Viewsonic NEOSAT SP5106V User Manual

English

Copyright©ViewSonic Corporation, 2004. All rights reserved.

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the

right to change product specifications without notice. Information in this document may
change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes
abailable, please register your product on the Internet at: www.viewsonic.com.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

ViewSonicSP5106v

VS10108

VSCEPRSPEC6799

______________
______________

ViewSonic SP5106v 103/17/04 B

English

Getting Started

Congratulations on your purchase of a ViewSonic® speaker system.
Important! Save the original box and all packing material for future shipping needs.

CAUTION:

with that adapter. Be sure the power outlet is located near the unit, so that it is easily
accessible.

This device has an external power adapter, the device must be operated

Control Functions

Wired Remote Control Box

1 - Power & Volume

Press the button to switch the power on and the LED will highlight in green.

If you turn right the knob until to the max that you will get the loudest volume.

2 - Treble

Turn right the button and you will get the high-pitched voice.

3 - Bass

Turn right from (-) mark to (+) mark that you will get louder and louder bass.

4 – Earphone

To plug in earphone when you want to use earphone.

ViewSonic SP5106v 2

English

Rear Panel

5 - Input Signal Switch

Shrink the button and switch to 2.0 CH, extend the button and switch to 5.1 CH.

6 - Power

Press the on or off side to switch the power.

Rear Panel

ViewSonic SP5106v 3