Power Board
Is screen White ?
Is screen Black ?
Start
Change
Video Board
Change
LCD
Panel
Yes Yes
Yes
No
Abnormal Color ?
1
No No
Replug or Change FFC cable
Change
Video Board
Change
LCD
Panel
Yes Yes Yes
No No
Change
Video
Board
No
No
Change
LCD
Panel
Yes Yes
No
29
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 33
1
Is Lcd line defective ?
Mura ?
Is screen scrolling ?
Is screen flickering ?
Ghost image ?
Have line bar or
noise ?
Bad uniformity ?
Change Lcd Panel
Change Lcd Panel
Change VGA Cable
Change Video Board
Change Video Board
Change Lcd Panel
Change Power Board
Change Lcd Panel
Change Power Board
Change Video Board
End
Notice 1
Adjust sharpness or auto
Notice 2
Change Video Board
Yes
Yes
No
No
Yes
Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes Yes
Yes
No
No
No
No
No
No
No
No
No
No No No
30
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 34
Notice:
1. Make sure VGA cable connected to PC directly, not via anything like “data transfer “ or “ distribution".
After this action if ghost image disappears , go to “ yes”; else go to “ no”.
2. Check the compatibility on the computer. If it is compatibility problem, feedback the information to
ViewSonic ; else , go to “ no”
2.3 C. Function Troubleshooting
Start
Change Button Board
Change Video Board
End
No
Yes
31
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 35
Item VS P/N Arima P/N Description Q'ty Lead Time
N/A K0015001000000 BASIC UNIT VX510 1
1 M-SCW-0824-0856 700473300-1000 SCREW TAPPING 3.0*10L P-HEAD P-TITE-ZN/B 6 10 days
N/A K0015012000000 LCD PANEL ASSY VX510 1
2 B-CB-0206-0189 40-VF000T-C000 PWA BUTTON BOARD VF000 1 2 weeks 3 C-FP-0301-0997 K0015028000000 BEZEL SUB-ASSY VX510 1 4 weeks
N/A K0015028000001 CHASSIS SUB-ASSY VX510 1
4 M-BK-0805-0082 K5120000000003 CHASSIS FRAME VX510 1 3 weeks 5 M-MS-0808-9478 K5120000000010 SHIELDING VX510 1 3 weeks 6 M-SCW-0824-0857 703014250-2500 SCREW PH M2.5*0.45 L4(DIA=4.5 T=0.8) 6 10 days 7 M-SCW-0824-0858 702114300-0600 SCREW MACHINE M3*6L B HEAD NI 9 10 days 8 M-SCW-0824-0859 700114303-0800 SCREW M3*8L P-HEAD W/SP+FLATE WASHER NI 1 10 days
9 M-LCD-0826-0225 37-125150-4900 LCD TFT 15.0" XGA HSD150SX84-G HANNSTAR 1 8 weeks 10 B-VB-0202-0355 40-VF0009-C000 PWA VIDEO BOARD VF000 1 2 weeks 11 B-PS-0204-0072 83-110119-0000 AC POWER SUPPLY&DC-AC INVERTER W/VF000 1 45 days 12 M-MS-0808-9479 32-000080-0000 CORE PL2508IG 25.5*15*4.5mm FOR VF000 2 45 days 13 M-FC-0809-0816 K5052000000000 CABLE ASSY FFC (40*56) VX510 2 30 days 14 M-MS-0808-9480 77X014006-4800 STANDOFF#4-40 H4.8(L7.0 THREAD)HEXA-4.75 2 10 days 15 TBD K5120000000012 INSULATOR FOR SHIELDING VX510 2 2 weeks 16 TBD 700114406-0800 MACHINE SCREW M4*L8 PH W/EX TOOTH WASHE 1 10 days 17 TBD K5310000000008 LABEL FOR WARNING-HIGH VOLTAGEL VX510 1 2 weeks 18 TBD K5110000000015 AL FOIL FOR INVERTER WIRE OF PANEL VX510 1 TBD 19 M-FC-0809-0817 21-5H0001-0000 CABLE ASSY HARNESS 8P*8P 140mm W/VF000 1 30 days 20 M-SCW-0824-0860 702472300-0800 TAPPING SCREW 3.0*8L B HEAD P TITE Zn YL 10 10 days
N/A K0015013000000 REAR COVER ASSY VX510 1
21 M-SCW-0824-0861 700374400-1200 SCREW TAPPING 4.0*12L P-HEAD B-TITE N 2 10 days 22 M-MS-0808-9481 K5110000000014 RUBBER WALL MOUNT PLUG(BLACK) VX510 4 2 weeks 23 M-MS-0808-9482 K5120000000004 PLATE HINGE VX510 1 3 weeks 24 M-MS-0808-9483 K5120000000006 PLATE WALL MOUNT VX510 4 3 weeks 25 M-WR-0828-0757 21-5W0000-0000 WIRE 1015 #18 AWG 100mm DA7835 GR/YEL 1 45days 26 C-BC-0302-0600 K0015028000002 COVER BACK SUB-ASSY VX510 1 4 weeks
N/A K0015013000001 STAND ASSY VX510 1
27 M-SCW-0824-0862 700114401-0800 SCREW MACHINE M4*8L P-HEAD W/SP WASHER 4 10 days 28 M-CV-0830-0324 K5110000000005 BASE-TOP (SILVER) VX510 1 4 weeks 29 M-CV-0830-0325 K5110000000006 BASE BOTTOM (BLACK) VX510 1 4 weeks 30 M-CV-0830-0326 K5110000000009 COVER FRONT BASE(BLACK) VX510 1 4 weeks 31 M-MS-0808-9484 K5110000000011 CLAMP FOR AC D-SUB CABLE(PIN GOOD)CKK 05 2 4 weeks 32 M-MS-0808-9485 K5110000000013 RUBBER FOOT(GRAY)VX510 6 2 weeks 33 M-BK-0805-0083 K5120000000001 BRACKET L VX510 1 3 weeks 34 M-BK-0805-0084 K5120000000002 BRACKET R VX510 1 3 weeks 35 M-MS-0808-9486 K5120000000007 PLATE WEIGHT L(172.13) VX510 1 3 weeks 36 M-MS-0808-9487 K5120000000009 PLATE WEIGHT S(78.3) VX510 2 3 weeks 37 M-MS-0808-9488 K5120000000011 HINGE VX510 1 3 weeks 38 TBD K5120000000013 PORON FOR PLATE WEIGHT VX510 2 2 weeks 39 M-SCW-0824-0862 700114401-0800 SCREW MACHINE M4*8L P-HEAD W/SP WASHER 2 10 days 40 M-CV-0830-0327 K5110000000007 COVER FOR AC D-SUB (BLACK) VX510 1 4 weeks 41 M-CV-0830-0328 K5110000000008 COVER FOR BASE CABLE (BLACK) VX510 1 4 weeks
N/A K0015014000003 PACKING KIT VSA/VSAP (M) VX510 1
42 A-VC-0101-0378 21-5D0000-0000 CABLE ASSY D-SUB 15P H/D 9C W/CORE 1 10 weeks 43 A-PC-0106-0328 21-900212-0000 AC POWER CORD USA 3C BLACK W/VF000 1 30 days 44 M-MS-0808-9496 K0015020000000 VIEWSONIC QSG W/CD W/PE BAG VX510 1 3 weeks 45 M-LB-0813-1005 K5310000000001 SMALL LABEL 40*25 VX510 1 2 weeks 46 M-LB-0813-1006 K5310000000002 ID LABEL 108*48.9 VX510 1 2 weeks 47 M-LB-0813-1007 K5310000000003 UPC LABEL 76.2*76.2 VX510 1 2 weeks 48 M-LB-0813-1008 K5310000000004 HI-POT PASS LABEL VX510 1 2 weeks 49 M-LB-0813-1009 K5320000000001 NAME PLATE VIEWSONIC FRONT(E015-016-1)VX 1 10 days 50 M-LB-0813-1010 K5320000000002 LOGO BIRD FRONT(E015 004)AL7.9H VX510 1 10 days 51 M-LB-0813-1011 K5320000000003 LOGO VIEWSONIC ELLIPTIC BACK E015-017 VX 1 10 days 52 P-BX-0601-0975 K5510000000001 GIFT BOX VX510 1 10 days 53 P-FM-0602-0878 K5550000000001 POLY FOAM L VX510 1 2 weeks 54 P-FM-0602-0879 K5550000000002 POLY FOAM R VX510 1 2 weeks 55 M-MS-0808-9489 K5551000000001 PE BAG W420*H550 VX510 1 10 days
56 TBD AAF155500025J0 PLASTIC HANDLE FOR SOTEC A0561 1 3 weeks 57 P-BX-0601-0976 K5510000000002 PLAIN GIFT BOX VX510 1 10 days
7. Recommended Spare Parts List
VX510 Recommended Spare Parts List
32
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 36
Item ViewSonic P/N Reference P/N Description Q'ty
1 #N/A K0015001000000 BASIC UNIT VX510 1 2 M-SCW-0824-0856 700473300-1000 SCREW TAPPING 3.0*10L P-HEAD P-TITE-ZN/B 6 3 #N/A K0015012000000 LCD PANEL ASSY VX510 1 4 B-CB-0206-0195 40-VF000T-B100 PWA BUTTON BOARD VF000 1 5 #N/A 36-020071-0000 TACT SW TC-0102X 160gf DIP 5 6 #N/A 37-018365-1300 LED 319YGW-C Y/G ROUND 2.9mm DIP 1 7 #N/A 39-316008-0600 CONN PLUG R/A 8P P:2mm 86808-0800 DIP 1 8 #N/A 41-VF000T-B000 PCB BUTTON BOARD VF000 Rev:B 1
9 C-FP-0301-0997 K0015028000000 BEZEL SUB-ASSY VX510 1 10 C-FP-0301-1036 K5110000000001 BEZEL (BLACK) VX510 1 11 M-CV-0830-2570 K5110000000003 COVER MIDDLE (SILVER ) VX510 1 12 PL-BT-0706-0175 K5110000000004 BUTTON (SILVER) VX510 1 13 M-MS-0808-9742 K5110000000010 LENS FOR POWER LED (CLEAR) VX510 1 14 #N/A 702374300-0800 SCREW TAPPING 3.0*8L B-HEAD B-TITE NI 8 15 #N/A K0015028000001 CHASSIS SUB-ASSY VX510 1 16 M-MS-0808-9479 32-000080-0000 CORE PL2508IG 25.5*15*4.5mm FOR VF000 2 17 M-BK-0805-0082 K5120000000003 CHASSIS FRAME VX510 1 18 M-MS-0808-9478 K5120000000010 SHIELDING VX510 1 19 M-SCW-0824-0857 703014250-2500 SCREW PH M2.5*0.45 L4(DIA=4.5 T=0.8) 6 20 M-SCW-0824-0858 702114300-0600 SCREW MACHINE M3*6L B HEAD NI 9 21 M-SCW-0824-0859 700114303-0800 SCREW M3*8L P-HEAD W/SP+FLATE WASHER NI 1 22 M-LCD-0826-0225 37-125150-4900 LCD TFT 15.0" XGA HSD150SX84-G HANNSTAR 1 23 #N/A 40-VF0009-A100 PWA VIDEO BOARD VF000 1 24 #N/A 10-002011-9700 IC RTD2011B FLAT LCD CONTROLLER QFP-208 1 25 #N/A 10-007865-9500 IC W78E65P-24/40 8BIT uCONTROLLER PLCC44 1 26 #N/A 12-107414-8300 IC 74LVC14AD SO-14 1 27 #N/A 14-63855L-7000 IC 24LC21AT/SN 1K(128*8) 2.5V SOP-8 1 28 #N/A 14-678553-7000 IC M24C16-WMN6T 16K(2K*8) 2.5V SOP-8 1 29 #N/A 18-001117-7700 IC LM1117MPX-3.3 REGULATOR SOT-223-3 2 30 #N/A 18-003904-9000 TR NPN MMBT3904 40V 200mA 225mW SOT-23 5 31 #N/A 18-008815-7700 IC AME8815BEGT250 1.5A REGULATOR SOT-223 1 32 #N/A 18-109435-9900 MOSFET P-CH CEM9435A 30V 5.3A SOP-8 1 33 #N/A 20-000042-8700 DIODE ZENER UDZS5.6B 5.6V 200mW SMD 6 34 #N/A 20-090099-8800 DIODE ARRAY BAV99 SWITCHING SOT-23 3 35 #N/A 20-100202-0200 DIODE SW TWIN DAN202U UMT 1.25*2.0 1 36 #N/A 30-000006-9500 RES CHIP 0ohm J 0603 7 37 #N/A 30-001016-9500 RES CHIP 100ohm J 0603 27 38 #N/A 30-001026-9500 RES CHIP 1Kohm J 0603 3 39 #N/A 30-001036-9500 RES CHIP 10Kohm J 0603 3 40 #N/A 30-001056-9500 RES CHIP 1Mohm J 0603 1 41 #N/A 30-002016-9500 RES CHIP 200ohm J 0603 1 42 #N/A 30-002226-9500 RES CHIP 2.2Kohm J 0603 2 43 #N/A 30-004726-9500 RES CHIP 4.7Kohm J 0603 18 44 #N/A 30-006816-9000 RES CHIP 680ohm J 0805 2 45 #N/A 30-008226-9500 RES CHIP 8.2Kohm J 0603 1 46 #N/A 30-175016-9500 RES 75 +-5% 1/16W 0603 3 47 #N/A 30-202026-9500 RES CHIP 1/16W 2Kohm 5% 0603 2 48 #N/A 30-202206-9500 RES CHIP 1/16W 22ohm 5% 0603 16 49 #N/A 30-202216-9500 RES CHIP 1/16W 220ohm 5% 0603 200ppm 3 50 #N/A 30-362204-8700 RES ARRAY CHIP 22ohm*4 J 1206 9 51 #N/A 31-103306-9500 CAP CERA CHIP 50V 33pF 5% X7R 0603 2 52 #N/A 31-132268-1200 CAP ELEC 16V 22uF M S5016M0022S5D DIP 4 53 #N/A 31-164737-9500 CAP CERA CHIP 16V 47nF K X7R 0603 3 54 #N/A 31-201049-9500 CAP CERA CHIP 50V 100nF Z Y5V 0603 43 55 #N/A 31-231068-1200 CAP ELEC CHIP 16V 10uF M 16CV10BS 1 56 #N/A 31-301003-9500 CAP CERA CHIP 50V 10pF D NPO 0603 TDK 5 57 #N/A 31-302006-9500 CAP CERA CHIP 50V 20pF 5% NPO 0603 1 58 #N/A 31-302206-9500 CAP CERA CHIP C0G 50V 220J 0603(22PF) 16 59 #N/A 31-364704-8300 CAP ARRAY CHIP 47pF*4 J NPO 1206 9 60 #N/A 31-481059-9500 CAP CERA CHIP 10V 1uF +80%/-20% Y5V 0603 3 61 #N/A 31-942278-1300 CAP ELEC 25V 220uF 20% 105'C 8*11mm L.I 1 62 #N/A 31-A31078-1200 CAP ELEC 16V 100uF M 6*5mm DIP W/CUT 3 63 #N/A 32-700603-1900 BEAD CHIP 19ohm 0.5A SBK160808T-190Y-S 3 64 #N/A 32-731206-6000 BEAD CHIP 60ohm 0.5A SBY321611T-600Y-S 7 65 #N/A 35-240002-4000 X'TAL 24MHz 20pF 20ppm 49S 6B24000377 1 66 #N/A 35-245762-4010 X'TAL 24.576MHz 6B24500292 W/CUT 3.4mm 1
VX510-1 BOM
VX510 BOM
33
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 37
Item ViewSonic P/N Reference P/N Description Q'ty
67 #N/A 38-020044-0300 SOCKET PLCC 44PIN SMD CS224410000 1 68 #N/A 38-418015-3J00 CONN D-SUB 15P R/A H/D A02003-11 DIP 1 69 #N/A 38-527040-0700 CONN FPC R/A 40P P:0.5mm BOT 88532-4003 2 70 #N/A 39-316008-0600 CONN PLUG R/A 8P P:2mm 86808-0800 DIP 2 71 #N/A 41-VF0009-A000 PCB VIDEO BOARD VF000 1 72 B-PS-0204-0072 83-110119-0000 AC POWER SUPPLY&DC-AC INVERTER W/VF000 1 73 M-FC-0809-0816 K5052000000000 CABLE ASSY FFC (40*56) VX510 2 74 M-FC-0809-0817 21-5H0001-0000 CABLE ASSY HARNESS 8P*8P 140mm W/VF000 1 75 M-SCW-0824-0860 702472300-0800 TAPPING SCREW 3.0*8L B HEAD P TITE Zn YL 8 76 #N/A K0015013000000 REAR COVER ASSY VX510 1 77 M-SCW-0824-0861 700374400-1200 SCREW TAPPING 4.0*12L P-HEAD B-TITE N 2 78 M-MS-0808-9481 K5110000000014 RUBBER WALL MOUNT PLUG(BLACK) VX510 4 79 M-MS-0808-9482 K5120000000004 PLATE HINGE VX510 1 80 M-MS-0808-9483 K5120000000006 PLATE WALL MOUNT VX510 4 81 M-WR-0828-0757 21-5W0000-0000 WIRE 1015 #18 AWG 100mm DA7835 GR/YEL 1 82 C-BC-0302-0600 K0015028000002 COVER BACK SUB-ASSY VX510 1 83 C-BC-0302-0618 K5110000000002 COVER BACK (BLACK) VX510 1 84 M-MS-0808-9743 K5120000000005 PLATE K LOCK VX510 1 85 #N/A K0015013000001 STAND ASSY VX510 1 86 M-SCW-0824-0862 700114401-0800 SCREW MACHINE M4*8L P-HEAD W/SP WASHER 4 87 M-CV-0830-0324 K5110000000005 BASE-TOP (SILVER) VX510 1 88 M-CV-0830-0325 K5110000000006 BASE BOTTOM (BLACK) VX510 1 89 M-CV-0830-0326 K5110000000009 COVER FRONT BASE(BLACK) VX510 1 90 M-MS-0808-9484 K5110000000011 CLAMP FOR AC D-SUB CABLE(PIN GOOD)CKK 05 2 91 M-MS-0808-9485 K5110000000013 RUBBER FOOT(GRAY)VX510 6 92 M-BK-0805-0083 K5120000000001 BRACKET L VX510 1 93 M-BK-0805-0084 K5120000000002 BRACKET R VX510 1 94 M-MS-0808-9486 K5120000000007 PLATE WEIGHT L(172.13) VX510 1 95 #N/A K5120000000008 PLATE WEIGHT M(107.83) VX510 2 96 M-MS-0808-9487 K5120000000009 PLATE WEIGHT S(78.3) VX510 2 97 M-MS-0808-9488 K5120000000011 HINGE VX510 1 98 M-SCW-0824-0862 700114401-0800 SCREW MACHINE M4*8L P-HEAD W/SP WASHER 4 99 M-CV-0830-0327 K5110000000007 COVER FOR AC D-SUB (BLACK) VX510 1
100 M-CV-0830-0328 K5110000000008 COVER FOR BASE CABLE (BLACK) VX510 1 101 #N/A K0015014000001 PACKING KIT VSCN (G) VX510 1 102 A-VC-0101-0378 21-5D0000-0000 CABLE ASSY D-SUB 15P H/D 9C W/CORE 1 103 #N/A 21-900214-0000 AC POWER CORD CHINA 3C CCC BLACK W/VF000 1 104 M-MS-0808-9496 K0015020000000 VIEWSONIC QSG W/CD W/PE BAG VX510 1 105 #N/A K0015020000001 WARRANTY CARD W/STICKER,BAG VSCN(G) CN 1 106 M-LB-0813-1005 K5310000000001 SMALL LABEL 40*25 VX510 1 107 M-LB-0813-1006 K5310000000002 ID LABEL 108*48.9 VX510 1 108 M-LB-0813-1007 K5310000000003 UPC LABEL 76.2*76.2 VX510 1 109 M-LB-0813-1008 K5310000000004 HI-POT PASS LABEL VX510 1 110 #N/A K5310000000006 QC-PASS LABEL VX510 1 111 #N/A K5310000000007 CARTON STICKET LABEL VX510 1 112 M-LB-0813-1009 K5320000000001 NAME PLATE VIEWSONIC FRONT(E015-016-1)VX 1 113 M-LB-0813-1010 K5320000000002 LOGO BIRD FRONT(E015 004)AL7.9H VX510 1 114 M-LB-0813-1011 K5320000000003 LOGO VIEWSONIC ELLIPTIC BACK E015-017 VX 1 115 P-BX-0601-0975 K5510000000001 GIFT BOX VX510 1 116 P-FM-0602-0878 K5550000000001 POLY FOAM L VX510 1 117 P-FM-0602-0879 K5550000000002 POLY FOAM R VX510 1 118 M-MS-0808-9489 K5551000000001 PE BAG W420*H550 VX510 1 119 #N/A K5551000000002 PE BAG OF CARTON VX510 1 120 M-MS-0808-9558 AAF155500025J0 PLASTIC HANDLE FOR SOTEC A0561 1 121 #N/A AA905310000810 LABEL SECURITY FOR BOE A0062 1
VX510-1 BOM
34
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 38
8. Exploded Diagram And Spare Parts List
35
View
So
nic
C
orpor
a
t
i
on
C
o
nfidenti
al
-
Do
No
t
C
opy
VX510
Page 39
Item ViewSonic P/N Reference P/N Description Q'ty
1 C-FP-0301-1036 K5110000000001 BEZEL (BLACK) VX510 1 2 M-CV-0830-2570 K5110000000003 COVER MIDDLE (SILVER ) VX510 1 3 PL-BT-0706-0175 K5110000000004 BUTTON (SILVER) VX510 1 4 M-MS-0808-9742 K5110000000010 LENS FOR POWER LED (CLEAR) VX510 1 5 M-BK-0805-0082 K5120000000003 CHASSIS FRAME VX510 1 6 M-MS-0808-9478 K5120000000010 SHIELDING VX510 1 7 M-MS-0808-9481 K5110000000014 RUBBER WALL MOUNT PLUG(BLACK) VX510 4 8 M-MS-0808-9482 K5120000000004 PLATE HINGE VX510 1
9 M-MS-0808-9483 K5120000000006 PLATE WALL MOUNT VX510 4 10 C-BC-0302-0618 K5110000000002 COVER BACK (BLACK) VX510 1 11 M-MS-0808-9743 K5120000000005 PLATE K LOCK VX510 1 12 M-CV-0830-0324 K5110000000005 BASE-TOP (SILVER) VX510 1 13 M-CV-0830-0325 K5110000000006 BASE BOTTOM (BLACK) VX510 1 14 M-CV-0830-0326 K5110000000009 COVER FRONT BASE(BLACK) VX510 1 15 M-MS-0808-9484 K5110000000011 CLAMP FOR AC D-SUB CABLE(PIN GOOD)CKK 05 2 16 M-MS-0808-9485 K5110000000013 RUBBER FOOT(GRAY)VX510 6 17 M-BK-0805-0083 K5120000000001 BRACKET L VX510 1 18 M-BK-0805-0084 K5120000000002 BRACKET R VX510 1 19 M-MS-0808-9486 K5120000000007 PLATE WEIGHT L(172.13) VX510 1 20 M-MS-0808-9487 K5120000000009 PLATE WEIGHT S(78.3) VX510 2 21 M-MS-0808-9488 K5120000000011 HINGE VX510 1 22 M-CV-0830-0327 K5110000000007 COVER FOR AC D-SUB (BLACK) VX510 1 23 M-CV-0830-0328 K5110000000008 COVER FOR BASE CABLE (BLACK) VX510 1 24 M-LB-0813-1009 K5320000000001 NAME PLATE VIEWSONIC FRONT(E015-016-1)VX 1 25 M-LB-0813-1010 K5320000000002 LOGO BIRD FRONT(E015 004)AL7.9H VX510 1 26 M-LB-0813-1011 K5320000000003 LOGO VIEWSONIC ELLIPTIC BACK E015-017 VX 1 27 B-CB-0206-0195 40-VF000T-B100 PWA BUTTON BOARD VF000 1 28 B-VB-0202-0361 40-VF0009-B200 PWA VIDEO BOARD VF000 1 29 B-PS-0204-0072 83-110119-0000 AC POWER SUPPLY&DC-AC INVERTER W/VF000 1 30 M-LCD-0826-0225 37-125150-4900 LCD TFT15.0'' XGA HSD150SX84-G HANNSTAR 1
VX510-1 Exploded Part List
36
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 40
Item ViewSonic P/N Reference P/N Description Q'ty
1 P-FM-0602-0878 K5550000000001 GIFT BOX VX510 1
2 M-MS-0808-9489 K5551000000003 POLY FOAM R 01 VX510 1
3 A-VC-0101-0378 21-5D0000-0000 CABLE ASSY D-SUB 15P H/D 9C W/CORE 1
4 M-MS-0808-9489 K5551000000003 PE BAG W420*H650 VX510 1
5 A-PC-0106-0336 21-900214-0000 AC POWER CORD CHINA 3C CCCBLACK W/VF000 1
6 P-FM-0602-0879 K5550000000004 POLY FOAM L 01 VX510 1
VX510-1 Packing Part List
Packing for shipping
37
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 41
VSIN
DBRED/GRN/BLU[2..7]
TCON9--STV2
8051MCU
OCLK
RTD_RESET
VGA INPUT
DOWN_KEY
TMDS_3AVCC
RTD2011B
DDC_SCL
U8
U5
DARED/GRN/BLU[2..7]
ECLK
RTD_SDO/SDI
R
PANEL_3VCC
POWER_KEY
RTD_3DVCC
TCON8--STV1
5DVCC
G
TCON7--POL
SELECT_KEY
IICSDA
B
ACTIVE_LED
U7
TCON4--OE
TCON3--LOAD
5DVCC
UDDC1
ADC_3AVCC
U4
TCON1--STH
UP_KEY
BOTTOM BOARD
PANEL INTERFACE
IICSCL
RTD_3DVCC
TCON10--CPV
PLL_3PVCC
DC TO DC
5DVCC
HSIN
RTD_2.5DVCC
CONNECT
TCON0--REV
POWER&INVERTER BOARD
VRMT
DDC_SDA
MENU_KEY
74LVC14
24C16
VBRI
STANDBY_LED
24C21
RTD_SCLK
RTD_SCSB
VGA5V
PCB
41-VF0009-C000
PWA
40-VF0009-C
9. Block Diagram
38
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 42
ADC_3AVCC
PLL_3PVCC
TMDS_3AVCC
RTD_3DVCC
RTD_2.5DVCC
PANEL_3VCC is used by RSDS
PANEL_3VCC is used by X87
40-VF0009-C000
C
LCD MONITOR
A3
14
Monday, May 10, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
BKLT-EN
BKLT-PWM
BKLT-EN BKLT-PWM
BGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
VRMT 2
VBRI 3
3DVCC 3
3AVCC2 3
DGND 2,3,4
5DVCC 2,3,4
3PVCC 3
3AVCC1 3
2.5DVCC 3
PANEL_3VCC 4
PANEL_PW32
5DVCC2,3,4
5DVCC
5DVCC
C5
0.1UF_Y5V
12
C8
0.1UF_Y5V
12
R1
4.7K
1
2
R4 4.7K
1 2
C9 100UF/EC16V6.3H5.2
12
R10 22
1 2
R93 1K
1 2
U3
LM1117MPX-3.3
2
3 1
4
OUT_1
IN ADJ/GND
OUT_2
Q3
MMBT3904
2
3
1
B
C 'E
U1
AME8815BEGT250
23
1
4
VOUT_1VIN
GND
VOUT_2
C6
0.1UF_Y5V
12
Q1
MMBT3904
2
3
1
B
C 'E
C12
0.1UF_Y5V
12
L2
FEB_1206
Q2
MMBT3904
2
3
1
B
C 'E
L3
FEB_1206
JP1
HEADER 8/SM
8
7
6
5
4
3
2
1
C86
0.1UF_Y5V
12
C83 10UF/16V
NA
12
C15 1UF_Y5V
12
R3 200
1 2
U2
LM1117MPX-3.3
2
3 1
4
OUT_1
IN ADJ/GND
OUT_2
C4 100UF/EC16V6.3H5.2
12
C3 220UF/25V
12
UPMOS1
CEM9435
3
4
8
2
5
6
7
1
.GD S
D,
..D.,
C85
100UF/EC16V6.3H5.2
12
R5 220
1 2
C7 1UF_Y5V
12
R6
2.2K
1
2
R2 1K
1
2
R9 2.2K
1 2
10. Schematic Diagrams
39
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 43
Near to Chip
40-VF0009-C000
C
LCD MONITOR
A3
24
Monday, May 10, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
MENU_KEY
5DVCC
DGND
DGND
DGND
5DVCC
DGND
DGND
DGND
DGND1,3,4
IICSDA
5DVCC1,3,4
IICSCL
DGND 1,3,4
MENU_KEY4
CONNECT 3
STANDBY_LED 4 ACTIVE_LED 4
POWER_KEY4
SELECT_KEY4
DOWN_KEY4
UP_KEY4
PANEL_PW31
VRMT1
DDC_SCL3
DDC_SDA3
RTD_SDO/SDI3
RTD_SCSB3
RTD_SCLK3
IICSCL IICSDA
5DVCC1,3,4
5DVCC1,3,4
RTD_RESET3
R24
8.2K
1
2
U9 G690H_Reset_IC
NA
3
1
2
VIN
GND
VOUT
R16
4.7K
1
2
U5
8051 Socket
2 3 4 5 6 7 8 9
10
11
202122
444342414039383736
35
32
33
24
25
26
27
28
29
30
31
13
14 15 16 17 18 19
12
P1.0 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7
RST
P3.0
XTAL2
XTAL1
VSS
VCC
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
EA_/VPP
PSEN_
ALE/PROG_
P2.0
P2.1
P2.2
P2.3
P2.4
P2.5
P2.6
P2.7
P3.1
P3.2 P3.3 P3.4 P3.5 P3.6 P3.7
P4.3
R34
22
1
2
R35
22
1
2
R11 0
12
R14 0
NA
12
R36 0
12
R95 100
1 2
R96 100
1 2
R17
4.7K
1
2
C20
0.1UF_Y5V
12
R18
4.7K
1
2
C88
22PF
1
2
C19
0.1UF_Y5V
12
R19
4.7K
1
2
R32 22
1 2
Y1
24.000MHz
1 2
R20
4.7K
1
2
U4
X24C16
8 5 6 4
7 3 2 1
5DVCC SDA SCL GND
TEST
A2 A1 A0
R25
4.7K
1
2
R21
4.7K
1
2
R22
4.7K
1
2
R99 0
NA
12
R31 100
1 2
R33 100
1 2
R12 100
1 2
R23
4.7K
1
2
R13 100
1 2
R98
0
1 2
R26 100
1 2
C22 10PF
1
2
C23 10PF
1
2
R97
4.7K
NA
1
2
R37 1M
1 2
R27 100
1 2
R28 100
1 2
R29 100
1 2
+
C21
10uF_16V
40
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 44
1
Near to Chip
Near to Chip
Near to Chip
19 ohm
19 ohm
19 ohm 0 ohm
0 ohm
0 ohm
Near to Chip
Near to Chip
40-VF0009-C000
C
LCD MONITOR
A2
34
Monday, May 10, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
VGAVS
B+
RIN
R+
GIN
G+
VGAHS
VGAVS
VGAHS
VGAVS
RIN
GIN
BIN
DDC_SCL DDC_SDA
CONNECTHSIN
HSIN
VSIN
VSIN
ADC_GND
BIN
ADC_GND
ADC_GND
ADC_GND
DGND
RTD_SCLK
PLL_GND
AHS
DGND
R+
ADC_GND
DGND
AHS
ADC_GND
DGND
G+
ADC_GND
DGND
B+
RTD_SCSB
DGND
SOG
RTD_SDO/SDI
AVS
ADC_GND
ADC_GND
DGND
PLL_GND
SOG
DGND
PLL_TEST2
AVS
DDC_SDA2
DDC_SCL2
VGA5V
DGND 1,2,4
CONNECT 2
3DVCC1 2.5DVCC 1
VBRI 1
RTD_SCLK2 RTD_SCSB2
RTD_SDO/SDI2
DDC_SDA2
DDC_SCL2
5DVCC1,2,4
DBGRN6 4
DBGRN7 4
DBBLU2 4
DBBLU3 4
DGND 1,2,4
OCLK4
ECLK4
TCON04
TCON74
TCON44 TCON94
TCON84 TCON104
TCON14
3DVCC
RTD_RESET2
VGA5V
DDC_SDA2
DDC_SCL2
3AVCC1 1
TCON34
3PVCC1
3AVCC21
DBBLU7 4 DBBLU5 4
DBBLU6 4 DBBLU4 4
DBRED5 4
DBGRN2 4
DBRED6 4
DBRED7 4
DBGRN4 4 DBGRN3 4
DBRED4 4
DBGRN5 4
DARED5 4
DABLU2 4
DABLU4 4
DAGRN4 4
DAGRN6 4
DAGRN2 4
DABLU5 4
DARED6 4
DAGRN5 4
DARED7 4
DABLU3 4
DAGRN3 4
DAGRN7 4
DBRED3 4
DABLU6 4
DARED2 4
DABLU7 4
DARED3 4
DBRED2 4
DARED4 4
R2.5DVCCR3DVCC
3AVCC1
5DVCC
ADC_AVCC ADC_AVCCADC_AVCC
ADC_AVCC
PLL_AVCC
R63 100
1 2
L7
FEB_0603/0R
L6
FEB_0603
C26
0.1UF_Y5V
12
C28
0.1UF_Y5V
12
R40 2K
1
2
R64 22NA
1 2
C66
0.1UF_Y5V
12
RP9 22X4
1
2
3456 7 8
C39 22PF
1
2
C49 10PF
1
2
D9
DAN202U
3
12
C73
0.1UF_Y5V
1 2
R66 22
NA
1 2
C31
0.1UF_Y5V
12
RP1 22X4
1
2
3456 7 8
C62
0.1UF_Y5V
12
C53 10PF
1
2
C33
0.1UF_Y5V
12
C40 20PF
12
U8B
74LVC14
3 4
14
7
R70 22
1 2
CP2
47PFX4_5%
234
876
5
1
CP5
47PFX4_5%
234
876
5
1
CP7
47PFX4_5%
234
876
5
1
R71
22
1 2
R60 22
1 2
C36
0.1UF_Y5V
12
D10
5.6V_RLZ5.6B
12
D5
5.6V_RLZ5.6B
12
Y2
24.576MHz
1 2
RP2 22X4
1
2
3456 7 8
R48
1M
NA
1
2
C69 22PF
1
2
C64
0.1UF_Y5V
12
L12 FEB_1206
C77 33PF
1
2
C57
0.1UF_Y5V
12
R43
75
1
2
L4 FEB_1206
+
C24 22uF_16V
L13 FEB_1206
U8D
74LVC14
9 8
14
7
RTD2011B
585954
55
112
111
110
62
104 105
116
21 22 30 31 56 57 66
67
122 121
98 96
97
100
99
102
101
95
93
103
1
128
126
125
119
120
123 118
124 127
35 36
33 34
108
107
92742
60
41832
39
90
2052113
89
1953114
117
115
87
86
61
88
72
75
74
73
85 76 77 84
78 79 80 81
70 82 83 69
71
63
64
68
49
50
2 3 5 6 7 8
10 11
12 13 14 15 16 17
23 24 25 26 28 29
473845464443404137
94
92
48
106516591109
DARED7/AR3P
DARED6/AR3N
DAGRN3/AG1P
DAGRN2/AG1N
SDIO
SCLK
SCSB
DARED4/AR2N
AHS AVS
TCON0/V0 TCON1/V1 TCON2/V2 TCON3/V3 TCON4/V4 TCON8/V5 TCON9/V6 TCON10/V7
TCON11/VCLK
APLL1_VDD APLL1_GND
ADCB_VDD ADCB_GND
B
SOG G
R
ADCR_GND ADC_GNDOFF
ADC_REFIO
ADCR_VDD
DPLL_GND
DPLL_VDD
PLL_TEST1 / IRQ
PLL_TEST2
XO
XI
APLL2_VDD APLL2_GND
APLL3_VDD APLL3_GND
DCLK/TCON_ECLK DEN/TCON7
DHS/TCON5/PWM2 DVS/TCON_OCLK
DDCSDA
DDCSCL
GNDIO
GNDIO
GNDIO
GNDIO
VCCIO
VCCIO
VCCIO
VCCIO
GNDIO
GNDK
GNDK
GNDK
DDC2SDA
VCCK
VCCK
VCCK
RESETB
REFCLK/PWM0
GNDK
VCCK
DARED5/AR2P
DDC2SCL
TMDS_VDD2
TMDS_GND2
R2N
R2P
T_DPLL_VDD
R1P R1N
T_DPLL_GND TMDS_VDD0
R0P R0N
TMDS_GND0 TMDS_VDD3
RXCP
RXCN
TMDS_GND3
REXT
DARED3/AR1P
DARED2/AR1N
TMDS_TST/PWM1
DAGRN5/AG2P
DAGRN4/AG2N
DBBLU7/BB3P DBBLU6/BB3N DBBLU5/BB2P DBBLU4/BB2N DBBLU3/BB1P DBBLU2/BB1N
BCLKP BCLKN
DBGRN7/BG3P DBGRN6/BG3N DBGRN5/BG2P DBGRN4/BG2N DBGRN3/BG1P DBGRN2/BG1N
DBRED7/BR3P
DBRED6/BR3N
DBRED5/BR2P
DBRED4/BR2N
DBRED3/BR1P
DBRED2/BR1N
DAGRN7/AG3P
DABLU6/AB3N
ACLKP
ACLKN
DABLU2/AB1N
DABLU3/AB1P
DABLU5/AB2P
DABLU4/AB2N
DABLU7/AB3P
ADC_VDD
ADC_GND
DAGRN6/AG3N
GNDIO
VCCIO
VCCIO
VCCIO
VCCIO
C42 10PF
1
2
UDDC1
24LC21MB
1 2 3 45
6
7
8
NC NC NC
GNDSDA
SCL
VSYNC
VCC
RP3 22X4
1
2
3456 7 8
L9
FEB_0603/0R
L8
FEB_0603
U8A
74LVC14
1 2
14
7
R
G
B
TxD
DGND
RAGND
GAGND
BAGND
VGA5V
DGND
RxD
DDCSDA
DDCSCL
HSIN
VSIN
U6
VGA_CON15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
L11
FEB_0603/0R
D6
5.6V_RLZ5.6B
12
D7
5.6V_RLZ5.6B
12
R42
100
1 2
L5 FEB_1206
+
C25 22uF_16V
CP8
47PFX4_5%
234
876
5
1
C27
0.1UF_Y5V
12
R73 10K
1
2
RP4 22X4
1
2
3456 7 8
R44
100
1 2
R54 22
1 2
R55 22
1 2
L14 FEB_1206
R74 100
1 2
C29
0.1UF_Y5V
12
C74
0.1UF_Y5V
1 2
R75 100
1 2
+
C61 22uF_16V
R47
100
1 2
C48 0.047UF_X7R
1 2
C58
0.1UF_Y5V
12
R72 10K
1
2
C60
0.1UF_Y5V
12
C46
0.1UF_Y5V
12
L10
FEB_0603
C52 0.047UF_X7R
1 2
C97 22PF
1
2
C44
0.1UF_Y5V
12
C98 22PF
1
2
CP3
47PFX4_5%
234
876
5
1
D4
5.6V_RLZ5.6B
12
C34
0.1UF_Y5V
12
RP5 22X4
1
2
3456 7 8
R67 100
1 2
R69 100
1 2
D2
BAV99
1
2
3
R51 0
1 2
C65
0.1UF_Y5V
12
R52 10K
1 2
R59 22
1 2
C56
0.1UF_Y5V
1 2
R53
1M
NA
1
2
C84
0.1UF_Y5V
1 2
R58 22
1 2
R45
75
1
2
C76 33PF
1
2
+
C55 22uF_16V
R46 1K
1 2
C32
0.1UF_Y5V
12
U8C
74LVC14
5 6
14
7
RP6 22X4
1
2
3456 7 8
R57 22
1 2
CP1
47PFX4_5%
234
876
5
1
R41 2K
1
2
R49
75
1
2
CP6
47PFX4_5%
234
876
5
1
R94 22
1 2
C37
0.1UF_Y5V
12
C41 0.047UF_X7R
1 2
R62 22
1 2
C71 22PF
1
2
RP7 22X4
1
2
3456 7 8
D1
BAV99
1
2
3
CP9
47PFX4_5%
234
876
5
1
R65
4.7K
1
2
R68
4.7K
1
2
R38 100
1 2
R39 100
1 2
D8
5.6V_RLZ5.6B
12
C63
0.1UF_Y5V
12
R50 1K
1 2
C30
0.1UF_Y5V
12
C47
0.1UF_Y5V
12
C59
0.1UF_Y5V
12
D3
BAV99
1
2
3
RP8 22X4
1
2
3456 7 8
C68 22PF
1 2
C75
0.1UF_Y5V
1 2
C87 1UF_Y5V
12
C45
0.1UF_Y5V
12
C67 22PF
1 2
R56 22
1 2
R61 22
1 2
C38
0.1UF_Y5V
12
CP4
47PFX4_5%
234
876
5
1
C51
0.047UF_X7R
1 2
C35
0.1UF_Y5V
12
41
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 45
0211 ADD R100,R101
40-VF0009-C000
C
LCD MONITOR
A3
44
Monday, May 10, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
DGND
DOWN_KEY
MENU_KEY
SELECT_KEY
DGND
POWER_KEY_
UP_KEY
POL
OE
LOAD
STV2
DGND
CPV
STV1
REV
STH
DGND
MENU_KEY 2
5DVCC1,2,3
POWER_KEY 2
DOWN_KEY 2 SELECT_KEY 2
UP_KEY 2
ACTIVE_LED 2
STANDBY_LED 2
DAGRN63 DAGRN43
DAGRN33 DAGRN23
TCON43
TCON73
DABLU33
DAGRN53
DAGRN73
DARED23
DARED33
DARED43
DARED53
DARED73
DABLU53
DABLU23
DABLU73 DABLU63
TCON93
TCON103
TCON13
TCON03
TCON33
ECLK3
DARED63
DABLU43
TCON83
DBGRN43
DBGRN53 DBGRN33
DBGRN63
DBGRN23
DBRED23
DBBLU63
DBRED33
DBBLU53
DBRED43
DBBLU43 DBBLU33 DBBLU23
PANEL_3VCC1
OCLK3
DBRED73 DBRED63 DBRED53
DBBLU73
DBGRN73
DGND1,2,3
5DVCC 1,2,3
5DVCC 1,2,3
C96
22PF
1
2
C93
22PF
1
2
C94
22PF
1
2
C95
22PF
1
2
R82 100
1 2
R91
680_0805
1
2
JP2
HEADER 8/SM
8 7 6 5 4 3 2 1
R83 100
1 2
R84 100
1 2
C78
0.1UF_Y5V
12
R85 100
1 2
R86 100
1 2
R87 100
1 2
R88 100
1 2
CN12J2
CON40
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CN12J1
CON40
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
C92
22PF
1
2
C79
0.1UF_Y5V
12
R90 220
1 2
R92 220
1 2
C80
0.1UF_Y5V
12
R76 0
1 2
C81
0.1UF_Y5V
12
C89
22PF
1
2
R100
4.7K
1
2
R101
4.7K
1
2
Q7
MMBT3904
2
3
1
B
C 'E
C82
0.1UF_Y5V
12
R81
4.7K
1
2
R80
4.7K
1
2
R79
4.7K
1
2
R78
4.7K
1
2
R77
4.7K
1
2
C90
22PF
1
2
C91
22PF
1
2
Q8
MMBT3904
2
3
1
B
C 'E
R89 680_0805
1
2
42
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 46
(2A)
(14.5A)
(0.7A)
83-110119-0000
A
LCD MONITOR
B
12Wednesday, May 12, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
+5V
14V
+12V
C019 470uF/25V
C013 470uF/25V
IC004
NC
1
2
3
VIN
GND
VOUT
L001
R020 NC 0805
C126 NC
VAR1 471
L PIN
N
PIN
L002
C011 NC
IC001 1203
6
8
1
2
4
5 7
3
6
8
1
2
4
57
3
R022 NC
C007
0.1uF
R035
NC
R044 27K
R012 47R
R047 27K
D003
1N4148
C023 NC
R013
47R
NTC1 SCK054
R014 51R
F001
3.15A/250V
C012 470uF/10V
D006
MBR10100
IC003 TL431
2 3
1
R015 2K
Q001 2SK2645
C018
NC
R002 510K
R001 510K
R032 820R
R003 510K
R016
1K
C008
0.1uF
C016
0.1uF
R043 820R
CX001
0.47uF
R023 NC
NF001
43
21
C003 NC
R033 91K
ZD003
6.2B
R031 15K
C017
0.1uF
R017
0.56 2W
R041
1K
BD001 KBP206G
IC002B PC817
3
4
NF002
43
21
C014 1000u10V
R019 NC 0805
R021 NC 0805
C001
68U/450V
C027 1000u/10V
SCR001
HXL1225
C002
222K/1KV
R040 10K
T002
2
10
83
6
5
1 12
7
11
R009
120K
D004 PS1010R
D007
MBR10100
R011
47R
C028
0.1uF
R010
47R
C010 471P
CY003
222/Y1
C009
471P/500V
CY002 222/Y2
R045
10
C006 10uF/25V
D001
1N4007
R018 0
R005 10K
R006
1K
ZD001
16B
C015 10u/25V
C005
0.47uF
Q002
3906
Q003
3904
R007
1K
IC002A PC817
12
D002
1N4148
CY001 222/Y2
R004
10K
R028 560
R027 180
R008
27K 1%
R039
JUMP
ZD002 NC
R034 2K
C004 103
43
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 47
4.3~7.9mA f=53K
HV(OPEN)=1650V
HV(LOAD)=730V
HV(LOAD)=90V
HV(OPEN)=1620V
HV(OPEN)=1690V
83-110119-0000
A
LCD MONITOR
B
22Wednesday, May 12, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
ON/OFF
Diming
+5V
+12V
+14.5V
Q108
KFD1624C
R142
2K 0805
R131
2.2K 1206
R148
2K 0805
Q107 KTD1624C
C113
0.22/16V
R111 270
C117
0.01U/16V
C108
0.22/16V
R115 270
R109 15K
Q105 A04405
1 2 3 4 5
6
7
8
S S S GD
D
D
D
R136
2.2K 1206
C107
0.1U/16V
C114
0.1u/16V
C118
0.1U/16V
R102
10K
L101
150uH
C123
22P/3KV
R138
2.2K 1206
Q101
DTC144WKA
C105 1U OPEN
R118
3.9K
R141
9.1K
C106
2.2U/16V
R114 NC
R107 NC
C125
22P/3KV
R119 NC
R112
51K
Q102
DTA144WKA
C115 1U OPEN
C112
0.1U/16V
C109
2.2u/50V
R104 5.6K
C110
0.001u/16V
D101 B140
C102 180u/25V
ZD102
9.1B
R106
5.1K
Q104 SST3906
R124 15K
Q103
SST3904
D105
BAV99
1 3
2
R153 100K
R152
100K
R151
100K
D106
BAV99
1 3
2
CON105 CN02
1 2
ZD104
9.1V
C116
0.1u/25V
R155 62K
R154
100K
Q114 3904
R150
0
R144
0
CON103 CN02
1 2
CON102 CN08
1 2 3 4 5 6 7 8
PT101 EE-19
6
1 2
4 3
5
7
10
R116 470
R133
2.2K 1206
R122
3.9K
R103
10K
C101 1UF
C104
0.1/25V
Q112 SST3906
R101 33K
IC101
FP5451A
1234567
8 9
10
11
12
13
14
15
16
CTRT1IN+
1IN-
1FBK
1DTC
1OUT
GND VCC
2OUT
2DTC
2FBK
2IN-
2IN+
SCP
REF
R137
2.2K 1206
R125 13K
C103
0.1U/16V
F101
0 1206
R143
2K 0805
C121
0.22/250V PMS
R105
5.1K
D102 B140
Q113 A04405
1 2 3 4 5
6
7
8
S S S GD
D
D
D
D103 BAV99
1 3
2
R113 15K
R120 470
PT102 EE-19
6
1 2
4 3
5
7
8
D104 BAV99
1 3
2
R123 NC
R140
2.7K
Q109 KTD1624C
2SD2150
R127 13K
Q111
SST3904
ZD103
9.1B
R126 15K
R135
2.2K 1206
C122
0.22/250V PMS
R139
39K
R145
39K
C119
0.01U/16V
R108 51K
R149
2K 0805
R147
9.1K
C120
0.1U/16V
C111
2.2U/16V
R146
2.7K
R110
NC
R134
2.2K 1206
L102
150uH
R132
2.2K 1206
44
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 48
DOWN(-)
AUTO
UP(+)
MENU
POWER
O
G
GR
TOP
Schematic Diagrams --Button Board
40-VF000T-C000
C
LCD MONITOR
A3
11
Monday, May 10, 2004
VX510
Title :
Size :
Document Number :
Rev :
Date:
Sheet :
of
Project Name :
ViewSonic Corporation
POWER_KEY_ MENU_KEY
AUTO_KEY DOWN_KEY
UP_KEY
LED_ORANGE LED_GRN
GND
CN1
HEADER 8/SM
8
7
6
5
4
3
2
1
S5
POW
D1 LED/3P
2 1
3
S4
AUTO
S3
SL+
S1
MENU
S2
SL-
45
ViewSonic Corporation
Confidential - Do Not Copy VX710
Page 49
Power Board PCB top view
46
ViewSonic Corporation Confidential
-
Do Not Copy VX510
11. PCB Layout Diagrams
Page 50
Power Board PCB bottom view
47
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 51
Button Board PCB top view
48
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Page 52
*Readers Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual,which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
B.Are you satisfied with the VX510 service manual?
C.Do you have any other opinion or suggestion about this service manual?
Readers basic data:
After completing this form, please return it to ViewSonic Quality Assurance
A.What do you think about the content after reading VX510 Service Manual?
metI tnellecxE dooG riaF daB
.1
.2
.3
tinU riaF daB
in the USA at facsimile
1-909-839-7943.
You may also e-mail any suggestions to the Director, Quality Systems & Processes
(marc.maupin@viewsonic.com)
dooGtnellecxE
Precautions And Safety Notices
1.
8. Exploded Diagram and Spare Parts List
7. Recommended Spare Parts List
Adjusting Procedure
2. Specification
5.
4. Circuit Description
3.
6. Trouble Shooting Flow Chart
Front Panel Function Control Description
9. Block Diagram
10. Schematic Diagrams
11. PCB Layout Diagrams
Service Manual Content Service Manual Layout The form and listing
Name: Title:
Company: Add.:
Tel: E-mail:
Fax:
49
ViewSonic Corporation Confidential
-
Do Not Copy VX510
Loading...