ViewSonic VPC191, VS13727 User Manual

®
VPC191
All-in-OnePC
- UserGuide
- Guidedel’utilisateur
- Guíadelusuario
- Guiadousuário
- Pyководствопользователя
- 使用手冊(简中)
ModelNo.:VS13727
ComplianceInformation
ForU.S.A.
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCCRadiationExposureStatement
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This wireless module device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ViewSonic VPC191
i
ImportantSafetyInstructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including ampliers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding­type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not t into your outlet, consult an electrician for replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the point where if emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the equipment. When a cart is used, use caution when moving the cart/equipment combination to avoid injury from tipping over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualied service personnel. Service is required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.
15. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
ViewSonic VPC191
ii
DeclarationofRoHSCompliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
Substance
Lead (Pb) 0,1% < 0,1%
Mercury (Hg) 0,1% < 0,1%
Cadmium (Cd) 0,01% < 0,01%
Hexavalent Chromium (Cr6+) 0,1% < 0,1%
Polybrominated biphenyls (PBB) 0,1% < 0,1%
Polybrominated diphenyl ethers (PBDE)
ProposedMaximumConcentration
0,1% < 0,1%
ActualConcentration
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not specically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic VPC191
iii
CopyrightInformation
Copyright © ViewSonic® Corporation, 2011. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation. AMD®, Athlon™, Athlon™ XP, Thoroughbred™ and Duron™ are registered trademarks of AMD® Corporation. NVIDIA®, the NVIDIA® logo, DualNet® and nForce® are registered trademarks or trademarks of NVIDIA® Corporation in the United States and/ or other countries. PS/2® and OS/2® are registered trademarks of International Business Machines Corporation. Netware® is a registered trademark of Novell, Inc. Award® is a registered trademark of Phoenix Technologies Ltd. AMI® is a registered trademark of American Megatrends Inc. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.
®
Corporation in the United States and other countries.
ProductRegistration
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic®.
ForYourRecords
ProductName:
ModelNumber: DocumentNumber: SerialNumber: PurchaseDate:
Productdisposalatendofproductlife
ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/ Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
ViewSonic VPC191
VPC191 ViewSonic All-in-One PC VS13727 VPC191-1_UG_ENG Rev. 1C 11-26-10
iv
Contents
Chapter 1 Recognize Computer
Front View.........................................................................................2
Left/Right/Look-down View...............................................................3
Back View.........................................................................................4
Chapter 2 Use Computer
Connect Computer............................................................................5
Adjust LCD .......................................................................................5
Use All-In-One PC.............................................................................5
Chapter 3 Install Operation System and Driver
Install the Operation System.............................................................6
Other settings of SCU.......................................................................6
Install the Driver program..................................................................9
[Attention] The product appearance, color match and picture in the manual is only for reference, please check with the real once there is any difference.
The company has the rights to renew the manual as well as the product.
ViewSonic VPC191
1
UserGuide
Dear Customer: Thanks for selecting our product! The product you purchased has strong information management function. Whenever you stay at home or ofce, it's your high efcient helper and will accompany you all the time. The below words will help you to understand how to use the product and also the skills.
Chapter1:RecognizeComputer
1.1FrontView
1 Power button Turn on/off computer
DCR/Screen brightness adjust
2
button
3 Screen brightness adjust button Enhance the brightness
4 Screen Auto-Adjust button Shows the renewed frequency, color auto-adjust
5 Mute button Turn on/turn off tone
6 LCD switch button LCD screen on-off button
7 IR (infrared) interface Receiving the infrared signal from remote controller
8 Camera Taking pictures or recording the video
DCR switch or reduce the brightness
[Attention] DCR function is only supported by models with integrated graphics
ViewSonic VPC191
2
1.2Left/Right/Look-downView
9 Supporting Frame Support the main LCD
10 Card Reader Support SD/MMC/MS/MS PRO Card
11 USB interface Connect to keyboard, mouse and printer, etc.
12 ODD Insert disc, stall program and play music, etc.
13 Internal Mic. Video meeting, dub and recording
[Attention] Your All-In-One PC may not have all the interface above according to the specic type, please check with the real.
ViewSonic VPC191
3
1.3BackView
14 TV Interface (optional) Play TV programme
15 S-VIDEO (optional)
16 VIDEO (optional)
17 Left Track(optional)
18 Right Track(optional)
19 Audio output interface Audio output, connect to earphone
20 Mic. Interface Connect to microphone outside
21 Audio Input Interface Input audio or simple recording
22 Power interface Insert power adapter and connect to electricity
23 RJ-45 interface Connect to Internet
24 Ventilation slor For system cooling
Connect to Video equipment such as , Set-top box, DVD etc.
Connect to Video equipment such as , Set-top box, DVD etc.
Connect to Audio equipment such as , Set-top box, DVD etc.
Connect to Audio equipment such as , Set-top box, DVD etc.
[Attention] Your All-In-One PC may not have all the interface above according to the specic type, please check with the real.
ViewSonic VPC191
4
Chapeter2:UseComputer
2.1ConnectComputer
· Connect your power adapter to the correct interface located at the back of
the computer.
· Connect your keyboard cable to the correct interface (USB interface)
· Connect your mouse cable to the correct interface (USB interface)
2.2AdjustLCD
· Adjust your LCD with look-down view to the proper angle ( -3 degree ~25
degree)
[Attention] Hold rmly when carry the computer, do not grasp the support frame directly.
2.3UseAll-In-OnePC
· Press the switch on/off button under the bottom of the main screen, power
on the computer and enter the operation system.
ViewSonic VPC191
5
Chapter3:InstallOperationSystemandDriver
3.1InstalltheOperationSystem
Before installing OS, you need set USB-CD/DVD to the boot device according to the following instructions. Open the computer, when display test, press [F2] key to enter the BIOS Setup screen.
When enter the BIOS Setup screen, use the [→] key or [←]key on the keyboard to choose Boot, select one device in the Boot priority order, and press the [ + ] or [ - ] button to set priorities; press the [ X ] in the exclude from boot order options to adjust the contained option to the Boot priority order.
ViewSonic VPC191
6
3.2OthersettingsofSCU
Main menu: Set system time and date, check the related information such as: BIOS, EC, MB version, System Memory, and the extended Memory, etc.
Sata Port: Sata port connect sata device information.
The specic operation can be found in the System promoted screens.
ViewSonic VPC191
7
Advanced menu: Conduct the following superior settings.
Legacy USB: under the DOS system, set if the USB device can be
used.
Summary screen: set whether it need to display the system
conguration during boot-time.
Boot-time Diagnostic Screen: in the POST process to set the image
display mode or the text isplay mode.
PXE OPROM : network card start switch.
Sata Controller Mode Option : set the HDD working mode.
If install the Windows XP, need disabled AHCI.
AHCI Enable: it is effective when HDD working mode is set as
Enable;The Enabled/Disabled is optional.
ViewSonic VPC191
8
Security menu: the security setting to enter the system.
Supervisor password is: to display whether has settings when entering
the Setup utility; if has setting, it will display Set, if doesn't have setting, it display Clear.
User password is: to display whether has settings when entering the
Setup utility; if has setting, it will display Set, if doesn't have setting, it display Clear.
Set User Password: set the password to enter Setup utility.
Set supervisor Password: set the password to enter Setup utility,
authority higher than User password.
Password on boot: the need to set startup password.
Set Harddisk Password: set the password to enter HDD.
[Warning]: Please remember the password you set, otherwise it will cause inconvenience for you.
ViewSonic VPC191
9
Exit menu: exit the BIOS Setup after completed the relevant setup.
Exit Saving Changes:store the value and exit.
Exit Discarding Changes: without storing the value and exit.
Load Setup Defaults:restore the factory value.
Discard Changes: discard this setting, and return to the last setting.
Save Changes:save the setting.
3.3InstalltheDriverprogram
Please use the CD attached with the machine to operate in accordance with the CD operation interface. Option 1: Computer-specic driver. Option 2: Application Software.
Choose the driver program you need and operate according to the screen instruction. System will install the driver program automatically; during the process, the system may restart.
ViewSonic VPC191
10
CustomerSupport
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
Country/Region Website
Australia/New Zealand www.viewsonic.com.au
Canada www.viewsonic.com
Europe
Hong Kong www.hk.viewsonic.com T= 852 3102 2900 service@hk.viewsonic.com
India www.in.viewsonic.com T= 1800 11 9999 service@in.viewsonic.com
Ireland (Eire)
Korea www.kr.viewsonic.com T= 080 333 2131 service@kr.viewsonic.com
Latin America (Argentina)
Latin America (Chile) www.viewsonic.com/la/ T= 1230-020-7975 soporte@viewsonic.com
Latin America (Columbia)
Latin America (Mexico) www.viewsonic.com/la/ T= 001-8882328722 soporte@viewsonic.com
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico
Latin America (Peru) www.viewsonic.com/la/ T= 0800-54565 soporte@viewsonic.com
Macau www.hk.viewsonic.com T= 853 2870 0303 service@hk.viewsonic.com
Middle East ap.viewsonic.com/me/ Contact your reseller service@ap.viewsonic.com
Puerto Rico & Virgin Islands
Singapore/Malaysia/ Thailand
South Africa ap.viewsonic.com/za/ Contact your reseller service@ap.viewsonic.com
United Kingdom
United States www.viewsonic.com
www.viewsoniceurope. com
www.viewsoniceurope. com/uk/
www.viewsonic.com/la/ T= 0800-4441185 soporte@viewsonic.com
www.viewsonic.com/la/ T= 01800-9-157235 soporte@viewsonic.com
www.viewsonic.com
www.ap.viewsonic.com T= 65 6461 6044 service@sg.viewsonic.com
www.viewsoniceurope. com/uk/
T=Telephone F=FAX
AUS= 1800 880 818 NZ= 0800 008 822
T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757
www.viewsoniceurope.com/uk/support/call-desk/
www.viewsoniceurope.com/uk/ support/call-desk/
T= 1-800-688-6688 (English) T= 1-866-379-1304 (Spanish) F= 1-909-468-3757
www.viewsoniceurope.com/uk/ support/call-desk/
T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 F= 1-909-468-3757
Email
service@au.viewsonic.com
service.ca@viewsonic.com
service_ie@ viewsoniceurope.com
service.us@viewsonic.com soporte@viewsonic.com
service_gb@ viewsoniceurope.com
service.us@viewsonic.com
ViewSonic VPC191
11
LimitedWarranty
VIEWSONIC®ALL-IN-ONEPC
Whatthewarrantycovers:
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components. The replacement unit will be covered by the balance of the time remaining on the customer’s original limited warranty. ViewSonic provides no warranty for the third-party software included with the product or installed by the customer.
Howlongthewarrantyiseffective:
ViewSonic VPC products are warranted for (1) year from the rst consumer purchase for parts and labor. User is responsible for the back up of any data before returning the unit for service. ViewSonic is not responsible for any data lost.
Whothewarrantyprotects:
This warranty is valid only for the rst consumer purchaser.
Whatthewarrantydoesnotcover:
1. Any product on which the serial number has been defaced, modied or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, re, water, lightning, or other acts of nature, unauthorized
product modication, or failure to follow instructions supplied with the product. b. Any damage of the product due to shipment. c. Removal or installation of the product. d. Causes external to the product, such as electrical power uctuations or failure. e. Use of supplies or parts not meeting ViewSonic’s specications. f. Normal wear and tear. g. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.
4. Removal, installation, one way transportation, insurance, and set-up service charges.
Howtogetservice:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to Customer Support page). You will need to provide your product’s serial number.
2. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
4.3: ViewSonic All-in-One PC Warranty Page 1 of 2 AIO PC_LW01 Rev. 1a 02-11-09
ViewSonic VPC191
12
Limitationofimpliedwarranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and tness for a particular purpose.
Exclusionofdamages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of prots, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
Effectofstatelaw:
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
SalesoutsidetheU.S.A.andCanada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card. For users in Europe and Russia, full details of warranty provided can be found in www. viewsoniceurope.com under Support/Warranty Information.
4.3: ViewSonic All-in-One PC Warranty Page 2 of 2 AIO PC_LW01 Rev. 1a 02-11-09
ViewSonic VPC191
13
Loading...