ViewSonic VA1912w-1,VA1912wb-1,VS10866 Service manual

Service Manual

ViewSonic VA1912w-1

VA1912wb-1

Model No. VS10866

19” Color TFT LCD Display

(VA1912W-1_VA1912Wb-1_SM Rev. 1b Aug. 2006)



ViewSonic

381 Brea Canyon Road, Walnut, California 91789 USA - [phone]

Copyright

Copyright © 2006 by ViewSonic Corporation. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of ViewSonic
Corporation.

Disclaimer

ViewSonic makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranty of merchantability or fitness for any
particular purpose. Further, ViewSonic reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation of ViewSonic to notify any
person of such revision or changes.

Trademarks

Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.

Revision History

Revision SM Editing Date ECR Number Description of Changes Editor

1a 10/25/05 Initial Release G. Han

1b 08/23/06 6224 Scaler change (updated RSPL , BOM , Schematic diagram) J. Chang

ViewSonic Corporation Confidential

i

-

Do Not Copy

VA1912w-1

VA1912wb-1

TABLE OF CONTENTS

1. Precautions and Safety Notices

2. Specification

3. Front Panel Function Control Description

4. Circuit Description

5. Adjustment Procedure

6. Troubleshooting Flow Chart

7. Recommended Spare Parts List

8. Exploded Diagram and Exploded Parts List

9. Block Diagram

10. Schematic Diagrams

11. PCB Layout Diagrams

1

5

9

15

17

40

48

53

55

56

66

ViewSonic Corporation Confidential

ii

-

Do Not Copy VA1912w-1

VA1912wb-1

1. Precautions and Safety Notices

1. Appropriate Operation

(1) Turn off the product before cleaning.

(2) Use only a dry soft cloth when cleaning the LCD panel surface.

(3) Use a soft cloth soaked with mild detergent to clean the display housing.

(4) Use only a high quality, safety approved AC/DC power cord.

(5) Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.

(6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.

(7) Do not touch the LCD panel surface with sharp or hard objects.

(8) Do not place heavy objects on the LCD display, video cable, or power cord.

(9) Do not use abrasive cleaners, waxes or solvents for your cleaning.

(10) Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

- Areas containing excessive dust and dirt.

- Near any appliance generating a strong magnetic field.

- In direct sunlight.

2. Caution

No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly

familiar with all of the following safety checks and servicing guidelines.

3. Safety Check

Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage

is exposed in such areas as the associated transformer circuits.

4. LCD Module Handling Precautions

4.1 Handling Precautions

(1) Since front polarizer is easily damaged, pay attention not to scratch it.

(2) Be sure to turn off power supply when connecting or disconnecting input connector.

(3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.

(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.

(6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.

(7) Do not open or modify the Module Assembly.

(8) Do not press the reflector sheet at the back of the module in any direction.

(9) In the event that a Module must be put back into the packing container slot after it was taken out of the

container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the

CFL Reflector edge softly. Otherwise the TFT Module may be damaged.

(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface

Connector of the TFT Module.

ViewSonic Corporation Confidential

1

-

Do Not Copy

VA1912w-1

VA1912wb-1

(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or

bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration

that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module

may be damaged.

(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local

ordinances or regulations for disposal.

(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module

should be supplied with power that complies with the requirements of Limited Power Source

(IEC60950 or UL1950), or an exemption should be applied for.

(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950

or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit

ViewSonic Corporation Confidential

2

-

Do Not Copy

VA1912w-1

VA1912wb-1

Correct methods : Incorrect Methods :
Only touch the metal-frame of the panel or the front
cover of the monitor.
Do not touch the surface of the polarizer .

Surface of the panel is pressed by fingers & this may
cause “ MURA “

Take out the monitor with cushion Take out the monitor by grasping the LCD panel.

That may cause “ MURA“.

Place the monitor on a clean & soft foam pad . Place the monitor on foreign objects .

That could scratch the surface of panel

ViewSonic Corporation Confidential

3

-

Do Not Copy

VA1912w-1

VA1912wb-1

2. Specification

INTRODUCTION

FEATURES VA1912w / VA1912wb

Size 19” wide
Luminance (Typ, cd/㎡) 300 cd/㎡

Contrast Ratio (Typ) 500:1

TFTLCD PANEL

Colors ( 6 bit + 2 bit FRC) 16.2 M colors
Response Time (Typ) 8 ms
Viewing Angle (H/V) 150 ° / 130 °
Recommend resolution 1440 x 900@60Hz

Input Signal

Analog (75ohms, 0.7/1.0 Vp-p) Yes
Digital Yes
Separate Sync Yes

Sync Compatibility

Composite Sync No
Sync on Green No
PC Yes

Compatibility

Power Mac Yes

TV Box (NextVision 6) Yes
Power Voltage AC 100-240V, 50/60Hz Yes
Power
Consumption

On Mode(Max / Typ) 36W(max) / 32W(typ)

Sleeping Mode (Max)

≦2W

Audio Amplifier / Speaker 1.5 W / 2.5W x 2

Yes

Ergonomics

Tilt ( 20 ° to -5 °)

Swivel No

Pivot No

Height Adjust No

OSD Control

[; X] [ 1 ] [▼] [▲] [ 2 ] [

]

Physical (W x H x D mm)
Dimension

Package (W x H x D mm)

Weight

Physical (Net kg/lb) 4.5kg (9.9lb)

Package (Gross Kg/lb) 6.2kg (13.7lb)

Temperature ( / )℉℃ 41℉-95 /℉ +5℃-+35℃ Operating
Condition

Storage Condition

Humidity (%) 20 % - 80 %

Temperature ( / )℉℃ -4℉-131 /℉ -20℃-55℃

Humidity (%) 20 % - 85 %

CB / TCO03 / UL/cUL / FCC-B / ICES 003 / Argentina-TUV/S /
Regulation

NOM / EPA Energy Star / TUV/Ergo / ISO13406-2 / TUV/GS / CE

/ GOST-R / SASO / BSMI / PSB / C-Tick / Korea (MIC) / CCC

GENERAL specification

Test Resolution & Frequency 1440 x 900 @ 60Hz
Test Image Size Full Size

Contrast and Brightness Controls

Factory Default:
Contrast = 70%, Brightness = 100%

Yes

451 x 391 x 197 (mm)

17.8 x 15.4 x 7.8 (in)

538 x 470 x 158 (mm)

21.2 x 18.5 x 6.2 (in)

ViewSonic Corporation Confidential

4

-

Do Not Copy

VA1912w-1

VA1912wb-1

PRODUCT DEFINITION AND SPECIFICATION

Region

VSA (M) VSAP (J) VSE (E) VSCN (G)

Product Name VA1912w / VA1912wb
Model Number VS10866

English, French, German, Italian, Spanish,

OSD Languages

Finnish, Japanese, Traditional Chinese,

Simplified Chinese
TFT LCD Panel and Model # Vendor : CMO, Model # : A190A2
Scalar Model # : Mstar TSU M57AK

Input Signal Analog / Digital
Sync Compatibility Separate

Audio Amplifier 1.5W x 2 / Speaker 2.5W x 2
Adapter NO

Power Cable Refer to Appendix D

Analog Cable (1.8 m, color : black), with PC

2001 and Hot Plug Detect &DDC

Audio Cable (1.8m, Color: black) with PC

2001

DVI Cable(1.8m, color: black) with PC 2001

ViewSonic CD Wizard

ViewSonic Quick Start Guide

Screen Protector Mylar

Yes Yes No Yes

Arabic, English, Finnish, Spanish, German,

Italian, Swedish, Polish, Korean, Portuguese,

Russian, French, Simplified Chinese,

Traditional Chinese, Hungary, Czech, Turkish

YES YES YES YES

Warranty Sticker NO NO NO
Warranty Card NO NO NO
Carton Sticker NO NO NO
PE bag of Carton

NO NO NO

YES

YES

YES
YES
YES

NO

VIDEO INTERFACE

Analog Input Connector DB-15 (Analog), refer the appendix A
Digital Input Connector N/A
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief Equal to twice the weight of the monitor for five minutes
Video Cable Connector DB-15 Pin out Compliant DDC 2B

1. Video RGB (Analog)

Video Signals

Video Impedance 75 Ohms (Analog)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC 2B Compliant with Revision 1.3
Sync Compatibility Separate Sync

Video Compatibility

Resolution Compatibility

Exclusions Not compatible with interlaced video

2. DVI (Digital)
Separate

Shall be compatible with all PC type computers,
Macintosh computers, and after market video cards
640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x
600, 832 x 624, 1024 x 768, 1152 x 864, 1280 x 768,
1280 x 960, 1280 x 1024, 1440 x 900

* The image vertical size might not be full screen.
But the image vertical position should be at the center.

ViewSonic Corporation Confidential

5

-

Do Not Copy

VA1912w-1

VA1912wb-1

4-3 POWER SUPPLY

Power Supply (Adapter) Part Number: 27-D003247
Input Voltage Range 90 TO 264 VAC
Input Frequency Range 47 TO 63 HERTZ
Short Circuit Protection Output can be shorted without damage
Over Current Protection FUSE 3.15A typical at 250 VAC
Leakage Current 75 mA (Max) at 240VAC / 50Hz
EFFICIENCY 80 % typical at 100VAC @60Hz
Fuse Internal and not user replaceable
Power Dissipation 36 Watts
Max Input AC Current 1.6 Arms @ NOMINAL range
INRUSH CURRENT (COLD START) 80 A @ 240VAC , 50Hz

Shall start and function properly when

Power Supply Cold Start

under full load, with all combinations of
input voltage, input frequency, and
operating temperature

Power Supply Transient Immunity

Power Supply Line Surge Immunity

Shall be able to withstand an EN61000-4-4
±2KV transient test with no damage
Shall be able to withstand ±2KV (L-L) and
±2.3KV (L-PE) with no damage
Shall be able to function properly, without

Power Supply Missing Cycle Immunity

reset or visible screen artifacts, when ½
cycle of AC power is randomly missing at
nominal input
The power supply shall not produce audible
noise that would be detectable by the user.

Power Supply Acoustics

Audible shall defined to be in compliance
with ISO 7779 (DIN EN27779:1991) Noise
measurements of machines acoustics.
Power Switch noise shall not be considered

Power Saving Operation(Method) VESA DPMS Signaling

ON Mode < 36 W (max) / 32 W (typ)

Power Consumption

SEELPING MODE < 2W
OFF MODE < 1W

Recovery Time ON MODE = N/A, ACTIVE OFF < 5 SEC

ELECTRICAL REQUIREMENT

Horizontal / Vertical Frequency

Horizontal Frequency 30 – 82 KHZ
Vertical Refresh Rate 50 – 85* HZ.
Maximum Pixel Clock 135 MHz (EDID file is 140MHz)
Sync Polarity Independent of sync polarity.

ViewSonic Corporation Confidential

6

-

Do Not Copy

VA1912w-1

VA1912wb-1

Timing Table

Item Timing Analog Digital

1 640 x 350 @ 70Hz, 31.5kHz Yes Yes
2 640 x 400 @ 60Hz, 31.5kHz Yes* Yes
3 640 x 400 @ 70Hz, 31.5kHz Yes Yes
4 640 x 480 @ 60Hz, 31.5kHz Yes Yes
5 640 x 480 @ 67Hz, 35.0kHz Yes Yes
6 640 x 480 @ 72Hz, 37.9kHz Yes Yes
7 640 x 480 @ 75Hz, 37.5kHz Yes Yes
8 640 x 480 @ 85Hz, 43.27kHz Yes Yes

9 720 x 400 @ 70Hz, 31.5kHz Yes Yes
10 800 x 600 @ 56Hz, 35.1kHz Yes Yes
11 800 x 600 @ 60Hz, 37.9kHz Yes Yes
12 800 x 600 @ 75Hz, 46.9kHz Yes Yes
13 800 x 600 @ 72Hz, 48.1kHz Yes Yes
14 800 x 600 @ 85Hz, 53.7kHz Yes Yes
15 832 x 624 @ 75Hz, 49.7kHz Yes Yes
16 1024 x 768 @ 60Hz, 48.4kHz Yes Yes
17 1024 x 768 @ 70Hz, 56.5kHz Yes Yes
18 1024 x 768 @ 72Hz, 58.1kHz Yes Yes
19 1024 x 768 @ 75Hz, 60.0kHz Yes Yes
20 1024 x 768 @ 85Hz, 68.67kHz Yes Yes
21 1152 x 864@ 75Hz, 67.5kHz Yes Yes
22 1280 x 1024 @ 60Hz, 63.4kHz Yes Yes
23 1280 x 1024 @ 75Hz, 79.97kHz Yes No
24 1280x 768 @ 60Hz, 47.78kHz Yes Yes
25 1280 x 960 @60Hz, 60kHz Yes Yes
26 1440 x 900 @ 60Hz, 55.96kHz Yes Yes

*The image vertical size might not be full screen.

FRONT PANEL CONTROLS AND INDICATORS

Front Panel Hardware Controls

Power Switch (Front Head) Power Control, soft Power Switch.
Power LED (Front Head) Green – ON

Orange – Active Off

Dark = Soft Power Switch OFF
Front Panel Controls (Head)
[;X] [ 1 ] [▼] [▲] [ 2 ] [ ]

Reaction Time OSD must fully appear within 0.5s after pushing Button 1

Short Cuts Function from the button(s)

[1] Main Menu
[2] Input toggle (Analog or Digital)

[▼] or [▲]

[▼] + [▲] Recall both of Contrast and Brightness to default

[1] + [2]

[1] + [▼] + [▲] White Balance. (Not shown on user’s guide)

[1] + [▼] Power Lock
[1] + [▲] OSD Lock

[;X] Audio Mute on /off

Remark : All the short cuts function are only available while OSD off

ViewSonic Corporation Confidential

To immediately activate Contrast menu. It should be change to Brightness
OSD by push button [2]

Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
mode

] Power

[

[ 1 ] Button 1

[ 2 ] Button 2

[▲] Up arrow button

[▼] Down arrow button

[; X] AUDIO MUTE ON/OFF

Note: Power Button, Button 1 and Button 2 and Mute

Button must be one-shot logic operation. (i.e. there should

be no cycling)

-

7

Do Not Copy

VA1912w-1

VA1912wb-1

Short Cuts Function from the button(s)

[1] Main Menu
[2] Input toggle (Analog or Digital)

[▼] or [▲]

[▼] + [▲] Recall both of Contrast and Brightness to default

[1] + [2]

[1] + [▼] + [▲] White Balance. (Not shown on user’s guide)

[1] + [▼] Power Lock
[1] + [▲] OSD Lock

[;X] Audio Mute on /off

Remark : All the short cuts function are only available while OSD off

To immediately activate Contrast menu. It should be change to Brightness
OSD by push button [2]

Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
mode

Panel Characteristics:

Model number A190A2
Type TN type with TTL interface
Active Size 410.4mm(H) x 256.5mm(V)
Pixel Arrangement RGB Vertical Stripe
Pixel Pitch 0.285 mm(V) x 0.285mm(H)
GLASS TREATMENT Anti Glare (Hard coating 3H)
# OF BACKLIGHTS 4 CCFL direct light
BACKLIGHT LIFE 50,000 Hours (min)
Luminance (Center) –
Condition:

300 cd/㎡ (Typ after 15 minute warm up)
230 cd/㎡ (Min after 15 minute warm up)

CT = 6500K, Contrast = Max,
Brightness = Max

U = 1.3 (typ), 1.5 (max).

Brightness Uniformity (13 Points)

U = Min Luminance in 13 points / Max

Luminance in 13 points
Contrast Ratio 500 (typ), 350 (min)
Color Depth 16 million colors (6 bit + 2 bit FRC)

@ CR>10
Viewing Angle (Horizontal)

Typical: 150

Minimum: 130

@ CR>10
VIEWING ANGLE (VERTICAL)

Typical: 130

Minimum: 110
Response Time
10%-90% @ Ta=25°C
Panel Defects Please see Panel Quality Specifications.

8ms (Tr= 2 ms, Tf = 6 ms) (typ)

18 ms (Tr= 7 ms, Tf = 11 ms) (max)

@ CR>5
Typical: TBD
Minimum: TBD
@ CR>5
Typical: TBD
Minimum: TBD

ViewSonic Corporation Confidential

8

-

Do Not Copy

VA1912w-1

VA1912wb-1

3. Front Panel Function Control Description

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OSD controls which display
on the screen. The OSD controls are explained at the top of the next page and are defined in
“Main Menu Controls” on page 10.

Main Menu

with OSD controls

Front Control Panel

shown below in detail

Displays the Main Menu or

exits the control screen and

saves adjustments.

Audio Mute

button turns

the sound off

Scrolls through menu options and
adjusts the displayed control.

Also a shortcut to display the Contrast
adjustment control screen.

Displays the control screen
for the highlighted control.

Also toggles between two
controls on some screens.

Also a shortcut to toggle
analog and digital connection.

Power light
Green = ON
Orange = Power Saving

Standby Power
On/Off

ViewSonic Corporation Confidential

9

-

Do Not Copy

VA1912w-1

VA1912wb-1

The command line at the bottom of the
control screen tells what to do next from
this screen. You can toggle between control
screens, adjust the selected option, or exit
the screen.

. (The black border around the edge of the screen should

barely touch the illuminated “active area” of the LCD display.)

ViewSonic Corporation Confidential

10

-

Do Not Copy

VA1912w-1

VA1912wb-1

Main Menu Controls

Adjust the menu items shown below by using the up S and down T buttons.

Control Explanation

Auto Image Adjust sizes and centers the screen image automatically.

Contrast adjusts the difference between the image background (black level)

and the foreground (white level).

Brightness adjusts background black level of the screen image.

Input Select toggles between inputs if you have more than one computer

connected to the VA1912w/VA1912wb.

Audio Adjust
Vol um e increases the volume, decreases the volume, and mutes the audio.
Mute temporarily silences audio output.

Color Adjust provides several color adjustment modes, including preset color

temperatures and a User Color mode which allows independent adjustment of
red (R), green (G), and blue (B). The factory setting for this product is 6500K
(6500 Kelvin).

9300K-Adds blue to the screen image for cooler white (used in most office
settings with fluorescent lighting).

6500K-Adds red to the screen image for warmer white and richer red.

5400K-Adds green to the screen image for a darker color.

ViewSonic Corporation Confidential

11

-

Do Not Copy

VA1912w-1

VA1912wb-1

Control Explanation

5000K-Adds blue and green to the screen image for a darker color.

User Color Individual adjustments for red (R), green (G), and blue (B).

1. To select color (R, G or B) press button [2].

2. To adjust selected color, pressSandT.

Important: If you select RECALL from the Main Menu when the product is

set to a Preset Timing Mode, colors return to the 6500K factory preset.

Information displays the timing mode (video signal input) coming from the
graphics card in the computer, the LCD model number, the serial number, and
the ViewSonic® website URL. See your graphics card’s user guide for
instructions on changing the resolution and refresh rate (vertical frequency).
NOTE: VESA 1440 x 900 @ 60Hz (recommended) means that the resolution is
1440 x 900 and the refresh rate is 60 Hertz.

Manual Image Adjust Sub-menu

H. Size (Horizontal Size) adjusts the width of the screen image.

H./V. Position (Horizontal/Vertical Position) moves the screen image left or

right and up or down.

ViewSonic Corporation Confidential

12

-

Do Not Copy

VA1912w-1

VA1912wb-1

Control Explanation

Fine Tune sharpens the focus by aligning text and/or graphics with pixel
boundaries.

NOTE: Try Auto Image Adjust first.

Sharpness adjusts the clarity and focus of the screen image.

Setup Menu displays the menu shown below:

Language Select allows the user to choose the language used in the menus and

control screens.

Resolution Notice allows the user to enable or disable this notice.

If you enable the Resolution Notice shown above and your computer is set at a

resolution other than 1440 x 900, the following screen appears.

OSD Position allows the user to move the OSD menus and control screens.

OSD Timeout sets the length of time the OSD screen is displayed. For example,

with a “30 second” setting, if a control is not pushed within 30 seconds, the
display screen disappears.

ViewSonic Corporation Confidential

13

-

Do Not Copy

VA1912w-1

VA1912wb-1

Control Explanation

OSD Background allows the user to turn the OSD background On or Off.

Memory Recall returns the adjustments back to factory settings if the display is

operating in a factory Preset Timing Mode listed in the Specifications of this
manual.

ViewSonic Corporation Confidential

14

-

Do Not Copy

VA1912w-1

VA1912wb-1

4. Circuit Description

1. LCD Integrated Power System (LIPS)

The LCD Integrated Power System (LIPS) is a power module combined adaptor and CCFL inverter. It accepts
100~240Vac and supply 12Vdc and 5Vdc to main board and TFT-LCD panel. About CCFL dimming and on/off
function is controlled by micro-controller.

2. Scaler

The TSUM57AK is total solution graphics processing IC for LCD monitors with panel resolutions up to SXGA. It is
configured with a high-speed integrated triple-ADC/PLL, an integrated DVI receiver, a high quality display processing
engine, and an integrated output display interface that can support RSDS panel interface format. To further reduce
system costs, the TSUM57AK also integrates intelligent power management control capability for green-mode
requirements and spread- spectrum support for EMI management.

The TSUM57AK incorporates the world’s first coherent oversampled RGB graphics ADC in a monitor controller
system. The oversampling ADC samples the input RGB signals at a frequency that is much higher than the signal
source pixel rate. This can preserve details in the video signal that ordinarily would be lost due to input signal jitter or
bandwidth limitations in non-oversampled systems. The TSUM57AK also incorporates a new Dynamic Frame Rate
(DFR) generator
rate, while eliminating the output end of frame short-line.

for the digital output video to the display panel that preserves the advantages of a fixed output clock

Block Diagram

ViewSonic Corporation Confidential

15

-

Do Not Copy

VA1912w-1

VA1912wb-1

3. Timing Controller

p

The CM2706B is a timing controller LSI for Office Application. It receives LVDS RGB data and synchronizes signal from
external video graphic adapter and then outputs RSDS (Reduced Swing Differential Signal) data and TTL control signals to
TFT LCD drivers.

Block Diagram

Data

convert

Output

latch

RSDS

transmitter

Output data

LVDS

in

ut data

LVDS

receiver

Smart

polarity

Source

Source driver

signals

control

Signal

sync

Gate

Gate driver

signals

control

Setting pins

ViewSonic Corporation Confidential

16

-

Do Not Copy

VA1912w-1

VA1912wb-1

5. Adjusting Procedure

A. Function Test and Alignment Procedure

1. All Modes Reset
You should do “All Model Reset” (Refer to Chap 3. Hot Keys for Function Controls) first. This action will
allow you to erase all end-user’s settings and restore the factory defaults.

2. Auto Image Adjust
The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen quality, the user
has to adjust each function manually.

A.Turn the computer and LCD monitor on.
B. Press the ‘Auto’ button on monitor keypad to Auto Adjust.

C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive seconds, during

which time you will notice the image change.

3. Firmware
Test Patten: Burn in Model (Refer to Chap3. Hot Keys for Function Control)

-Make sure the F/W is the latest version.

4. DCC
Test Patten: EDID program

-Make sure it can pass test program.

5 Window Shut Down

Test Signal: 1280*1024@60Hz
Test Pattern:

Checkered Pattern Every One Pixel (50%Green & 50%Blue)
Inspection Item: Flicker, Mura

6 Window BG

Test Signal: 1280*1024@60Hz
Test Pattern:

Window standard pattern
Inspection Item: Line Defect, Function Defect & Mura

7 25 Gray

Test Signal: 1280*1024@60Hz
Test Pattern:

Full Screen 25% White (Gray)
Inspection Item: Particle, Line Defect & Mura

ViewSonic Corporation Confidential

17

-

Do Not Copy

VA1912w-1

VA1912wb-1

8 50 Gray

Test Signal: 1280*1024@60Hz
Test Pattern:

Full Screen 50% White (Gray)
Inspection Item: Bright Dot, Particle, Line Defect & Mura

9 White Box

Test Signal: 1280*1024@60Hz
Test Pattern:

Window standard pattern
Inspection Item: Particle, Line Defect, Power, Image Remain & Mura

10 Black Box

Test Signal: 1280*1024@60Hz
Test Pattern:

Window standard pattern
Inspection Item: Bright Dot, Line Defect & Power

11 RED

Test Signal: 1280*1024@60Hz
Test Pattern:

Full Screen Red
Inspection Item: Bright Dot, Partial & Line Defect

12 Green

Test Signal: 1280*1024@60Hz
Test Pattern:

Full Screen Green
Inspection Item: Bright Dot, Partial & Line Defect

13 Blue

Test Signal: 1280*1024@60Hz
Test Pattern:

Full Screen Green
Inspection Item: Bright Dot, Partial & Line Defect

ViewSonic Corporation Confidential

18

-

Do Not Copy

VA1912w-1

VA1912wb-1