ViewSonic N3250w-1L, VS11335-1L Service Manual

Service Manual

ViewSonic N3250w-1L

Model No. VS11335-1L

32” LCD TV

(N3250w-1L_SM Rev.1b_Aug.2008)

ViewSonic® 381 Brea Canyon Road, Walnut, California 91789 USA - [phone]

Copyright

Copyright© 2006 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.

Disclaimer

ViewSonic makes no representations or warr ant ies, either expressed or impli ed, with respect to the contents
hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further,
ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents
hereof without obligation of ViewSonic to notify any person of such revision or changes.

Trademarks

Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.

Revision History

Revision SM Editing Date ECR Number Description of Changes Editor

1a 06/01/06 Initial Release Sophia Kao
1b 08/18/08

Add schematics of power / supply board
and menu / power lock feature

Sophia Kao

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

i

TABLE OF CONTENTS

1. Precautions and Safety Notices.................................................................1

3. Front Panel Function Control Description................................................ 9

4. Circuit Description.......................................................................................18

5. Adjustment Procedure................................................................................21

6. Trouble Shooting Flow Chart................................................................ .....51

7. Block Diagram.............................................................................................55

8. Schematic Diagrams....................................................................................56

9. PCB Layout Diagrams.................................................................................76

10. Exploded Diagram And Exploded Parts List...........................................82

11. Recommend Spare Parts List...................................................................85

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

ii

2. Specification.................................................................................................4

1. Appropriate Operation

(1) Turn off the product before cleaning.
(2) Use only a dry soft cloth when cleaning the LCD panel surface.
(3) Use a soft cloth soaked with mild detergent to clean the display housing.
(4) Disconnect the power plug from AC outlet if the product is not used for a long period of

time.

(5) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display

off.
(6) Do not touch the LCD panel surface with sharp or hard objects.
(7) Do not place heavy objects on the LCD display, video cable, or power cord.
(8) Do not use abrasive cleaners, waxes or solvents for your cleaning.
(9) Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

- Areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic field.

- Place in direct sunlight.

2. Caution

No modification of any circuit should be attempted. Service work should only be performed after
you are thoroughly familiar with all of the following safety checks and servicing guidelines.

3. Safety Check

Care should be taken while servicing this LCD display. Because of the high voltage used in the
inverter circuit, the voltage is exposed in such areas as the associated transformer circuits.

4. Power Supply Requirements

The external AC power operating range shall be from 90 to 264Vac

5. LCD Module Handling Precautions

5.1. Handling Precautions

(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when inserting or disconnecting from input connector.
(3) Wipe off water drop immediately.Long contact with water may cause discoloration or

spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard

surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and insure human

earth when handling.
(7) Do not open nor modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module to any directions.
(9) In case if a Module has to be put back into the packing container slot after once it was

taken out from the container, do not press the center of the CCFL Reflector edge.

Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT

Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor

tilt the Interface Connector of the TFT Module.
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for

example), do not twist nor bend the TFT Module even momentary. At designing the

enclosure, it should be taken into consideration that no bending/twisting forces are

applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please

follow local ordinances or regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module.

The LCD module should be supplied by power complied with requirements of Limited

Power Source (IEC60950 or UL1950), or be applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

1

1. Precautions and Safety Notices

Circuit (IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.

5.2. Handling and Placing Methods
Correct Methods: Incorrect Methods:

Only touch the metal frame of the LCD panel
or the front cover of the monitor. Do not touch
the surface of the polarizer.

Surface of the LCD panel is pressed by fingers

and that may cause “Mura”

Take out the monitor with cushions Taking out the monitor by grasping the LCD

panel. That may cause “Mura”

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

2

Place the monitor on a clean and soft foam pad. Placing the monitor on foreign objects. That

could scratch the surface of the panel or cause
“Mura”

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

3

Parameter Specification

LCD Type

a-Si TFT Active Matrix Wide Color, Trans missive Mode, Normally

Black
LCD Interface 1-Channel LVDS
Resolution (Native) WXGA, 1366 x 768
Display Area 27” diagonal; 596.259 (H) x 335.232 (V) mm.
Pixel Pitch 0.4365(H) × 0.4365(V) mm
Viewing Angle

H = +/- 88°, V = +/- 88° with CR≥20 (Typical)
Contrast Ratio 1000:1 (Typ); 800:1 (Min)
Brightness 550 nits (Typ.); 450 nits (Min)
Response Time 8ms, (Typical), g-g
Color Gamut NTSC 75% Typ
Brightness Uniformity 1.3 (Max), measured per panel spec.
Chromaticity (CIE1931) White-x:0.285,White-y:0.293 (Standard Mode Only)
Colors 16.7M (8-bit)
Surface Treatment Hard coating (3H)
Backlight 14 CCFLs (Cold cathode Fluorescent Lamp)

Panel Acceptance

Refer to the panel acceptance criteria specification.

Note: Intermittent and/or Display Pattern defects which result in

further bright or dark dots will be counted individually against the

above specification.

Front Screen Artifacts

VS Standard:

a.) No Visible Streaking, Sag or Smearing artifacts when driven by

the specified video cards (see 7.1 General Test Equipment) in the
primary mode (VGA at 60 Hz) and after user adjustment

b.) No image drift or lose fine-tune settings due to panel temperature

change
Note: Panel performance characteristics “ MUST BE” met in all display modes/inputs at
standard test conditions.

1. RF Tuner

RF tuner of this product shall be provided by” Philips FQ1236/FH-5” for NTSC/ATSC. The

following table defines this tuner specification.

Parameter Specification

RF Input Level 45 ~ 85dBµV

RF Tuning Range

NTSC/PAL: 55.25 to 801.25 MHz, 2-69
Channels for Off-Air and 2-125 Channels for

CATV
RF Tuner Sensitivity (S/N Ratio at un-weight) 45 dB (min.)
Channel Bandwidth NTSC/PAL: 6 MHz Maximum

0.7(min.)–1.1(max.) V

CVBS Characteristics:
Video Amplitude Signal
DC Level Sync Pulse

Typical. 0.35 V
Audio Characteristics:
AF Output Level Measured via LP 20 kHz
Filter, RMS Decoder,
75us De-emphasis
THD
S/N

Typical. 0.35Vrms

10% (max.)

44 dB (min.)
Compatible system TUNER NTSC/PAL
Compatible system AV NTSC M/PAL

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

4

2. Specification

2. Video

Built-in A/D converter shall provide analog to digital converter for this product.

Input Parameter Specification

CVBS Characteristics:
Video Amplitude Signal
DC Level Sync Pulse

0.7(min.)–1.1(max.) V

Typical. 0.3 Vp-p
S-Video Characteristics:
Video Amplitude Signal
DC Level Sync Pulse

Y : 1.0Vp-p W / Neg. Sync (IN 75 Ω )

C : 0.285Vp-p (IN 75 Ω )

Y, Cb,Cr Characteristics:
Video Amplitude Signal
DC Level Sync Pulse

Y:1.0Vp-p(IN 75 Ω)

Pb:0.7 Vp-p(IN 75 Ω),Pr:0.7 Vp-p(IN 75 Ω)

Video Bandwidth NTSC: 6 MHz Maximum
HDMI Characteristics Panel Link T.M.D.S HDMI-1.1
RGB Characteristics:
Signal Type
Sync Type
Input Signal Rating
Sync Level:
Frequency Range
Pixel Color

Analog VGA

TTL, Separate Sync, with 4.7KΩ pull-down resistors

1250mv Max without damage to the product, 0-700 mv Full

Range

2.5-5.25 V

Horizontal: 30-80K Hz, Vertical: 50-75 Hz

16 M

3. Audio

Audio amp of this product shall be provided by “Advanic” with a Model Number of
AD8256 , “MTK” MT8202 for N3250W-L shall be used as sound
processor. In addition, a pair of speakers shall be integrated within this product. The audio
signals of this product shall comply with the specification listed in the following table.

Parameter Specification

Phone Jack out
Tuner Input Base band Input
Speaker Power Output Max

Rating

10 W x 2 at 10% T.H.D

Distortion

10W x 2 at 10% T.H.D.
Distortion

Speaker Impedance

main spk :3 Ω + 3 Ω

Treble spk :5.2 Ω

main spk :3 Ω + 3 Ω
Treble spk :5.2 Ω

Line In Per Tuner Spec

500 mV rms (Typ)

1.6 V rms (Max)

Impedance: 600 ohms

Line Out

500 mVrms +/- 10%

@1K Hz tone (with +/-25k Hz

deviation at input, volume

with non-attenuation and

loading with 47k Ohm)

500 mVrms +/- 10%
@1K Hz tone (with +/-25k Hz
deviation at input, volume
with non-attenuation and

loading with 47k Ohm)
Flatness of Amplitude Response
(100Hz ~ 10KHz)

+/- 3 db (at 1KHz @1W) +/- 3 db (at 1KHz @1W)

Total Harmonic Distortion
(1KHz @1W)

2% 1%

Signal to Noise (1KHz @1W) 30 dB (40Hz to 15KHz) 40dB(400Hz to 20 kHz)

4.

Electrical

The following table defines the electrical specification of this product.

ELECTRICAL SPECIFICATION

Power Input Voltage Range 100-240VAC +/- 10% Wide Range

Input Frequency Range 47-63 Hz

Input Current 3.0A @ 115VAC // 1.5A @ 230VAC

Power Supply Inrush

Max in < 150A (with fully loaded power supply) at
230Vac

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

5

Shall not result in permanent failure of power supply
(including blown fuse)

Power Consumption: Normal Normal: 150 W (Max) // Stand by: < 3 W

Interference with RF and Video

There shall be no visible interference between power
supply, RF and video signals. This applies to all available
RF channels and video modes.

Electromagnetic Compatibility

This product shall adhere to the compatibility and

immunity specifications in FCC.
Power Supply Transient Immunity
(Supply Transients and Outage)

Able to withstand an ANSI / IEEE C62.41 – 1980 2000V

ring wave with no damage.

Surge Immunity Test

Able to withstand 1.25X nominal Line Voltage for one

cycle with no damage.

Power Supply Missing Cycle Immunity

Function properly without reset or visible screen artifact

when 1/3 cycle of AC Power is randomly missing.

Power Supply Acoustics

Power supply shall not produce any audible noise during

startup and normal operation. Audible shall define to be

in compliance with ISO 7779 (DIN EN27779: 1991) .

Power Switch noise shall be Excluded.
Efficiency >= 80% @ full load, nominal line

Leakage Current <0.5mA @ 240VAC

Power Saving(DPMS) N/A

Recovery Time < 3 sec.

Power Factor Correction Compliant with EN61000-3-2

5. Firmware & OSD

The product firmware of VS11257-1M / VS11335-1M shall have a firmware version of
V:P 01. Any changes/revisions afterward shall also be pre-approved by ViewSonic in
written. For VS11257-1M / VS11335-1M, its firmware shall have a built-in frequency
table for NTSC/ATSC off-air TV/CATV, Closed-Caption, and with MTS implementation.

All audio/video and other output adjustments shall be performed by using an On Screen
Display (OSD) via a Remote Control Unit (RCU) adjustments. The following tables list
the OSD functions supported by VS11257-1M / VS11335-1M.

OSD Table for

VS11257-1M / VS11335-1M

OSD

Brightness Adjust the Black levels
Contrast Adjust the White levels
Sharpness Adjust the Sharpness levels
Color Adjust the Color levels
Tint Adjust the Tint levels
Color Temperature Selections on Normal, Warm, user, Cold
Back Light Adjust the Back Light levels
Aspect ratio Selections the Image Size on Full, Wide1, Wide2, Wide3, 4:3, 16:9, No

scale, Normal

Language Selections English, Spanish ,

By area have some difference
OSD Timeout Set OSD disappearing time
Memory recall Set user settings to factory preset value
Treble Adjust the Hi Frequency levels
Bass Adjust the Low Frequency levels
Balance Adjust the Spk output levels
Audio out Audio signal output On or Off
Surround Surround sound effect On or Off
Auto Scan TV program Auto Search
Tuner Mode Selections TV sources to Air or Cable
Channel Edit TV channel name edit

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

6

Channel Add/Del. TV channel Add or Delete
Parental TV program controlled by parents via password setting

RCU Key function

Power Soft power on or off
Picture Picture effect selections on Cinema, Sport, Vivid, Hi-bright, and User
Sound Sound effect selections on Rock, POP, Live, Dance, Techno, Classic, Soft,

and User
TV Swap analog TV (NTSC and PAL). Swap to TV when in other source
MTS Selection on Mono, Stereo and Sap sound
Sleep Set TV Power off time
Info Display current source input information

Mute Mute On or Off sound
0 ~ 9, 100/- Direct channel key number
Return Return to last channel
Guide Electric program guide on Digital TV
CH up/down Adjust channel up or channel down
Volume Adjust the Volume levels
Up/Down/Left/Right
arrows

Select or adjust the function of OSD

Fav.ch Switch to favorite channel
Fav.A/D Add or Del favorite channel
Menu Turn On or Off OSD main menu or exit current menu
Input Selections Input Source
Freeze To freeze the current image
Zoom Enlarge or shrink current image on the screen
Wide Adjust image size on Full, Wide1, Wide2, Wide3, 4:3, 16:9, No scale,

Normal
Enter Confirm the selection
PIP/POP Toggle to select PIP or POP function
P.Pos Adjust picture position of sub source during in PIP
P.size Adjust image size of sub source during in PIP
Swap Switch between main screen and sub screen during in PIP or POP
P.input Sub source selection during in PIP or POP
C.C Displaying captions during closed caption source and closed caption mode

select
V-chip Set V-chip rating

6. Remote Control Unit (RCU)

An IR remote control unit shall accompany this product along with battery. In addition,
this remote control unit shall have an operational distance of 5 meters and an operational
angle of 15 degrees for both horizontal and vertical.

Parameter Specification

Type IR; Made by Bontech Electronics Co., Ltd.

Range

Off axis ± 15° ≥ 5M

On axis: ≥ 7M
Life Testing
(Buttons)

100,000 cycle operations at a rate of 20~30 cycle / minute without load (with

battery)

Color

Painting Color - PANTONE 427C (Black for front bezel & back cover)

Power Key - PANTONE 032C (RED)

Key Pads – PANTONE 11C & PANTONE 5C(Cool Gray)

Texts Printed on Front Cover and Key Pads - PANTONE 427C, PANTONE

433C(Black)

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

7

7. Mechanical

The following table defines the mechanical specifications of this product for both chassis and
cabinet.

Parameter Specification

Dimension W=808mm, H=628mm and D=243mm
Net Weight 21.7kg(47.7 ib)
Chassis Plastic Material ABS (ABS HB / ABS VO / PC+ABS)
External Plastic Chassis
Components

Plastic Chassis, Cover, Stand, Lens and Button

Internal Plastic Cabinet
Components

N/A

Exterior Chassis Color “Black” Pantone 4001
Chassis Component’s Color
Difference

N/A (Only silver color on chassis)

Chassis Color Drift Due to
UV-Light

The color drift due to UL-Light shall be less than 10 “Delta
E” in the 1976 CIE L*a*b color space. Testing shall be
performed according to the requirements of ASTM Test

Method D4459-93.
Chassis Texture Front Bezel:N/A ; Back Cover:MT-11020
Molded Plastic Workmanship shall be inspected according to ViewSonic

Molded Plastic Parts Specification, VSCMPPSPEC001V1.2.
Screen Printed Parts, Bird Logo
Recess

Artwork shall be provided and confirmed by ViewSonic.

Rear Label A label identifying the product name, model/serial number

and FCC ID/Logo shall be placed into the rear label recess

located on the rear panel of the chassis.
Wall- Mount 400mmx200mm VESA high hole (n=6),pattren 6mm,1.0

pitch x 10mm long screw mounting kit not imcluded.

(Figure 7)

Sample Sample of textured color chips, plastic material specification,

and Material Safety Data Sheets shall be submitted to

ViewSonic prior to Mass Production Release.

In addition, all exterior surfaces shall have uniform texture/color.The maximum acceptable
gap between the buckets to bezel plastic pieces shall be within 1.5 mm. The maximum

acceptable gap between LCD panel and bezel shall be within 2.5 mm.

8. Environmental

Operating Temperature 0°C to +40°C

Storage Temperature -20°C to +60°C

Operating Relative Humidity 65% non-condensing

Storage Relative Humidity 85% non-condensing

Operating Altitude 0 to +3,000 meters above sea level

Storage Altitude 0 to +12,000 meters above sea level

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

8

3. Front Panel Function Control Description

Front View of the Product

1 2 3 4 5

6

87

Volume Down

Decrease sound volume or adjust a highlighted control while in OSD menu.

Volume Up

Increase sound volume or adjust a highlighted control while in OSD menu.

Menu

T

urn OSD menu ON/OFF.

CH Down

C

hannel down when source is at TV or select a control while in OSD menu.

CH Up

Channel up when source is at

TV or select a control while in OSD menu.

ENTER

T

o highlight a control in OSD menu.

Power ON/OFF button
Power LED Indicator / Remote Control Receiver

1

3

2

4

5

6

7

8

Note:

1. Press VOL+ and MENU buttons at the same time to lock power button, and press
VOL+ and MENU buttons again to unlock it.

2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press
VOL- and VOL+ buttons again to unlock it.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

9

Rear View of the Product

Analog TV input

Connect to NTSC, PAL M/N TV source.

S-Video input

Connect this port to the S-Video output of A/V device.

AV/ S-Video signal Audio input (left/right)

Connect this port to the RCA audio output connectors of your A/V device.

YPbPr signal Audio input (left/right)

Connect this port to the RCA audio output connectors of your A/V device.

YPbPr signal input

Connect this port to the

YPbPr output of A/V device.

Composite Video input

Connect this port to the composite video output of A/V device.

Audio output

C

onnect this port to your A/V device with audio in (RCA) connectors or to audio amplifier.

PC Audio input

Connect this port to PC line out jack.

VGA signal input

Connect this port to the VGA output of your PC.

HDMI Input Terminal

Connect this port to the HDMI output of A/V device.

Headphone Jack

Connect this port to your headphone.

Power (AC input)

Using power cord provided, connect to a power source.

I

F

E

C

D

B

H

G

A

E

D

A

B
C

F

G

I

H

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

10

Remote Control

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

11

ENGLISH

1 POWER Power ON/OFF

2

MTS Select Mono, Stereo or SAP in TV

3

INFO Display current information

4

SLEEP Set TV Sleep timer

5

SOUND Select sound modes

6

0~9, 100/- number button

Directly channel select

7

VOL+ and VOL- Adjust volume UP/DOWN

8

FAV.A/D To skip or restore Favorite Channels

9

UP/ DOWN/ LEFT/ RIGHT/
ENTER

UP/ DOWN/ LEFT/ RIGHT: Navigate and adjust OSD
function
ENTER: Enter the function setting

10

INPUT Input source select

11

ZOOM Adjust window size

12

FREEZE “Freeze-Frame” the current screen

13

P.POS Adjust sub-screen window position

14

P.SIZE Adjust sub-screen window size

15

MUTE Volume mute ON/OFF

16

TV Switch to TV when in any source

17

PICTURE Select picture modes

18

RETURN Return to previous channel

19

CH▲ and CH▼ Adjust Channel UP/DOWN

20

FAV. CH Select from preset Favorite Channels

21

MENU On Screen Display (OSD) menu ON/OFF

22

WIDE Change the image size

23

PIP/POP Toggle to enable/disable Picture in Picture/Picture Out of

Picture function

24

P.INPUT POP/PIP input source select

25

SWAP Switch between main screen and sub-screen

Note: PIP means Picture In Picture. POP means Picture Out Of Picture.

Remote control button function as follow

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

12

ENGLISH

Video Menu — Adjusting the picture quality

Video Menu is active in all but the VGA input source.

•

Contrast: To adjust contrast of video. (right: Max, left: Min.)

•

Brightness: To adjust luminance of video. (right: Max, left: Min.)

•

Color: To adjust color. (right: brilliant color, left: pale color.)

•

Tint: To adjust tint level. (right: greenish tone, left: reddish tone.)

•

Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)
Note: To adjust the Video settings, Smart Picture must be set to the User mode. (Select
through the Picture button on the remote control)

Audio Menu — To set the audio quality and status

Audio Menu is active in all but the VGA input source.

•

Bass: To adjust bass.

•

Treble: To adjust the treble.

•

Balance: To adjust left and right audio balance.

•

Surround: To enjoy a concert hall effect, select On when stereo is playing.

•

Audio Out: To control sound output ON/OFF from the RCA audio out connectors.
Note: To adjust the Audio settings, Smart Sound must be set to the User mode. (Select
through the Sound button on the remote control)

ADVANCED OPERATION — OSD MENU

OSD Functions

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

13

ENGLISH

TV Menu — To set up for TV

It is only active in TV source.

•

Tuner Mode: To select Cable or Air as the TV source.

•

Auto Scan: To auto scan the TV channels. Press ENTER to start auto scanning TV
channels. Press

ENTER again at any time to interrupt scanning.

•

TV: To select the TV channel to be skipped. Press ◄► to change channel.

•

Channel Add/Del.: Select Delete to skip the channel appointed, or select Add to restore
the channel appointed.

•

Channel Edit: Press ENTER to edit a name for the channel appointed. Use ▲▼◄► to
select the letters you want, and use

BackSpace key to delete backwards. Move the cursor

to

OK and then press ENTER to complete and save the channel name. To cancel editing,

choose

Cancel or exit without pressing OK.

Setup Menu — To set up OSD window

Setup Menu is active in all input sources.

•

Language: To select a OSD language from English, Portuguese or Spanish.

•

Parental: To set up parental control.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

14

ENGLISH

When you enter this control, the screen below will be displayed.

The factory default of the password is “0000”.
To enable parental control, input the password, press ▼ button to focus on

OK key, and

press

ENTER. (select Cancel if you want to exit)

After entering, the following screen will be shown.

Channel Lock: To lock channels. Use ◄► to select the channel you want to lock, and then
press

ENTER to lock or unlock it.

Change Password: To change the password, press ENTER and enter the password again.

Press

ENTER, and the following screen appears.

Enter the new password, use ▼ to move the cursor down, and then enter the new password
again, press

OK to confirm or Cancel to exit.
Note: Please make sure you remember your new password after changing, because you
cannot recall the default setting of the password by any selection.
Clear All: To clear all the locks set before, press

ENTER.

Press MENU to return to the previous page.

•

Color Temperature: To select the color temperature from Warm, Cold, Normal or User.
(If you select User, you can adjust the degree of R, G, B in Color Temp. to suit your
personal preference.)

•

Back Light: To adjust the luminance of the back light.

•

Aspect Ratio: To select image size between Normal, Full, Wide1, Wide2, Wide3, 4:3,
16:9, and No scale.

•

OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds)

•

Memory Recall: To restore the factory default settings.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

15

ENGLISH

PIP/POP

PIP/POP button allows you to watch two screens from different sources at the same time.
(PIP is picture in picture; POP is picture out of picture)
Press PIP/POP on the remote control repeatedly.
The screen will change from normal screen → PIP screen → POP screen.

•

PIP Input Source Select

1. Press P.INPUT button to select input source for sub-screen as following.

VGA Menu — To set up for computer

It is only active in VGA sources.

•

Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position,
fine tune and H-Size.

•

Contrast: To adjust contrast of the video.

•

Brightness: To adjust luminance of the video.

•

Fine Tune: To adjust the delay time of data and clock to reduce noise in picture.

•

Manual Clock: To adjust the horizontal pixel clock of the video.

•

H Position: To adjust the horizontal position of the picture.

•

V Position: To adjust the vertical position of the picture

POP Screen PIP Screen

Main Screen Available Sub-Screen Input Source
TV HDMI / YPbPr / VGA
HDMI TV / YPbPr / AV / S-Video / VGA
YPbPr TV / HDMI / AV / S-Video
AV HDMI / YPbPr / VGA
S-Video HDMI / YPbPr / VGA
VGA TV / HDMI / AV / S-Video

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

16

ENGLISH

•

PIP Size Select: Press P.SIZE to select the size of sub-screen. The function only acts on PIP.

•

PIP Position Select: Press P.POS to select the position of sub-screen. The function only

acts on PIP.

Note that the screen indexed with the pink frame is the screen you select to set up.
Use ◄► to move the index between the main screen and the sub-screen.

Notes:Initial password:0000
If you forget your initial password,you can press"8866"to resume.

•

SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound.

The function is available both in PIP and POP.

2. Use ◄► to select the sub-input source and press ENTER to confirm.

Note: To select the input source for main screen, press INPUT button.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

17

"MENU" Lock & Un-lock: Pressing "Vol+" and "Vol-" from Front Panel Keys.
"POWER" Lock & Un-lock: Pressing "Vol+" and "MENU" from Front Panel Keys.

4. Circuit Description

A. Analog Switch and Video input.

MT8202 is a highly integrated video and audio single chip processor for emerging
HDTV-Ready LCD TV. It includes one 3D/2D TV Decoder recovering the best image from
CVBS, and in addition, its analog input also support popular S-Video, Component, VGA vi deo
source. On-chip advanced motion adaptive de-interlacer (MDDitm) converts accordingly the
interlace video into smooth non-flicking progressive motion pictures.

Analog switch is built in MT8202 and accept CVBS, YPbPr, S-Video, RGB signal directly to
internal video front end. For most system application, there is no need to add external
components to add analog video multiplexer on board.

The video ADC sample analog input signals. After ADC, all signal processing is digital
domain.The source select multiplex all inputs from digital and analog video ports and route
them into Main and PIP data path.

B. 3D comb filter, Video Decoder, Deinterlacer and Scaling controller.

MT8202 includes 3D comb filter TV decoder to retrieve the best image from popular
composite signals. Embedded HDTV/VGA decoders let the high bandwidth input signals
perfectly reproduced. 24/16/8 bits digital port may accept all kinds of external digital input
video source. New 2nd generation advanced motion adaptive de-interlacer converts
accordingly the interlace video into progressive one with overlay of a 2D Graphic processor.
Advanced full function color processing with fu lly 10-bit path provides high quality video
contents. Independent two Flexible scalers provide wide adoption to various LCD panels for
two of different video sources at the same time. MT8202 supports alpha blending for Video
and two OSD planes. It also supports 10bit gamma correction and advanced dithering
processing for LCD display with 6/8/10 bit output.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

18

C. HDMI.

MT8293 is fully HDMI-compliant receiver that fits directly into home theater products such as
LCD TVs, plasma TVs and HDTVs. The receiver is capable of supporting bandwidths up to
165 MHz and video resolutions up to 1080p and UXGA. The MT8293 supports the

DVD-Audio standard, including 7.1- surround audio at 96kHz and stereo audio at 192kHz.

The built-in High-bandwidth Digital Content Protection (HDCP) decryption engine secures the
digital link for transmission of valuable high-definition v id eo and audio. Built-in HDCP

self-test engine simplifies manufacturing testing.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

19

MT8202

LCD Controller IC

MT8293

Digital audio interface

EEPROM for

EDID

EEPROM for

HDCP Key

HDMI

Conn

ector

12c interface

DVI

0~23,DE,Hsync,

Vsync,clk

CSDL,CSDA

PWR5V

DSDL,DSDA

KSDL,KSDA

12C interface

12C interface

CP10 interface

HDMI_HPD

TMDS0~3

HDMI_PLUG_POWER

MT8293 has 3 I2C interfaces.
LCD Controller IC use the CSDL/CSDA interface to access MT8293 registers.
MT8293 use KSDL/KSDA interface to read HDCP key from the EEPROM.
HDMI transmitter use DSDL/DSDA to access MT8293 HDCP related register.
HDMI Transmitter will pull high HDMI_PLUG_POWER (pin 18 in connector) when the
cable is connected. LCD Controller will pull high HDMI_HPD (pin 19 in connector) to info
the HDMI transmitter that the receiver is ready. The HDMI transmitter sends the video &
audio to MT8293 via 3 Data TMDS pairs & 1 CLOCK TMDS pairs.

Digital video signals are directly output from the MT8293 and then transfer them to the

MT8202 for advanced processing.

D. Audio

MT8202 incorporates a on-chip audio processor decodes whole world standard audio signals
from tuner with lip sync control, delivering high quality post-processed sound effect to

customers. Audio interface accept analog audio signal from Tuner, e.g. SIF or AF. It also
includes preprocessing circuit to filter the noisy audio sign als. Audio decoder will decode the
BTSC, and output best sound with enhanced 3D surround post-processing.

The AD12250 converts stereo single-ended analog input signals into 24-bit I2S digital audio
data through on-chip anti-aliasing filter, multi-bit Σ-Δ modulator, decimation filter and
high-pass filter which removes dc offsets. External analog audio signal , such as AV, S-video,
etc. is directly fed into AD12250 via a audio switch and converted to I2S digital audio data.
Digital audio, such as HDMI , have decoded by MT5351 and MT8293, is converted to I2S
digital audio already. The I2S digital audio data is decoded and processed by MT8202, and
then be delivered to AD8256 for audio amplifying.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

20

5. Adjusting Procedure

1. Function Test

1.1. Product

- 32” LCD TV

1.2. Test Equipment

-PC signal generator: CHROMA 2525 CARD ,CHROMA 2327 or 2329,Pioneer DV-S969AVi.

-TV and Video signal generator.

-Color analyzer: MINOLTA CA110.

-Power meter: CP-310A or CP-320A.

-AC power supply transformer: 110V/120V ±20% 60Hz ±5%.

-Digital ammeter

1.3. Test Condition

Before function test and alignment, each LCD TV should be run-in and warmed up for at least
30 minutes with the following conditions:
(a) In room temperature,
(b) With full-white screen, and 16 grey scale,
(c) With cycled display modes.

1.4. Test Display Modes & Pattern

1.4.1 EEPROM INIT
A. Timing: 1366*768@60Hz
B. Pattern: 16*12 pane
C. Press ’POWER’, ‘▲’and ‘ENTER’ at the same time, then go into the FACTORY

MODE.

Fig. 1 fig. 2

D. Figure 1,Select EEPROM INITIAL and press ENTER. The act of EEPROM INITIAL is

completed when EEPROM INIT disappeared.

1.4.2 COLOR TEMPERATURE ADJUSTING
PC MODE:

A. Timing: 1360*768@60Hz.
B. Pattern: 16 grey scale.
C. LCD TV should be run-in and warmed up for at least 30 minutes.
D. Make sure the distance between SENOR of the CA110 and the LCD TV is about

20cm.

E. Color Temperature adjusting.

1.Fig. 1: under the picture 16 grey scale of VGA source, select WHITE BALANCE
and press ENTER, The color warm will auto adjust. The act of EHITE BALANCEL is
completed when the picture is steady.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

21

2.After adjusting, switch to FULL WHITE and check the value of each color.
Preset color for N3250W-L

x=0.283±0.015 y=0.298±0.015

3.Under the picture NTSC color bar of YPbPr source, select WHITE BALANCE and

press ENTER, The color warm will auto adjust. The act of EHITE BALANCEL is
completed when EHITE BALANCEL disappeared.

4.After adjusting, switch to FULL WHITE and check the value of each color.

Preset color for N3250W-L

x=0.283±0.015 y=0.298±0.015

1.4.3 Power Consumption Check ( VGA MODE )
A. TIMING: 1360 x 768@60Hz
B. Pattern: 1010UPRIGHTNESS PATTERN
C. BRIGHTNESS=MAX, CONTRAST=MAX.
D. The power that each MODE consumed is shown in Chart 1.

MODE

MAX POWER COMSUMED POWER LED COLOR

NORMAL

150W(max) for 27”

200W(max) for 32”

GREEN

Stand-by

3 W (max) RED

Chart 1

1.4.4 Check the position of the picture displayed and phase auto adjusting (VGA MODE).
Depend on the TIMING of TIMING TABLE (TABLE 3) to switch MODE in order, stay
about 10 seconds each MODE, it can changed and stored automatically each MODE. We
can’t switch over to the next MODE until AUTO ADJUST disappears.

1.4.5 HDMI MODE FUNCTION TEST
A.DVI MODE: Depend on the TIMING of TIMING TABLE (TABLE 3 ) to check MODE
in order.
B.HDMI MODE: make sure the 480i, 480p,720p, 1080i TIMING is right.

1.4.6 OSD FUNCTION TEST
A. Time: 1360x768@60Hz
B. Pattern: 16*12 pane
C. Make sure that Each FUNCTION has one right action.

1.4.7 YPbPr, S-VIDEO, AV, TVS FUNCTION TEST

A. Input YPbPr, S-VIDEO, AV , TV’s signal and check.
B. Input USA air channel (TABLE 1) and USA CATV channel for TV channel.
C. Under YPbPr MODE, Make sure the 408i, 480P, 720P, 1080i is right.

1.4.8 AUDIO FUNCTION TEST

A. Audio input includes PC AUDIO IN, S-VIDEO/AV AUDIO IN and YPbPr AUDIO IN.
B. Under PC MODE, input PC AUDIO signal, checks whether the action of AUDIO IN is

right.

C. Under S-VIDEO/AV MODE, input L/R AUDIO signal, checks whether the action of

AUDIO IN is right.

D. Under YPbPr MODE, input L/R AUDIO signal, checks whether the action of AUDIO IN

is right.

E. Under HDMI MODE, checks whether the action of AUDIO IN is right.

F. AUDIO OUT FUNCTION TEST: Under all patterns except PC pattern, The Audio output
meets active extra speaker, examines whether the extra speaker makes the sound.

1.4.9 EARPHONE FUNCTION TEST

Under PC MODE, input PC AUDIO signal, determines whether the action of INT

SPEAKER output is right. Meets earphone with the EARPHONE, Determined whether the
action of EARPHONE output is normal.

1.4.10 All Modes Reset
After final QC step, we must to erase all saved changes again and restore the factory
defaults.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

22

You should do “All Mode Reset” again.
Turn off the LCD TV by pressing “Power” button.

TV Frequency Table:

U.S.A Channel (TABLE 1)

VIF 45.75 MHz, SIF 41.25 MHz

(Unit：MHz)

Ch. Freq.range fp (picture) fs (sound) fosc Ch. Freq.range fp (picture) fs (sound) fosc

2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42

54 – 60
60 – 66
66 – 72
76 – 82

82 – 88
174 – 180
180 – 186
186 – 192
192 – 198
198 – 204
204 – 210
210 – 216
470 – 476
476 – 482
482 – 488
488 – 494
494 – 500
500 – 506
506 – 512
512 – 518
518 – 524
524 – 530

530– 536
536 – 542
542 – 548
548 – 554
554 – 560
560 – 566
566 – 572
572 – 578
578 – 584
584 – 590
590 – 596
596 – 602
602 – 608
608 – 614
614 – 620
620 – 626
626 – 632
632 – 638
639 – 644

55.25

61.25

67.25

77.25

83.25

175.25

181.25

187.25

193.25

199.25

205.25

211.25

471.25

477.25

483.25

489.25

495.25

501.25

507.25

513.25

519.25

525.25

531.25

537.25

543.25

549.25

555.25

561.25

567.25

573.25

579.25

585.25

591.25

597.25

603.25

609.25

615.25

621.25

627.25

633.25

639.25

59.75

65.75

71.75

81.75

87.75

179.75

185.75

191.75

197.75

203.75

209.75

215.75

475.75

481.75

487.75

493.75

499.75

505.75

511.75

517.75

523.75

529.75

535.75

541.75

547.75

553.75

559.75

565.75

571.75

577.75

583.75

589.75

595.75

601.75

607.75

613.75

619.75

625.75

631.75

637.75

643.75

101.00

107.00

113.00

123.00

129.00

221.00

227.00

233.00

239.00

245.00

251.00

257.00

517.00

523.00

529.00

535.00

541.00

547.00

553.00

559.00

565.00

571.00

577.00

583.00

589.00

595.00

601.00

607.00

613.00

619.00

625.00

631.00

637.00

643.00

649.00

655.00

661.00

667.00

673.00

679.00

685.00

43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69

644 – 650
650 – 656
656 – 662
662 – 668
668 – 674
674 – 680
680 – 686
686 – 692
692 – 698
698 – 704
704 – 710
710 – 716
716 – 722
722 – 728
728 – 734
734 – 740
740 – 746
746 – 752
752 – 758
758 – 764
764 – 770
770 – 776
776 – 782
782 – 788
788 – 794
794 – 800
800 – 806

645.25

651.25

657.25

663.25

669.25

675.25

681.25

687.25

693.25

699.25

705.25

711.25

717.25

723.25

729.25

735.25

741.25

747.25

753.25

759.25

765.25

771.25

777.25

783.25

789.25

795.25

801.25

649.75

655.75

661.75

667.75

673.75

679.75

685.75

691.75

697.75

703.75

709.75

715.75

721.75

727.75

733.75

739.75

745.75

751.75

757.75

763.75

769.75

775.75

781.75

787.75

793.75

799.75

805.75

691.00

697.00

703.00

709.00

715.00

721.00

727.00

733.00

739.00

745.00

751.00

757.00

763.00

769.00

775.00

781.00

787.00

793.00

799.00

805.00

811.00

817.00

823.00

829.00

835.00

841.00

847.00

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

23

U.S.A. CATV (TABLE 2)
VIF 45.75 MHz, SIF 41.25 MHz

(Unit：MHz)

Ch. Freq.range fp

(picture)

fs (sound) fosc Ch. Freq.range fp

(picture)

fs

(sound)

fosc

2
3
4

5A

5

6
A-5
A-4
A-3
A-2
A-1

A

B

C

D

E

F

G

H

I
7
8
9

10

11
12
13

J
K
L

M

N
O
P
Q
R
S
T
U
V

W

AA

BB
CC

DD

EE

FF
GG
HH

II

2
3
4
1
5

6
95
96
97
98
99
14
15
16
17
18
19
20
21
22

7

8

9
10
11
12
13
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45

54 – 60
60 – 66
66 – 72
72 – 78
76 – 82
82 – 88
90 – 96

96 – 102
102 – 108
108 – 114
114 – 120
120 – 126
126 – 132
132 – 138
138 – 144
144 – 150
150 – 156
156 – 162
162 – 168
168 – 174
174 – 180
180 – 186
186 – 192
192 – 198
198 – 204
204 – 210
210 – 216
216 – 222
222 – 228
228 – 234
234 – 240
240 – 246
246 – 252
252 – 258
258 – 264
264 – 270
270 – 276
276 – 282
282 – 288
288 – 294
294 – 300
300 – 306
306 – 312
312 – 318
318 – 324
324 – 330
330 – 336
336 – 342
342 – 348
348 – 354

55.25

61.25

67.25

73.25

77.25

83.25

91.25

97.25

103.25

109.25

115.25

121.25

127.25

133.25

139.25

145.25

151.25

157.25

163.25

169.25

175.25

181.25

187.25

193.25

199.25

205.25

211.25

217.25

223.25

229.25

235.25

241.25

247.25

253.25

259.25

265.25

271.25

277.25

283.25

289.25

295.25

301.25

307.25

313.25

319.25

325.25

331.25

337.25

343.25

349.25

59.75

65.75

71.75

77.75

81.75

87.75

95.75

101.75

107.75

113.75

119.75

125.75

131.75

137.75

143.75

149.75

155.75

161.75

167.75

173.75

179.75

185.75

191.75

197.75

203.75

209.75

215.75

221.75

227.75

233.75

239.75

245.75

251.75

257.75

263.75

269.75

275.75

281.75

287.75

293.75

299.75

305.75

311.75

317.75

323.75

329.75

335.75

341.75

347.75

353.75

101.00

107.00

113.00

119.00

123.00

129.00

137.00

143.00

149.00

155.00

161.00

167.00

173.00

179.00

185.00

191.00

197.00

203.00

209.00

215.00

221.00

227.00

233.00

239.00

245.00

251.00

257.00

263.00

269.00

275.00

281.00

287.00

293.00

299.00

305.00

311.00

317.00

323.00

329.00

335.00

341.00

347.00

353.00

359.00

365.00

371.00

377.00

383.00

389.00

395.00

JJ

KK

LL

MM

NN
OO

PP
QQ
RR

SS

TT
UU
VV

WW

AAA

BBB
CCC

DDD

EEE

46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94

354 – 360
360 – 366
366 – 372
372 – 378
378 – 384
384 – 390
390 – 396
396 – 402
402 – 408
408 – 414
414 – 420
420 – 426
426 – 432
432 – 438
438 – 444
444 – 450
450 – 456
456 – 462
462 – 468
468 – 474
474 – 480
480 – 486
486 – 492
492 – 498
498 – 504
504 – 510
510 – 516
516 – 522
522 – 528
528 – 534
534 – 540
540 – 546
546 – 552
552 – 558
558 – 564
564 – 570
570 – 576
576 – 582
582 – 588
588 – 594
594 – 600
600 – 606
606 – 612
612 – 618
618 – 624
624 – 630
630 – 636
636 – 642
642 – 648

355.25

361.25

367.25

373.25

379.25

385.25

391.25

397.25

403.25

409.25

415.25

421.25

427.25

433.25

439.25

445.25

451.25

457.25

463.25

469.25

475.25

481.25

487.25

493.25

499.25

505.25

511.25

517.25

523.25

529.25

535.25

541.25

547.25

553.25

559.25

565.25

571.25

577.25

583.25

589.25

595.25

601.25

607.25

613.25

619.25

625.25

631.25

637.25

643.25

359.75

365.75

371.75

377.75

383.75

389.75

395.75

401.75

407.75

413.75

419.75

425.75

431.75

437.75

443.75

449.75

455.75

461.75

467.75

473.75

479.75

485.75

491.75

497.75

503.75

509.75

515.75

521.75

527.25

533.75

539.75

545.75

551.75

557.75

563.75

569.75

575.75

581.75

587.75

593.75

599.75

605.75

611.75

617.75

623.75

629.75

635.75

641.75

647.75

401.00

407.00

413.00

419.00

425.00

431.00

437.00

443.00

449.00

455.00

461.00

467.00

473.00

479.00

485.00

491.00

497.00

503.00

509.00

515.00

521.00

527.00

533.00

539.00

545.00

551.00

557.00

563.00

569.00

575.00

581.00

587.00

593.00

599.00

605.00

611.05

617.00

623.00

629.00

635.00

641.00

647.00

653.00

659.00

665.00

671.00

677.00

693.00

689.00

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

24

1.5. TV receiving test:

1.5.1 TV SIGNAL TEST ITEM

CENTRALISM TRANSMITTING SIGNAL CHECK CONTENT

SET CONTENT

CHANNEL

ORDER

FREQUENCY

(MHz)

PATTERN SOUND P/S(dB)

CHECK

CONTENT

CHANNEL 2

55.25 MONO SCOPE SWEEP TONE -10 ELECTRIC
ABNORMITY SOUND

CHANNEL 6

83.25 COLOR BAR 400Hz -10 SOUND ,PICTURE

CHANNEL 7

175.25 Full White (100
IRE)

STEREO -10 STERO FUNCTION

CHANNEL 13

211.25 STAIR DUAL -10 SUB FUNCTION

CHANNEL 14

471.25 MULTIBURST MONO -16 IMAGE AND SOUND

DISTURB

CHANNEL 36

603.25 MULTIBURST MONO -10 TEST Close-caption T1

FUNCTION

CHANNEL 69

801.25 MONO SCOPE MONO(1KHz) -10 NOISE LIMMITTED

SENSITIVITY

TV TEST METHOD

A.CHANNEL2 Examines sound by ear, whether the sound does have mechanical resonation and the
electrical unusual sound, and image to sound disturbance.
B.CHANNEL6: Check sound and picture.
C.CHANNEL7: Examines whether the sound does receive the image disturbance, Judgment basis:
Whether there is unusual sound, input signal LEVEL<=36dBu,and STEREO SENSITIVITY is normal.
D.CHANNEL13: Under main/sub/main-sub mode, check sub function.
E.CHANNEL14: Examines whether the sound does receive the image disturbance, Judgment basis:
Whether there is unusual sound.
F. CHANNEL 36:Check T1 of close-caption. Input signal level<=45dBu.
G.CHANNEL 69: Adjustment attenuator, If the critical point of the change of the image signal to noise
ratio is under LEVEL<=60dBu, regards as normally.

PRODUCTS OUTPUT CHECK ITEM.

A. The same as " CENTRALISM TRANSMITTING SIGNAL CHECK CONTENT"
B. saturation TEST, inputs the TV signal, the input signal LEVEL establishment most greatly is

90dBu,check whether CONTRAST of the image is normal; Whether appears the disturbance
phenomenon.

C.AFT CHECK,

(1) The frequency of the input TV signal is 211.25MHz (CH13), after confirmed the TV set receives

this signal, closure radio station; Then set frequency of the TV signal generator to be 212.25MHz,
turn on the TV set and check whether the TV set receives the signal of CH13.

(2). The frequency of the input TV signal is 211.25MHz (CH13), after confirmed the TV set receives

this signal, closure radio station; Then set frequency of the TV signal generator to be 212.00MHz,
turn on the TV set and check whether the TV set receives the signal of CH13.

(3). After all of FUNCTION TEST completed, we must erase all saved changes again and restore the

factory defaults.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

25

TIMING TABLE (FACTORY PRESET MODE) (TABLE 3)

ITEM

1 2 3 4

TIMING

640*480@60HZ 640 *480@75HZ 800 *600@60HZ 800*600@75HZ

Pixel Rate

25.175MHZ 31.500MHZ 40.000MHZ 49.500MHZ

H TOT AL

31.778us 26.667us 26.400us 21.333us

H DISPLAY

25.422us 20.317us 20.000us 16.162us

H B-Porch

1.907us 3.810us 2.200us 3.232us

H Width

3.813us 2.032us 3.200us 1.616us

H Border

0.318us 0.000us 0.000us 0.000us

V TOTAL

16.683ms 13.334ms 16.579ms 13.333ms

V DISPLAY

15.253ms 12.800ms 15.840ms 12.800ms

V B-Porch

1.049ms 0.427ms 0.607ms 0.448ms

Vs Width

0.064ms 0.080ms 0.106ms 0.064ms

V Border

0.254ms 0.000ms 0.000ms 0.000ms

H/V Sync

-/- -/- +/+ +/+

Interlace

No. No. No. No.

ITEM

5 6 7 8

TIMING

1024 ×768 60HZ 1024 ×768 75HZ 1280 ×720 60HZ 1280 ×768 60HZ

Pixel Rate

65.000MHZ 78.750MHZ 74.250MHZ 65.000MHZ

H TOT AL

20.677us 16.660us 22.222us 20.677us

H DISPLAY

15.754us 13.003us 17.239us 15.754us

H B-Porch

2.462us 2.235us 2.936us 2.462us

H Width

2.092us 1.219us 1.007us 2.092us

H Border

0.000us 0.000us 0.000us 0.000us

V TOTAL

16.666ms 13.328ms 16.667ms 16.666ms

V DISPLAY

15.880ms 12.795ms 16.000ms 15.880ms

V B-Porch

0.600ms 0.466ms 0.444ms 0.600ms

Vs Width

0.124ms 0.050ms 0.111ms 0.124ms

V Border

0.000ms 0.000ms 0.000ms 0.000ms

H/V Sync

-/- +/+ -/- -/-

Interlace

No. No. No. No.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

26

TIMING TABLE (FACTORY PRESET MODE) (TABLE 3)

ITEM

9 10 11 12

TIMING

1360 ×768 60HZ 1280 ×1024 60HZ

Pixel Rate

85.5MHZ 108MHZ

H TOTAL

20.959us 15.630us

H DISPLAY

15.906us 11.852us

H B-Porch

2.994us 2.296us

H Width

1.310us 1.037us

H Border

0.000us 0.000us

V TOTAL

16.662ms 16.661ms

V DISPLAY

16.097ms 16.005ms

V B-Po rch

0.377ms 0.594ms

Vs Width

0.126ms 0.047ms

V Border

0.00ms 0.00ms

H/V Sync

+/+ +/+

Interlace

No. No.

ViewSonic Corporation Confidential - Do Not Copy N3250w-1L

27