How it Works
ViewSonic
Loading...
PJ650/PJ520
User Manual
46 pgs2.37 Mb0

ViewSonic PJ650/PJ520, pj520, VPROJ27747-1W User Manual

PJ650
User Guide
Image Size 31” - 300”
LCD Projector
ViewSonic PJ650 i
Contents
Before Use ......................................................................................................................... 2
Projector .............................................................................................................................3
Remote Control ...................................................................................................................4
Putting batteries into the remote control unit ......................................................................5
Operating the remote control ..............................................................................................5
Adjusting the Projector's Elevator Feet ...............................................................................6
Adjusting the Screen Size and Projection Distance ....................................................7
Connecting your devices ..........................................................................................10
Plug & Play .......................................................................................................................10
Connecting to a Computer ................................................................................................11
Connecting to a DVD Player or VCR ................................................................................12
Connecting to a Display Monitor .......................................................................................13
Turning On The Power .............................................................................................14
Precautions .......................................................................................................................14
Turning Off The Power .............................................................................................15
Selecting an Input Signal ..........................................................................................16
Adjusting the Volume ................................................................................................17
Temporarily Muting the Sound .................................................................................. 17
Adjusting the Image Position ....................................................................................18
Using the Automatic Adjustment Feature ................................................................. 19
Correcting Keystrone Distortions ..............................................................................20
Using the Magnify Feature ........................................................................................ 21
Freezing the Screen .................................................................................................21
Signal Searching .......................................................................................................22
Selecting the Aspect Ratio ........................................................................................ 22
Temporarily Blanking the Screen .............................................................................. 22
Using the Menu Functions ........................................................................................23
Operating the PC Screen .......................................................................................... 24
PS/2, ADB, Serial Mouse Control .....................................................................................24
USB Mouse/Keyboard Control ..........................................................................................24
OSD Menu Function Description ...................................................................................25
Main Menu ................................................................................................................25
Picture 1 Menu .......................................................................................................... 26
Picture 2 Menu .......................................................................................................... 26
Input Menu ................................................................................................................27
Screen Menu ............................................................................................................ 28
ii ViewSonic PJ650
Option Menu .............................................................................................................30
Maintenance .....................................................................................................................31
Lamp ......................................................................................................................... 31
Lamp Life ..................................................................................................................32
Replacing the Lamp ..................................................................................................32
Caring for the Air Filter ..............................................................................................33
Caring for the Inside of the Projector ........................................................................34
Caring for the Lens ...................................................................................................34
Caring for the Cabinet and Remote Control Transmitter ..........................................34
Troubleshooting ..............................................................................................................35
On-screen Messages ................................................................................................35
Panel Lamp Indicators ..............................................................................................36
Problem Diagnostics .................................................................................................37
Specifications ..................................................................................................................38
Outline Dimension .....................................................................................................38
Customer Support ...........................................................................................................39
Limited Warranty .............................................................................................................40
VIEWSONIC Projector ..............................................................................................40
Appendix ..........................................................................................................................41
Power Cord Safety Guidelines ..................................................................................41
Compliance Information for U.S.A. ...........................................................................42
Compliance Information for Canada .........................................................................42
Compliance Information for European Countries ......................................................42
User Information for all Countries .............................................................................42
1 ViewSonic PJ650
Copyright © ViewSonic Corporation, 2003. All rights reserved.
Apple, Mac and ADB registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo
A-CD-PJ650
and OnView are registered trademarks of ViewSonic
Corporation.
VESA and SVGA are registered trademarks of the Video Electronics Standards Association.
DPMS and DDC are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
Electronic Warranty Registration
To meet your future needs, and to receive any additional product information as it becomes available, please register your projector's warranty on the Internet at:
http://www.viewsonic.com
For Your Records
Product Name: Model Number: Document Number:
ViewSonic PJ650 VPROJ27747-1W A-CD-PJ650-1
Serial Number: Purchase Date:
______________ ______________
ViewSonic PJ650 2
Before Use
Package Contents
Make sure all of the following items are included in the package. If anything is missing, please contact ViewSonic Corp.
NOTE:
Keep the original packing material for future shipment.
NOTE:
Applicable power cord is shipped with the projector to the point of destination. To avoid penetration of foreign objects, do not put the projector in a case or a bag together with any things
except the accessories of the projector, signal cables and connectors.
WARNING:
Before using this equipment, read this manual thoroughly. Always ensure that the equipment is used safely.
Projector
Power Cord Video/Audio Cable
RGB Video Cable
USB mouse cable
Remote ControlBatteries for
Remote Control
CD-Wizard
Quick Start Guide
Soft Case
3 ViewSonic PJ650
Component Names
Projector
MENU button
RESET button
KEYSTONE button
INPUT button
STANDBY/ON button
Zoom knob
Focus ring
Air filter
Elevator button
Remote sensor
Lens cap
AUDIO IN R and L ports
VIDEO IN port
S-VIDEO IN port
RGB IN 1 and 2 ports
AC power inlet
Elevator button
Power switch
CONTROL port
RGB OUT port
USB port
COMPONENT VIDEO port
LAMP indicator
TEMP indicator
POWER indicator
ViewSonic PJ650 4
Remote Control
REMOTE CONTROL DEVICE
SEARCH button
STANDBY/ON button
AUTO button
BLANK button
VOLUME button
MUTE button
KEYSTONE button
MENU button
RESET button
ENTER button
ESC button
, , ,
Cursor buttons
POSITION button
KEYBOARD buttons
FREEZE button
MAGNIFY buttons
ASPECT button
VIDEO button
RGB button
5 ViewSonic PJ650
Using the remote control
Putting batteries into the remote control unit
CAUTION
Precautions to observe in regards to the batteries Always handle the batteries with care and use them only as directed. Improper use may result in battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with
used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the
remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
Operating the remote control
• The remote control works with both the projector's front
and rear remote sensors.
• The range of the remote sensor on the front and back is 3
meters with a 60-degree range (30 degrees to the left and right of the remote sensor).
• Since the remote control uses infrared light to send
signals to the projector (Class 1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control's output signal to the projector.
ATTENTION
Precautions to observe when using the remote control
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you won't be using the
remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter
fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
1
Remove the battery cover
Slide back and remove the battery cover in the direction of the arro
w.
2
Insert the batteries
Align and insert the two AA batteries (that came with the projector) according to their plus and minus terminals (as indicated in the remote control).
3
Close the battery cover
Replace the battery cover in the direction of the arrow and snap it back into place.
approximately
3 meters
approximately
3 meters
ViewSonic PJ650 6
Setting up the projector
CAUTION
• Install the projector in a suitable environment according to instructions of the accompanying manual
“PJ650 Quick START GUIDE” and this manual.
• If you press the elevator buttons without holding the projector, the projector might crash down, overturn,
smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
Adjusting the Projector's Elevator Feet
You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
1
Press and hold in the elevator buttons.
2
Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position.
3
As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand.
7 ViewSonic PJ650
Adjusting the Screen Size and Projection Distance
Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen (1024x768 pixels).
a:
Distance from the projector to the screen (±10%).
b:
Distance from the lens center to the bottom of the screen (±10%).
c:
Distance from the lens center to the top of the screen (±10%).
If 4:3 aspect ratio.
If 16:9 aspect ratio.
Screen Size Inches (m)
a
Inches (m)
Minimum Maximum
b
Inches
(cm)
c
Inches
(cm)
30 (0.8) 35 (0.9) 42 (1.1) 1 (2) 17 (55) 40 (1.0) 47 (1.2) 56 (1.4) 1 (3) 23 (58) 50 (1.3) 59 (1.5) 71 (1.8) 1 (4) 29 (73) 60 (1.5) 71 (1.8) 85 (2.2) 2 (4) 34 (87) 70 (1.8) 83 (2.1) 100 (2.5) 2 (5) 40 (102) 80 (2.0) 95 (2.4) 114 (2.9) 2 (6) 46 (116)
90 (2.3) 107 (2.7) 129 (3.3) 3(7) 51 (131) 100 (2.5) 119 (3.0) 143 (3.6) 3(7) 57 (145) 120 (3.0) 143 (3.6) 172 (4.4) 3(9) 69 (174) 150 (3.8) 180 (4.6) 216 (5.5) 4 (11) 86 (218) 200 (5.0) 240 (6.1) 288 (7.3) 6 (15) 114 (290) 250 (6.3) 300 (7.6) 361 (9.2) 7 (18) 143 (363) 300 (7.5) 360 (9.2) 433 (11.0) 9 (22) 171 (435)
Screen Size Inches (m)
a
Inches (m)
Minimum Maximum
b
Inches
(cm)
c
Inches
(cm)
30 (0.8) 38 (1.0) 46 (1.2) 2 (4) 16 (41)
40 (1.0) 51 (1.3) 61 (1.6) 2 (5) 22 (55)
50 (1.3) 64 (1.6) 77 (2.0) 3 (6) 27 (69)
60 (1.5) 77 (2.0) 93 (2.4) 3 (8) 32 (82)
70 (1.8) 90 (2.3) 109 (2.8) 4 (9) 38 (96)
80 (2.0) 104 (2.6) 125 (3.2) 4 (10) 43 (110)
90 (2.3) 117 (3.0) 140 (3.6) 5 (12) 49 (124) 100 (2.5) 130 (3.3) 156 (4.0) 5 (13) 54 (137) 120 (3.0) 156 (4.0) 188 (4.8) 6 (15) 65 (165) 150 (3.8) 196 (5.0) 235 (6.0) 8 (19) 81 (206) 200 (5.0) 261 (6.6) 314 (8.0) 10 (26) 108 (275) 250 (6.3) 327 (8.3) 393 (10.0) 13 (32) 135 (343) 300 (7.5) 393 (10.0) 472 (12.0) 15 (39) 162 (412)
The screen
Top view
Side view
Top view
Side view
Lens center
Lens center
The screen
ViewSonic PJ650 8
Ports and Cables
Refer to this table to determine which projector port and cable to use for connecting to a given device. Use this table for determining which cables to prepare.
NOTE:
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB IN 1 port (DDC 1/2B compatible). Plug­and-Play may not work properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB IN 2 port if Plug­and-Play does not function correctly.
Function Projector Port Connection Cables
RGB input
RGB IN 1
Accessory RGB cable or optional RGB cable with D-sub 15-pin shrink jack and inch thread screws
RGB IN 2 RGB output RGB OUT USB mouse control USB Accessory USB cable PS/2 mouse control
CONTROL
Optional PS/2 mouse cable ADB mouse control Optional ADB mouse cable Serial mouse control Optional serial mouse cable RS-232C communication Optional RS-232C cable
S-video input S-VIDEO IN
Optional S-video cable with mini DIN 4- pin
jack Video input VIDEO IN Accessory audio/video cable
Component video input
COMPONENT VIDEO Y
Optional component video cable
COMPONENT VIDEO C
B
/P
B
COMPONENT VIDEO CR /P
R
Audio input
AUDIO IN L
Accessory audio/video cable or optional
audio cable with RCA jack
AUDIO IN R
9 ViewSonic PJ650
SetUp Reminders
WARNING:
Precautions to observe in regards to the power cord: Please use extra caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector:
• Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREEPRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect your devices to the projector
Connect your computer, VCR and/or other devices you will be using to the projector.
2
Insert the batteries into the remote control
.
3
Connect the power cord (1) Connect the connector of the electrical power cord to the AC inlet of the main unit. (2) Firmly plug the power cord's into the outlet.
Power cord
Power outlet
AC inlet
ViewSonic PJ650 10
Connecting your devices
Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)
CAUTION
• Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “PJ650 Quick START GUIDE”.
ATTENTION
Precautions to observe when connecting other devices to the projector
• Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.
• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the PJ650 User Guide for the pin assignment of connectors and RS-232C communication data.
• Make sure that you connect devices to the correct port. Incorrect connection may result in mal-function and/or damage to the device and/or projector.
• A component cable and some other cables have to be used with core set. Use the accessory cable or a designated type cable for the connection. For cables that have a core only at one end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
NOTE:
When connecting the projector to a notebook computer, set it so as to activate the RGB external image output (setting it to CRT display or to simultaneous LCD and CRT display). For more information, refer to the instruction manual of the notebook computer.
Plug & Play
This projector is compatible with VESA DDC 1/2B. Plug & Play is possible by connecting to a computer that is compatible with VESA DDC (Display Data Channel).
Use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B compatible). Plug & Play may not operate by any other connection.
NOTE:
• Plug & Play is a system configured with peripheral equipment which includes a computer, display and an operating system.
• This projector is recognized as a Plug & Play monitor. Load the driver contained in the CD Wizard included with the unit.
DVD players
Display monitors
Laptop computers
Desktop computers
VCRs
11 ViewSonic PJ650
Connecting to a Computer
ATTENTION:
Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the laptop computer’s instruction manual of the corresponding laptop computer.
NOTE:
• Some computers may have multiple display screen modes. The use of some of these modes may not be
possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
Laptop computer
Desktop computer
Loading...
+ 32 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use