ViewSonic VP2130b-1 VS10773, VS10773 Service Manual

(VP2130b-1_SM Rev. 1a Dec. 2005)

ViewSonic® 381 Brea Canyon Road, Walnut, California 91789 USA - [phone]

ViewSonic VP2130b-1

Model No. VS10773

21” Color TFT LCD Display

Service Manual

Viewsonic Corporation i Confidential - Do Not Copy VP2130b-1

Copyright

Copyright © 2005 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.

Disclaimer

ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.

Trademarks

Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.

Revision History

Revision SM Editing Date ECR Number

Description of Changes Editor

1a 12/23/2005 Initial release Jamie Chang

TABLE OF CONTENTS

1. Precautions and Safety Notices

2. Specification

3. Front Panel Function Control Description

4. Circuit Description

5. Adjusting Procedure

6. Trouble Shooting Flow Chart

7. Recommended Spare Parts List

8. Exploded View And Exploded Parts List

9. Block Diagram

10. Schematic Diagrams

11. PCB Layout Diagrams

1
4

11

21

34

54
61

65

69
70
75

Viewsonic Corporation ii Confidential - Do Not Copy VP2130b-1

Viewsonic Corporation 1 Confidential - Do Not Copy VP2130b-1

1. Precaution & Safety Notice

1. Caution :

No modification of any circuit should be attempted . Service work should only be performed
after you are thoroughly familiar with all of the following safety checks and servicing guide line

2. Safety Check :

Care should be taken while servicing this LCD display. Because of the high voltage used in the
inverter circuit. These voltage are exposed in such areas as the associated transformer circuits .

3. POWER SUPPLY REQUIREMENTS
The external power converter for this display utilizes AC and DC cords , AC cord is detachable ,

but DC cord is permanently attached . Any attempt to replace another adapter could result in
serious problem on the display .

4. LEAKAGE CURRENT HOT CHECK
4-1 Plug the AC cord directly into the AC outlet. Do not use an isolation transformer during

this check.

4-2 Connect a 1500 ohm , 10 watt resistor , paralleled by a 0.15uF capacitor between each

metallic part and a good earth ground

4-3 Use an AC voltmeter with 1000 ohm / volt or more sensitivity and measure the AC

voltage across the combination 1500 ohm resistor and 0.15uF capacitor.
4-4 Move the resistor connection to each exposed metallic part and measure the voltage.
4-5 Reverse the polarity of the AC plug in the AC outlet and repeat the above measurement.
4-6 Voltage measured must not exceed 1.5 volt RMS, from any exposed metallic part to the

ground. A leakage current tester may be used in the above hot check, in which case any

circuit measured must not exceed 1.0 milliamp. In the case of a measurement exceeding

the 1.0 milliamp value, a rework is required to eliminate the chance of a shock hazard .

To Metal Parts

V

AC VOLTMETER

1500 10W

0.15u
.

Earth Ground

Handling & Placing method

Correct methods : Incorrect Methods :

Only touch the metal-frame of the panel or the front cover of
the monitor . Do not touch the surface of the polarizer .

Surface of the panel is pressed by fingers & this may cause
“ MURA “

Viewsonic Corporation 2 Confidential - Do Not Copy VP2130b-1

Correct methods : Incorrect Methods :

Take out the monitor with cushion Take out the monitor by grasping the LCD panel.

This may cause “ MURA“.

Correct methods : Incorrect Methods :

Place the monitor on a clean & soft foam pad . Place the monitor on foreign objects .

That could scratch the surface of panel

Viewsonic Corporation 3 Confidential - Do Not Copy VP2130b-1

2. Specification

Test Resolution & Frequency 1600x1200 @ 60Hz
Test Image Size Full Size

Contrast and Brightness Controls

Factory Default:
Contrast = 70%, Brightness = 100%

VIDEO INTERFACE

Input Connector (refer the appendix A) D-Sub = DB-15 (Analog)

DVI-A = DVI-I (Analog)
DVI-D = DVI-I (Digital)

Default Input Connector Defaults to the first detected input
Video Cable Strain Relief

Equal to twice the weight of the monitor for

five minutes

Video Cable Connector DB-15 Pin out Compliant DDC/CI

Video RGB (Analog)

Separate Sync / Composite Sync / SOG

Video Signals

TMDS (Digital)
Video Impedance 75 Ohms (Analog), 100 Ohms (Digital)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC/CI Compliant with Revision 1.0
Sync Compatibility Separate Sync / Composite Sync / SOG

Video Compatibility

Shall be compatible with all PC type

computers, Macintosh computers, and after

market video cards

Resolution Compatibility

640 x 350, 640 x 400, 640 x 480, 720 x 400,

720 x 480, 720 x 576, 800 x 600, 832 x 624,

1024 x 768, 1152 x 864, 1152 x 870, 1280 x

720, 1280 x 768, 1280 x 960, 1280 x 1024,

1360 x 768, 1400 x 1050, 1440 x 900, 1600 x

1200, 1680 x 1050, 1920 x 1080, 1920 x 1200

Exclusions Not compatible with interlaced video

Viewsonic Corporation 4 Confidential - Do Not Copy VP2130b-1

USB INTERFACE

Up Stream Connector B type USB port x1
Down Stream Connector A type USB port x4
Compatibility Compliant with Revision 2.0
Power The hub gets power from the display.

POWER SUPPLY

Internal Power Supply Delta EADP-64BF
Input Voltage Range 90 to 264 VAC
Input Frequency Range 47.5 to 63 Hertz
Short Circuit Protection Output can be shorted without damage
Over Current Protection 5.0 A typical at 12.0 VDC
Leakage Current 3.5mA (Max) at 254VAC / 60Hz
Efficiency 80 % typical at 115VAC Full Load
Fuse Internal and not user replaceable
Power Dissipation 64 Watts (typ)
Max Input AC Current 1.5 Arms @ 90VAC, 0.75 Arms @180VAC

Inrush Current (Cold Start)

50 A (max) @ 115VAC
90 A (max) @ 230VAC

Power Supply Cold Start

Shall start and function properly when under

full load, with all combinations of input voltage,

input frequency, and operating temperature.

Power Supply Transient Immunity

Shall be able to withstand an ANSI/IEEE
C62.41-1980 6000V 200 ampere ring wave
transient test with no damage.

Power Supply Line Surge Immunity

Shall be able to withstand 1.5 times nominal

line voltage for one cycle with no damage.

Power Supply Missing Cycle Immunity

Shall be abl

e to function properly, without

reset or visible screen artifacts, when ½ cycle

of AC power is randomly missing at nominal

input.

Power Supply Acoustics

The power supply shall not produce audible

noise that would be detectable by the user.

Audible shall

defined to be in compliance with

ISO 7779 (DIN EN27779:1991) Noise

measurements of machines acoustics. Power

Switch noise shall not be considered.

Power Saving Operation(Method) VESA DPMS Signaling

On Mode < 53 W (Typ) / 56 W (max)

Power Consumption

Active Off < 3 W

Recovery Time On Mode = N/A, Active Off < 8 sec

Viewsonic Corporation 5 Confidential - Do Not Copy VP2130b-1

ELECTRICAL REQUIREMENT

Horizontal / Vertical Frequency

Horizontal Frequency 24 – 92 KHZ
Vertical Refresh Rate 50 – 85* HZ.
Maximum Pixel Clock 165 MHz
Sync Polarity Independent of sync polarity.

Timing Table

Analog

Item Timing

Separated

Composite

SOG

Digital - TMDS

Remark

1 640 x 350 @ 70 Hz, 31.5 KHz

ü ü ü ü

2 640 x 350 @ 85 Hz, 37.9 KHz

ü ü ü

For Separated sync, Only horizontal full
screen, The vertical position is at the
center.

3 640 x 400 @ 60 Hz, 31.5 KHz

ü ü ü ü

For SOG sync, switch 640x400@60Hz
and 640x480@60Hz by [1]+[2] short cut
key (primery = 640x480@60Hz)

4 640 x 400 @ 70 Hz, 31.5 KHz

ü ü ü ü

For Separated Sync, Switch
640x400@70Hz and 720x400@70Hz by
[1]+[2] short cut key (primery =
640x400@70Hz)

5 640 x 400 @ 85 Hz, 37.9 KHz

ü ü ü ü

For Separated Sync, Switch
640x400@85Hz and 720x400@85Hz by
[1]+[2] short cut key (primery =
640x400@85Hz)

6 640 x 480 @ 50 Hz, 24.7 KHz

ü ü ü

7 640 x 480 @ 60 Hz, 31.5 KHz

ü ü ü ü

For SOG sync, switch 640x400@60Hz
and 640x480@60Hz by [1]+[2] short cut
key (primery = 640x480@60Hz)

8 640 x 480 @ 67 Hz, 35 KHz

ü ü ü ü

9 640 x 480 @ 72 Hz, 37.9 KHz

ü ü ü ü

Viewsonic Corporation 6 Confidential - Do Not Copy VP2130b-1

10 640 x 480 @ 75 Hz, 37.5 KHz

ü ü ü ü

11 640 x 480 @ 85 Hz, 43.3 KHz

ü ü ü ü

12 720 x 400 @ 70 Hz, 31.5 KHz

ü ü ü ü

13 720 x 400 @ 85 Hz, 37.9 KHz

ü ü ü ü

For Separated Sync, Switch
640x400@85Hz and 720x400@85Hz by
[1]+[2] short cut key (primery =
640x400@85Hz)

14 720 x 480 @ 60 Hz, 31.5 KHz

ü ü

15 720 x 576 @ 50 Hz, 31.3 KHz

ü ü

16 800 x 600 @ 50 Hz, 24.7 KHz

ü ü ü ü

17 800 x 600 @ 56 Hz, 35.1 KHz

ü ü ü ü

18 800 x 600 @ 60 Hz, 37.9 KHz

ü ü ü ü

19 800 x 600 @ 72 Hz, 48.1 KHz

ü ü ü ü

20 800 x 600 @ 75 Hz, 46.9 KHz

ü ü ü ü

21 800 x 600 @ 85 Hz, 53.7 KHz

ü ü ü ü

22 832 x 624 @ 75 Hz, 49.7 KHz

ü ü ü ü

23 1024 x 768 @ 50 Hz, 39.6 KHz

ü ü ü ü

For Separated and Composite sync,
Switch 1024x768@50Hz and
1280x768@50Hz by [1]+[2] short cut key
(primery = 1024x768@50Hz)

24 1024 x 768 @ 60 Hz, 48.4 KHz

ü ü ü ü

25 1024 x 768 @ 70 Hz, 56.5 KHz

ü ü ü ü

26 1024 x 768 @ 72 Hz, 58.1 KHz

ü ü ü ü

27 1024 x 768 @ 75 Hz, 60 KHz

ü ü ü ü

28 1024 x 768 @ 75 Hz, 60.2 KHz

ü ü ü ü

29 1024 x 768 @ 85 Hz, 68.7 KHz

ü ü ü ü

Viewsonic Corporation 7 Confidential - Do Not Copy VP2130b-1

30 1152 x 864 @ 75 Hz, 67.5 KHz

ü ü ü ü

31 1152 x 870 @ 75 Hz, 68.7 KHz

ü ü ü ü

32 1280 x 720 @ 50 Hz, 37.5 KHz

ü ü

33 1280 x 720 @ 60 Hz, 45 KHz

ü ü

34 1280 x 768 @ 50 Hz, 39.6 KHz

ü ü ü ü

For Separated and Composite sync,
Switch 1024x768@50Hz and
1280x768@50Hz by [1]+[2] short cut key
(primery = 1024x768@50Hz)

35 1280 x 768 @ 60 Hz, 47.4 KHz

ü ü ü

For analog sync

, Switch 1280x768@60Hz

and 1360x768@60Hz by [1]+[2] short cut
key (primery = 1280x768@60Hz)

36 1280 x 768 @ 60 Hz, 47.8 KHz

ü ü ü

37 1280 x 768 @ 75 Hz, 60.3 KHz

ü ü ü ü

38 1280 x 768 @ 85 Hz, 68.6 KHz

ü ü ü ü

39 1280 x 960 @ 50 Hz, 49.4 KHz

ü ü ü ü

40 1280 x 960 @ 60 Hz, 59.7 KHz

ü ü ü ü

41 1280 x 960 @ 75 Hz, 75.2 KHz

ü ü ü ü

42 1280 x 960 @ 85 Hz, 85.9 KHz

ü ü ü ü

43 1280 x 1024 @ 50 Hz, 52.7 KHz

ü ü ü ü

44 1280 x 1024 @ 60 Hz, 64 KHz

ü ü ü ü

45 1280 x 1024 @ 75 Hz, 80 KHz

ü ü ü ü

46 1280 x 1024 @ 85 Hz, 91.1 KHz

ü ü ü ü

47 1360 x 768 @ 60 Hz, 47.7 KHz

ü ü ü ü

For analog sync

, Switch 1280x768@60Hz

and 1360x768@60Hz by [1]+[2] short cut
key (primary = 1280x768@60Hz)

48 1400 x 1050 @ 50 Hz, 54.1 KHz

ü ü ü ü

Viewsonic Corporation 8 Confidential - Do Not Copy VP2130b-1

49 1400 x 1050 @ 60 Hz, 64.7 KHz

ü ü ü

For analog sync, Switch
1400x1050@60Hz and
1680x1050@60Hz

by [1]+[2] short cut key

(primary = 1400x1050@60Hz)

50 1400 x 1050 @ 60 Hz, 65.3 KHz

ü ü

For Separated and Composite sync,
Switch 1400x1050@60Hz and
1680x1050@60Hz by [1]+[2]

short cut key

(primary = 1400x1050@60Hz)

51 1400 x 1050 @ 75 Hz, 82.3 KHz

ü ü ü ü

52 1440 x 900 @ 60 Hz, 55.5 KHz

ü ü ü ü

53 1440 x 900 @ 60 Hz, 59.9 KHz

ü ü ü ü

54 1440 x 900 @ 75 Hz, 75 KHz

ü ü ü ü

55 1440 x 900 @ 85 Hz, 84.8 KHz

ü ü ü ü

56 1600 x 1200 @ 50 Hz, 61.8 KHz

ü ü ü ü

57 1600 x 1200 @ 60 Hz, 75 KHz

ü ü ü ü

58 1680 x 1050 @ 60 Hz, 64.7 KHz

ü ü ü

For analog sync, Switch
1400x1050@60Hz and

1680x1050@60Hz by [1]+[2] short cut key

(primary = 1400x1050@60Hz)

59 1680 x 1050 @ 60 Hz, 65.3 KHz

ü ü

For Separated and Composite sync,
Switch 1400x1050@60Hz and

1680x1050@60Hz by [1]+[2] short cut key

(primary = 1400x1050@60Hz)

60 1920 x 1080 @ 50 Hz, 28.1 KHz

ü ü

61 1920 x 1080 @ 60 Hz, 33.8 KHz

ü ü

62 1920 x 1200 @ 60 Hz, 74 KHz

ü ü ü ü

*1. Tolerance ≧ ±2KHz. (if the range dose not cover other timing mode)
*2. Any timing not in the list, it should display as normal or show on “OUT OF RANGE” OSD message without

blanking.

*3. The image quality of 85Hz mode might be worse than 75Hz.

Primary Presets

1600x1200 @ 60Hz

Viewsonic Corporation 9 Confidential - Do Not Copy VP2130b-1

User Presets

Number of User Presets (recognized timings) Available: 10 presets total in FIFO
configuration

Changing Modes

● Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding
“Auto Adjust” time

● Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting
when execute “Auto Adjust”

● The monitor needs to do “Auto Adjust” the first time a new mode is detected
(see section “0-Touch™ Function Actions”)

● While running Change Mode, Auto Adjust or Memory Recall, the image shall blank

TFT LCD PANEL

Panel Source Identify

The panel code “S” for Samsung panel should be shown on following position,
(1) The lower right side of ID label. (see Figure 2)
(2) The lower right side of UPC label. (see Figure 3)
(3) The F/W version sticker or silkscreen on main board.

Viewsonic Corporation 10 VP2130b-1 Confidential - Do Not Copy

3. Front Panel Function Control Description

Main Menu

with on view

Front Control Panel
shown below in detail

Change the input source,
select the highlighted item,
display the highlighted
item or toggle in different
items

Viewsonic Corporation 11 VP2130b-1 Confidential - Do Not Copy

ViewSonic VP2130

Main Menu Controls

Adjust the menu items shown below by using the up and down buttons.
A. Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and

distortion. Press the [2] button to obtain a sharper image.

NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD
display, then lower the video refresh rate to 60 Hz and set the resolution to its pre -set value.

B. Contrast adjusts the difference between the image background (black level) and the foreground (white level).
C. Brightness adjusts the lamps current to control the screen brightness.
D. Color Adjust provides several color options: preset color temperatures and Custom User Color which allows you

to adjust red (R), green (G), and blue (B). The factory setting for this product is 6500K (6500° Kelvin).

sRGB ─ Standard color space proposed by Microsoft and HP.
9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting).
7500K — Adds blue to the screen image for cooler white
5400K — Adds red to the screen image for warmer white and richer red.
5000K — Adds red to the screen image for warmer white and richer red.
Custom User Color — Individual adjustments for red, green, and blue.
1 To select color (R, G or B) press button [2].
2 To adjust selected color, press ▲ or ▼
3 When you are finished making all color adjustments, press button [1] twice.

E. Information displays the timing mode (video signal input) coming from the graphics card in your computer. See

your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency).
VESA 1280 x 1024 @ 60 Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60
Hertz.

F. Manual Image Adjust controls are explained below:

PIP (Picture in Picture) features are explained below:

PIP enables Picture in Picture function.
PIP Position is for user to adjust the position of PIP. Press button [2] to enter the PIP H. Position and use

▲ or ▼ to adjust the PIP horizontal position. User can press [2] to enter V. Position and use ▲ or ▼
to adjust the PIP vertical position.

PIP SWAP is for user to swap the signal in main window to daughter window while the signal of
daughter window will be displayed in main window.

H. Size (Horizontal Size) adjusts the width of the screen image.
NOTE: Vertical size is automatic with your LCD display.
H./V. Position adjusts horizontal and vertical position of the screen image. You can toggle between Horizontal

and Vertical by pressing button [2]. Horizontal moves the screen image to the left or to the right. Vertical moves
the screen image up and down.

Viewsonic Corporation 12 VP2130b-1 Confidential - Do Not Copy

Fine Tune sharpens focus by aligning the illuminated text and/or graphic characters.
Sharpness adjusts the clarity and focus of the screen image. This feature is disabled when the input signal is

1600x1200@60Hz analog signal.

Scaling features are explained below:
Fill All - the signal will be displayed on the whole screen and wide signal will be adjusted to 4:3 ratio.
Fill Aspect Ratio – the width of the signal will fit the screen horizontally while the vertical directions may

not fit the screen (if the input is wide signal)

1:1 – the signal will be displayed on the center of the screen with 1:1 ratio. This means you may see the

signal at the center of the screen while it is surrounded by black area.

G. Setup Menu controls are explained below:
Language allows you to choose the language used in the menus and control screens.
Resolution Notice displays the recommended resolution for this LCD display.
Enable allows the Resolution Notice to appear on-screen.
Disable will not allow the Resolution Notice to appear on-screen.
OSD Timeout sets the length of time an on-screen display screen is displayed. For example, with a“15

second” setting, if a control is not pushed within 15 seconds, the display OSD disappears.

OSD Position allows you to move the on-screen display menus and control screens.

H. Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset

Timing Mode listed in this user guide.

Viewsonic Corporation 13 VP2130b-1 Confidential - Do Not Copy

OSD Function Menu

A. When in Analog Input Mode

1. Main Menu

Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.

(1) Auto Image Adjust Page:

Press the [2] button to execute the auto image adjust function.

Press the [1] button to exit the page.

(2) Contrast/Brightness Page:

Press the [2] button to enter the contrast adjustment page.

Press the [1] button to exit the page.

1) Contrast Item

Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.

2) Brightness Item

Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.

Press the [1] button to exit the page.

(3) Input Select Page:

Press the [2] button to switch to digital input mode.

(4) Audio Adjust Page:

Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .

Press the [1] button to exit the page.

(5) Color Adjust Page:

Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) sRGB Item

2) 9300K Item

3) 6500K Item

4) 5400K Item

5) 5000K Item

Press the [2] button to select the currently highlighted item.

Press the [1] button to exit the currently highlighted item.

6) User Color Item
Press the [2] button to enter the user color page.

Viewsonic Corporation 14 VP2130b-1 Confidential - Do Not Copy

Press the [1] button to exit the page.

Red, Green, Blue Options:

Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.

Press the [▼] button to decrease the selected color level.

(6) Information Page:

Press the [2] button to enter the information page.
Press the [1] button to exit the information page.

(7) Manual Image Adjust Page:

Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) H./V. Position Item

Press the [2] button to enter the horizontal/vertical postion adjustment page.
Press the [1] button to exit the page.

a) Horizontal Position:

Press the [2] button to enter the vertical position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the image to the right.

Press the [▼] button to shift the image to the left.

b) Vertical Position:

Press the [2] button to return to the horizontal position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the image upward.

Press the [▼] button to shift the image downward.

2) Horizontal Size Item

Press the [2] button to enter the horizontal size adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to make the image wider.
Press the [▼] button to make the image narrower.

3) Fine tune Item

Press the [2] button to enter the fine tuning page.
Press the [1] button to exit the page.
Press “[▲]” Button to adjust character position in one direction.
Press “[▼]“Button to adjust character position in the other direction.

4) Sharpness Item

Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.

(8) Setup Menu Page:

Viewsonic Corporation 15 VP2130b-1 Confidential - Do Not Copy

Press the [2] button to enter the setup menu page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) Language Select Item

Press the [2] button to enter the language selection page.

Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.

English, French… Option

Press the [2] button to select the language.
Press the [1] button to exit the page.

2) Resolution Notice Item

Press the [2] button to enter the resolution notice page.

Press the [1] button to exit the page.

Enable, Disable Option

Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.

Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.

3) OSD Position Item

Press the [2] button to enter the OSD position adjustment page.

Press the [1] button to exit the page.

a) Horizontal Position Option

Press the [2] button to enter the vertical position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the menu to the right.

Press the [▼] button to shift the menu to the left.

b) Vertical Position Option:

Press the [2] button to enter the horizontal position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the menu upward.

Press the [▼] button to shift the menu downward.

4) OSD Time Out Item

Press the [2] button to enter the OSD time out adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to increase the OSD time out.

Press the [▼] button to decrease the OSD time out.

5) OSD Background Item

Press the [2] button to enter the OSD background selection page.

Press the [1] button to exit the page.

Enable, Disable Option

Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.

Press the [2] button to select the highlighted option.

Viewsonic Corporation 16 VP2130b-1 Confidential - Do Not Copy

Press the [1] button to exit the page.

(9) Memory Recall Page

Press the [2] button to execute the memory recall function.
Press the [1] button to exit the page.

2. Other Menu:

This “shortcut” menu is directly accessible without bringing up the OSD.

(1) Contrast Dialog

Press the [▲] or [▼] button to enter the Contrast Dialog.

Press the [1] button to exit the Contrast Dialog.

Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.

Press the [▼] button to decrease the contrast.

(2) Brightness Dialog

Press the [▲] or [▼] button to enter the Brightness Dialog.

Press the [1] button to exit the Brightness Dialog.

Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.

Press the [▼] button to decrease the brightness.

(3) Analog/Digital Dialog

Press the [2] button to toggle between analog and digital modes.

B. When in Digital Input Mode

1. Main Menu

Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.

(1) Auto Image Adjust Page:

Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.

(2) Contrast/Brightness Page:

Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.

1) Contrast Item

Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.

2) Brightness Item

Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.

Press the [1] button to exit the page.

Viewsonic Corporation 17 VP2130b-1 Confidential - Do Not Copy

(3) Input Select Page:

Press the [2] button to switch to analog input mode.

(4) Audio Adjust Page:

Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .

Press the [1] button to exit the page.

(4) Color Adjust Page:

Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) sRGB Item

2) 9300K Item

3) 6500K Item

4) 5400K Item

5) 5000K Item

Press the [2] button to select the currently highlighted item.

Press the [1] button to exit the currently highlighted item.

6) User Color Item
Press the [2] button to enter the user color page.
Press the [1] button to exit the page.

Red, Green, Blue Options:

Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.

Press the [▼] button to decrease the selected color level.

(5) Information Page:

Press the [2] button to enter the information page.
Press the [1] button to exit the information page.

(6) Manual Image Adjust Page:

Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) Sharpness Item

Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.

(7) Setup Menu Page:

Press the [2] button to enter the setup menu page.
Press the [1] button to exit the page.

Viewsonic Corporation 18 VP2130b-1 Confidential - Do Not Copy

Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) Language Select Item

Press the [2] button to enter the language selection page.

Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.

English, French… Option

Press the [2] button to select the language.
Press the [1] button to exit the page.

2) Resolution Notice Item

Press the [2] button to enter the resolution notice page.

Press the [1] button to exit the page.

Enable, Disable Option

Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.

Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.

3) OSD Position Item

Press the [2] button to enter the OSD position adjustment page.

Press the [1] button to exit the page.

a) Horizontal Position Option

Press the [2] button to enter the vertical position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the menu to the right.

Press the [▼] button to shift the menu to the left.

b) Vertical Position Option:

Press the [2] button to enter the horizontal position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the menu upward.

Press the [▼] button to shift the menu downward.

4) OSD Time Out Item

Press the [2] button to enter the OSD time out adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to increase the OSD time out.

Press the [▼] button to decrease the OSD time out.

5) OSD Background Item

Press the [2] button to enter the OSD background selection page.

Press the [1] button to exit the page.

Enable, Disable Option

Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.

Press the [2] button to select the highlighted option.

Press the [1] button to exit the page.

Viewsonic Corporation 19 VP2130b-1 Confidential - Do Not Copy

(8) Memory Recall Page

Press the [2] button to execute the memory recall function.
Press the [1] button to exit the page.

2. Other Menu:

This “shortcut” menu is directly accessible without bringing up the OSD.

(1) Contrast Dialog

Press the [▲] or [▼] button to enter the Contrast Dialog.

Press the [1] button to exit the Contrast Dialog.

Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.

Press the [▼] button to decrease the contrast.

(2) Brightness Dialog

Press the [▲] or [▼] button to enter the Brightness Dialog.

Press the [1] button to exit the Brightness Dialog.

Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.

Press the [▼] button to decrease the brightness.

(3) Analog/Digital Dialog

Press the [2] button to toggle between analog and digital modes.

C. Other Information

When the “No Signal” or “Out of Range” messages appear:

If no input signal is detected, the “No Signal” message will appear in the center of
the screen.
If the V-Sync signal rate is greater than than 85Hz or its resolution is greater than
SXGA, the “Out of Range” message will appear in the center of the screen.

Activating Factory Mode and Burn Mode:

While the device is in standby, press the [2] button, then press the power button to
enter Factory Mode. While Factory Mode is active, an additional menu page titled
“Factory Menu” will be accessible. Press the [2] button to enter the Factory Menu
page, then press the [2] button to enter Burn Mode.

When Installing a New Main Board

1. Enter Factory Mode.

2. Use a PC or chrom to send a 32-tone gray scale signal to the monitor.

3. Select “Auto Color”

Viewsonic Corporation 20 VP2130b-1 Confidential - Do Not Copy

4. Circuit Description

1. Outline

Buttons on the front panel: Power On/Off button, button 2 (ENTER / INPUT SELECT), up arrow button,
down arrow button, button 1 (MENU).

D-sub 15pin connector, DVI-I connector and AC-IN jack are located on the back side of the cabinet.
OSD menu includes the following function;

Auto Image Adjust (only active under analog input)

l Contrast/Brightness
l Input Select
l Color Adjust
l Information
l Manual Image Adjust
l Setup Menu
l Memory Recall

Contrast and Brightness can be directly controlled with UP / DOWN buttons.

2. Connectors

AC inlet : CEE22 typed connector
Video signal connector for analog input: 15P Mini D-Sub

PIN MNEMONIC SIGNAL
1 RV Red Video
2 GV Green Video
3 BV Blue Video
4 NC None
5 GND Ground (DDC

return)
6 RG Red GND
7 GG Green GND
8 BG Blue GND
9 +5V +5V (for DDC)
10 SG Sync GND
11 NC None
12 SDA DDC Data
13 HS Horizontal Sync
14 VS Vertical Sync
15 SCL DDC Clock

CN6

DB15HD

162738495

11

12

13

14

15

10

16 17

Viewsonic Corporation 21 VP2130b-1 Confidential - Do Not Copy

CN2

DVI-I

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

17
18
19
20
21
22
23
24

C1
C2
C3
C4
C5

RX2­RX2+
GND

RX4­RX4+

SCL

SDA

VS

RX1­RX1+
GND

RX3­RX3+

5V

GND

HP

RX0­RX0+
GND

RX5­RX5+
GND

RXC+

RXC-

26

25

RED
GRN

BLU

HS

GND

Video signal connector for digital input: 29pin DVI-D,DVI-A connector

Pin No. Signal Name Description

1 RX2- TMDS negative differential input, channel 2
2 RX2+ TMDS positive differential input, channel 2
3 GND Logic Ground
4 RX4- Reserved. No connection
5 RX4+ Reserved. No connection
6 SCL DDC2B Clock
7 SDA DDC2B Data
8 VS Reserved. No connection

9 RX1- TMDS negative differential input, channel 1
10 RX1+ TMDS positive differential input, channel 1
11 GND Logic Ground
12 RX3- Reserved. No connection
13 RX3+ Reserved. No connection
14 +5V Power
15 GND Logic Ground
16 HP SENSE Pin, Pull High
17 RX0- TMDS negative differential input, channel 0
18 RX0+ TMDS positive differential input, channel 0
19 GND Logic Ground
20 RX5- Reserved. No connection
21 RX5+ Reserved. No connection
22 GND Logic Ground
23 RXC+ TMDS positive differential input, reference

clock

24 RXC- TMDS negative differential input, reference

clock
C1 RED Red Video for DVI-A only
C2 GRN Green Video for DVI-A only
C3 BLU BlueVideo for DVI-A only
C4 HS Horizontal Sync
C5 GND GND

Viewsonic Corporation 22 VP2130b-1 Confidential - Do Not Copy

3. ELECTRICAL SPECIFICATIONS
Standard conditions

Display Area

408.0 x 306.0 mm

Video Signal

0.7Vpp

Contrast

Default

Brightness

Max.

Ambient 20 +/- 5 °C
Input

AC 110~ 240V

Warming up

> 30 min

Display

1600X1200

POWER

Power supply

Input voltage 100~240Vac
Power frequency 50~60Hz

<1.5Arms@90Vac Input current

Inrush current

80A(Max) at 230Vac(cold start)

Power consumption 52W(typical);56W(Max)

Power Management

State Power Indicator

On 56Watts Green
Standby < 3Watts Amber
Off <3Watts Off

Acceptable timing

If the timing is within following specification, this LCD display can automatically function with a certain position.
Horizontal: Sync frequency: 24~92 kHz
Vertical: Sync frequency: 50~85Hz

Signal level and input impedance

Video Signal level: 0.7Vp-p Video signal.
Sync Signal level

H/V Separate: TTL level

Input impedance

Analog video input: 75 ohm
Digital video input: 100 ohm

Viewsonic Corporation 23 VP2130b-1 Confidential - Do Not Copy

Sync input: > 1 k ohm

4. SIGNAL CABLE: Signal cable with Mini D-Sub 15P connectors at both ends. Length: 1.8 meter.

Viewsonic Corporation 24 VP2130b-1 Confidential - Do Not Copy

5. EDID data

AUO

Analog EDID

//////////Displaying Monitor EDID//////////
128 BYTES OF EDID CODE:
0 1 2 3 4 5 6 7 8 9
________________________________________
0 | 00 FF FF FF FF FF FF 00 5A 63
10 | 1C 13 01 01 01 01 01 0F 01 03
20 | 0E 29 1F 78 2E 30 85 A6 56 4A
30 | 99 24 14 50 54 BF EF 80 A9 40
40 | 90 4F 90 40 81 80 81 40 71 4F
50 | 01 01 01 01 48 3F 40 30 62 B0
60 | 32 40 40 C0 13 00 98 32 11 00
70 | 00 1E 00 00 00 FF 00 50 53 42
80 | 30 35 30 31 30 30 30 30 31 0A
90 | 00 00 00 FD 00 32 4B 1E 5C 11
100 | 00 0A 20 20 20 20 20 20 00 00
110 | 00 FC 00 56 50 32 30 33 30 20
120 | 53 45 52 49 45 53 00 FD
______________________________________________________________________
(08-09) ID Manufacturer Name ________________ = VSC
(11-10) Product ID Code _____________________ = 131C
(12-15) Last 5 Digits of Serial Number ______ = Not Used
(16) Week of Manufacture _________________ = 01
(17) Year of Manufacture _________________ = 2005
(10-17) Complete Serial Number ______________ = See Descriptor Block
(18) EDID Version Number _________________ = 1
(19) EDID Revision Number ________________ = 3
(20) VIDEO INPUT DEFINITION:
Analog Signal

0.700, 0.300 (1.000 Vp-p)
Separate Syncs, Composite Sync, Sync on Green
(21) Maximum Horizontal Image Size ________________ = 410 mm
(22) Maximum Vertical Image Size __________________ = 310 mm
(23) Display Gamma ________________________________ = 2.20
(24) Power Management and Supported Feature(s):
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode

Viewsonic Corporation 25 VP2130b-1 Confidential - Do Not Copy

Display Type = R/G/B Color
(25-34) CHROMA INFO:
Red X - 0.648 Green X - 0.289 Blue X - 0.143 White X - 0.313
Red Y - 0.339 Green Y - 0.598 Blue Y - 0.078 White Y - 0.329
(35) ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36) ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37) Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53) Standard Timing Identification:
1600 X 1200 @60Hz
1400 X 1050 @75Hz
1400 X 1050 @60Hz
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
Not Used
Not Used
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1600x1200 Pixel Clock: 162.00 MHz
______________________________________________________________________
Horizontal Image Size: 408 mm Vertical Image Size: 306 mm
Refreshed Mode: Non-Interlaced Normal Display - No Stereo

Horizontal:
Active Time: 1600 pixels Blanking Time: 560 pixels

Viewsonic Corporation 26 VP2130b-1 Confidential - Do Not Copy

Sync Offset: 64 pixels Sync Pulse Width: 192 pixels
Border: 0 pixels Frequency: 75.00 KHz

Vertical:
Active Time: 1200 lines Blanking Time: 50 lines
Sync Offset: 1 lines Sync Pulse Width: 3 lines
Border: 0 lines Frequency: 60.00 Hz

Digital Separate, Horizontal Polarity (+) Vertical Polarity (+)

______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:

Monitor Serial Number:
PSB050100001

______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:

Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 75 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 92 KHz
Pixel Clock - 170 MHz
Secondary GTF - Not Supported

______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:

Monitor Name:
VP2030 SERIES

(126) No Extension EDID Block(s)

Viewsonic Corporation 27 VP2130b-1 Confidential - Do Not Copy

Digital EDID

128 BYTES OF EDID CODE:
0 1 2 3 4 5 6 7 8 9
________________________________________
0 | 00 FF FF FF FF FF FF 00 5A 63
10 | 1C 13 01 01 01 01 01 0F 01 03
20 | 80 29 1F 78 2E 30 85 A6 56 4A
30 | 99 24 14 50 54 BF EF 80 A9 40
40 | 90 4F 90 40 81 80 81 40 71 4F
50 | 31 0A 01 01 48 3F 40 30 62 B0
60 | 32 40 40 C0 13 00 98 32 11 00
70 | 00 1E 00 00 00 FF 00 50 53 42
80 | 30 35 30 31 30 30 30 30 31 0A
90 | 00 00 00 FD 00 32 4B 1E 5C 11
100 | 00 0A 20 20 20 20 20 20 00 00
110 | 00 FC 00 56 50 32 30 33 30 20
120 | 53 45 52 49 45 53 00 52
______________________________________________________________________
(08-09) ID Manufacturer Name ________________ = VSC
(11-10) Product ID Code _____________________ = 131C
(12-15) Last 5 Digits of Serial Number ______ = Not Used
(16) Week of Manufacture _________________ = 01
(17) Year of Manufacture _________________ = 2005
(10-17) Complete Serial Number ______________ = See Descriptor Block
(18) EDID Version Number _________________ = 1
(19) EDID Revision Number ________________ = 3
(20) VIDEO INPUT DEFINITION:
Digital Signal
Non - VESA DFP 1.x Compatible

(21) Maximum Horizontal Image Size ________________ = 410 mm
(22) Maximum Vertical Image Size __________________ = 310 mm
(23) Display Gamma ________________________________ = 2.20
(24) Power Management and Supported Feature(s):
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode
Display Type = R/G/B Color
(25-34) CHROMA INFO:
Red X - 0.648 Green X - 0.289 Blue X - 0.143 White X - 0.313

Viewsonic Corporation 28 VP2130b-1 Confidential - Do Not Copy

Red Y - 0.339 Green Y - 0.598 Blue Y - 0.078 White Y - 0.329
(35) ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36) ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37) Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53) Standard Timing Identification:
1600 X 1200 @60Hz
1400 X 1050 @75Hz
1400 X 1050 @60Hz
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
640 X 400 @70Hz
Not Used
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1600x1200 Pixel Clock: 162.00 MHz
______________________________________________________________________
Horizontal Image Size: 408 mm Vertical Image Size: 306 mm
Refreshed Mode: Non-Interlaced Normal Display - No Stereo

Horizontal:
Active Time: 1600 pixels Blanking Time: 560 pixels
Sync Offset: 64 pixels Sync Pulse Width: 192 pixels
Border: 0 pixels Frequency: 75.00 KHz

Viewsonic Corporation 29 VP2130b-1 Confidential - Do Not Copy

Vertical:
Active Time: 1200 lines Blanking Time: 50 lines
Sync Offset: 1 lines Sync Pulse Width: 3 lines
Border: 0 lines Frequency: 60.00 Hz

Digital Separate, Horizontal Polarity (+) Vertical Polarity (+)

______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:

Monitor Serial Number:
PSB050100001

______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:

Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 75 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 92 KHz
Pixel Clock - 170 MHz
Secondary GTF - Not Supported

______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:

Monitor Name:
VP2030 SERIES

(126) No Extension EDID Block(s)
(127) CheckSum OK

Viewsonic Corporation 30 VP2130b-1 Confidential - Do Not Copy

6. THEORY OF OPERATION

This section describes the function of the LCD monitor per functional block.
This monitor includes MB board, power board and button board and USB board

6.1 MB BOARD

The MB board is a Four-layer, single -landed design with ground and internal planes provided. DC power from the
power board enters the board through a 8P connector. The other connector on the board is for the button board. The
VGA cable is a signal cable that carries the video, sync and DDC signals from the PC VGA adapter. This system
board consists of 4 functional areas: flat panel controller, MCU with flash ROM, and power regulators
USB function.
. 6.1.1 Flat panel controller… Gm1601(U21)
The heart of the system board is the Realtek Gm1601. The Gm1601 is a graphics processing IC designed for LCD
monitors. It provides all key IC functions required for LCD displays. On-chip functions include a high-speed
triple-ADC, PLL, high scaling engine and OSD controller.

a) Clock Generation :

Crystal Input Clock (TCLK and XTAL). This is the input pair to an internal crystal oscillator and
corresponding logic. A 14.318 MHz crystal is recommended.

b) Analog to Digital Converter:

The Gm1601 chip has three ADC's (analog-to-digital converters), one for each color (red, green and
blue) .The analog RGB signals are connected to Gm1601 as described below

Pin Name Pin Number
Red + D2
Red - D1
Green + C2
Green - C1
Blue + B2
Blue - B1

Viewsonic Corporation 31 VP2130b-1 Confidential - Do Not Copy

c) SST 39VF040 Micro Controller: The SST 39VF040 micro controller (MCU) serves as the system micro

controller. It programs the Gm1601 and manages other devices in the system such as the keypad

Pin number

Pin Number Usage

AE24 Key / Power on ,off
P3 NV_RAM (U4) SDA
P4 NV_RAM (U4) SCL
AF24 Key_down
AF26 Key_right
AF25 Key_up
AE25 Key_left
AD24 Key_select
D25 LED_red
D26 LED_green
AC2 LCD panel power1 on / off control
C25 Backlight on / off control

d) Panel interface (Pin B1,B2,C1,C2,D1,D2,A6,B6,A8,B8,A9,B9,A10,B10,) : The Gm1601 driver interface is

highly programmable.

6.1.2 Power Regulator AIC1577 (U23), AP1084 (U16,U20),LT1117(U18): The AIC1577 is a current switching
regulator control IC containing the primary functions required for DC to DC converters and external NMOS
STEP-DOWN PWM controller ,operating input voltaqge from 4.5V to 24V The desired output voltage is
determined by the equation, Volt = 0.8[ ( R218+R219) / R218]. In this case, the output voltage is 5 Volts. The
AIC1577 is a low dropout operation

6.1.3 Power Regulator AP1084 (U16,U20): The AP1084 is a low dropout positive adjustable or fixed mode
regulator with minimum of 5A output current capability. Specifically designed to provide supply for low voltage
IC and low current 3.3V logic supply. AP1084 is guaranteed to have lower than 1.4V dropout at full load
current ,provide well-regulated output of 1.25 to 3.3 with 4.7 to 12V input supply.

6.1.4 Power Regulator LT1117(U18): The LT1117 is a low drop voltage regulator ,provide up to 800 mA of output
current. Concerning fixed version, are offered the output voltage:1.2V,1.8V,2.5V,2.85V,3.0V,3.3V,the regulator to
reach a very tight output voltage tolerance, within ± 1% at 25?C. The adjustable LD1117 is pin to pin compatible
with the other LD1117.

6.3 Power (Inverter) Board

This is a specific power (inverter) board for VP2030B monitor with output of 56W /12V / 2.4A and 20V/1.8A . It
provides 20 VDC to drive the four cold cathode fluorescence tubes in the backlight.

6.3.1 The inverter's electrical specification is described below.

Viewsonic Corporation 32 VP2130b-1 Confidential - Do Not Copy

Rated Input Voltage 20Vdc
Input Voltage Range 19 ~ 21 Vdc
Input Current 1.8A(MAX)

Input

On / Off control Voltage 2.5~5.25 for on , 0~1 for off
Rated Output Strike-on Voltage 1800Vrms
Rated Output Voltage 700~900Vrms
Rate Output Frequency 35~80KHz

Output

Rated Output Current 5.5~8.0 mA

6.3.2 power

This is a general purpose AC / DC adapter which converts 90~240 Vac to a stabilized DC voltage: 12 Volts, with a
rated output current of 2.4A. The electrical specification is described below.

Rated Input Voltage 90~240 Vac , 50 / 60Hz
Operation Input Voltage 90~260 Vac , 47 ~ 63Hz
Input Current <2.4A
Inrush Current <80A@230Vac
Standby Input Voltage 12Vdc
Output Voltage Regulation +/-5%
Output Ripple & Noise 300mVp-p
Rate Output Current <2.4A

6.4 USB Board: Include one Up-Stream port and four Down-Stream ports each one port cann’t exceed 1A

6.5 DDC/CI: VP2030B monitor can use Perfect Suit offer DDC/CI function, make use of Perfect Suit sofeware to

ubstitute OSD function even more , for instance ,the adjustment of the color temperature, adjustment of the
luminance ,the more special one is the rotation of the screen.

Viewsonic Corporation 33 VP2130b-1 Confidential - Do Not Copy

5. Adjusting Procedure

1. Function test

(1) Test equipment

Color video signal and pattern generator (or PC with WUXGA resolution)

(2) Test condition

Before function testing and alignment, the unit must warm up for at least 30 minutes under the following
conditions:

1. Room temperature

2. With full-white screen , RGB , black pattern

3. with cycled display modes.

2. Test display modes

Timing Table

Analog

Item

Timing

Separated

Composite

SOG

Digital - TMDS

Remark

1 640 x 350 @ 70 Hz, 31.5 KHz

ü ü ü ü

2 640 x 350 @ 85 Hz, 37.9 KHz

ü ü ü

For Separated sync, Only horizontal full
screen, The vertical position is at the
center.

3 640 x 400 @ 60 Hz, 31.5 KHz

ü ü ü ü

For SOG sync, switch 640x400@60Hz and
640x480@60Hz by [1]+[2] short cut key
(primery = 640x480@60Hz)

4 640 x 400 @ 70 Hz, 31.5 KHz

ü ü ü ü

For Separated Sync, Switch
640x400@70Hz and 720x400@70Hz by
[1]+[2] short cut key (primery =
640x400@70Hz)

5 640 x 400 @ 85 Hz, 37.9 KHz

ü ü ü ü

For Separated Sync, Switch
640x400@85Hz and 720x400@85Hz by
[1]+[2] short cut key (primery =
640x400@85Hz)

6 640 x 480 @ 50 Hz, 24.7 KHz

ü ü ü

7 640 x 480 @ 60 Hz, 31.5 KHz

ü ü ü ü

For SOG sync, switch 640x400@60Hz and
640x480@60Hz by [1]+[2] short cut key
(primery = 640x480@60Hz)

8 640 x 480 @ 67 Hz, 35 KHz

ü ü ü ü

9 640 x 480 @ 72 Hz, 37.9 KHz

ü ü ü ü

Viewsonic Corporation 34 VP2130b-1 Confidential - Do Not Copy

10 640 x 480 @ 75 Hz, 37.5 KHz

ü ü ü ü

11 640 x 480 @ 85 Hz, 43.3 KHz

ü ü ü ü

12 720 x 400 @ 70 Hz, 31.5 KHz

ü ü ü ü

13 720 x 400 @ 85 Hz, 37.9 KHz

ü ü ü ü

For Separated Sync, Switch
640x400@85Hz and 720x400@85Hz by
[1]+[2] short cut key (primery =
640x400@85Hz)

14 720 x 480 @ 60 Hz, 31.5 KHz

ü

15 720 x 576 @ 50 Hz, 31.3 KHz

ü

ü

Use Hot Key to switch the color.

16 800 x 600 @ 50 Hz, 24.7 KHz

ü ü ü ü

17 800 x 600 @ 56 Hz, 35.1 KHz

ü ü ü ü

18 800 x 600 @ 60 Hz, 37.9 KHz

ü ü ü ü

19 800 x 600 @ 72 Hz, 48.1 KHz

ü ü ü ü

20 800 x 600 @ 75 Hz, 46.9 KHz

ü ü ü ü

21 800 x 600 @ 85 Hz, 53.7 KHz

ü ü ü ü

22 832 x 624 @ 75 Hz, 49.7 KHz

ü ü ü ü

23 1024 x 768 @ 50 Hz, 39.6 KHz

ü ü ü ü

For Separated and Com

posite sync, Switch

1024x768@50Hz and 1280x768@50Hz by
[1]+[2] short cut key (primery =
1024x768@50Hz)

24 1024 x 768 @ 60 Hz, 48.4 KHz

ü ü ü ü

25 1024 x 768 @ 70 Hz, 56.5 KHz

ü ü ü ü

26 1024 x 768 @ 72 Hz, 58.1 KHz

ü ü ü ü

27 1024 x 768 @ 75 Hz, 60 KHz

ü ü ü ü

28 1024 x 768 @ 75 Hz, 60.2 KHz

ü ü ü ü

29 1024 x 768 @ 85 Hz, 68.7 KHz

ü ü ü ü

30 1152 x 864 @ 75 Hz, 67.5 KHz

ü ü ü ü

31 1152 x 870 @ 75 Hz, 68.7 KHz

ü ü ü ü

32 1280 x 720 @ 50 Hz, 37.5 KHz

ü

ü

33 1280 x 720 @ 60 Hz, 45 KHz

ü

ü

34 1280 x 768 @ 50 Hz, 39.6 KHz

ü ü ü ü

For Separated and Composite sync, Switch

1024x768@50Hz and 1280x768@50Hz by
[1]+[2] short cut key (primery =
1024x768@50Hz)

35 1280 x 768 @ 60 Hz, 47.4 KHz

ü ü ü

For analog sync, Switch 1280x768@60Hz
and 1360x768@60Hz by [1]+[2] short cut
key (primery = 1280x768@60Hz)

36 1280 x 768 @ 60 Hz, 47.8 KHz

ü

ü

ü

37 1280 x 768 @ 75 Hz, 60.3 KHz

ü ü ü ü

Viewsonic Corporation 35 VP2130b-1 Confidential - Do Not Copy

38 1280 x 768 @ 85 Hz, 68.6 KHz

ü ü ü ü

39 1280 x 960 @ 50 Hz, 49.4 KHz

ü ü ü ü

40 1280 x 960 @ 60 Hz, 59.7 KHz

ü ü ü ü

41 1280 x 960 @ 75 Hz, 75.2 KHz

ü ü ü ü

42 1280 x 960 @ 85 Hz, 85.9 KHz

ü ü ü ü

43 1280 x 1024 @ 50 Hz, 52.7 KHz

ü ü ü ü

44 1280 x 1024 @ 60 Hz, 64 KHz

ü ü ü ü

45 1280 x 1024 @ 75 Hz, 80 KHz

ü ü ü ü

46 1280 x 1024 @ 85 Hz, 91.1 KHz

ü ü ü ü

47 1360 x 768 @ 60 Hz, 47.7 KHz

ü ü ü ü

For analog sync, Switch 1280x768@60Hz
and 1360x768@60Hz by [1]+[2] short cut
key (primery = 1280x768@60Hz)

48 1400 x 1050 @ 50 Hz, 54.1 KHz

ü ü ü ü

49 1400 x 1050 @ 60 Hz, 64.7 KHz

ü ü ü

For analog sync, Switch 1400x1050@60Hz

and 1680x1050@60Hz by [1]+[2] short cut
key (primery = 1400x1050@60Hz)

50 1400 x 1050 @ 60 Hz, 65.3 KHz

ü ü

For Separated and Composite sync, Switch

1400x1050@60Hz and 1680x1050@60Hz
by [1]+[2] short cut key (primery =
1400x1050@60Hz)

51 1400 x 1050 @ 75 Hz, 82.3 KHz

ü ü ü ü

52 1440 x 900 @ 60 Hz, 55.5 KHz

ü ü ü ü

53 1440 x 900 @ 60 Hz, 59.9 KHz

ü ü ü ü

54 1440 x 900 @ 75 Hz, 75 KHz

ü ü ü ü

55 1440 x 900 @ 85 Hz, 84.8 KHz

ü ü ü ü

56 1600 x 1200 @ 50 Hz, 61.8 KHz

ü ü ü ü

57 1600 x 1200 @ 60 Hz, 75 KHz

ü ü ü ü

58 1680 x 1050 @ 60 Hz, 64.7 KHz

ü ü ü

For analog sync, Switch 1400x1050@60Hz

and 1680x1050@60Hz by [1]+[2] short cut
key (primery = 1400x1050@60Hz)

59 1680 x 1050 @ 60 Hz, 65.3 KHz

ü ü

For Separated and Composite sync, Switch

1400x1050@60Hz and 1680x1050@60Hz
by [1]+[2] short cut key (primery =
1400x1050@60Hz)

60 1920 x 1080 @ 50 Hz, 28.1 KHz

ü

ü

61 1920 x 1080 @ 60 Hz, 33.8 KHz

ü

ü

62 1920 x 1200 @ 60 Hz, 74 KHz

ü ü ü ü

*1. Tolerance ≧ ±2KHz. (if the range dose not cover other timing mode)
*2. Any timing not in the list, it should display as normal or show on “OUT OF RANGE” OSD message without

Viewsonic Corporation 36 VP2130b-1 Confidential - Do Not Copy

blanking.

*3. The image quality of 85Hz mode might be worse than 75Hz.

Primary Presets

1600x1200 @ 60Hz

User Presets

Number of User Presets (recognized timings) Available: 10 presets total in FIFO configuration

Changing Modes

● Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding “Auto Adjust” time

● Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting when execute

“Auto Adjust”

● The monitor needs to do “Auto Adjust” the first time a new mode is detected
(see section “0-Touch™ Function Actions”)

● While running Change Mode, Auto Adjust or Memory Recall, the image shall blank

3. Test pattern

Item

Test condition Pattern Specification Remark

1 Frequency & performance Cross-hatch pattern No noise is allowed, all colors must

be clear

Pattern 1

2 Monitor saturation 16-gray scale pattern 3 to 4 levels must be saturated when

brightness and contrast are set to
100%

Pattern 2

3 RGB color performance RGB color Check the color temperature of

RGB signal color

Pattern 3,
4, 5

4 Sub-pixel defect RGB color Check the sub-pixel defect Pattern 3,

4 , 5

5 Full white Full white Check the brightness and contrast

ratio, and check for bright pixel
defects

Pattern 6

6 Full black Full black Pattern 7

7. 5-cycle pattern 5-cycle pattern Check the BU Pattern 8

8. 1-dot pattern 1-dot pattern Check the flicker Pattern 9

Viewsonic Corporation 37 VP2130b-1 Confidential - Do Not Copy

Pattern 1 Pattern2

Pattern 3 Pattern4

Pattern 5 Pattern6

Viewsonic Corporation 38 VP2130b-1 Confidential - Do Not Copy

Pattern 7 Pattern 8

Pattern 9

Viewsonic Corporation 39 VP2130b-1 Confidential - Do Not Copy

Firmware update procedure :

When you received a received monitor , please check whether the firmware version. If not , please following procedure to
upgrade to the latest version .

1. Equipment needed :

- VP2130

- PC ( Personal computer )

- USB (A Male to B Male) cable

- Genesis firmware update board

- 9-Male to 9-Female serial cable

- VGA cable

Viewsonic Corporation 40 VP2130b-1 Confidential - Do Not Copy

2. Connection :

The 9-pin serial cable connects the com port of PC and the Genesis firmware update board. VP2130 and the Genesis
firmware update board is connected by VGA cable. The male A to male B USB cable connects the PC and Genesis
firmware update board.

Appendix A : How to install the software for ISP :

0. To setup ISP environment :

Hardware:
PC or notebook, 9-pin serial cable, VGA cable and USB cable (Male A to Male B). If your PC does not have serial
port, please get a USB to RS232 cable.

Software:
If the OS is Win2000 or WinXP , please install “GProbe”

In order to ensure can execute ISP program, please connect the USB to RS232 cable and set it as COM 1 in control panel if your

PC does not have COM port

Viewsonic Corporation 41 VP2130b-1 Confidential - Do Not Copy

0.1 Double-click the “ GProbe5.0.exe” in Windows & install the program. , see Fig 0.1

Fig 0.1

0.2 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.2

Fig. 0.2

Viewsonic Corporation 42 VP2130b-1 Confidential - Do Not Copy

0.3 Check the “I accept the agreement” then press “ Next “ , see Fig. 0.3

Fig. 0.3

0.4 Keep on press “ Next “ , see Fig. 0.4

Fig. 0.4

Viewsonic Corporation 43 VP2130b-1 Confidential - Do Not Copy

0.5 Keep on press “ Next “ , see Fig. 0.5

Fig. 0.5

0.6 Click “Next” to start the installation. See Fig 0.6

Fig. 0.6

Viewsonic Corporation 44 VP2130b-1 Confidential - Do Not Copy

0.7 If you see this message, click “Yes”. See Fig 0.7.

Fig. 0.7

0.8 If you see the Fig 0.8, click “Finich” button to restart the system.

Fig. 0.8

0.9 Installation is completed

Viewsonic Corporation 45 VP2130b-1 Confidential - Do Not Copy

Appendix B : How to use software to upgrade the BIOS :

1.1 After installation , we could find the shortcut in the setting path or the program bar ( default setting ) , see Fig 1.1

Fig. 1.1

1.2 Move your mouse cursor to GProbe 5 and click it. You will see the Fig. 1.2

Fig. 1.2

1.3 Please create a directory such as “ISP” below the root directory (the path is “drive letter”:\ISP now).

Viewsonic Corporation 46 VP2130b-1 Confidential - Do Not Copy

1.4 Copy the create a text file with the following string and save it as “ISP.txt”

SetBuffer 0x1000 4096
RAMWrite d:\GNSSISP\loader.hex
Run 0x500
RAMWrite d:\GNSSISP\isp8.hex
Run 0x580
FlashErase
FastFlashWrite d:\GNSSISP\rd_monitor.hex

1.5 Set the monitor to Factory Mode by pressing “2” and “Power” at the same time.

1.6 Click the right-lower terminal window and type “batch d(or other drive letter):\ISP\isp.txt” in the upper blank area then
click “Execute” button. See the Fig 1.3.

Fig. 1.3

Viewsonic Corporation 47 VP2130b-1 Confidential - Do Not Copy

1.7 After click the “Execute” button, you will see the terminal information in Fig. 1.4 . When the message “Batch: command

successful” is shown, the flash progress is completed.

Fig. 1.4

Viewsonic Corporation 48 VP2130b-1 Confidential - Do Not Copy

VP2130b-1 / VP2130b-1H series de-assembling procedure

1. Move the monitor our from carton 2. Put the monitor on desk & face down

3. Remove the VESA cover 4. Loose the screws & remove the stand

5. Separate the hook by tool (coin or screw-driver) 6. Remove the cover & AL-Foil &Mylar& Button/B CABLE

Viewsonic Corporation 49 VP2130b-1 Confidential - Do Not Copy

7. Loose the

INVERTER SHIELDING SCREW

8. Tear off the yellow tape &Pull out the CCFL cables

9. Loose the

INVERTER/B screw

10. Loose the SHIELDING SCREW

1 1. Tear off the yellow tape &Pull out the LVDS CABLE 12.Remove the shielding

Viewsonic Corporation 50 VP2130b-1 Confidential - Do Not Copy

15. Loose the bezel 16.Remove the Button/B

17. Loose the shield 18. Remove the PCBA & mylar

19. Loose the IO-NUT SCREW

20. Take out PCBA & remove the cables

Viewsonic Corporation 51 VP2130b-1 Confidential - Do Not Copy

19. Loose the BKT-T/B SCREW 20. Loose the BKT-R/L SCREW

Viewsonic Corporation 52 VP2130b-1 Confidential - Do Not Copy

VP2130b-1 / VP2130b-1H Series packing method

1. Sticker on LCD protection film 2. Put the monitor into the PE or EPE bags

3. Put on the end-cap left / right 4. Put the monitor into carton

5. Put all accessories into carton 6. Seal the monitor

Face-up

handler

Power cable

VGA & DVI cable

Users manual

Viewsonic Corporation 53 VP2130b-1 Confidential - Do Not Copy

Monitor Cann't Boot-

Up

Check Power Board

CN7 PIN 1,2

Change Power Board

Check Key Bottom

Change Key Button

Check Crystal

X1

Change Crystal

NG

NG

NG

Check M/B

5V,3.3V.2.5V

1.8V

Change M/B

NG

Change M/B

6. Trouble Shooting Flow Chart

Viewsonic Corporation 54 VP2130b-1 Confidential - Do Not Copy

Black Screen

Check M/B Panel

ON/OFF CN7

PIN 8 3.3V

Change Power Board

Check M/B

CN7 PIN 7

Brightness MAX

3.3V

Change Scalar M/B

Change Scalar M/B

NG

NG

NG

Check Panel Vcc

5V

Panel Break

Viewsonic Corporation 55 VP2130b-1 Confidential - Do Not Copy

No Signal

Check H/V Sync

U22 PIN 14,15

Change VGA Cable

Check CN5

Pin Signal

Change Scalar M/B

Change Scalar M/B

NG

NG

NG

Check VGA

CARD

Change Scalar M/B

Check VGA

Cable

Change VGA Card

Viewsonic Corporation 56 VP2130b-1 Confidential - Do Not Copy

No Signal In DVI-D

Check H/V Sync

U22 PIN 14,15

Change DVI Cable

Check CN5

Pin Signal

Change Scalar M/B

Change Scalar M/B

NG

NG

NG

Check VGA

CARD

Change Scalar M/B

Check DVI-D

Cable

Change VGA Card

Viewsonic Corporation 57 VP2130b-1 Confidential - Do Not Copy

No Signal In DVI_A

Contact To VGA

Card Seller

Change DVI Cable

Change Scalar M/B

NG

NG

NG

Check VGA Card

Support DVI-A

Signal

Change Scalar M/B

Check DVI

Cable

Check H/V Sync

U22 PIN 14,15

Check CN5

Signal

NG

Change Scalar M/B

Viewsonic Corporation 58 VP2130b-1 Confidential - Do Not Copy

U.S.B doesn't Work

Check USB M/B

CN6 PIN1,2

Device Problem

Check USB M/B

U3 3.3V

Change Scalar M/B

Change USB M/B

NG

NG

NG

Change USB M/B

NG

Check USB M/B

FUSE F1~F4

Short

Check USB M/B

R20 5V

Change USB M/B

Viewsonic Corporation 59 VP2130b-1 Confidential - Do Not Copy

OSD Pivot doesn't

Work

When Pivot

0 or 90 Degree

Check R178

Voltege

Change Scalar M/B

Change Scalar M/B

NG

NG

Check R178

Voltage 3.3V

Solder R178 Both

Ends

Viewsonic Corporation 60 VP2130b-1 Confidential - Do Not Copy

7. Recommended Spare Parts List

Rev: 1b

Serial No. Prefix: PSD

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Universal number#

Q'ty

1

Accessories:

Power Cord A-PC-0106-0224 DM333181G97 Power cable 1

2 Button Board L0VP BUTTON/B ASSY GP 12/08/05: Update Vendor P/N B-00004350

23L0VPBB007

1SL0VPBB001 Button board 1

3 Inverter module B-00004352 AS023190407 Inverter board 1

Main Board

B-00004349 21LAVPMB003 Main board 1

Main Board LAVP (GM1601-LF-CF) GP B-00004643 1SLAVPMB018 Main board 1

5 Power module DTA)EADP-64BF B,90~264V GP 12/08/05: Update Vendor P/N B-00004348

AS08B50000

AS08B500000 Power board 1

6 USB Board 0VP ASSY(GP) 12/08/05: Update Vendor P/N B-00004351

22L0VPUB005

1SL0VPUB001 USB board 1

7

Back Cover Assembly

C-00004422

25LAVPLC008

back cover assy 1

8 Base sub assy C-00004356 38LAVPBS002 Base sub assy 1

9 Front Bezel assy LAVP GP 12/08/05: Update Vendor P/N C-00004421

24LAVPLB001

34LAVPLB001

front bezel ass'y 1
10 Stand sub assy C-00004355 37LAVPSU003 Stand sub assy 1
11 STAND VESA COVER LAVP(EALAVP03,REV3A)GP 12/08/05: Added

C-00004642

EALAVP03011 stand vesa cover 1

12 Cable MB-LCD CB-00004424 DDLAVPLC104 Cable MB-LCD 1
13 Cable POWER-MB CB-00004423 DDLAVPPB104 Cable POWER-MB 1
14 DVI cable CB-00004361 DDWCVPDV019 DVI-I cable 1
15 FFC Cable MB-BB CB-00004357 DEFC3609000 Cable MB-BB 1
16 VGA cable CB-00004360 DD0M7TPC005 VGA cable 1
17

Documentation:

User manual + CD wizard DC-00004425 HGLAVP01014 User manual 1

18

Electronic

21.3" Samsung TFT LCD panel E-00004426 AAM213U6008 LCD panel 1

19 Screw M3.0*5.0-B BLACK HW-00004364 MM30050BJ21 Screw 25

Screw M4.0*8-B (NI, NYLOK)

M-SCW-0824-0795

MM40080BCI5

Screw 8

SCREW M3.0*3.0-I

M-SCW-0824-6761

MM30030IBJ4 panel to L/F BKT 4

21 IO NUT LI1(MBLI1004,REV3A)GP 12/08/05: Added

M-MS-0808-8986

MBLI1004018 DVI,D-SUB 4

22

Miscellaneouse:

LCD film M-00004427 JXLAVP01011 LCD FILM 1
23 Carton P-00004428 HFLAVP01013 carton 1
24 End cap (L) P-00004429

HBLAVP01010

cushion 1

25 End cap (R) P-00004430

HBLAVP02016

cushion 1

26 PE bags P-00004159 HAL0T002019 PE bags 1

Remark 1:

Above listed items are examples, supplier can expand the rows to add more necessary items.

Remark 2:

ViewSonic Model Number: VS10773-1W

All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate

RECOMMENDED SPARE PARTS LIST (VP2130b-1)

Description

Board Assembly:

Cables:

Hardware:

Packing Material:

20

Cabinets:

12/08/05: Removed & Replaced Part

12/08/05: Removed & Replaced Part

4

Viewsonic Corporation 61 VP2130b-1 Confidential - Do Not Copy

Rev: 1b

Serial No. Prefix: PSD

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Universal number#

Q'ty

1

Accessories:

Power Cord A-PC-0106-0224 DM333181G97 Power cable 1

2 Button Board L0VP BUTTON/B ASSY GP 12/08/05: Update Vendor P/N B-00004350

23L0VPBB007

1SL0VPBB001 Button board 1

3 Inverter module B-00004352 AS023190407 Inverter board 1

Main Board B-00004349 21LAVPMB003 Main board 1

Main Board LAVP (GM1601-LF-CF) GP B-00004643 1SLAVPMB018 Main board 1

5 Power module DTA)EADP-64BF B,90~264V GP 12/08/05: Update Vendor P/N B-00004348

AS08B50000

AS08B500000 Power board 1

6 USB Board 0VP ASSY(GP) 12/08/05: Update Vendor P/N B-00004351

22L0VPUB005

1SL0VPUB001 USB board 1

7

Back Cover Assembly

C-00004422

25LAVPLC008

back cover assy 1

8 Base sub assy C-00004356 38LAVPBS002 Base sub assy 1

9 Front Bezel assy LAVP GP 12/08/05: Update Vendor P/N C-00004421

24LAVPLB001

34LAVPLB001

front bezel ass'y 1
10 Stand sub assy C-00004355 37LAVPSU003 Stand sub assy 1
11 STAND VESA COVER LAVP(EALAVP03,REV3A)GP 12/08/05: Added

C-00004642

EALAVP03011 stand vesa cover 1

12 Cable MB-LCD CB-00004424 DDLAVPLC104 Cable MB-LCD 1
13 Cable POWER-MB CB-00004423 DDLAVPPB104 Cable POWER-MB 1
14 DVI cable CB-00004361 DDWCVPDV019 DVI-I cable 1
15 FFC Cable MB-BB CB-00004357 DEFC3609000 Cable MB-BB 1
16 VGA cable CB-00004360 DD0M7TPC005 VGA cable 1
17

Documentation:

User manual + CD wizard DC-00004425 HGLAVP01014 User manual 1

18

Electronic

21.3" Samsung TFT LCD panel E-00004426 AAM213U6008 LCD panel 1

19 Screw M3.0*5.0-B BLACK HW-00004364 MM30050BJ21 Screw 25

Screw M4.0*8-B (NI, NYLOK) M-SCW-0824-0795

MM40080BCI5

Screw 8

SCREW M3.0*3.0-I

M-SCW-0824-6761

MM30030IBJ4 panel to L/F BKT 4

21 IO NUT LI1(MBLI1004,REV3A)GP 12/08/05: Added

M-MS-0808-8986

MBLI1004018 DVI,D-SUB 4

22

Miscellaneouse:

LCD film M-00004427 JXLAVP01011 LCD FILM 1
23 Carton P-00004428 HFLAVP01013 carton 1
24 End cap (L) P-00004429

HBLAVP01010

cushion 1

25 End cap (R) P-00004430

HBLAVP02016

cushion 1

26 PE bags P-00004159 HAL0T002019 PE bags 1

Remark 1:

Above listed items are examples, supplier can expand the rows to add more necessary items.

Remark 2:

ViewSonic Model Number: VS10773-1W

All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate

RECOMMENDED SPARE PARTS LIST (VP2130b-1)

Description

Board Assembly:

Cables:

Hardware:

Packing Material:

20

Cabinets:

12/08/05: Removed & Replaced Part

12/08/05: Removed & Replaced Part

4

Viewsonic Corporation 62 VP2130b-1 Confidential - Do Not Copy

ViewSonic Model Number: VS10773-1W
Rev: 1a

Serial No. Prefix: PSD

Item

ViewSonic P/N

Ref. P/N

Description

Location

Universal number#

Q'ty

1

#N/A

1LAVPZXVS09

LAVP LCD MONITOR(USA,VP2130) GP

2

B-00004349

21LAVPMB003

LAVP M/B ASSY(GM1601-LF-CF) GP

13#N/A

31LAVPSS009

LAVP M/B S/S ASSY(GM1601-LF-CF) GP

1

4 #N/A CC647T1MD05 CAP EC 47U 10V(+-20%,105C,5*11,2000H)GP

C5,C6,C28,C29,C44,C46,C47,C59,
C62,C64,C76,C77,C96,C100,C103,
C107,C119,C126,C134,C137,C138

21

5

#N/A

CC71004MD09

CAP ELEC DIP 100U 25V(+-20%,105C,6*7) GP

C12416

#N/A

CC73303MD69

CAP ELEC DIP 330U 16V(+-20%,105C,8*9) GP

C174,C204,C205

37#N/A

CC810T1MD13

CAP EC 1000U6.3V(+-20%,105C,8*15,2KH)GP

C206

1

8 #N/A CC710T3MD04 CAP EC 100U 16V +-20%,105C,6.3*5,1000 GP C180,C181,C184,C185,C187,C188 6

9 #N/A DC11050K007

CHOKE COIL 100UH(5A,+-10%,HKH050-

101K)GP

L28 1

10

#N/A

DHR31110002

ROLL BALL SWITCH 4P RBS311100 GP

U19111

#N/A

BG614318072

XTAL DIP 14.318MHZ(+-30PPM,49/US) GP

X1112

#N/A

DFDI30FR103

CONN DVI-I DIP30P 3R FR(P1.905,H10.04)GP

CN2113

#N/A

DFDS15FR076

CONN D-SUB 15P 3R FR(P1.15,H12.55) GP

CN1

1

14 #N/A DFHD30MR267 CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP CN5 1

15

#N/A

DFHD04FR007

CONN DIP HEADER 4P 2R FR(P2.5,H5) GP

CN6116

#N/A

DFHD08MR319

CONN DIP HEADER 8P 1R MR(P2.0,H4.1) GP

CN7117

B-00004350

23L0VPBB007

L0VP BUTTON/B ASSY GP

1

18 #N/A DAL0VPTB011 PCB(BUTTON) L0VP TB(2L,111*13,REVA) GP 1

19 #N/A DHPTMG53311

SWITCH PU-BUTTON TMG-533-T/R(160+-

50G)GP

SW1,SW2,SW3,SW4,SW5 5

20

#N/A

DFFC11FR001

CONN SMD FFC 11P 1R FR(P 1,H1.55) GP

CN1121

#N/A

BEYG0003ZA5

LED(SMD) Y/G(KPB-3025NSGC-F01) GP

LED1

1

22 #N/A AS08B500000

PWR MODULE(DTA)EADP-64BF B,90~264V

GP123

B-00004351

22L0VPUB005

L0VP USB/B ASSY(GP)

124#N/A

32L0VPSS007

L0VP USB/B S/S ASSY(GP)

125#N/A

CC71004MD09

CAP ELEC DIP 100U 25V(+-20%,105C,6*7) GP

C1,C7,C13,C16,C26,C27

6

26 #N/A DFUB08MR009 CONN DIP USB A-T D-8P 2R MR(P2,H15.35)GP J1,J2 2

27 #N/A DFUB04MR001 CONN DIP USB B-T 4P 2R MR(P2.5,H11.3) GP USB1 1

28 #N/A BG612000202 XTAL DIP 12MHZ(+-30PPM,HC-49/S TYPE) GP X1 1

29

#N/A

DFHD04MR001

CONN DIP HEADER 4P 2R MR(P2.54,H5) GP

CN1130

C-00004421

24LAVPLB001

LAVP LCD BEZEL ASSY GP

131#N/A

34LAVPLB001

LAVP LCD BEZEL SUB ASSY GP

1

32 CB-00004357 DEFC3609000

FFC CABLE MB-BUTTOM(11P,360MM)LAVP

GP133

CB-00004423

DDLAVPPB104

CABLE POWER-MB(8P,55MM)LAVP GP

1

34 CB-00004424 DDLAVPLC104

CABLE MB-LCD(30P,100MM,SAM)LAVP/TAPE

GP135

#N/A

FALAVP01019

PCB SHIELD LAVP(FALAVP01,REV3A)GP

1

36 #N/A FALAVP02015 INVER SHIELD LAVP(FALAVP02,REV3A)GP 1

37 #N/A FALAVP03011 LCD BRACKET-R LAVP(FALAVP03,REV3A)GP 1

38 #N/A FALAVP04018 LCD BRACKET-L LAVP(FALAVP04,REV3A)GP 1

39 #N/A FALAVP05014

LCD BAK BOTTOM

LAVP((FALAVP05,REV3A)GP

1

40 #N/A FCLAVP01011

INVERTER MYLAR

LAVP(FCLAVP01,REV3A)GP

1

41

HW-00004364

MM30050BJ21

SCREW M3.0*5.0-B BLACK GP

25

42 #N/A FALAVP08013

LCD BRACKET TOP LAVP(FALAVP080,R3A)

GP

1

43 #N/A MBL9V001019

IO NUT L9VDA-5(MBL9V001,REV3A)M3*15*6

GP

4

44 #N/A FCLAVP02017 AL FOIL LAVP(FCLAVP02,REV3A)210*10 GP 1

45

#N/A

FCLAVP03013

AL FOIL LAVP(FCLAVP03,REV3A)65*30 GP

3

46 #N/A FCW0E002016

POWER MYLAR W0E-A1(FAW0E002,

REV3A)GP

1

47 #N/A FCLAVP04010

POWER MYLAR TOP LAVP(FCLAVP04,R3A)

GP148

#N/A

FCLAVP05016

SHIELD MYLAR LAVP(FCLAVP05,R3A) GP

1

49 #N/A FCLAVP06012 BUTTON/B MYLAR LAVP(FCLAVP06,R3A) GP 1

50

#N/A

FCLAVP07019

BUTTON EVA LAVP(FCLAVP07,REV3A) GP

151M-MS-0808-8984

FCL70004010

LCD MYLAR L70L-E(FCL70004,REV3A)GP

152C-00004422

25LAVPLC008

LAVP LCD COVER ASSY GP

153#N/A

35LAVPLC008

LAVP LCD COVER SUB ASSY GP

154#N/A

26LAVPSA009

LAVP STAND ASSY GP

155C-00004355

37LAVPSU003

LAVP STAND SUB ASSY GP

156C-00004356

38LAVPBS002

LAVP BASE SUB ASSY GP

1

BOM LIST (VP2130b-1)

Viewsonic Corporation 63 VP2130b-1 Confidential - Do Not Copy

Item

ViewSonic P/N

Ref. P/N

Description

Location

Universal number#

Q'ty

57

M-SCW-0824-0795

MM40080BCI5

SCREW M4.0*8-B(NI,NYLOK)GP

858#N/A

27LAVPCS007

LAVP CHASSIS ASSY GP

1

59 #N/A EALAVP03011

STAND VISA COVER

LAVP(EALAVP03,REV3A)GP

1

60

M-SCW-0824-0814

MM30060BBJ3

SCREW M3.0*6,B(NI) GP

4

61 #N/A 2ALAVPPTS07

LAVP PANEL DEPENDENT KIT ASSY(SASN)

GP162

E-00004426

AAM213U6008

LCD 21" LTM213U6-L01(1600*1200,UXGA)GP

1

63 #N/A AZLAVP0S009

LAVP SW BIOS IMAGE(SASN)GM1601-LF-CF

N/A

1

64 B-00004352 AS023190407

INV

MODULE(SEL)LAVP(20V,V=900V,MAX)GP

1

65

#N/A

28LAVPPK004

LAVP PACKING ASSY GP

166CB-00004361

DDWCVPDV019

CABLE DVI-I(29/29P,1.8M)WCVP GP

1

67 CB-00004360 DD0M7TPC005

CABLE ASSY M7T MB-VGA(15/15P,REV1A)

GP168

P-00004159

HAL0T002019

PE BAG L0T(HAL0T002,REV3A)GP

169P-00004429

HBLAVP01010

END CAP-L LAVP(HBLAVP01,REV3A)GP

170P-00004430

HBLAVP02016

END CAP-R LAVP(HBLAVP02,REV3A)GP

171M-LB-0813-0747

HCL7V004013

CORE LABEL(HCL7V004,REV3A)

172#N/A

HCLAVP01011

ID LABEL LAVP(HCLAVP01,REV3A)GP

173M-LB-0813-0745

HCL7V002011

SERIAL LEBAL L7V(HCL7V002,REV3A) GP

1

74 M-LB-0813-1042 HCL7V019011 CARTON LABEL L7VC(HCL7V019,REV3B) GP 1

75

P-00004428

HFLAVP01013

CARTON LAVP(HFLAVP01,REV3A)GP

176DC-00004425

HGLAVP01014

CD+QSG LAVP(HGLAVP01,REV3A)GP

177#N/A

JXLM5003011

HANDLE LM5S(JXLM5003,REV 3B) GP

178M-00004427

JXLAVP01011

LCD FILM LAVP(JXLAVP01,REV3A)GP

179M-LB-0813-1043

HCL70021011

HI-POT LABEL L70L(HCL70021,REV3A)

180#N/A

HFL0VP02017

SPACE PLATE L0VP(HFL0VP02,REV3A)GP

0.083

81 #N/A HDL7VC01019 SERVICR PAPER L7VC(HDL7VC01,REV3A) GP 1

82

DC-00003536

HCL9V009011

HG LABEL L9VD(HCL9V009,REV3A)

1

83 A-PC-0106-0224 DM333181G97

POWER CORD 3P 1.8M(USA)V04VS350012180

GP

1

Viewsonic Corporation 64 VP2130b-1 Confidential - Do Not Copy

8.Exploded Diagram and Exploded Parts List

Model

Title
Date Rev:

ViewSonic Corporation

Viewsonic Corporation 65

VP2130b-1

Confidential - Do Not Copy

Confidential - Do Not Copy

Viewsonic Corporation 66 VP2130b-1

Cable connection diagram

CN2

CN1

CN3

Inv./B

CN5

CN4

CN1
CN2

Power board

Button board CN1

PANEL LVDS

CN4 CN5

Main board CN3

USB board

CN6 CN1

FFC cable

To panel

32

33

34

Confidential - Do Not Copy

ViewSonic Model Number: VS10773-1W
Rev: 1a

Serial No. Prefix: PSD

Item

ViewSonic P/N

Ref. P/N

Description

Q'ty

1 #N/A

34LAVPLB001E LAVP BEZEL SUB ASSY

1

2 #N/A

EALAVP01019 LCD BEZEL L0VP

1

3 #N/A

ECL0VP01011 CONTROL BUTTON LAVP

1

4 #N/A

EBLAVP01010 LED LENS LAVP

1

5 #N/A

FALAVP01019 PCB SHILED LAVP

1

6 #N/A

FALAVP02015 INVER SHIELD LAVP

1

7 #N/A

FALAVP03011 LCD BRACKET-R

1

8 #N/A

FALAVP04018 LCD BRACKET-L

1

9 #N/A

FALAVP05014 LCD BRACKET BOTTOM LAVP

1

10 #N/A

FCLAVP01011 INVERTER MYLAR LAVP

1

11 M-SCW-0824-0728

MM30050IBJ3 SCREW M3.0*5.0-I(NI)

25

12 C-00004422

25LAVPLC008 LAVP LCD COVER ASSY

1

13 #N/A

EALAVP02015 LCD COVER LAVP

1

14 C-00004642

EALAVP03011 STAND VESA COVER LAVP

1

15 M-MS-0808-9411

FBL70008014 LOCK METAL L70B

1

16 M-SCW-0824-0814

MM30060BBJ3 SCREW M3*6-B (NI)

4

17 #N/A

26LAVPSA009 LAVP STAND ASSY

1

18 #N/A

FALAVP07017 HINGE ASSY LAVP

1

19 #N/A

EALAVP04018 STAND TOP LAVP

1

20 #N/A

EALAVP05014 STAND BOTTOM LAVP

1

21 #N/A

EALAVP06011 HINGE COVER FRONT

1

22 #N/A

EALAVP07017 HINGE COBER BACK LAVP

1

23 #N/A

EBLAVP02016 CLAMP LAVP

3

24 M-SCW-0824-0795

MM40080BCI5 SCREW M4.0*8-B(NI, NYLOK)

8

25 M-SCW-0824-0725

MF30050IBJ6 SCREW F3*5-I(NI)

15

26 #N/A

EALAVP08013 BASE LAVP

1

27 #N/A

FALAVP06011 BASE PLATE LAVP

1

28 #N/A

GALAVP01019 RUBBER FOOT LAVP

4

29 M-MS-0808-8986

MBLI1004018 IO NUT

4

30 #N/A

FALAVP08013 LCD BRACKET TOP

1

31 #N/A

MS30030I934 SCREW 3*3.0-I

4

32 CB-00004357

DEFC3609000 FFC CABLE MB-BUTTON

1

33 CB-00004358

DDLAVPPB104 CABLE POWER-MB

1

34 CB-00004424

DDLAVPLC104 CABLE MB-LCD

1

35 E-00004426

AAM213U6008 LCD LTM213U6-L01

1

36 B-00004352

AS023190407 INV MODULE(SEL)LAVP

1

37 B-00004348

AS08B500000 PWR MODULE(DTA)EADP-64BF B

1

38 B-00004349

21LAVPMB003 LAVP M/B ASSY

1

39

B-00004351

22L0VPUB005

L0VP USB/B ASSY(GP)

1

EXPLODED PARTS LIST (VP2130b-1)

Viewsonic Corporation 67 VP2130b-1 Confidential - Do Not Copy

ViewSonic Model Number: VS10773-1W
Rev: 1b

Serial No. Prefix: PSD

Item

ViewSonic P/N

Ref. P/N

Description

Q'ty

1 CB-00004361 DDWCVPDV019 DVI cable 1
2 A-PC-0106-0224 DM333181G97 POWER CORD 3P 1.8M 1
3 CB-00004360 DD0M7TPC005 VGA CABLE 1
4 P-00004159 HAL0T002019 PE bag 1
5 P-00004429 HBLAVP01010 END CAP -L 1
6 #N/A HBLAVP01016 END CAP R 1
7 M-LB-0813-0747 HCL7V004013 Core label 1
8 #N/A HCLAVP01011 ID label 1

9 M-LB-0813-0745 HCL7V002011 S/N label 1
10 M-LB-0813-1042 HCL7V019011 Carton label 1
11 P-00004428 HFLAVP01013 Carton 1
12 DC-00004425 HGLAVP01014 CD+QSG 1
13 #N/A JXLM5003011 Handle 1
14 M-00004427 JXLAVP01011 LCD film 1

15

#N/A

HFL0VP02017

Space Plate

1

PACKING PART LIST ( VP2130b-1 )

Viewsonic Corporation 68 VP2130b-1

Confidential - Do Not Copy

Analog

RGB

RGB

DVI

HS VS

74HCT4053

HS

VS

HS

VS

DSCL

DSDA

ASCL

ASDA

24LC02

24LC02

Triple ADC

Interface

74HCT4053

SCL

SDA

74HCT4053

74HCT4053

SCL

SDA

SCL

SDARXTX

DVI

Interface

RX0- ~RX2-

RX0+ ~RX2+

DVI_R

DVI_G

DVI_B

RXC+

RXC-

PANEL

20,21,23

LVDS+,LVDS-

CLK+

CLK-

BACKLIGHT

K4D263238G-VC33

FSDATA,FSADDR

RESET

SST39VF040

FSCLK+

FSCLK-

OCMADDR,OCMDATA

BACKLIGHT

AC IN 110V~264V

PANEL ON/OFF

BRIGHTNESS

DC OUT

+12V

+20V

POWER BLOCK

+12V

+5V

AIC1577 ADJ

+3.3V

+2.5V

+1.8V

AIC1084

LT1117

AIC1084

+5V

+5V

+5V

+5V

+5V

+5V

+3.3V +2.5V +1.8V

+3.3V

+3.3V

+3.3V

KEYPAD

GM1601

9. Block Diagram

Viewsonic Corporation 69 VP2130b-1 Confidential - Do Not Copy

GM1601M/B BLOCK

DVI_I

CN2

D_SUB

CN1

GM1601H_CF

U21

DDR

U13

POWER

U11

FLASH

KEYPAD

CN3

POWER_IN

CN10

LVDS

CN7

CN6

PIN1

PIN1

PIN1

PIN2

PIN1

PIN3

PIN2

PIN4

1243

U19

10. Schematic Diagrams

Viewsonic Corporation 70 VP2130b-1 Confidential - Do Not Copy

Model

Title

Date Rev:

ViewSonic Corporation

INPUT

DVI CONNECTOR

Swap Pin 2 & Pin12

VGA_RED+

VGA_GREEN+

RED

VGA_BLUE+

DVISCL

RX0+

RX1+

RXC+

RX0-

RX2+

RX1-

RX2-

RXC-

DVISDA

DVI_BLUE+

DVI_HS

RX1-RX2+ RX2-RXC- RX1+

RXC+ RX0-

RX0+

DVI_SCL

DVISCL

DVI_HS

DVI_VS

BLUE

DVI_RED+

DVI_GREEN+

DVI_BLUE+

GREEN

VGA_BLUE+ VGA_GREEN+ VGA_RED+

VGASCL

DVI_BLUE+ DVI_RED+DVI_GREEN+

DSCL
ASCL

DSDA
ASDA

VGA_BLUE+

VGA_SCL

VGA_HS

VGASCL

VGASDA

VGA_VS

VGA_SDA

VGA_SCL
VGA_SDA

TXD

RXD

DDC_SDA

DDC_SCL

HS

VGA_SDA

DDC_SCL

VGA_HS

VGA_SCL

DVI_HS

DDC_SDA

VGA_VS

DVI_VS

DSDA

DDCD_5V

DSCL

DSDA

DSCL

DVISDA

A/D_SEL

VS

HS

ASCL
ASDA

VS

VGA_HS VGA_VS

DVI_RED+

DVI_BLUE+

DVI_GREEN+

DVI_GREEN+

DVI_RED+

A/D_SEL

VGASDA

DVI_SDA

DVI_SCL

VGA_BLUE+

VGA_RED+

VGA_GREEN+

VGA_RED+

VGA_GREEN+

DVI_VS

DVI_SDA

DDCD_5V

DDCD_5V

DVI_VS

VGA_VS

DVI_HS

VGA_HS

DVI_VS_C

VGA_VS_C

DVI_HS_C

VGA_HS_C

RXC- 5

DVI_CAB 5

RX1- 5

RX2+ 5

RX0+ 5

RXC+ 5

RX0- 5

RX1+ 5

RX2- 5

DEBUG 5

DDC_SDA 5

DDC_SCL 5

AHS 5

AVS 5

DSDA_1 5

DSCL_1 5

RED 5

BLUE 5

GREEN 5
SOG 5

A/D_SEL 5

VGA_CAB 5

EDID_SEL 5

RXD 5

TXD 5

DVI_5V

+5V +5V

+5V

+5V

+5V

+5V

+5V

+5V+5V

+5V +5V

+5V

+5V

+5V

+5V

+5V

+5V

+5V

+5V

+5VDVI_5V

VGA_5V

VGA_5V

+5V

+3.3V

+3.3V

+3.3V

+5V

+5V

+5V

+5V

+5V

+5V

R284.7K

D17
DAN217K/NC

12

3

C40.1u

L19

BK2125HS102/8

C213

33P

C212

33P

R3 0R(NC)

C18 0.1u

R294.7K

R43 0R

R211 0R
R212 0R

R213 0R
R214 0R

C220.1u

12

3

D1
DAN217K/NC

12

3

U7D
74LCX14MX/NC

9 8

147

C230.1u

R52 22R

D9
DAN217K/NC

12

3

R4910K

R6375R

R223.3K

R10 0R(NC)

R1 0R(NC)

R46 0R(NC)

C270.1u

R11 0R(NC)

R1510K

D18
DAN217K/NC

12

3

C13 0.1u

R58 20R

R13 0R(NC)

R14
0R

R1610K

C26

0.1u

D2
DAN217K/NC

12

3

R213.3K

R53 22R

L22

BK2125HS102/8

R187
100K

D10
DAN217K/NC

12

3

R48 0R(NC)

D12
DAN217K/NC

12

3

U1 AD8186

3

1

8

4

7

5
6

24

2

9
10
11
12

23
22
21
20

13

14

15

16

17

18

19

IN1A

IN0A

IN2B

VREF

VEE

IN2A
VCC

VCC

DGND

VEE
IN1B
VEE
IN0B

OE

SEL A/B

VCC

OUT 0

VCC

DVCC

VEE

OUT 2

VCC

OUT 1

VEE

R2675R

R3175R

R3275R

R61 20R

R42 0R(NC)

D23
DAN217K/NC

12

3

D24
DAN217K/NC

12

3

C170.1u

U7B
74LCX14MX/NC

3 4

147

D19
DAN217K/NC

12

3

R20810K

R20910K

U2 24AA02

4

81
2
3

7

6

5

GND

VCCA0

A1A2WP

SCL
SDA

U7C
74LCX14MX/NC

5 6

147

C19522p/NC

C19622p/NC

C19722p/NC

C19822p/NC

D3
DAN217K/NC

12

3

R24 0R

R35 22R

R43.3K

R57
100K

D13
DAN217K/NC

12

3

U22

74HCT4053

12
13

2
1

5
3

6
11
10

9

14
15

4

16

8

7

X0
X1

Y0
Y1

Z0
Z1

INH
A
B
C

X
Y

Z

VCC

GND

VEE

CN1

DB15 HD

1
6

2
7

3
8

4
9

5

11

12

13

14

15

10

R185 0R(NC)

R184 0R(NC)

C250.1u

R3410K

R203.3K

D21
DAN217K/NC

12

3

L27

BK2125HS102/8

C647uF/6.3V

R25
100K(NC)

R3310K

C190 22u

C192 22u

L21

BK2125HS102/8

L24

BK2125HS102/8

CN2

DVI-I

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

17
18
19
20
21
22
23
24

C1
C2
C3
C4
C5

RX2-

RX2+

GND
RX4-

RX4+

SCL

SDA

VS

RX1-

RX1+

GND
RX3-

RX3+

5V

GND

HP

RX0-

RX0+

GND
RX5-

RX5+

GND

RXC+

RXC-

26

25

RED
GRN

BLU

HS

GND

D14
DAN217K/NC

12

3

R60

510R

C191 22u

L31

BK2125HS102/8/NC

C9 0.1u

R63.3K

R6275R

C193 22u

C194 22u

U6

24AA02

4

81
2
3

7

6

5

GND

VCCA0

A1A2WP

SCL
SDA

R65

510R

D20
DAN217K/NC

12

3

D6
DAN217K/NC

12

3

U5

74HCT4053

12
13

2
1

5
3

6
11
10
9

14
15

4

16

8

7

X0
X1

Y0
Y1

Z0
Z1

INH

A
B
C

X
Y

Z

VCC

GND

VEE

R37 0R(NC)

R54 10K

R55
0R

C70.1u

R47

100K

D15
DAN217K/NC

12

3

U7A
74LCX14MX/NC

1 2

147

R18610K(NC)

R45 100R

C240.1u

R56

100K

D22
DAN217K/NC

12

3

C2

0.1u

D11
DAN217K/NC

12

3

D7
DAN217K/NC

12

3

R21510K

R59
0R

12

3

R210 10K

R1210K

R51 10K

R23
100R

C1

0.1u

R4010K

R3910K

R1775R/NC

R30
100R

R53.3K

R182 0R

C11 0.1u

R6475R

C80.01u

R2 0R(NC)

R36 22R

D16
DAN217K/NC

12

3

R38 0R(NC)

R1875R/NC

U4

24AA02

4

81
2
3

7

6

5

GND

VCCA0

A1A2WP

SCL
SDA

R183 0R

R74.7K

C189 22u

R41 0R(NC)

R84.7K

R1975R/NC

D8
DAN217K/NC

12

3

C5

47uF/6.3V

C14 0.1u

R94.7K

U3

74HCT4053

12
13

2
1

5
3

6
11
10
9

14
15

4

16

8

7

X0
X1

Y0
Y1

Z0
Z1

INH

A
B
C

X
Y

Z

VCC

GND

VEE

R44 100R

R274.7K

C20 0.1u

R5010K

L33

BK2125HS102/8/NC

L34

BK2125HS102/8/NC

C30.1u

Viewsonic Corporation 71 VP2130b-1

Confidential - Do Not Copy

BOOTSTRAP HEADER
OPEN=1
SHUNTED=0

17: LOW (8bit bus with OCM access external ROM)

13: LOW(disable serial interface debug)
14: LOW

18: HIGH

16: HIGH (use crystal)

15: LOW

12: LOW

Socket for a X8 Flash (64/128/256/512K) and
PROMJETmemory Emulator

19: LOW

10: LOW (Use TCLK)
11: LOW (set all display output to '0')

231

8-BIT_FLASH3

8-BIT_FLASH1

8-BIT_FLASH2

INT_OSC

Serial_Interface_Debug3

Serial_Interface_Debug2

Serial_Interface_Debug1

OUTPUTS_ZERO

OUTPUTS_ZERO

OSCSEL

Custom2

Custom1

1AM

3

MMBT3904L

2

Component
top view

1

+3.3V_DVI

+3.3V_PLL

FSCKE

+3.3V_LVDSB

/FSCAS

/FSWE

/FSCASU

+3.3V_PLL

+1.8V_CORE

+3.3V_LVDS

FSADDR6

FSADDR0

FSADDR7

FSADDR4

FSADDR2

FSADDR3

FSADDR5

FSADDR1

FSADDR11

FSADDR9

FSADDR8

FSADDR10

/OCM_WE

/OCM_CS
/OCM_RE

OCMADDR12

OCMADDR13

OCMADDR15

OCMADDR14

OCMADDR19

OCMADDR9

OCMADDR17

OCMADDR10

OCMADDR11

OCMADDR8

+3.3V

MSTR_SCL

+3.3V_ADC

FSADDRU10

OCMDATA6

FSADDRU0

+3.3V_ADC

TXA1+

YUV5

/OCM_RE

OCMADDR4

OCMDATA4

OCMDATA[0..7]

FSADDRU5

+1.8V_ADC

+1.8V_ADC

FSVREF1

+1.8V_DVI

FS_2.5

TXA2-

LED_R

Y24

YUV0

OCMADDR10

OCMDATA3

FSADDRU6

TXB2-

TXBC-

PAB2

C20

OCMADDR3

OEXTR

OCMDATA7

OCMDATA4

VGA_CAB

TXB0-

TXB0+

TXB1+

+3.3V_LBADC

OCMADDR6
OCMADDR5

OCMDATA7

YUV6

YUV2

OCMADDR13

FSADDRU8

TXB3-

TXAC+

PAB1

C24

Y23

OCMADDR14

OCMDATA6
OCMDATA5

OCMADDR18

OCMADDR16

DVI_CAB

+3.3V_LVDSA

TXA1-

PAB0

C23

Y20

VCLK

OCMDATA5

OCMDATA1
OCMDATA0

MSTR_SDA

TXA2+

SVHSYNC

YUV1

OCMDATA3

FSADDRU2

+3.3V_DVI

PBIAS

PAB3

C26

SVODD

YUV3

OCMADDR7

OCMDATA2

FSADDRU11

TXB1-

PAB6

SVDV

OCMADDR18

OCMADDR16

OCMADDR9

FSADDRU9

TXAC-

BRIGHTNESS

C21

OCMADDR15

+3.3V_DIG

PPWR

TXA0-

TXA0+

C22

Y27

Y26

Y21

YUV4

OCMADDR12

OCMADDR1
OCMADDR0

OCMDATA1

VODD

FSADDRU7

FSADDRU4

FS_2.5

PAB4

/OCM_WE

OCMADDR19

OCMADDR17

OCMADDR8

OCMADDR2

FSADDRU3

+3.3V_DIG

TXA3+

C27

C25

+3.3V_PLL

TXBC+

TXA3-

Y25

YUV7

OCMADDR11

VDV

FSADDRU[0..11]

+3.3V_LBADC

FSVREF1

+3.3V_DVI

+3.3V_PLL

+3.3V_LVDS

Y22

OCMDATA0

OCMDATA2

FSADDRU1

+3.3V_LVDSA

+1.8V_CORE

TXB2+

TXB3+

PAB5

+3.3V_LVDSB

SVVSYNC

/OCM_CS

IRDATA

VVS
VHS_CSYNC

MSTR_SDA

MSTR_SCL

PAB7

VCLAMP

SVCLK

LED_G

ADC_IN1

ADC_IN2

TXA2-

TXB2-

TXB2+
TXBC+

TXA2+

TXA1+

TXA0-

TXBC-

TXB1+

TXB3-

TXB1-

Panel_Power

TXA1-

TXA0+

TXAC+

TXB0+

TXB3+

TXA3-

TXAC-

TXB0-

TXA3+

UP

SEL
PWR

LEFT

DOWN

MENU

RIGHT

LED_G

LED_R

MENU
SEL
PWR
DOWN
UP
RIGHT
LEFT

ADC_IN3

+1.8V_DVI

FSBKSELU1

FSBKSELU0

FSCKEU

FSDQMU0
FSDQMU1
FSDQMU2
FSDQMU3

FSCLKU+
FSCLKU-

FSADDRU0

FSADDRU10

FSADDRU6

FSADDRU11

FSADDRU5

FSADDRU3

FSADDRU9

FSADDRU4

FSADDRU8

FSADDRU7

FSADDRU2

FSADDRU1

/FSCASU

/FSWEU

/FSRASU

FSDQSU1

FSDQSU0

FSDQSU3

FSDQSU2

/FSRAS

FSBKSEL1

/FSWEU

FSBKSELU1

/FSRASU

FSCKEU

FSBKSEL0

FSBKSELU0

FSDQSU1

FSDQM0

FSDQS0

FSDQMU0
FSDQSU0 FSDQS1

FSDQM1

FSDQMU1

FSDQMU2

FSDATA20

FSDATA13

FSDATA8

FSDATA5

FSDATA1

FSDATA21

FSDATA7

FSDATA3

FSDQM2

FSDATA22

FSDATA15

FSDATA26

FSDATA25

FSDATA11

FSDATA0

FSDATA27

FSDATA23

FSDATA2

FSDATA4

FSDATA19

FSDATA14

FSDATA10
FSDATA9

FSDATA18

FSDATA24

FSDATA12

FSDATA6

FSDQSU2

FSDQS2

FSDATAU22

FSDATAU11

FSDATAU21

FSDATAU31

FSDATAU18

FSDATAU1

FSDATAU14

FSDATAU30

FSDATAU30

FSDATAU3

FSDATAU7

FSDATAU1

FSDATAU[0..31]

FSDATAU21

FSDATAU8

FSDATAU5

FSDATAU5

FSDATAU13

FSDATAU0

FSDATAU12

FSDATAU19

FSDATAU31

FSDATAU19

FSDATAU17

FSDATAU15

FSDATAU20

FSDATAU7

FSDATAU9

FSDATAU23

FSDATAU2

FSDATAU8

FSDATAU6

FSDATAU13

FSDATAU27

FSDATAU0

FSDATAU10

FSDATAU10

FSDATAU9

FSDATAU2

FSDATAU4

FSDATAU28

FSDATAU12

FSDATAU16

FSDATAU22

FSDATAU18

FSDATAU14

FSDATAU4

FSDATAU28

FSDATAU24

FSDATAU15

FSDATAU25

FSDATAU23

FSDATAU11

FSDATAU29

FSDATAU29

FSDATAU6

FSDATAU20

FSDATAU3

FSDATAU26

FSDATA30

FSDATAU24

FSDATAU17

FSDATA31

FSDQSU3
FSDQMU3

FSDATAU26

FSDATAU25

FSDQS3
FSDQM3

FSDATAU27

FSDATAU16

FSDATA17

FSDATA16

FSDATA29

FSDATA28

RX0+4

RXC-4

RX2+4

RX0-4

DSCL_14

RX1-4

DSDA_14

RX1+4

RX2-4
RXC+4

SOG4

GREEN4

DDC_SDA4

BLUE4

RED4

DDC_SCL4

AHS4
AVS4

VGA_CAB 4
DVI_CAB 4

/FSCAS 6

FSADDR[0..11] 6

FSDATA[0..31] 6

PPWR 7
PBIAS 7

TXD4

RXD4

BRIGHTNESS7

A/D_SEL4

EDID_SEL4

DEBUG4

FSCLK+ 6
FSCLK- 6

/FSWE 6
FSCKE 6

/FSRAS 6

FSBKSEL1 6

FSBKSEL0 6

FSDQM1 6
FSDQS1 6

FSDQS0 6
FSDQM0 6

FSDQM2 6
FSDQS2 6

FSDQS3 6
FSDQM3 6

INVSW7

SWITCH7

USB_CTRL

6

+1.8V_CORE

+1.8V_CORE

+3.3V_DIG

FS_2.5

+3.3V_LVDSB

+3.3V_LVDSA

+3.3V_LVDS

FSVREF1

+1.8V_DVI

+3.3V_DVI

+1.8V_ADC

+3.3V_ADC

+3.3V_PLL

+3.3V_DVI

+3.3V_PLL +3.3V_PLL

+5V

FSVREF1

+3.3V_LVDS

+3.3V_LVDSA

+3.3V_LVDSB

+3.3V_LBADC

+1.8V

+3.3V +3.3V_DIG

+3.3V_LBADC+3.3V

+2.5V FS_2.5

+3.3V

+3.3V

+3.3V

FSVREF

+1.8V

+1.8V_DVI

+3.3V +3.3V_DVI

+1.8V_ADC

+1.8V

+3.3V

+3.3V

+3.3V

+3.3V

+3.3V+3.3V

+3.3V

+3.3V_ADC

+3.3V_PLL

+3.3V

+5V

+3.3V

+3.3V

+3.3V

Panel_Power

+3.3V

+3.3V

+3.3V

+3.3V

+3.3V

C550.1u

CN4

GPROBE

4606-04-04P-R

1
2
3
4

R119 0R(NC)

C580.1u

R94 33K

C2947uF/6.3V

C830.1u

R76 0R

R93 0R

R146 0R(NC)

C690.1u

RN8

33R

18
27
36
45

R102 1K

C112 0.1u

C600.1u

C520.1u

C1330.1u

L5
CX000800000

R142 0R

RN3

33R

18
27
36
45

C1290.1u

C900.1u

C560.1u

C6447uF/6.3V

C4747uF/6.3V

Gm1601

LCD TV / MONITOR CONTROLLER

U21

GM1601

BGA416-26X26_1_27

A20
B20
C20
D19
D20

AF17
AD16

AC16

AC17

AC7

Y26

Y25

W26

J26

N26
U25

F26

AD4

AF3

AE3

AD3

AF2

AE2

AD2

AF1

AE1

AD1

AC1

AC2

AC3

AB1

AB2

AB3

AA1

AA2

AA3

Y1

Y2

Y3

W1

W2

W3

V1

V2

V3

V4

U1

U2

U3

U4

T1

T2

T3

T4

P1

P2

L2

L1

R1

R2

R3

K1

L4
L3

N2
N1

N4
N3

M4
M3

M2

M1

P4
P3

R4

AD25
AD26
AC24
AC25
AB26
AA24
AA25
AA26
Y24
AB25
AC26
AB24

E24
E25
E26
F24
G23
G24
G25
G26
R24
P26
P25
P24
N24
N23
M26
M25
R25
R26
T24
T25
U26
V24
V25
V26
M24
L26
L25
L24
J25
H26
H25
H24

N25
T26
K24

F25

U24
U23

C16
B16
A16
D15
C15
B15
A15
D14

A14
B14
C14
D16

A17

C19
B19
A19
D18
C18
B18
A18
C17

A23
C22
B22
A22
D21
C21
B21
A21

B25
A25
D24
C24
B24
A24
C23
B23

C26
C25
D26
D25

D5
C5

B6

A6

B10

A10

A9
B9

A8
B8

B11

C12

B12

A12

A1

B1
B2
C1
C2
D1
D2
C3

F1

G3

G4

K3
K2

AC18
AD18
AE18
AF18
AE19
AF19
AE20
AF20

AD21

AE21
AF21

AD22

AE22
AF22
AE23
AF23

AD23
AD24
AE24
AF24
AF25
AF26
AE25
AE26

AD15

AD8
AF7
AE7
AF6
AE6
AD6
AF5
AE5

AD7

AD5
AC5
AF4
AE4

K17

U17

U11

L16

T16

T17

L11

K10

K16

T11

U16

U10

K11

U14

L15

M15

P15

R15

U15

M11

N11

R11

P16

N17

N10

R10

K12

L12

M13

M12

N12

P12

T12

U12

L13

N13

R13

L10

T13

T10

K14

L14

N14

P14

AC4

AC6

AC8

AC10

E23

D22

AA4W4AB4

Y4

T14

K15

N15

T15

M16

N16

R16

R12

K13

P13

U13

M14

R14

H23

J23

M23

P23

L23

T23

V23

R23

Y23

AA23

AB23

AC23

W23

F23

P11

M10

M17

P17

R17

P10

L17

AC12

AD12

AD13

AD20

AC22

AC21

AC13

AC14

AC15

AC19

AC20

AD19

AD17

AE17

A26
B26

J24

W25

K25

K23

K26

W24A5A7B7C7D7A11

A3

A4D6C6C8C9

C10D8D9

D10

C11

C13

D13

E1E2C4E4D4

A2B3D3E3F4F2G1H3H1J3J1

F3G2H4H2J4J2K4

AE8
AF8
AC9
AD9
AE9
AF9
AD10
AE10

AF10
AC11
AD11
AE11
AF11
AF12
AE12
AF13

AE13

AF14
AE14

AD14

AF15
AE15
AF16
AE16

B17

B5

D11

D12

A13

B13

D17

D23

B4

VCLK
VODD
VVS
VHS_CSYNC
VDV

GPIO_14
GPIO_15

OEXTR

NO_CONNECT

DCLK

FSBKSEL1

FSBKSEL0

FSCKE

DQS3

DQS1
DQS2

DM0

OCMDATA0

OCMDATA1

OCMDATA2

OCMDATA3

OCMDATA4

OCMDATA5

OCMDATA6

OCMDATA7

OCMDATA8

OCMDATA9

OCMDATA10

OCMDATA11

OCMDATA12

OCMDATA13

OCMDATA14

OCMDATA15

OCMADDR0

OCMADDR1

OCMADDR2

OCMADDR3

OCMADDR4

OCMADDR5

OCMADDR6

OCMADDR7

OCMADDR8

OCMADDR9

OCMADDR10

OCMADDR11

OCMADDR12

OCMADDR13

OCMADDR14

OCMADDR15

OCMADDR16

OCMADDR17

OCMADDR18

OCMADDR19

/OCM_CS0

/OCM_CS1

/OCM_CS2

/OCM_INT1

/OCM_INT2

/ROM_CS

/OCM_RE

/OCM_WE

/RESET

AHSYNC
AVSYNC

VGA_SCL
VGA_SDA

DVI_SCL
DVI_SDA

IR1
IR0

OCM_UDI

OCM_UDO

MSTR_SCL
MSTR_SDA

EXTCLK

FSADDR0
FSADDR1
FSADDR2
FSADDR3
FSADDR4
FSADDR5
FSADDR6
FSADDR7
FSADDR8

FSADDR9
FSADDR10
FSADDR11

FSDATA0

FSDATA1

FSDATA2

FSDATA3

FSDATA4

FSDATA5

FSDATA6

FSDATA7

FSDATA8

FSDATA9
FSDATA10
FSDATA11
FSDATA12
FSDATA13
FSDATA14
FSDATA15
FSDATA16
FSDATA17
FSDATA18
FSDATA19
FSDATA20
FSDATA21
FSDATA22
FSDATA23
FSDATA24
FSDATA25
FSDATA26
FSDATA27
FSDATA28
FSDATA29
FSDATA30
FSDATA31

DM1
DM2
DM3

DQS0

FSCLKp
FSCLKn

SVDATA0
SVDATA1
SVDATA2
SVDATA3
SVDATA4
SVDATA5
SVDATA6
SVDATA7

SVODD
SVVSYNC
SVHSYNC
SVCLK

SVDV

VRED0
VRED1
VRED2
VRED3
VRED4
VRED5
VRED6
VRED7

VGRN0
VGRN1
VGRN2
VGRN3
VGRN4
VGRN5
VGRN6
VGRN7

VBLU0
VBLU1
VBLU2
VBLU3
VBLU4
VBLU5
VBLU6
VBLU7

PWM0
PWM1
PWM2
OCM_TIMER1

NO_CONNECT
NO_CONNECT

RXC-

RXC+

RX2-

RX2+

RX1+
RX1-

RX0+
RX0-

REXT

LBADC_IN1

LBADC_IN2

LBADC_IN3

NO_CONNECT

BLUE­BLUE+
GREEN­GREEN+
RED­RED+
SOG

NO_CONNECT

TCLK

XTAL

NO_CONNECT
ACS_RSET_HD

GPIO_G06_B0
GPIO_G06_B1
GPIO_G06_B2
GPIO_G06_B3

A3+

A3­AC+
AC-

GPIO_G05_B0

A2+

A2-

GPIO_G05_B3

A1+

A1­A0+

A0-

GPIO_G04_B0
GPIO_G04_B1
GPIO_G04_B2
GPIO_G04_B3
GPIO_G04_B4
GPIO_G04_B5
GPIO_G04_B6
GPIO_G04_B7

D_GND

GPIO_G08_B5/JTAG_RESET

GPIO_G08_B4/JTAG_TDO

GPIO_G08_B3

GPIO_G08_B2/JTAG_TDI

GPIO_G08_B1/JTAG_MODE

GPIO_G08_B0/JTAG_CLK

GPIO_G09_B5
GPIO_G09_B4

GPIO_16

GPIO_G09_B3
GPIO_G09_B2
GPIO_G09_B1
GPIO_G09_B0

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

CORE_1.8

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

IO_3.3

IO_3.3

IO_3.3

IO_3.3

FS_2.5

IO_3.3

IO_3.3

IO_3.3

IO_3.3

IO_3.3

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

FS_2.5

FS_2.5

FS_2.5

FS_2.5

FS_2.5

/FSALTWE

FS_2.5

FS_2.5

/FSALTCAS

FS_2.5

FS_2.5

/FSALTRAS

FS_2.5

FS_2.5

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

D_GND

LVDSB_3.3

LVDSB_3.3

LVDSB_3.3

LVDSA_3.3

LVDSA_3.3

LVDSA_3.3

LVDSB_GND

LVDSB_GND

LVDSB_GND

VSSA33A_LVDS

VSSA33A_LVDS

VSSA33A_LVDS

VSSD33_LVDS

VDDD33_LVDS

PPWR
PBIAS

FSVREF

FSVREF

VSSA18_DLL

VDDA18_DLL

FSVREFVSS

FSVREFVSS

ADC_DGND

DVI_GND

DVI_GND

DVI_GND

DVI_GND

DVI_GND

ADC_1.8

ADC_1.8

DVI_1.8

DVI_3.3

DVI_3.3

DVI_3.3

DVI_3.3

DVI_1.8

DVI_1.8

DVI_1.8

DVI_3.3

LBACD-33

LBADC_GND

ADC_AGND

ADC_AGND

ADC_AGND

ADC_AGND

ADC_AGND

ADC_3.3

ADC_3.3

ADC_3.3

ADC_3.3

VDDA33_RPLL

VDDA33_PLL

VDDA33_FPLL

VDDA33_SDDS

VDDA33_SDDS

VDDA33_DDDS

VDDA33_DDDS

VSSA33_RPLL

VSSD33_PLL

VSSA33_FPLL

VSSA33_SDDS

VSSD33_SDDS

VSSA33_DDDS

VSSD33_DDDS

GPIO_G07_B0
GPIO_G07_B1
GPIO_G07_B2
GPIO_G07_B3
GPIO_G07_B4
GPIO_G07_B5
GPIO_G07_B6
GPIO_G07_B7

LVDS_SHIELD[0]
LVDS_SHIELD[1]
LVDS_SHIELD[2]
LVDS_SHIELD[3]

B3+

B3­BC+
BC-

LVDS_SHIELD[4]

B2+

B2-

LVDS_SHIELD[5]

B1+

B1­B0+

B0-

VCLAMP

DVI_GND

DVI_GND

LBADC_RETURN

D_GND

D_GND

IO_3.3

IO_3.3

ADC_DGND

C310.1u

R101 1K

R129 0R

C7647uF/6.3V

C670.1u

C1080.1u

R143 0R(NC)

C510.1u

R125 2.7K

U11 29LV040B

A28F001

3
29
28
4
25
23
26
27
5
6
7
8
9
10
11
12

21
20
19
18
17
15
14
13

22
24
31

32

1

16

30
2

A15
A14
A13
A12
A11
A10

A9
A8
A7
A6
A5
A4
A3
A2
A1
A0

DQ7
DQ6
DQ5
DQ4
DQ3
DQ2
DQ1
DQ0

CE#
OE#
WE#

VCC

A18

VSS

A17
A16

RN6

33R

18
27
36
45

Q1

MMST3906

C820.1u

RN11

33R

18
27
36
45

RN13

33R

18
27
36
45

C1100.1u

C360.1u

R121 0R(NC)

L11
CX000800000

C75 0.01u

C4447uF/6.3V

C860.1u

C4647uF/6.3V

R99 1K

R10310K

R72 100R

C780.1u

R73 470R

R108

0R

C490.1u

L12
CX000800000

C115 0.1u

R70 100R

C350.1u

R96 1K

C650.1u

C1310.1u

R135 0R

L10
CX000800000

R68 100R

R130 0R

C71 0.01u

C340.1u

C1200.1u

RN19

33R

18
27
36
45

Q2

MMST3906

C10047uF/6.3V

C73 0.01u

C610.1u

L8
CX000800000

R122 0R(NC)

L9
CX000800000

C1360.1u

R133 0R

R1270R(NC)

C124100uF/25V

R1412.7K

R100 10K

R87 33K

R106 0R

C1280.1u

R89 33K

R18810K

RN5

33R

18
27
36
45

C970.1u

C2847uF/6.3V

RN9

33R

18
27
36
45

C1020.1u

C10747uF/6.3V

R86 10K

L3
CX000800000

RN12

33R

18
27
36
45

C72 0.01u

RN10

33R

18
27
36
45

R132 0R

R18910K

R1260R(NC)

C94

5p

R1402.7K

C113 0.1u

R105 0R/NC

R196 10K

RN1

33R

18
27
36
45

R197 10K
R198 10K

C910.1u

C1320.1u

R199 10K

R19010K

C840.1u

R200 10K

C116 0.1u

R11610K

R201 10K

C1230.1u

R202 10K

R144 0R

R69 100R

R104 1K

R75 0R

C9647uF/6.3V

C920.1u

C480.1u

C330.1u

L7
CX000800000

C1350.1u

U10

MAX809_0

1

2 3

OUT

GND VCC

R19110K

R134 0R

R107 100R
R109 100R

R131 10K

R114 0R

R71 100R

C680.1u

RN4

33R

18
27
36
45

C540.1u

C390.1u

R12310K(NC)

C430.1u

C1060.1u

R12410K(NC)

R111 470R

C11947uF/6.3V

R67 100R

R74 0R

C1110.1u

R19210K

C500.1u

R139 3.3K

C850.1u

RN14

33R

18
27
36
45

U7F
74LCX14MX

13 12

147

C1090.1u C660.1u

R88 33K

C370.1u

R110 0R

R77 0R

RN2

33R

18
27
36
45

C93 0.01u

CN3

AFN110-A2G1T

1

2

3

4

5

6

7

8

9

10

11

R19310K

C570.1u

C13447uF/6.3V

C74 0.01u

C70 0.01u

C400.1u

U7E
74LCX14MX

11 10

147

L6
CX000800000

C1270.1u

C870.1u

R145 0R

C810.1u

C530.1u

R117 470R

R66 249R

1%

R19410K

CN5

1841-30P

12
34
56
78
910
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30

C1250.1u

R148 10K

RN7

33R

18
27
36
45

C10347uF/6.3V

R136 0R(NC)

C95

5p

R120 0R(NC)

C320.1u

R79 3.3K

R147 10K

X1

14.318MHz

C1050.1u

L2
CX000800000

C118 0.1u

C5947uF/6.3V

C6247uF/6.3V

C300.1u

C117 0.1u

C880.1u

C630.1u

C790.1u

L13
CX000800000

R91 33K

C1300.1u

C990.1u

R137 0R(NC)

R81 33

R195 10K

R95 1K

R115 0R

R118 0R(NC)

R80 33

C7747uF/6.3V

C980.1u

U12

24LC32-SN

1
2
3456

7

8

A0
A1
A2

VSSSI

SCK

WP

VCC

C1010.1u

R128 0R

C12647uF/6.3V

R97 1K

C380.1u

R90 33K

R78 10K

R92 33K

C890.1u

C800.1u

C410.1u

C1210.1u

C1040.1u

C450.1u

C420.1u

L4
CX000800000

R138 0R(NC)

L1
CX000800000

C114 0.1u

C1220.1u

Model

Title

Date Rev:

ViewSonic Corporation

Controller

Viewsonic Corporation 72 VP2130b-1 Confidential - Do Not Copy

Place R602 termination close to
corresponding U600 Pins

+2.5V_DDR

FSCLK+ FSCLK-

FSVREF2

/FSRAS

FSADDR6

FSVREF2

FSADDR11

FSBKSEL0

+2.5V_DDR

FSDATA14

FSADDR4

FSDATA30

FSDATA10

FSDATA23

FSADDR5

FSDATA27

/FSCAS

FSDATA24

FSADDR10

FSADDR8

FSDATA11FSBKSEL1

FSDATA4

FSDATA21

FSDATA3

FSDQM0

FSDATA12

FSADDR1

FSDATA0

FSDATA6

FSDATA28

/FSWE

FSDATA9

FSDATA2

FSDATA22

FSDQM2

FSADDR2

FSDQM3

FSADDR7

FSDATA5

FSCLK+

FSDATA15

FSDATA29

FSDATA17

FSDATA13

FSCKE

FSADDR3

FSDATA7

FSDATA18

FSCLK-

FSDATA8

FSDATA1

FSDATA26

FSADDR9

FSDATA19

FSDQM1

FSDATA20

FSDATA16

FSDATA25

FSDATA31

FSADDR0

FSDQS2

FSDQS1

FSDQS0

FSDQS3

+2.5V_DDR

FSDATA[0..31] 5

FSDQS05

FSCLK-5

/FSRAS5

FSBKSEL05

/FSCAS5

FSBKSEL15

FSADDR[0..11]5

FSCLK+5

/FSWE5

FSCKE5

FSDQS15
FSDQS25
FSDQS35

FSDQM05
FSDQM15
FSDQM25
FSDQM35

+2.5V_DDR

FSVREF2

FSVREF

FSVREF2+2.5V_DDR

+2.5V +2.5V_DDR

+2.5V_DDR

+2.5V_DDR

C1480.1u

C1420.1u

R149 140R

C13847uF/6.3V

C1530.1u

C1540.1u

C1560.1u

C1550.1u

C1570.1u

C1580.1u

C1590.1u

C1600.1u

C1620.1u

C1610.1u

C1410.1u

C1470.1u

C1520.1u

C1640. 01u

C1510.1u

C1390.1u

L15
CX000800000

L14
CX000800000

R150

10K

C1460.1u

C1490.1u

U13

BGA144-12X12_0_8

K4D263238G-VC33

N12

M11

N2

L2

M2

L3

B3

H12

H3

B12

N5
N6
M6
N7
N8
M9

N9
N10
N11

M8

L6

N4

M5

B2

M12

L13

M3

M10

L9

C3C5C7C8C10

C12

E3

N13L4L7

L8

B7
C6
B6
B5
C2
D3
D2
E2

K13
K12
J13
J12
G13
G12
F13
F12

F3
F2
G3
G2
J3
J2
K2
K3

E13
D13
D12
C13
B10
B9
C9
B8

B11D4D6

M13

D9

D10

K8K9L5

E12

L11

F11

F4E9

E6

D11

D5

L10

C4
C11

M4

H4
H11

L12

N3

M7

B4

F5

F10G5G10H5H10J5J10K5K10K7K6

E10E8E7

E5

G4

G11J4J11K4K11

E11E4D8

D7

H13

H2
B13

F6

F7

F8

F9

G6

G7

G8

G9

H6

J9
J8
J7

J6
H9
H8
H7

L9

CKE

CLK

CS

CAS

RAS

WE

DM0
DM1
DM2
DM3

A0
A1
A2
A3
A4
A5
A6
A7
A8/AP
A9
A10

BA0
BA1

DQS0

CLK

NC
NC

NC

NC

VDDQ

VDDQ

VDDQ

VDDQ

VDDQ

VDDQ

VDDQ

VREF

VDD

VDD

VDD

DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7

DQ8

DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15

DQ16
DQ17
DQ18
DQ19
DQ20
DQ21
DQ22
DQ23

DQ24
DQ25
DQ26
DQ27
DQ28
DQ29
DQ30
DQ31

VSSQ

VSSQ

VSSQ

MCL

VSSQ

VSSQ

VSS

VSS

VSS

VDDQ

VDD

VDDQ

VDDQVSSQ

VSSQ

VSSQ

VSSQ

VSS

NC
NC

NC

NC
NC

NC

NC

A11

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSSQ

VSS

VSS

VSS

VSS

VSS

VSS

VDDQ

VDDQ

VDDQ

VDDQ

VDDQ

VDDQ

VDD

VDD

VDD

VDD

DQS1
DQS2
DQS3

VSS

VSS

VSS

VSS

VSS

VSS

VSS

VSS

VSS

VSS
VSS
VSS
VSS
VSS
VSS
VSS

A12

C13747uF/6.3V

C1400.1u

R2070R(NC) R20610K(NC)

R20410K(NC)R2050R

C1440.1u

C1430.1u

C1450.1u

C1630.1u

R203 10K

C1500.1u

R151

10K

Model

Title

Date Rev:

ViewSonic Corporation

DDR

Viewsonic Corporation 73 VP2130b-1

Confidential - Do Not Copy

0.8A Max

2

31

AIC1084/TO252 TOP VIEW

2

1

AIC1084/TO252 TOP VIEW

3

24

3

RBS31 TOPVIEW

1

132

MMBT3904L TOP VIEW

Vout=0.8(12K+62K)/12K=4.93

Modify Power AIC 1563 to
AIC 1577

1D2

3

B

G

C

E

2

3

S

1

1

2

3

線1,線2的地要拉回點

3,D28 L28 C216

要互相靠近

整塊線路靠近

CN6,C169,C170

更要靠近

CN6

ON/OFF

ADJ

ON/OFF

ADJ

PBIAS5

BRIGHTNESS5

PPWR5

SWITCH 5

INVSW5

USB_CTRL 4

+5V

+5V

+5V

+12V

Panel_Power

+3.3V

+2.5V

+1.8V

+5V

+18V

+20V

+5V

+5V

+3.3V

+3.3V

+5V

+12V

+18V

+20V

+12V

USB_VDD

+5V

USB_VDD

R179 220R

C200

1nF

R217
24K

C199

330pF

Q7

MMBT3904/NC

2

3

1

R218
12K/1%

R219
62K/1%

U20

AIC1084/TO252

1

23

ADJ/GND

VOUTVIN

R162 4.7K

R181

147R/1%

R170 4.7K/NC

C201 1nF

+

C188 100u/16V

Q4
AO4411

2
3
4 5

7
6

81

CN6

ENTERY_3273-G04N

12

34

L16
CX000800000/NC

C203

0.1u

R180

330/1%

C175 0.1u

Q5

MMBT3904

2

3

1

+

C187 100u/16V

1

H1 MTH276D126

2
3
4
5 6

7

8

9

1

H2 MTH276D126

2
3
4
5 6

7

8

9

1

H3 MTH276D126

2
3
4
5 6

7

8

9

C173 0.1u

R169

330/1%

L26
CX000800000

+

C184 100u/16V

C174 330u/16V

R1674.7K/NC

L18
CX000800000

CN7

4500-8P-R

1
2
3
4

5
6
7
8

R176

200/1%

R222

47

R166

200/1%

+

C181 100u/16V

R168 0R

L29

CX000800000

1 2

L20
CX000800000

R216
0/NC

R221

2.2K

L30

CX000800000

1 2

C186 0.1u

R1584.7K

Q8

MMBT3904

2

3

1

R17310K

U18

LT1117/TO223

23

1 4

VOUTVIN

ADJ/GND 4

U16

AIC1084/TO252

1

23

ADJ/GND

VOUTVIN

C208

0.1u

L23
CX000800000

R161 0R(NC)

+

C185 100u/16V

R174

200/1%

L28 100uH

12

C1661u

+

C180 100u/16V

C205

330u/16V

C206

1000u/6.3V

C209

0.1u

C214220u/35V/NC

C215 0.1u/NC

U24

MC7818/CASE936/NC

31

2

VOUTVIN

GND

L32

CX000800000/NC

1 2

C204

330u/16V

C167

2200P/6

12

Q10 SI2301DS

3

2

1

C211

0.1u

R83

10K/6

Q3

DTC144EUA

2

31

R82

82K/6

D28

SPL1040PT

1

2

3

U23

AIC1577

1
2
3
4 5

6

7

8

CS
ITH/RUN
FB
GND SW

DRI

BOOST

VIN

C168

2200P/6

1 2

C216

1000u/6.3V

C170

330U/16V

C169

0.1U/6

12

C207220u/35V/NC

R177 4.7K

R17810K

R84

10K/6

Q9 AF4410N

234 5

7681

L17
CX000800000/NC

U19 RBS31

1

2 3

4

R220

0R

L25
CX000800000

C210

1nF

R175 100K

C202

0.1u

1

H4 MTH276D126

2
3
4
5 6

7

8

9

Model

Title

Date Rev:

ViewSonic Corporation

POWER

Viewsonic Corporation 74 VP2130b-1

Confidential - Do Not Copy

11. PCB Layout Diagrams

11.1 BOTTOM

Viewsonic Corporation 75 VP2130b-1 Confidential - Do Not Copy

11.2 MK_TOP

Viewsonic Corporation 76 VP2130b-1 Confidential - Do Not Copy

11.3 PAD_TOP

Viewsonic Corporation 77 VP2130b-1 Confidential - Do Not Copy

11.4 VCC

Viewsonic Corporation 78 VP2130b-1 Confidential - Do Not Copy

11.5 TOP

Viewsonic Corporation 79 VP2130b-1 Confidential - Do Not Copy

11.6 SK_TOP

Viewsonic Corporation 80 VP2130b-1 Confidential - Do Not Copy

11.7 SK_BOT

Viewsonic Corporation 81 VP2130b-1 Confidential - Do Not Copy

* Reader’s Response*

Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous
improvement of our products. We would appreciate your completion of the Assessment Matrix
below, for return to ViewSonic Corporation.

Assessment

A. What do you think about the content of this Service Manual?

Unit Excellent Good Fair Bad

1. Precautions and Safety Notices

2. Specification

3. Front Panel Function Control Description

4. Circuit Description

5. Adjustment Procedure

6. Troubleshooting Flow Chart

7. Recommended Spare Parts List

8. Exploded Diagram and Exploded Parts List

9. Block Diagrams

10. Schematic Diagrams

11.PCB Layout Diagrams

B. Are you satisfied with this Service Manual?

Item Excellent Good Fair Bad

1. Service Manual Content

2. Service Manual Layout

3. The form and listing

C. Do you have any other opinions or suggestions regarding this service manual?

Reader’s basic dada:

Name: Title:
Company:
Add:
Tel: Fax:
E-mail:

After completing this form, please return it to ViewSonic Quality Assurance in the USA at
facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems
& Processes ([e-mail]

)

Viewsonic Corporation 82 VP2130b-1 Confidential - Do Not Copy