Viewsonic N3246W, N3746W User Manual

ViewSonic

N3246w/N3746w

LCD TV

- User Guide

- B edienung sa nl eitung

- Guida del l'utente

- Guide de l utilisateur

- Guía del usuario

Podręcznik użytkownika

Käyttöopas

Gebruiker Gids

οδηγός χρηστών

Brugervejledning

Användarhandbok

- Kullanιcι kιlavuzu

- Pyководство пользователя

ViewSonic

Model No. : VS11457-1E

VS11709-2E

Contents

Compliance Information..........................................................................................................1

Important Safety Instructions ................................................................................................. .2

Declaration of RoHS Compliance .......................................................................................... .3

Copyright Information..............................................................................................................4

Product Registration ...............................................................................................................4

Antenna Installation Instructions.............................................................................................5

Cleaning the LCD TV..............................................................................................................5

Getting Started

Package Contents...................................................................................................................6

Front View of the Product. ......................................................................................................7

Signal Source Interface Presentation from Rear View ........................................................... 8

Preparation............................................................................................................................ 13

Remote Control..................................................................................................................... 15

Teletext..................................................................................................................................16

Remote Control Battery Installation. ..................................................................................... 17

OSD Function

Analog OSD Functions. ........................................................................................................18

Digital OSD Functions...........................................................................................................25

PC Mode OSD Instruction. ...................................................................................................32

ENG LISH

Appendix

Tips........................................................................................................................................33

Product Specification. ...........................................................................................................34

Preset Timing Mode..............................................................................................................35

Troubleshooting ....................................................................................................................36

Glossary................................................................................................................................37

Customer Support................................................................................................................. 38

Limited Warranty ..........................................................................................................39

Compliance Information

CE Conformity for European Countries

ENG LISH

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

SRS and are registered trademarks of SRS Labs, Inc. This product is designed using SRS technology with permission from SRS Labs, Inc.

The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

AR46

ViewSonic N3246w/N3746w

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions.

7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, consult an electrician for replacement of the outlet.

10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the point where if emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this equipment when it will be unused for long periods of time.

14. Refer all servicing to qualified service personnel. Service is required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.

15. This product is only to perform the useful function of entertainment and visual display tasks are excluded.

ENG LISH

ViewSonic N3246w/N3746w

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive)

ENG LISH

and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance Proposed Maximum

Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% Cadmium (Cd) 0.01% < 0.01% Hexavalent Chromium (Cr6+) 0.1% < 0.1% Polybrominated biphenyls (PBB) 0.1% < 0.1% Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below: Examples of exempted components are:

1. Mercury in compact ﬂuorescent lamps not exceeding 5 mg per lamp and in other lamps not speciﬁcally mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

Actual Concentration

ViewSonic N3246w/N3746w

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com.

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal. The lamp in this product contains mercury. Please dispose of properly in accordance with environmental laws of your location.

Product Name:

Model Number: Document Number: Serial Number: Purchase Date:

For Your Records

N3246w / N3746w ViewSonic LCD TV VS11457-1E / VS11709-2E N3246w_N3746w_UG_ENG Rev.1C 03-30-07

ENG LISH

ViewSonic N3246w/N3746w

Antenna Installation Instructions

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product be sure the antenna

ENG LISH

or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off your LCD TV and wait for the weather to improve.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Cleaning the LCD Display

z Make sure the LCD TV is turned off. z Never spray or pour any Liquid directly onto the screen or case.

To clean the screen:

1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1. Use a soft, dry cloth.

2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

ViewSonic N3246w/N3746w

Getting Started

Congratulations on your purchase of a ViewSonic LCD TV display. Important! Save the original box and all packaging material for future shipping needs.

Package Contents

SCART cable

AV cable

Power cord (For UK use)

Power cord(For Pan Europe use)

Remote Control

QSG

ENG LISH

ViewSonic N3246w/N3746w

Front View of the Product

ENG LISH

Power : Press this button to turn on the TV or allow the TV to enter standby mode. It is

Menu : Press this button to display or exit the OSD menu. CH(▲ ): When the OSD menu appears, press these two buttons to select the

Vol(+ -) : When the OSD menu appears, press these two buttons to confirm the selected

Source: Press this button to display selected source, press ▲

located on the top middle corner of the TV. If the TV is in standby mode, the indicator at the front will illuminate amber.

item you want to execute; when no OSD menu appears, use to change channels in TV mode.

item; when no OSD menu appears, use to adjust the volume.

button to select.

ViewSonic N3246w/N3746w

Signal Source Interface Presentation from Rear View

There is a wide range of video and audio equipment that can be connected to your TV. The following connection diagrams show you how to connect them.

(15) (16)

(17) (18)

ENG LISH

(1)Power: Plug one end of the power cord to the “AC Input” jack in the rear of the TV, and

the other end to the 220V power socket. (2)Power switch: on/off TV. (3)SCART 2: CVBS+S-Video. (4)SCART 1: CVBS+RGB.

ViewSonic N3246w/N3746w

The following will show how to connect SCART connector

HOW TO CONNECT SCART connector

ENG LISH

Audio and Video CINCH sockets (AV IN) (AV)

To connect a VCR, a camcorder, a DVD player or a satellite receiver.

S-Video socket and Audio CINCH sockets (AV IN) (S-VIDEO) To connect an S-Video VCR or an S-Video camcorder.

Connect the three separate component video cables to the DVD player’s. Y, Pb and Pr ports and to the Y, Pb and Pr ports on the TV.

Connect the audio cables to the DVD player’s AUDIO L and R ports and to the L and R AUDIO AV ports on the TV.

Notes:

1. Additional equipment and cables shown are not supplied with this TV set.

2. The 21pin SCART socket can also be used as an output to Audio/Video equipment.

3. Select the desired VIDEO source input position by pushing the TV/VIDEO button on

remote controller.

4. In TV mode, when you switch on the VIDEO source which is connected to SCART

socket, the TV should automatically display the video signal. If it does not, press the TV/VIDEO button on remote controller in order to select the appropriate source.

5. The AUDIO OUT (SCART) terminal provides a fixed level output only. (The menu

settings and remote control volume controls have no effect.)

SCART (SCART IN) (PERITEL)

To connect a VCR, a camcorder, a DVD player, a satellite receiver, a decoder or a games console.

SCART socket is an input/output socket.

ViewSonic N3246w/N3746w

(5) HDTV: Connect the component signal source of audio and video (DVD player, Laser

Disc player, videocassette recorder or camcorder) to the Component Input port.

The following will illustrate how to set a DVD player outputting component signal.

(1)How to connect:

1. Use three component signal cables

to connect the high definition signal Y, Pb, Pr or the component signal Y, Cb, Cr the DVD player outputs to the high definition signal Y, Pb, Pr Input of the TV.

2. Use the audio cable to connect the audio output of the DVD player to the TV’s Component Input.

(2)How to use:

1. Select high definition signal (HDTV) input.

2. Turn on the DVD player, then press the PLAY button.

(6)Audio 2 in: Connect the audio signal source (PC, DVD player, Laser Disc player,

videocassette recorder or camcorder) to the video.

(7)Video in: Connect the video signal source (PC, DVD player, Laser Disc player,

videocassette recorder or camcorder) to the audio Input ports (left and right).( HDTV and AV2 in share this audio )

(8)Audio output: User can use this connector to output other audio dives. (9)Analog RF Tuner: Connect the antenna or CATV cable to this 75 coaxial cable input. (10)Digital RF Tuner: Connect the antenna cable of digital signal. (11)Audio: Input the audio signal from a PC through this interface. (12)VGA: Use the VGA signal cable to connect signals from a PC to the TV Input.

Note: For the connection between the PC and the TV, (see Figure 1) below.

ENG LISH

(Figure 1)

(1)How to connect to the PC mainframe:

VGA interface – Connect the VGA signal cable supplied with the TV to the D-sub

interface at the rear of the TV as in. (Figure 1)

Digital interface – Connect the DVI signal cable to the digital interface at the rear of

the TV as in. (Figure 1)

(2)How to connect the audio cable:

Connect the PC audio cable supplied with the TV to the TV’s PC Audio Input as in. (Figure 1)

Note: If no signal is present on the VGA or DVI screen, the TV will enter into standby mode automatically after 1 minute.

ViewSonic N3246w/N3746w

(13)HDMI: HDMI is the leading new standard for Digital video and audio interconnection.

To the HDMI connector you can connect HDMI devices such as a Set Top Box or compatible DVD-R or DVD player with HDMI export, or DVI-equipped devices like a computer. So you can display high-definition pictures on this TV in the digital form.

ENG LISH

(1)How to use HDMI:

1. Connect one HDMI to the “HDMI” port and connect the other HDMI to device with HDMI export as left figure Select the T-Line button

2. Press Video button 5 times to select HDMI in the remote control (see right figure) Left figure

3. The HDMI connectors allow the following TV and monitor

display mod:

SDTV 720x576i, 50Hz /720x480i, 60Hz

EDTV 720x576p 50Hz /640x480p 60Hz HDTV 1920x1080i 50/60Hz 1280x720p 50/60Hz VGA 640x480 60Hz

Notes:

1.Your TV supports HDCP(High-bandwidth Digital Content Protection).This Is a system for protecting DVD content outputted via DVI from being copied. It provides a secure digital link between a video source (DVD, PC, etc.) and your TV. Content is encrypted at the source device to prevent unauthorized copies from being made.

2.Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.

3.In case no signal is detected from your HDMI device, turn off the HDMI device and then on again.

4.To get an optimal viewing, it is advised to turn your DVD player to one of the following TV display standards:1280x720p 50hz.

(14)CA Card slot: Use for Digital pay card and updated firmware. (15)S-Video Input: Connect the S-Video cable to DVD player, Laser Disc player,

videocassette recorder or camcorder.

(16)Video Input: Connect the video signal source. (PC, DVD player, Laser Disc player,

videocassette recorder or camcorder) (The audio is for S-Video and Video 1)

(17)Audio Input: Connect the audio signal source. (PC, DVD player, Laser Disc player,

videocassette recorder or camcorder) to the Audio Input ports.

ViewSonic N3246w/N3746w

+ 29 hidden pages